Export limit exceeded: 403124 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (403124 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-93206 | 1 Linux | 1 Linux Kernel | 2026-09-26 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: PCI/proc: Use file_ns_capable() when checking config space read access proc_bus_pci_read() decides how much of the config space is readable based on capable(CAP_SYS_ADMIN), which checks the credentials of the task calling read(), not the credentials of the process that opened the file. The sysfs equivalent, pci_read_config(), has checked the credentials of the opening process since commit de139a339395 ("pci: check caps from sysfs file open to read device dependent config space"), so a privileged process can open the config space file and pass the file descriptor to an unprivileged process (for example, a process running a KVM guest with an assigned device), which can then read the entire config space. The check was subsequently routed through the LSM framework in commit 47970b1b2aa6 ("pci: use security_capable() when checking capablities during config space read") and converted to the dedicated helper in commit ab0fa82b2df9 ("pci-sysfs: use proper file capability helper function"). Thus, the two interfaces check the same capability against different credentials. Checking the credentials of the task calling read() makes the outcome depend on who reads rather than who opened, so the restriction is bypassed whenever a more privileged process reads through the descriptor. Checking the credentials recorded in file->f_cred settles the decision at open() time and ties it to the file, where it cannot change with the caller. Use file_ns_capable() to check CAP_SYS_ADMIN against the credentials in effect when the file was opened, bringing the procfs interface in line with the sysfs behaviour. As a result, a file descriptor opened by a privileged process and passed to an unprivileged one now allows the entire config space to be read through procfs, matching sysfs. | ||||
| CVE-2026-97580 | 1 Linux | 1 Linux Kernel | 2026-09-26 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: media: rkvdec: bound HEVC tile loops and PPS id to the array capacity compute_tiles_uniform() and compute_tiles_non_uniform() loop over num_tile_columns_minus1 + 1 / num_tile_rows_minus1 + 1 entries, and assemble_hw_pps() writes one COLUMN_WIDTH / ROW_HEIGHT register per tile and indexes priv_tbl->param_set[] by pic_parameter_set_id, all taken from the untrusted PPS. Use the bounded v4l2_hevc_pps_num_tile_columns() / v4l2_hevc_pps_num_tile_rows() helpers for the tile loops, and bail out of assemble_hw_pps() before indexing priv_tbl->param_set[] with an out-of-range pic_parameter_set_id, so the writes stay within the hardware tables. | ||||
| CVE-2026-100557 | 1 Openclaw | 1 Openclaw | 2026-09-26 | 8.3 High |
| OpenClaw versions before 2026.8.1 contain an authorization bypass vulnerability in skill tool dispatch that fails to carry the sender's owner status. Non-owner senders authorized to invoke skill commands can access owner-only tools and server credentials reserved for owners. | ||||
| CVE-2026-100553 | 1 Openclaw | 1 Openclaw | 2026-09-26 | 4.3 Medium |
| OpenClaw versions >= 2026.6.9 and < 2026.8.1 do not declare the native chatId parameter as a delivery target in the Feishu unpin feature, so unpin requests can bypass the shared same-provider cross-context target check. When tools.message.crossContext.allowWithinProvider is disabled, an admitted (authenticated) sender can remove a pin from another Feishu group that the sender and the configured account are otherwise permitted to access, bypassing the intended cross-context message mutation policy. Feishu membership and group authorization still apply, and the demonstrated impact is limited to message mutation (pin removal). The issue is fixed in 2026.8.1. | ||||
| CVE-2026-100549 | 1 Openclaw | 1 Openclaw | 2026-09-26 | 5.4 Medium |
| OpenClaw versions before 2026.8.1 contain a path traversal vulnerability in QQBot voice attachment handling where filenames are decoded twice, allowing encoded traversal segments to reappear after sanitization. Attackers can supply crafted voice attachments that write files outside the intended staging directory to other process-writable locations. | ||||
| CVE-2026-100545 | 1 Openclaw | 1 Openclaw | 2026-09-26 | 5.3 Medium |
