Export limit exceeded: 350231 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (350231 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2025-39685 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-05-12 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: comedi: pcl726: Prevent invalid irq number The reproducer passed in an irq number(0x80008000) that was too large, which triggered the oob. Added an interrupt number check to prevent users from passing in an irq number that was too large. If `it->options[1]` is 31, then `1 << it->options[1]` is still invalid because it shifts a 1-bit into the sign bit (which is UB in C). Possible solutions include reducing the upper bound on the `it->options[1]` value to 30 or lower, or using `1U << it->options[1]`. The old code would just not attempt to request the IRQ if the `options[1]` value were invalid. And it would still configure the device without interrupts even if the call to `request_irq` returned an error. So it would be better to combine this test with the test below. | ||||
| CVE-2025-39684 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-05-12 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: comedi: Fix use of uninitialized memory in do_insn_ioctl() and do_insnlist_ioctl() syzbot reports a KMSAN kernel-infoleak in `do_insn_ioctl()`. A kernel buffer is allocated to hold `insn->n` samples (each of which is an `unsigned int`). For some instruction types, `insn->n` samples are copied back to user-space, unless an error code is being returned. The problem is that not all the instruction handlers that need to return data to userspace fill in the whole `insn->n` samples, so that there is an information leak. There is a similar syzbot report for `do_insnlist_ioctl()`, although it does not have a reproducer for it at the time of writing. One culprit is `insn_rw_emulate_bits()` which is used as the handler for `INSN_READ` or `INSN_WRITE` instructions for subdevices that do not have a specific handler for that instruction, but do have an `INSN_BITS` handler. For `INSN_READ` it only fills in at most 1 sample, so if `insn->n` is greater than 1, the remaining `insn->n - 1` samples copied to userspace will be uninitialized kernel data. Another culprit is `vm80xx_ai_insn_read()` in the "vm80xx" driver. It never returns an error, even if it fails to fill the buffer. Fix it in `do_insn_ioctl()` and `do_insnlist_ioctl()` by making sure that uninitialized parts of the allocated buffer are zeroed before handling each instruction. Thanks to Arnaud Lecomte for their fix to `do_insn_ioctl()`. That fix replaced the call to `kmalloc_array()` with `kcalloc()`, but it is not always necessary to clear the whole buffer. | ||||
| CVE-2025-39683 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-05-12 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: tracing: Limit access to parser->buffer when trace_get_user failed When the length of the string written to set_ftrace_filter exceeds FTRACE_BUFF_MAX, the following KASAN alarm will be triggered: BUG: KASAN: slab-out-of-bounds in strsep+0x18c/0x1b0 Read of size 1 at addr ffff0000d00bd5ba by task ash/165 CPU: 1 UID: 0 PID: 165 Comm: ash Not tainted 6.16.0-g6bcdbd62bd56-dirty Hardware name: linux,dummy-virt (DT) Call trace: show_stack+0x34/0x50 (C) dump_stack_lvl+0xa0/0x158 print_address_description.constprop.0+0x88/0x398 print_report+0xb0/0x280 kasan_report+0xa4/0xf0 __asan_report_load1_noabort+0x20/0x30 strsep+0x18c/0x1b0 ftrace_process_regex.isra.0+0x100/0x2d8 ftrace_regex_release+0x484/0x618 __fput+0x364/0xa58 ____fput+0x28/0x40 task_work_run+0x154/0x278 do_notify_resume+0x1f0/0x220 el0_svc+0xec/0xf0 el0t_64_sync_handler+0xa0/0xe8 el0t_64_sync+0x1ac/0x1b0 The reason is that trace_get_user will fail when processing a string longer than FTRACE_BUFF_MAX, but not set the end of parser->buffer to 0. Then an OOB access will be triggered in ftrace_regex_release-> ftrace_process_regex->strsep->strpbrk. We can solve this problem by limiting access to parser->buffer when trace_get_user failed. | ||||
