Export limit exceeded: 348975 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (348975 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2025-38584 | 1 Linux | 1 Linux Kernel | 2026-05-07 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: padata: Fix pd UAF once and for all There is a race condition/UAF in padata_reorder that goes back to the initial commit. A reference count is taken at the start of the process in padata_do_parallel, and released at the end in padata_serial_worker. This reference count is (and only is) required for padata_replace to function correctly. If padata_replace is never called then there is no issue. In the function padata_reorder which serves as the core of padata, as soon as padata is added to queue->serial.list, and the associated spin lock released, that padata may be processed and the reference count on pd would go away. Fix this by getting the next padata before the squeue->serial lock is released. In order to make this possible, simplify padata_reorder by only calling it once the next padata arrives. | ||||
| CVE-2026-43156 | 1 Linux | 1 Linux Kernel | 2026-05-07 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: net: usb: pegasus: enable basic endpoint checking pegasus_probe() fills URBs with hardcoded endpoint pipes without verifying the endpoint descriptors: - usb_rcvbulkpipe(dev, 1) for RX data - usb_sndbulkpipe(dev, 2) for TX data - usb_rcvintpipe(dev, 3) for status interrupts A malformed USB device can present these endpoints with transfer types that differ from what the driver assumes. Add a pegasus_usb_ep enum for endpoint numbers, replacing magic constants throughout. Add usb_check_bulk_endpoints() and usb_check_int_endpoints() calls before any resource allocation to verify endpoint types before use, rejecting devices with mismatched descriptors at probe time, and avoid triggering assertion. Similar fix to - commit 90b7f2961798 ("net: usb: rtl8150: enable basic endpoint checking") - commit 9e7021d2aeae ("net: usb: catc: enable basic endpoint checking") | ||||
| CVE-2026-43157 | 1 Linux | 1 Linux Kernel | 2026-05-07 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: octeontx2-af: CGX: fix bitmap leaks The RX/TX flow-control bitmaps (rx_fc_pfvf_bmap and tx_fc_pfvf_bmap) are allocated by cgx_lmac_init() but never freed in cgx_lmac_exit(). Unbinding and rebinding the driver therefore triggers kmemleak: unreferenced object (size 16): backtrace: rvu_alloc_bitmap cgx_probe Free both bitmaps during teardown. | ||||
| CVE-2026-43209 | 1 Linux | 1 Linux Kernel | 2026-05-07 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: minix: Add required sanity checking to minix_check_superblock() The fs/minix implementation of the minix filesystem does not currently support any other value for s_log_zone_size than 0. This is also the only value supported in util-linux; see mkfs.minix.c line 511. In addition, this patch adds some sanity checking for the other minix superblock fields, and moves the minix_blocks_needed() checks for the zmap and imap also to minix_check_super_block(). This also closes a related syzbot bug report. | ||||
| CVE-2026-43217 | 1 Linux | 1 Linux Kernel | 2026-05-07 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: media: iris: gen2: Add sanity check for session stop In iris_kill_session, inst->state is set to IRIS_INST_ERROR and session_close is executed, which will kfree(inst_hfi_gen2->packet). If stop_streaming is called afterward, it will cause a crash. Add a NULL check for inst_hfi_gen2->packet before sendling STOP packet to firmware to fix that. | ||||
| CVE-2026-7909 | 4 Apple, Google, Linux and 1 more | 4 Macos, Chrome, Linux Kernel and 1 more | 2026-05-07 | 3.1 Low |
| Inappropriate implementation in ServiceWorker in Google Chrome prior to 148.0.7778.96 allowed a remote attacker who had compromised the renderer process to bypass site isolation via a crafted HTML page. (Chromium security severity: High) | ||||
| CVE-2026-7950 | 4 Apple, Google, Linux and 1 more | 4 Macos, Chrome, Linux Kernel and 1 more | 2026-05-07 | 5.4 Medium |
