Export limit exceeded: 20037 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (20037 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2025-40183 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Fix metadata_dst leak __bpf_redirect_neigh_v{4,6} Cilium has a BPF egress gateway feature which forces outgoing K8s Pod traffic to pass through dedicated egress gateways which then SNAT the traffic in order to interact with stable IPs outside the cluster. The traffic is directed to the gateway via vxlan tunnel in collect md mode. A recent BPF change utilized the bpf_redirect_neigh() helper to forward packets after the arrival and decap on vxlan, which turned out over time that the kmalloc-256 slab usage in kernel was ever-increasing. The issue was that vxlan allocates the metadata_dst object and attaches it through a fake dst entry to the skb. The latter was never released though given bpf_redirect_neigh() was merely setting the new dst entry via skb_dst_set() without dropping an existing one first. | ||||
| CVE-2025-40182 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: crypto: skcipher - Fix reqsize handling Commit afddce13ce81d ("crypto: api - Add reqsize to crypto_alg") introduced cra_reqsize field in crypto_alg struct to replace type specific reqsize fields. It looks like this was introduced specifically for ahash and acomp from the commit description as subsequent commits add necessary changes in these alg frameworks. However, this is being recommended for use in all crypto algs [1] instead of setting reqsize using crypto_*_set_reqsize(). Using cra_reqsize in skcipher algorithms, hence, causes memory corruptions and crashes as the underlying functions in the algorithm framework have not been updated to set the reqsize properly from cra_reqsize. [2] Add proper set_reqsize calls in the skcipher init function to properly initialize reqsize for these algorithms in the framework. [1]: https://lore.kernel.org/linux-crypto/aCL8BxpHr5OpT04k@gondor.apana.org.au/ [2]: https://gist.github.com/Pratham-T/24247446f1faf4b7843e4014d5089f6b | ||||
| CVE-2025-40179 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: ext4: verify orphan file size is not too big In principle orphan file can be arbitrarily large. However orphan replay needs to traverse it all and we also pin all its buffers in memory. Thus filesystems with absurdly large orphan files can lead to big amounts of memory consumed. Limit orphan file size to a sane value and also use kvmalloc() for allocating array of block descriptor structures to avoid large order allocations for sane but large orphan files. | ||||
| CVE-2025-40176 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: tls: wait for pending async decryptions if tls_strp_msg_hold fails Async decryption calls tls_strp_msg_hold to create a clone of the input skb to hold references to the memory it uses. If we fail to allocate that clone, proceeding with async decryption can lead to various issues (UAF on the skb, writing into userspace memory after the recv() call has returned). In this case, wait for all pending decryption requests. | ||||
| CVE-2025-40173 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: net/ip6_tunnel: Prevent perpetual tunnel growth Similarly to ipv4 tunnel, ipv6 version updates dev->needed_headroom, too. While ipv4 tunnel headroom adjustment growth was limited in commit 5ae1e9922bbd ("net: ip_tunnel: prevent perpetual headroom growth"), ipv6 tunnel yet increases the headroom without any ceiling. Reflect ipv4 tunnel headroom adjustment limit on ipv6 version. Credits to Francesco Ruggeri, who was originally debugging this issue and wrote local Arista-specific patch and a reproducer. | ||||
| CVE-2025-40170 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: net: use dst_dev_rcu() in sk_setup_caps() Use RCU to protect accesses to dst->dev from sk_setup_caps() and sk_dst_gso_max_size(). Also use dst_dev_rcu() in ip6_dst_mtu_maybe_forward(), and ip_dst_mtu_maybe_forward(). ip4_dst_hoplimit() can use dst_dev_net_rcu(). | ||||
| CVE-2025-40080 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: nbd: restrict sockets to TCP and UDP Recently, syzbot started to abuse NBD with all kinds of sockets. Commit cf1b2326b734 ("nbd: verify socket is supported during setup") made sure the socket supported a shutdown() method. Explicitely accept TCP and UNIX stream sockets. | ||||