| CVE-2025-39682 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-05-12 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: tls: fix handling of zero-length records on the rx_list Each recvmsg() call must process either - only contiguous DATA records (any number of them) - one non-DATA record If the next record has different type than what has already been processed we break out of the main processing loop. If the record has already been decrypted (which may be the case for TLS 1.3 where we don't know type until decryption) we queue the pending record to the rx_list. Next recvmsg() will pick it up from there. Queuing the skb to rx_list after zero-copy decrypt is not possible, since in that case we decrypted directly to the user space buffer, and we don't have an skb to queue (darg.skb points to the ciphertext skb for access to metadata like length). Only data records are allowed zero-copy, and we break the processing loop after each non-data record. So we should never zero-copy and then find out that the record type has changed. The corner case we missed is when the initial record comes from rx_list, and it's zero length. | ||||
| CVE-2025-39681 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-05-12 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: x86/cpu/hygon: Add missing resctrl_cpu_detect() in bsp_init helper Since 923f3a2b48bd ("x86/resctrl: Query LLC monitoring properties once during boot") resctrl_cpu_detect() has been moved from common CPU initialization code to the vendor-specific BSP init helper, while Hygon didn't put that call in their code. This triggers a division by zero fault during early booting stage on our machines with X86_FEATURE_CQM* supported, where get_rdt_mon_resources() tries to calculate mon_l3_config with uninitialized boot_cpu_data.x86_cache_occ_scale. Add the missing resctrl_cpu_detect() in the Hygon BSP init helper. [ bp: Massage commit message. ] | ||||
| CVE-2025-39676 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-05-12 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: scsi: qla4xxx: Prevent a potential error pointer dereference The qla4xxx_get_ep_fwdb() function is supposed to return NULL on error, but qla4xxx_ep_connect() returns error pointers. Propagating the error pointers will lead to an Oops in the caller, so change the error pointers to NULL. | ||||
| CVE-2025-39675 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-05-12 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Add null pointer check in mod_hdcp_hdcp1_create_session() The function mod_hdcp_hdcp1_create_session() calls the function get_first_active_display(), but does not check its return value. The return value is a null pointer if the display list is empty. This will lead to a null pointer dereference. Add a null pointer check for get_first_active_display() and return MOD_HDCP_STATUS_DISPLAY_NOT_FOUND if the function return null. This is similar to the commit c3e9826a2202 ("drm/amd/display: Add null pointer check for get_first_active_display()"). (cherry picked from commit 5e43eb3cd731649c4f8b9134f857be62a416c893) | ||||
| CVE-2025-39673 | 2 Debian, Linux | 3 Debian Linux, Linux, Linux Kernel | 2026-05-12 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ppp: fix race conditions in ppp_fill_forward_path ppp_fill_forward_path() has two race conditions: 1. The ppp->channels list can change between list_empty() and list_first_entry(), as ppp_lock() is not held. If the only channel is deleted in ppp_disconnect_channel(), list_first_entry() may access an empty head or a freed entry, and trigger a panic. 2. pch->chan can be NULL. When ppp_unregister_channel() is called, pch->chan is set to NULL before pch is removed from ppp->channels. Fix these by using a lockless RCU approach: - Use list_first_or_null_rcu() to safely test and access the first list entry. - Convert list modifications on ppp->channels to their RCU variants and add synchronize_net() after removal. - Check for a NULL pch->chan before dereferencing it. | ||||