| Out of bounds read and write in GFX in Google Chrome prior to 148.0.7778.96 allowed a remote attacker to perform arbitrary read/write via malicious network traffic. (Chromium security severity: Medium) | ||||
| CVE-2026-7959 | 4 Apple, Google, Linux and 1 more | 4 Macos, Chrome, Linux Kernel and 1 more | 2026-05-07 | 3.1 Low |
| Inappropriate implementation in Navigation in Google Chrome prior to 148.0.7778.96 allowed a remote attacker who had compromised the renderer process to bypass site isolation via a crafted HTML page. (Chromium security severity: Medium) | ||||
| CVE-2026-43119 | 1 Linux | 1 Linux Kernel | 2026-05-07 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_sync: annotate data-races around hdev->req_status __hci_cmd_sync_sk() sets hdev->req_status under hdev->req_lock: hdev->req_status = HCI_REQ_PEND; However, several other functions read or write hdev->req_status without holding any lock: - hci_send_cmd_sync() reads req_status in hci_cmd_work (workqueue) - hci_cmd_sync_complete() reads/writes from HCI event completion - hci_cmd_sync_cancel() / hci_cmd_sync_cancel_sync() read/write - hci_abort_conn() reads in connection abort path Since __hci_cmd_sync_sk() runs on hdev->req_workqueue while hci_send_cmd_sync() runs on hdev->workqueue, these are different workqueues that can execute concurrently on different CPUs. The plain C accesses constitute a data race. Add READ_ONCE()/WRITE_ONCE() annotations on all concurrent accesses to hdev->req_status to prevent potential compiler optimizations that could affect correctness (e.g., load fusing in the wait_event condition or store reordering). | ||||
| CVE-2025-71271 | 1 Linux | 1 Linux Kernel | 2026-05-07 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: hfsplus: ensure sb->s_fs_info is always cleaned up When hfsplus was converted to the new mount api a bug was introduced by changing the allocation pattern of sb->s_fs_info. If setup_bdev_super() fails after a new superblock has been allocated by sget_fc(), but before hfsplus_fill_super() takes ownership of the filesystem-specific s_fs_info data it was leaked. Fix this by freeing sb->s_fs_info in hfsplus_kill_super(). | ||||
| CVE-2026-43121 | 1 Linux | 1 Linux Kernel | 2026-05-07 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: io_uring/zcrx: fix user_ref race between scrub and refill paths The io_zcrx_put_niov_uref() function uses a non-atomic check-then-decrement pattern (atomic_read followed by separate atomic_dec) to manipulate user_refs. This is serialized against other callers by rq_lock, but io_zcrx_scrub() modifies the same counter with atomic_xchg() WITHOUT holding rq_lock. On SMP systems, the following race exists: CPU0 (refill, holds rq_lock) CPU1 (scrub, no rq_lock) put_niov_uref: atomic_read(uref) - 1 // window opens atomic_xchg(uref, 0) - 1 return_niov_freelist(niov) [PUSH #1] // window closes atomic_dec(uref) - wraps to -1 returns true return_niov(niov) return_niov_freelist(niov) [PUSH #2: DOUBLE-FREE] The same niov is pushed to the freelist twice, causing free_count to exceed nr_iovs. Subsequent freelist pushes then perform an out-of-bounds write (a u32 value) past the kvmalloc'd freelist array into the adjacent slab object. Fix this by replacing the non-atomic read-then-dec in io_zcrx_put_niov_uref() with an atomic_try_cmpxchg loop that atomically tests and decrements user_refs. This makes the operation safe against concurrent atomic_xchg from scrub without requiring scrub to acquire rq_lock. [pavel: removed a warning and a comment] | ||||
| CVE-2026-43223 | 1 Linux | 1 Linux Kernel | 2026-05-07 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: media: pvrusb2: fix URB leak in pvr2_send_request_ex When pvr2_send_request_ex() submits a write URB successfully but fails to submit the read URB (e.g. returns -ENOMEM), it returns immediately without waiting for the write URB to complete. Since the driver reuses the same URB structure, a subsequent call to pvr2_send_request_ex() attempts to submit the still-active write URB, triggering a 'URB submitted while active' warning in usb_submit_urb(). Fix this by ensuring the write URB is unlinked and waited upon if the read URB submission fails. | ||||