| CVE-2025-40169 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Reject negative offsets for ALU ops When verifying BPF programs, the check_alu_op() function validates instructions with ALU operations. The 'offset' field in these instructions is a signed 16-bit integer. The existing check 'insn->off > 1' was intended to ensure the offset is either 0, or 1 for BPF_MOD/BPF_DIV. However, because 'insn->off' is signed, this check incorrectly accepts all negative values (e.g., -1). This commit tightens the validation by changing the condition to '(insn->off != 0 && insn->off != 1)'. This ensures that any value other than the explicitly permitted 0 and 1 is rejected, hardening the verifier against malformed BPF programs. | ||||
| CVE-2025-40076 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: PCI: rcar-host: Pass proper IRQ domain to generic_handle_domain_irq() Starting with commit dd26c1a23fd5 ("PCI: rcar-host: Switch to msi_create_parent_irq_domain()"), the MSI parent IRQ domain is NULL because the object of type struct irq_domain_info passed to: msi_create_parent_irq_domain() -> irq_domain_instantiate()() -> __irq_domain_instantiate() has no reference to the parent IRQ domain. Using msi->domain->parent as an argument for generic_handle_domain_irq() leads to below error: "Unable to handle kernel NULL pointer dereference at virtual address" This error was identified while switching the upcoming RZ/G3S PCIe host controller driver to msi_create_parent_irq_domain() (which was using a similar pattern to handle MSIs (see link section)), but it was not tested on hardware using the pcie-rcar-host controller driver due to lack of hardware. [mani: reworded subject and description] | ||||
| CVE-2025-40249 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: gpio: cdev: make sure the cdev fd is still active before emitting events With the final call to fput() on a file descriptor, the release action may be deferred and scheduled on a work queue. The reference count of that descriptor is still zero and it must not be used. It's possible that a GPIO change, we want to notify the user-space about, happens AFTER the reference count on the file descriptor associated with the character device went down to zero but BEFORE the .release() callback was called from the workqueue and so BEFORE we unregistered from the notifier. Using the regular get_file() routine in this situation triggers the following warning: struct file::f_count incremented from zero; use-after-free condition present! So use the get_file_active() variant that will return NULL on file descriptors that have been or are being released. | ||||
| CVE-2025-40215 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: xfrm: delete x->tunnel as we delete x The ipcomp fallback tunnels currently get deleted (from the various lists and hashtables) as the last user state that needed that fallback is destroyed (not deleted). If a reference to that user state still exists, the fallback state will remain on the hashtables/lists, triggering the WARN in xfrm_state_fini. Because of those remaining references, the fix in commit f75a2804da39 ("xfrm: destroy xfrm_state synchronously on net exit path") is not complete. We recently fixed one such situation in TCP due to defered freeing of skbs (commit 9b6412e6979f ("tcp: drop secpath at the same time as we currently drop dst")). This can also happen due to IP reassembly: skbs with a secpath remain on the reassembly queue until netns destruction. If we can't guarantee that the queues are flushed by the time xfrm_state_fini runs, there may still be references to a (user) xfrm_state, preventing the timely deletion of the corresponding fallback state. Instead of chasing each instance of skbs holding a secpath one by one, this patch fixes the issue directly within xfrm, by deleting the fallback state as soon as the last user state depending on it has been deleted. Destruction will still happen when the final reference is dropped. A separate lockdep class for the fallback state is required since we're going to lock x->tunnel while x is locked. | ||||