| CVE-2025-38736 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-05-12 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: net: usb: asix_devices: Fix PHY address mask in MDIO bus initialization Syzbot reported shift-out-of-bounds exception on MDIO bus initialization. The PHY address should be masked to 5 bits (0-31). Without this mask, invalid PHY addresses could be used, potentially causing issues with MDIO bus operations. Fix this by masking the PHY address with 0x1f (31 decimal) to ensure it stays within the valid range. | ||||
| CVE-2025-38735 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-05-12 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: gve: prevent ethtool ops after shutdown A crash can occur if an ethtool operation is invoked after shutdown() is called. shutdown() is invoked during system shutdown to stop DMA operations without performing expensive deallocations. It is discouraged to unregister the netdev in this path, so the device may still be visible to userspace and kernel helpers. In gve, shutdown() tears down most internal data structures. If an ethtool operation is dispatched after shutdown(), it will dereference freed or NULL pointers, leading to a kernel panic. While graceful shutdown normally quiesces userspace before invoking the reboot syscall, forced shutdowns (as observed on GCP VMs) can still trigger this path. Fix by calling netif_device_detach() in shutdown(). This marks the device as detached so the ethtool ioctl handler will skip dispatching operations to the driver. | ||||
| CVE-2025-38732 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-05-12 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_reject: don't leak dst refcount for loopback packets recent patches to add a WARN() when replacing skb dst entry found an old bug: WARNING: include/linux/skbuff.h:1165 skb_dst_check_unset include/linux/skbuff.h:1164 [inline] WARNING: include/linux/skbuff.h:1165 skb_dst_set include/linux/skbuff.h:1210 [inline] WARNING: include/linux/skbuff.h:1165 nf_reject_fill_skb_dst+0x2a4/0x330 net/ipv4/netfilter/nf_reject_ipv4.c:234 [..] Call Trace: nf_send_unreach+0x17b/0x6e0 net/ipv4/netfilter/nf_reject_ipv4.c:325 nft_reject_inet_eval+0x4bc/0x690 net/netfilter/nft_reject_inet.c:27 expr_call_ops_eval net/netfilter/nf_tables_core.c:237 [inline] .. This is because blamed commit forgot about loopback packets. Such packets already have a dst_entry attached, even at PRE_ROUTING stage. Instead of checking hook just check if the skb already has a route attached to it. | ||||
| CVE-2025-38729 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-05-12 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: usb-audio: Validate UAC3 power domain descriptors, too UAC3 power domain descriptors need to be verified with its variable bLength for avoiding the unexpected OOB accesses by malicious firmware, too. | ||||
| CVE-2025-38728 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-05-12 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: smb3: fix for slab out of bounds on mount to ksmbd With KASAN enabled, it is possible to get a slab out of bounds during mount to ksmbd due to missing check in parse_server_interfaces() (see below): BUG: KASAN: slab-out-of-bounds in parse_server_interfaces+0x14ee/0x1880 [cifs] Read of size 4 at addr ffff8881433dba98 by task mount/9827 CPU: 5 UID: 0 PID: 9827 Comm: mount Tainted: G OE 6.16.0-rc2-kasan #2 PREEMPT(voluntary) Tainted: [O]=OOT_MODULE, [E]=UNSIGNED_MODULE Hardware name: Dell Inc. Precision Tower 3620/0MWYPT, BIOS 2.13.1 06/14/2019 Call Trace: <TASK> dump_stack_lvl+0x9f/0xf0 