| OpenClaw (npm package `openclaw`) before 2026.8.1 incorrectly enforces sender tool policies during session-memory filename generation. In affected versions, filename generation created an embedded helper that retained tools which the originating sender's policy had removed. When session-memory filename generation was enabled for an agent reachable by lower-trust senders, model-mediated instructions could cause the helper to invoke tools outside that sender's effective policy; the demonstrated impact was the creation of persistent scheduled work. Exploitability depends on the model acting on the injected instruction and on which tools the helper exposes. The issue is fixed in 2026.8.1; as a workaround, disable session-memory filename generation for agents reachable by lower-trust senders. | ||||
| CVE-2026-100537 | 1 Openclaw | 1 Openclaw | 2026-09-26 | 3.1 Low |
| OpenClaw (npm package 'openclaw') before 2026.8.1 fails to apply the originating requester's effective tool policy during Active Memory automatic recall. In deployments that use Active Memory together with requester-specific tool rules, deterministic and hidden recall paths can retrieve durable memory and inject it into the agent's context even when toolsBySender explicitly denies that requester access to the memory tools (memory_search, memory_get). As a result, an admitted but denied sender can receive information derived from durable memory in the agent's response without directly invoking any memory tool. The issue is fixed in 2026.8.1. | ||||
| CVE-2026-100533 | 1 Openclaw | 1 Openclaw | 2026-09-26 | 5.3 Medium |
| OpenClaw versions before 2026.8.1 contain a path traversal vulnerability in the tools.fs.workspaceOnly feature where Unicode filename fallback can normalize validated parent directory components. Admitted requesters can exploit canonically equivalent sibling directories to read files outside the configured workspace boundary. | ||||
| CVE-2026-100529 | 1 Openclaw | 1 Openclaw | 2026-09-26 | 6.4 Medium |
| OpenClaw versions before 2026.8.1 contain an authorization scope widening vulnerability in file-transfer allow-always approvals that allows attackers to reuse standing grants for unreviewed paths. Attackers can exploit glob metacharacter interpretation and node display name reuse to access sibling paths or different nodes beyond the operator's original approval scope. | ||||
| CVE-2026-93213 | 1 Linux | 1 Linux Kernel | 2026-09-26 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: of: fix out-of-bounds read in of_alias_scan() stem parser The stem parser tests isdigit(*(end - 1)) before checking end > start and so reads one byte before the property name when the name is empty or all digits. Check the bound first. | ||||
| CVE-2026-93220 | 1 Linux | 1 Linux Kernel | 2026-09-26 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: sched_ext: Keep kick_sync waiting on the rq's own CPU kick_sync_wait_bal_cb() assumes it runs on the rq's CPU from the __schedule() tail: the snapshots it compares against live in that CPU's percpu area and the busy-wait runs with the rq lock dropped and IRQs enabled. However, dispatch can now drop the rq lock while the callback sits queued, and rq lock takers in that window (the sched class change paths, the scx task iterator) flush pending balance callbacks on release, running the callback on a foreign CPU. Such a run compares against unrelated snapshots and can deadlock when the executing CPU is itself a wait target. Bail on a foreign CPU and leave the wait state alone. The wait only observes progress that the resched kicks already guarantee and the rq's next wait picks up the stale cpus_to_sync bits. | ||||
| CVE-2026-97911 | 1 Linux | 1 Linux Kernel | 2026-09-26 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: accel: ethosu: Ensure SRAM region size matches job It is possible for userspace to set the job SRAM size to 0, but then still have SRAM accesses in the command stream. When the job SRAM size is 0, setting the region base register is skipped and a stale base address from a prior job is used. Check the region size against the job's SRAM size instead of just the size of the SRAM. The job's SRAM size was already checked against the total SRAM size. | ||||
| CVE-2026-81549 | 1 Ibm | 1 Datastage On Cloud Pak For Data | 2026-09-26 | 9.6 Critical |
| IBM DataStage on Cloud Pak for Data 5.4.0.0 could allow a remote authenticated attacker to obtain sensitive information due to improper validation of the X-Forwarded-Proto header. | ||||
| CVE-2026-82094 | 1 Ibm | 1 Datastage On Cloud Pak For Data | 2026-09-26 | 7.1 High |