| CVE-2025-40218 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: mm/damon/vaddr: do not repeat pte_offset_map_lock() until success DAMON's virtual address space operation set implementation (vaddr) calls pte_offset_map_lock() inside the page table walk callback function. This is for reading and writing page table accessed bits. If pte_offset_map_lock() fails, it retries by returning the page table walk callback function with ACTION_AGAIN. pte_offset_map_lock() can continuously fail if the target is a pmd migration entry, though. Hence it could cause an infinite page table walk if the migration cannot be done until the page table walk is finished. This indeed caused a soft lockup when CPU hotplugging and DAMON were running in parallel. Avoid the infinite loop by simply not retrying the page table walk. DAMON is promising only a best-effort accuracy, so missing access to such pages is no problem. | ||||
| CVE-2025-40075 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: tcp_metrics: use dst_dev_net_rcu() Replace three dst_dev() with a lockdep enabled helper. | ||||
| CVE-2025-40167 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: ext4: detect invalid INLINE_DATA + EXTENTS flag combination syzbot reported a BUG_ON in ext4_es_cache_extent() when opening a verity file on a corrupted ext4 filesystem mounted without a journal. The issue is that the filesystem has an inode with both the INLINE_DATA and EXTENTS flags set: EXT4-fs error (device loop0): ext4_cache_extents:545: inode #15: comm syz.0.17: corrupted extent tree: lblk 0 < prev 66 Investigation revealed that the inode has both flags set: DEBUG: inode 15 - flag=1, i_inline_off=164, has_inline=1, extents_flag=1 This is an invalid combination since an inode should have either: - INLINE_DATA: data stored directly in the inode - EXTENTS: data stored in extent-mapped blocks Having both flags causes ext4_has_inline_data() to return true, skipping extent tree validation in __ext4_iget(). The unvalidated out-of-order extents then trigger a BUG_ON in ext4_es_cache_extent() due to integer underflow when calculating hole sizes. Fix this by detecting this invalid flag combination early in ext4_iget() and rejecting the corrupted inode. | ||||
| CVE-2025-40069 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/msm: Fix obj leak in VM_BIND error path If we fail a handle-lookup part way thru, we need to drop the already obtained obj references. Patchwork: https://patchwork.freedesktop.org/patch/669784/ | ||||
| CVE-2025-40068 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: fs: ntfs3: Fix integer overflow in run_unpack() The MFT record relative to the file being opened contains its runlist, an array containing information about the file's location on the physical disk. Analysis of all Call Stack paths showed that the values of the runlist array, from which LCNs are calculated, are not validated before run_unpack function. The run_unpack function decodes the compressed runlist data format from MFT attributes (for example, $DATA), converting them into a runs_tree structure, which describes the mapping of virtual clusters (VCN) to logical clusters (LCN). The NTFS3 subsystem also has a shortcut for deleting files from MFT records - in this case, the RUN_DEALLOCATE command is sent to the run_unpack input, and the function logic provides that all data transferred to the runlist about file or directory is deleted without creating a runs_tree structure. Substituting the runlist in the $DATA attribute of the MFT record for an arbitrary file can lead either to access to arbitrary data on the disk bypassing access checks to them (since the inode access check occurs above) or to destruction of arbitrary data on the disk. Add overflow check for addition operation. Found by Linux Verification Center (linuxtesting.org) with SVACE. | ||||
| CVE-2025-40067 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: fs/ntfs3: reject index allocation if $BITMAP is empty but blocks exist Index allocation requires at least one bit in the $BITMAP attribute to track usage of index entries. If the bitmap is empty while index blocks are already present, this reflects on-disk corruption. syzbot triggered this condition using a malformed NTFS image. During a rename() operation involving a long filename (which spans multiple index entries), the empty bitmap allowed the name to be added without valid tracking. Subsequent deletion of the original entry failed with -ENOENT, due to unexpected index state. Reject such cases by verifying that the bitmap is not empty when index blocks exist. | ||||