print_report+0xd1/0x670 __virt_addr_valid+0x22c/0x430 ? parse_server_interfaces+0x14ee/0x1880 [cifs] ? kasan_complete_mode_report_info+0x2a/0x1f0 ? parse_server_interfaces+0x14ee/0x1880 [cifs] kasan_report+0xd6/0x110 parse_server_interfaces+0x14ee/0x1880 [cifs] __asan_report_load_n_noabort+0x13/0x20 parse_server_interfaces+0x14ee/0x1880 [cifs] ? __pfx_parse_server_interfaces+0x10/0x10 [cifs] ? trace_hardirqs_on+0x51/0x60 SMB3_request_interfaces+0x1ad/0x3f0 [cifs] ? __pfx_SMB3_request_interfaces+0x10/0x10 [cifs] ? SMB2_tcon+0x23c/0x15d0 [cifs] smb3_qfs_tcon+0x173/0x2b0 [cifs] ? __pfx_smb3_qfs_tcon+0x10/0x10 [cifs] ? cifs_get_tcon+0x105d/0x2120 [cifs] ? do_raw_spin_unlock+0x5d/0x200 ? cifs_get_tcon+0x105d/0x2120 [cifs] ? __pfx_smb3_qfs_tcon+0x10/0x10 [cifs] cifs_mount_get_tcon+0x369/0xb90 [cifs] ? dfs_cache_find+0xe7/0x150 [cifs] dfs_mount_share+0x985/0x2970 [cifs] ? check_path.constprop.0+0x28/0x50 ? save_trace+0x54/0x370 ? __pfx_dfs_mount_share+0x10/0x10 [cifs] ? __lock_acquire+0xb82/0x2ba0 ? __kasan_check_write+0x18/0x20 cifs_mount+0xbc/0x9e0 [cifs] ? __pfx_cifs_mount+0x10/0x10 [cifs] ? do_raw_spin_unlock+0x5d/0x200 ? cifs_setup_cifs_sb+0x29d/0x810 [cifs] cifs_smb3_do_mount+0x263/0x1990 [cifs] | ||||
| CVE-2025-38727 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-05-12 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: netlink: avoid infinite retry looping in netlink_unicast() netlink_attachskb() checks for the socket's read memory allocation constraints. Firstly, it has: rmem < READ_ONCE(sk->sk_rcvbuf) to check if the just increased rmem value fits into the socket's receive buffer. If not, it proceeds and tries to wait for the memory under: rmem + skb->truesize > READ_ONCE(sk->sk_rcvbuf) The checks don't cover the case when skb->truesize + sk->sk_rmem_alloc is equal to sk->sk_rcvbuf. Thus the function neither successfully accepts these conditions, nor manages to reschedule the task - and is called in retry loop for indefinite time which is caught as: rcu: INFO: rcu_sched self-detected stall on CPU rcu: 0-....: (25999 ticks this GP) idle=ef2/1/0x4000000000000000 softirq=262269/262269 fqs=6212 (t=26000 jiffies g=230833 q=259957) NMI backtrace for cpu 0 CPU: 0 PID: 22 Comm: kauditd Not tainted 5.10.240 #68 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.17.0-4.fc42 04/01/2014 Call Trace: <IRQ> dump_stack lib/dump_stack.c:120 nmi_cpu_backtrace.cold lib/nmi_backtrace.c:105 nmi_trigger_cpumask_backtrace lib/nmi_backtrace.c:62 rcu_dump_cpu_stacks kernel/rcu/tree_stall.h:335 rcu_sched_clock_irq.cold kernel/rcu/tree.c:2590 update_process_times kernel/time/timer.c:1953 tick_sched_handle kernel/time/tick-sched.c:227 tick_sched_timer kernel/time/tick-sched.c:1399 __hrtimer_run_queues kernel/time/hrtimer.c:1652 hrtimer_interrupt kernel/time/hrtimer.c:1717 __sysvec_apic_timer_interrupt arch/x86/kernel/apic/apic.c:1113 asm_call_irq_on_stack arch/x86/entry/entry_64.S:808 </IRQ> netlink_attachskb net/netlink/af_netlink.c:1234 netlink_unicast net/netlink/af_netlink.c:1349 kauditd_send_queue kernel/audit.c:776 kauditd_thread kernel/audit.c:897 kthread kernel/kthread.c:328 ret_from_fork arch/x86/entry/entry_64.S:304 Restore the original behavior of the check which commit in Fixes accidentally missed when restructuring the code. Found by Linux Verification Center (linuxtesting.org). | ||||
| CVE-2025-38725 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-05-12 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: usb: asix_devices: add phy_mask for ax88772 mdio bus Without setting phy_mask for ax88772 mdio bus, current driver may create at most 32 mdio phy devices with phy address range from 0x00 ~ 0x1f. DLink DUB-E100 H/W Ver B1 is such a device. However, only one main phy device will bind to net phy driver. This is creating issue during system suspend/resume since phy_polling_mode() in phy_state_machine() will directly deference member of phydev->drv for non-main phy devices. Then NULL pointer dereference issue will occur. Due to only external phy or internal phy is necessary, add phy_mask for ax88772 mdio bus to workarnoud the issue. | ||||