| CVE-2026-43227 | 1 Linux | 1 Linux Kernel | 2026-05-07 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: clocksource/drivers/sh_tmu: Always leave device running after probe The TMU device can be used as both a clocksource and a clockevent provider. The driver tries to be smart and power itself on and off, as well as enabling and disabling its clock when it's not in operation. This behavior is slightly altered if the TMU is used as an early platform device in which case the device is left powered on after probe, but the clock is still enabled and disabled at runtime. This has worked for a long time, but recent improvements in PREEMPT_RT and PROVE_LOCKING have highlighted an issue. As the TMU registers itself as a clockevent provider, clockevents_register_device(), it needs to use raw spinlocks internally as this is the context of which the clockevent framework interacts with the TMU driver. However in the context of holding a raw spinlock the TMU driver can't really manage its power state or clock with calls to pm_runtime_*() and clk_*() as these calls end up in other platform drivers using regular spinlocks to control power and clocks. This mix of spinlock contexts trips a lockdep warning. ============================= [ BUG: Invalid wait context ] 6.18.0-arm64-renesas-09926-gee959e7c5e34 #1 Not tainted ----------------------------- swapper/0/0 is trying to lock: ffff000008c9e180 (&dev->power.lock){-...}-{3:3}, at: __pm_runtime_resume+0x38/0x88 other info that might help us debug this: context-{5:5} 1 lock held by swapper/0/0: ccree e6601000.crypto: ARM CryptoCell 630P Driver: HW version 0xAF400001/0xDCC63000, Driver version 5.0 #0: ffff8000817ec298 ccree e6601000.crypto: ARM ccree device initialized (tick_broadcast_lock){-...}-{2:2}, at: __tick_broadcast_oneshot_control+0xa4/0x3a8 stack backtrace: CPU: 0 UID: 0 PID: 0 Comm: swapper/0 Not tainted 6.18.0-arm64-renesas-09926-gee959e7c5e34 #1 PREEMPT Hardware name: Renesas Salvator-X 2nd version board based on r8a77965 (DT) Call trace: show_stack+0x14/0x1c (C) dump_stack_lvl+0x6c/0x90 dump_stack+0x14/0x1c __lock_acquire+0x904/0x1584 lock_acquire+0x220/0x34c _raw_spin_lock_irqsave+0x58/0x80 __pm_runtime_resume+0x38/0x88 sh_tmu_clock_event_set_oneshot+0x84/0xd4 clockevents_switch_state+0xfc/0x13c tick_broadcast_set_event+0x30/0xa4 __tick_broadcast_oneshot_control+0x1e0/0x3a8 tick_broadcast_oneshot_control+0x30/0x40 cpuidle_enter_state+0x40c/0x680 cpuidle_enter+0x30/0x40 do_idle+0x1f4/0x280 cpu_startup_entry+0x34/0x40 kernel_init+0x0/0x130 do_one_initcall+0x0/0x230 __primary_switched+0x88/0x90 For non-PREEMPT_RT builds this is not really an issue, but for PREEMPT_RT builds where normal spinlocks can sleep this might be an issue. Be cautious and always leave the power and clock running after probe. | ||||
| CVE-2026-43082 | 1 Linux | 1 Linux Kernel | 2026-05-07 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net: txgbe: leave space for null terminators on property_entry Lists of struct property_entry are supposed to be terminated with an empty property, this driver currently seems to be allocating exactly the amount of entry used. Change the struct definition to leave an extra element for all property_entry. | ||||
| CVE-2026-43089 | 1 Linux | 1 Linux Kernel | 2026-05-07 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: xfrm_user: fix info leak in build_mapping() struct xfrm_usersa_id has a one-byte padding hole after the proto field, which ends up never getting set to zero before copying out to userspace. Fix that up by zeroing out the whole structure before setting individual variables. | ||||