| CVE-2025-40165 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: media: nxp: imx8-isi: m2m: Fix streaming cleanup on release If streamon/streamoff calls are imbalanced, such as when exiting an application with Ctrl+C when streaming, the m2m usage_count will never reach zero and the ISI channel won't be freed. Besides from that, if the input line width is more than 2K, it will trigger a WARN_ON(): [ 59.222120] ------------[ cut here ]------------ [ 59.226758] WARNING: drivers/media/platform/nxp/imx8-isi/imx8-isi-hw.c:631 at mxc_isi_channel_chain+0xa4/0x120, CPU#4: v4l2-ctl/654 [ 59.238569] Modules linked in: ap1302 [ 59.242231] CPU: 4 UID: 0 PID: 654 Comm: v4l2-ctl Not tainted 6.16.0-rc4-next-20250704-06511-gff0e002d480a-dirty #258 PREEMPT [ 59.253597] Hardware name: NXP i.MX95 15X15 board (DT) [ 59.258720] pstate: 80400009 (Nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 59.265669] pc : mxc_isi_channel_chain+0xa4/0x120 [ 59.270358] lr : mxc_isi_channel_chain+0x44/0x120 [ 59.275047] sp : ffff8000848c3b40 [ 59.278348] x29: ffff8000848c3b40 x28: ffff0000859b4c98 x27: ffff800081939f00 [ 59.285472] x26: 000000000000000a x25: ffff0000859b4cb8 x24: 0000000000000001 [ 59.292597] x23: ffff0000816f4760 x22: ffff0000816f4258 x21: ffff000084ceb780 [ 59.299720] x20: ffff000084342ff8 x19: ffff000084340000 x18: 0000000000000000 [ 59.306845] x17: 0000000000000000 x16: 0000000000000000 x15: 0000ffffdb369e1c [ 59.313969] x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000000 [ 59.321093] x11: 0000000000000000 x10: 0000000000000000 x9 : 0000000000000000 [ 59.328217] x8 : ffff8000848c3d48 x7 : ffff800081930b30 x6 : ffff800081930b30 [ 59.335340] x5 : ffff0000859b6000 x4 : ffff80008193ae80 x3 : ffff800081022420 [ 59.342464] x2 : ffff0000852f6900 x1 : 0000000000000001 x0 : ffff000084341000 [ 59.349590] Call trace: [ 59.352025] mxc_isi_channel_chain+0xa4/0x120 (P) [ 59.356722] mxc_isi_m2m_streamon+0x160/0x20c [ 59.361072] v4l_streamon+0x24/0x30 [ 59.364556] __video_do_ioctl+0x40c/0x4a0 [ 59.368560] video_usercopy+0x2bc/0x690 [ 59.372382] video_ioctl2+0x18/0x24 [ 59.375857] v4l2_ioctl+0x40/0x60 [ 59.379168] __arm64_sys_ioctl+0xac/0x104 [ 59.383172] invoke_syscall+0x48/0x104 [ 59.386916] el0_svc_common.constprop.0+0xc0/0xe0 [ 59.391613] do_el0_svc+0x1c/0x28 [ 59.394915] el0_svc+0x34/0xf4 [ 59.397966] el0t_64_sync_handler+0xa0/0xe4 [ 59.402143] el0t_64_sync+0x198/0x19c [ 59.405801] ---[ end trace 0000000000000000 ]--- Address this issue by moving the streaming preparation and cleanup to the vb2 .prepare_streaming() and .unprepare_streaming() operations. This also simplifies the driver by allowing direct usage of the v4l2_m2m_ioctl_streamon() and v4l2_m2m_ioctl_streamoff() helpers. | ||||
| CVE-2025-40063 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: crypto: comp - Use same definition of context alloc and free ops In commit 42d9f6c77479 ("crypto: acomp - Move scomp stream allocation code into acomp"), the crypto_acomp_streams struct was made to rely on having the alloc_ctx and free_ctx operations defined in the same order as the scomp_alg struct. But in that same commit, the alloc_ctx and free_ctx members of scomp_alg may be randomized by structure layout randomization, since they are contained in a pure ops structure (containing only function pointers). If the pointers within scomp_alg are randomized, but those in crypto_acomp_streams are not, then the order may no longer match. This fixes the problem by removing the union from scomp_alg so that both crypto_acomp_streams and scomp_alg will share the same definition of alloc_ctx and free_ctx, ensuring they will always have the same layout. | ||||
| CVE-2025-40161 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mailbox: zynqmp-ipi: Fix SGI cleanup on unbind The driver incorrectly determines SGI vs SPI interrupts by checking IRQ number < 16, which fails with dynamic IRQ allocation. During unbind, this causes improper SGI cleanup leading to kernel crash. Add explicit irq_type field to pdata for reliable identification of SGI interrupts (type-2) and only clean up SGI resources when appropriate. | ||||