| CVE-2025-38724 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-05-12 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: nfsd: handle get_client_locked() failure in nfsd4_setclientid_confirm() Lei Lu recently reported that nfsd4_setclientid_confirm() did not check the return value from get_client_locked(). a SETCLIENTID_CONFIRM could race with a confirmed client expiring and fail to get a reference. That could later lead to a UAF. Fix this by getting a reference early in the case where there is an extant confirmed client. If that fails then treat it as if there were no confirmed client found at all. In the case where the unconfirmed client is expiring, just fail and return the result from get_client_locked(). | ||||
| CVE-2025-38723 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-05-12 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: LoongArch: BPF: Fix jump offset calculation in tailcall The extra pass of bpf_int_jit_compile() skips JIT context initialization which essentially skips offset calculation leaving out_offset = -1, so the jmp_offset in emit_bpf_tail_call is calculated by "#define jmp_offset (out_offset - (cur_offset))" is a negative number, which is wrong. The final generated assembly are as follow. 54: bgeu $a2, $t1, -8 # 0x0000004c 58: addi.d $a6, $s5, -1 5c: bltz $a6, -16 # 0x0000004c 60: alsl.d $t2, $a2, $a1, 0x3 64: ld.d $t2, $t2, 264 68: beq $t2, $zero, -28 # 0x0000004c Before apply this patch, the follow test case will reveal soft lock issues. cd tools/testing/selftests/bpf/ ./test_progs --allow=tailcalls/tailcall_bpf2bpf_1 dmesg: watchdog: BUG: soft lockup - CPU#2 stuck for 26s! [test_progs:25056] | ||||
| CVE-2025-38721 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-05-12 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: ctnetlink: fix refcount leak on table dump There is a reference count leak in ctnetlink_dump_table(): if (res < 0) { nf_conntrack_get(&ct->ct_general); // HERE cb->args[1] = (unsigned long)ct; ... While its very unlikely, its possible that ct == last. If this happens, then the refcount of ct was already incremented. This 2nd increment is never undone. This prevents the conntrack object from being released, which in turn keeps prevents cnet->count from dropping back to 0. This will then block the netns dismantle (or conntrack rmmod) as nf_conntrack_cleanup_net_list() will wait forever. This can be reproduced by running conntrack_resize.sh selftest in a loop. It takes ~20 minutes for me on a preemptible kernel on average before I see a runaway kworker spinning in nf_conntrack_cleanup_net_list. One fix would to change this to: if (res < 0) { if (ct != last) nf_conntrack_get(&ct->ct_general); But this reference counting isn't needed in the first place. We can just store a cookie value instead. A followup patch will do the same for ctnetlink_exp_dump_table, it looks to me as if this has the same problem and like ctnetlink_dump_table, we only need a 'skip hint', not the actual object so we can apply the same cookie strategy there as well. | ||||
| CVE-2025-38715 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-05-12 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: hfs: fix slab-out-of-bounds in hfs_bnode_read() This patch introduces is_bnode_offset_valid() method that checks the requested offset value. Also, it introduces check_and_correct_requested_length() method that checks and correct the requested length (if it is necessary). These methods are used in hfs_bnode_read(), hfs_bnode_write(), hfs_bnode_clear(), hfs_bnode_copy(), and hfs_bnode_move() with the goal to prevent the access out of allocated memory and triggering the crash. | ||||