| CVE-2026-43096 | 1 Linux | 1 Linux Kernel | 2026-05-07 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: mshv: Fix infinite fault loop on permission-denied GPA intercepts Prevent infinite fault loops when guests access memory regions without proper permissions. Currently, mshv_handle_gpa_intercept() attempts to remap pages for all faults on movable memory regions, regardless of whether the access type is permitted. When a guest writes to a read-only region, the remap succeeds but the region remains read-only, causing immediate re-fault and spinning the vCPU indefinitely. Validate intercept access type against region permissions before attempting remaps. Reject writes to non-writable regions and executes to non-executable regions early, returning false to let the VMM handle the intercept appropriately. This also closes a potential DoS vector where malicious guests could intentionally trigger these fault loops to consume host resources. | ||||
| CVE-2026-43103 | 1 Linux | 1 Linux Kernel | 2026-05-07 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net: lapbether: handle NETDEV_PRE_TYPE_CHANGE lapbeth_data_transmit() expects the underlying device type to be ARPHRD_ETHER. Returning NOTIFY_BAD from lapbeth_device_event() makes sure bonding driver can not break this expectation. | ||||
| CVE-2026-43137 | 1 Linux | 1 Linux Kernel | 2026-05-07 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ASoC: SOF: Intel: hda: Fix NULL pointer dereference If there's a mismatch between the DAI links in the machine driver and the topology, it is possible that the playback/capture widget is not set, especially in the case of loopback capture for echo reference where we use the dummy DAI link. Return the error when the widget is not set to avoid a null pointer dereference like below when the topology is broken. RIP: 0010:hda_dai_get_ops.isra.0+0x14/0xa0 [snd_sof_intel_hda_common] | ||||
| CVE-2026-43149 | 1 Linux | 1 Linux Kernel | 2026-05-07 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net: wan/fsl_ucc_hdlc: Fix dma_free_coherent() in uhdlc_memclean() The priv->rx_buffer and priv->tx_buffer are alloc'd together as contiguous buffers in uhdlc_init() but freed as two buffers in uhdlc_memclean(). Change the cleanup to only call dma_free_coherent() once on the whole buffer. | ||||
| CVE-2026-43234 | 1 Linux | 1 Linux Kernel | 2026-05-07 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: team: avoid NETDEV_CHANGEMTU event when unregistering slave syzbot is reporting unregister_netdevice: waiting for netdevsim0 to become free. Usage count = 3 ref_tracker: netdev@ffff88807dcf8618 has 1/2 users at __netdev_tracker_alloc include/linux/netdevice.h:4400 [inline] netdev_hold include/linux/netdevice.h:4429 [inline] inetdev_init+0x201/0x4e0 net/ipv4/devinet.c:286 inetdev_event+0x251/0x1610 net/ipv4/devinet.c:1600 notifier_call_chain+0x19d/0x3a0 kernel/notifier.c:85 call_netdevice_notifiers_mtu net/core/dev.c:2318 [inline] netif_set_mtu_ext+0x5aa/0x800 net/core/dev.c:9886 netif_set_mtu+0xd7/0x1b0 net/core/dev.c:9907 dev_set_mtu+0x126/0x260 net/core/dev_api.c:248 team_port_del+0xb07/0xcb0 drivers/net/team/team_core.c:1333 team_del_slave drivers/net/team/team_core.c:1936 [inline] team_device_event+0x207/0x5b0 drivers/net/team/team_core.c:2929 notifier_call_chain+0x19d/0x3a0 kernel/notifier.c:85 call_netdevice_notifiers_extack net/core/dev.c:2281 [inline] call_netdevice_notifiers net/core/dev.c:2295 [inline] __dev_change_net_namespace+0xcb7/0x2050 net/core/dev.c:12592 do_setlink+0x2ce/0x4590 net/core/rtnetlink.c:3060 rtnl_changelink net/core/rtnetlink.c:3776 [inline] __rtnl_newlink net/core/rtnetlink.c:3935 [inline] rtnl_newlink+0x15a9/0x1be0 net/core/rtnetlink.c:4072 rtnetlink_rcv_msg+0x7d5/0xbe0 net/core/rtnetlink.c:6958 netlink_rcv_skb+0x232/0x4b0 net/netlink/af_netlink.c:2550 netlink_unicast_kernel net/netlink/af_netlink.c:1318 [inline] netlink_unicast+0x80f/0x9b0 net/netlink/af_netlink.c:1344 netlink_sendmsg+0x813/0xb40 net/netlink/af_netlink.c:1894 problem. Ido Schimmel found steps to reproduce ip link add name team1 type team ip link add name dummy1 mtu 1499 master team1 type dummy ip netns add ns1 ip link set dev dummy1 netns ns1 ip -n ns1 link del dev dummy1 and also found that the same issue was fixed in the bond driver in commit f51048c3e07b ("bonding: avoid NETDEV_CHANGEMTU event when unregistering slave"). Let's do similar thing for the team driver, with commit ad7c7b2172c3 ("net: hold netdev instance lock during sysfs operations") and commit 303a8487a657 ("net: s/__dev_set_mtu/__netif_set_mtu/") also applied. | ||||