| IBM DataStage on Cloud Pak for Data 5.4.0.0 could allow a remote authenticated attacker to traverse directories on the system due to improper limitation of a pathname to a restricted directory. | ||||
| CVE-2026-93216 | 1 Linux | 1 Linux Kernel | 2026-09-26 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: mm/page_owner: use memcg_data snapshot to avoid TOCTOU in print_page_owner_memcg() print_page_owner_memcg() reads page->memcg_data via READ_ONCE() at the start to guard against tail pages and NULL data. However, it later re-reads page->memcg_data locklessly in two places: 1: page_memcg_check(page) 2: PageMemcgKmem(page) (via folio_memcg_kmem(), which includes VM_BUG_ON assertions for tail pages and MEMCG_DATA_OBJEXTS) If the page is concurrently freed and reallocated as a THP tail page or slab page between these calls, the VM_BUG_ON assertions can trigger on CONFIG_DEBUG_VM=y builds, crashing the kernel. Fix both TOCTOU issues by using the memcg_data snapshot throughout. | ||||
| CVE-2026-93801 | 1 Linux | 1 Linux Kernel | 2026-09-26 | 7 High |
| In the Linux kernel, the following vulnerability has been resolved: smb/client: zero-initialize stack-allocated cifs_open_info_data Stack-allocated cifs_open_info_data may contain random data. This can make some fields have wrong value if they are not set later. | ||||
| CVE-2026-98056 | 1 Linux | 1 Linux Kernel | 2026-09-26 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: nvme: remove stale namespaces by NSID range during scan nvme_scan_ns_list() drops the stale namespaces in each gap in the reported NSID list one NSID at a time. Every iteration calls nvme_find_get_ns() to look the namespace up and removes it if it is present. The loop runs once per NSID in the gap rather than once per namespace actually present. NSIDs are 32-bit, so a target with a sparse NSID space can make a single gap spin the loop billions of times with nothing to remove. watchdog: BUG: soft lockup - CPU#4 stuck for 26s! Workqueue: nvme-wq nvme_scan_work [nvme_core] RIP: 0010:__srcu_read_unlock+0xb/0x20 Call Trace: nvme_find_get_ns+0x7d/0xb0 [nvme_core] nvme_scan_ns_list+0xe8/0x280 [nvme_core] nvme_scan_work+0x18a/0x280 [nvme_core] process_one_work+0x197/0x380 worker_thread+0x2fe/0x410 kthread+0xe0/0x100 Rename nvme_remove_invalid_namespaces() to nvme_remove_nsid_range() and give it an open (start, end) NSID range. ctrl->namespaces is sorted by NSID, so the whole gap is dropped in a single walk that stops once end is reached. This bounds the work by the namespaces that are present instead of by the size of the gap. | ||||
| CVE-2026-93827 | 1 Linux | 1 Linux Kernel | 2026-09-26 | 8.4 High |
| In the Linux kernel, the following vulnerability has been resolved: virtio-fs: avoid double-free on failed queue setup virtio_fs_setup_vqs() allocates fs->vqs and fs->mq_map before calling virtio_find_vqs(). If virtio_find_vqs() fails, the error path frees both pointers and returns an error to virtio_fs_probe(). virtio_fs_probe() then drops the last kobject reference, and virtio_fs_ktype_release() frees fs->vqs and fs->mq_map again. This leaves dangling pointers in struct virtio_fs and can trigger a double-free during probe failure cleanup. Set fs->vqs and fs->mq_map to NULL immediately after kfree() in the virtio_fs_setup_vqs() error path so that the later kobject release sees an uninitialized state and kfree(NULL) becomes harmless. This can be reproduced when a broken virtio-fs device advertises more request queues than the transport actually provides. In that case virtio_find_vqs() fails while setting up the extra queue, and the probe path reaches the double-free cleanup sequence. | ||||
| CVE-2026-97428 | 1 Linux | 1 Linux Kernel | 2026-09-26 | 7.7 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: harden FRU PIA parsing with bounded helpers Replace the open-coded TLV walk with fru_pia_advance() and fru_pia_copy_field() helpers that bound every read by the actual EEPROM data length, preventing out-of-bounds reads on truncated or malformed FRU data. | ||||
| CVE-2026-96272 | 1 Clip-bucket | 1 Clipbucket | 2026-09-26 | 7.5 High |
| ClipBucket v5 before 5.5.3-#182 contains a blind SQL injection vulnerability in the photo search endpoint where the query parameter is passed unsanitized into SQL WHERE and ORDER BY clauses. Unauthenticated attackers can exploit time-based blind SQL injection techniques to extract user credentials, email addresses, and administrator password hashes for account takeover. | ||||