| CVE-2025-38714 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-05-12 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: hfsplus: fix slab-out-of-bounds in hfsplus_bnode_read() The hfsplus_bnode_read() method can trigger the issue: [ 174.852007][ T9784] ================================================================== [ 174.852709][ T9784] BUG: KASAN: slab-out-of-bounds in hfsplus_bnode_read+0x2f4/0x360 [ 174.853412][ T9784] Read of size 8 at addr ffff88810b5fc6c0 by task repro/9784 [ 174.854059][ T9784] [ 174.854272][ T9784] CPU: 1 UID: 0 PID: 9784 Comm: repro Not tainted 6.16.0-rc3 #7 PREEMPT(full) [ 174.854281][ T9784] Hardware name: QEMU Ubuntu 24.04 PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 [ 174.854286][ T9784] Call Trace: [ 174.854289][ T9784] <TASK> [ 174.854292][ T9784] dump_stack_lvl+0x10e/0x1f0 [ 174.854305][ T9784] print_report+0xd0/0x660 [ 174.854315][ T9784] ? __virt_addr_valid+0x81/0x610 [ 174.854323][ T9784] ? __phys_addr+0xe8/0x180 [ 174.854330][ T9784] ? hfsplus_bnode_read+0x2f4/0x360 [ 174.854337][ T9784] kasan_report+0xc6/0x100 [ 174.854346][ T9784] ? hfsplus_bnode_read+0x2f4/0x360 [ 174.854354][ T9784] hfsplus_bnode_read+0x2f4/0x360 [ 174.854362][ T9784] hfsplus_bnode_dump+0x2ec/0x380 [ 174.854370][ T9784] ? __pfx_hfsplus_bnode_dump+0x10/0x10 [ 174.854377][ T9784] ? hfsplus_bnode_write_u16+0x83/0xb0 [ 174.854385][ T9784] ? srcu_gp_start+0xd0/0x310 [ 174.854393][ T9784] ? __mark_inode_dirty+0x29e/0xe40 [ 174.854402][ T9784] hfsplus_brec_remove+0x3d2/0x4e0 [ 174.854411][ T9784] __hfsplus_delete_attr+0x290/0x3a0 [ 174.854419][ T9784] ? __pfx_hfs_find_1st_rec_by_cnid+0x10/0x10 [ 174.854427][ T9784] ? __pfx___hfsplus_delete_attr+0x10/0x10 [ 174.854436][ T9784] ? __asan_memset+0x23/0x50 [ 174.854450][ T9784] hfsplus_delete_all_attrs+0x262/0x320 [ 174.854459][ T9784] ? __pfx_hfsplus_delete_all_attrs+0x10/0x10 [ 174.854469][ T9784] ? rcu_is_watching+0x12/0xc0 [ 174.854476][ T9784] ? __mark_inode_dirty+0x29e/0xe40 [ 174.854483][ T9784] hfsplus_delete_cat+0x845/0xde0 [ 174.854493][ T9784] ? __pfx_hfsplus_delete_cat+0x10/0x10 [ 174.854507][ T9784] hfsplus_unlink+0x1ca/0x7c0 [ 174.854516][ T9784] ? __pfx_hfsplus_unlink+0x10/0x10 [ 174.854525][ T9784] ? down_write+0x148/0x200 [ 174.854532][ T9784] ? __pfx_down_write+0x10/0x10 [ 174.854540][ T9784] vfs_unlink+0x2fe/0x9b0 [ 174.854549][ T9784] do_unlinkat+0x490/0x670 [ 174.854557][ T9784] ? __pfx_do_unlinkat+0x10/0x10 [ 174.854565][ T9784] ? __might_fault+0xbc/0x130 [ 174.854576][ T9784] ? getname_flags.part.0+0x1c5/0x550 [ 174.854584][ T9784] __x64_sys_unlink+0xc5/0x110 [ 174.854592][ T9784] do_syscall_64+0xc9/0x480 [ 174.854600][ T9784] entry_SYSCALL_64_after_hwframe+0x77/0x7f [ 174.854608][ T9784] RIP: 0033:0x7f6fdf4c3167 [ 174.854614][ T9784] Code: f0 ff ff 73 01 c3 48 8b 0d 26 0d 0e 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 08 [ 174.854622][ T9784] RSP: 002b:00007ffcb948bca8 EFLAGS: 00000206 ORIG_RAX: 0000000000000057 [ 174.854630][ T9784] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f6fdf4c3167 [ 174.854636][ T9784] RDX: 00007ffcb948bcc0 RSI: 00007ffcb948bcc0 RDI: 00007ffcb948bd50 [ 174.854641][ T9784] RBP: 00007ffcb948cd90 R08: 0000000000000001 R09: 00007ffcb948bb40 [ 174.854645][ T9784] R10: 00007f6fdf564fc0 R11: 0000000000000206 R12: 0000561e1bc9c2d0 [ 174.854650][ T9784] R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 [ 174.854658][ T9784] </TASK> [ 174.854661][ T9784] [ 174.879281][ T9784] Allocated by task 9784: [ 174.879664][ T9784] kasan_save_stack+0x20/0x40 [ 174.880082][ T9784] kasan_save_track+0x14/0x30 [ 174.880500][ T9784] __kasan_kmalloc+0xaa/0xb0 [ 174.880908][ T9784] __kmalloc_noprof+0x205/0x550 [ 174.881337][ T9784] __hfs_bnode_create+0x107/0x890 [ 174.881779][ T9784] hfsplus_bnode_find+0x2d0/0xd10 [ 174.882222][ T9784] hfsplus_brec_find+0x2b0/0x520 [ 174.882659][ T9784] hfsplus_delete_all_attrs+0x23b/0x3 ---truncated--- | ||||