Export limit exceeded: 349293 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (349293 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-42072 | 2026-05-08 | 9.8 Critical | ||
| Nornicdb is a distributed low-latency, Graph+Vector, Temporal MVCC with all sub-ms HNSW search, graph traversal, and writes. Prior to version 1.0.42-hotfix, the --address CLI flag (and NORNICDB_ADDRESS / server.host config key) is plumbed through to the HTTP server correctly but never reaches the Bolt server config. The Bolt listener therefore always binds to the wildcard address (all interfaces), regardless of what the user configures. On a LAN, this exposes the graph database — with its default admin:password credentials — to any device sharing the network. This issue has been patched in version 1.0.42-hotfix. | ||||
| CVE-2026-35579 | 1 Coredns.io | 1 Coredns | 2026-05-08 | 9.8 Critical |
| CoreDNS is a DNS server written in Go. In versions prior to 1.14.3, the gRPC, QUIC, DoH, and DoH3 transport implementations incorrectly handle TSIG authentication. For gRPC and QUIC, the server checks whether the TSIG key name exists in the configuration but never calls dns.TsigVerify() to validate the HMAC. If the key name matches a configured key, the tsigStatus field remains nil and the tsig plugin treats the request as successfully authenticated regardless of the MAC value. For DoH and DoH3, the issue is more severe: the DoHWriter.TsigStatus() method unconditionally returns nil, and the server never inspects the TSIG record at all. Any request containing a TSIG record is treated as authenticated over DoH and DoH3, even if the key name is invalid and the MAC is arbitrary. An unauthenticated network attacker can exploit this to bypass TSIG-protected functionality such as AXFR/IXFR zone transfers, dynamic DNS updates, or other TSIG-gated plugin behavior. The DoH and DoH3 variants have a lower exploitation bar because the attacker does not need to know a valid TSIG key name. This issue has been fixed in version 1.14.3. As a workaround, disable gRPC, QUIC, DoH, and DoH3 listeners where TSIG authentication is required, or restrict network-level access to affected transport ports to trusted sources only. | ||||
| CVE-2026-4935 | 2026-05-08 | 8.6 High | ||
| The OttoKit: All-in-One Automation Platform WordPress plugin before 1.1.23 does not properly sanitize user input before using it in a SQL statement, which could allow unauthenticated attackers to perform SQL injection attacks. | ||||
| CVE-2026-40214 | 2026-05-08 | 6.3 Medium | ||
| In OpenStack Cyborg before 16.0.1, the Accelerator Request (ARQ) API does not enforce project ownership at any layer. The project_id column in the database is never populated (NULL for every ARQ), database queries have no project filtering, and policy checks are self-referential (the authorize_wsgi decorator compares the caller's project_id with itself rather than the target resource). Any authenticated non-admin user can complete various actions such as deleting ARQs bound to other projects' instances, aka cross-tenant denial of service. | ||||
| CVE-2018-3883 | 1 Frappe | 1 Erpnext | 2026-05-08 | 8.8 High |
| An exploitable SQL injection vulnerability exists in the authenticated part of ERPNext v10.1.6. Specially crafted web requests can cause SQL injections resulting in data compromise. The employee and sort_order parameter can be used to perform an SQL injection attack. An attacker can use a browser to trigger these vulnerabilities, and no special tools are required. | ||||
| CVE-2018-3884 | 1 Frappe | 1 Erpnext | 2026-05-08 | 8.8 High |
| An exploitable SQL injection vulnerability exists in the authenticated part of ERPNext v10.1.6. Specially crafted web requests can cause SQL injections resulting in data compromise. The sort_by and start parameter can be used to perform an SQL injection attack. An attacker can use a browser to trigger these vulnerabilities, and no special tools are required. | ||||
| CVE-2018-3885 | 1 Frappe | 1 Erpnext | 2026-05-08 | 8.8 High |
| An exploitable SQL injection vulnerability exists in the authenticated part of ERPNext v10.1.6. Specially crafted web requests can cause SQL injections resulting in data compromise. The order_by parameter can be used to perform an SQL injection attack. An attacker can use a browser to trigger these vulnerabilities, and no special tools are required. | ||||
| CVE-2018-3882 | 1 Frappe | 1 Erpnext | 2026-05-08 | 8.8 High |
| An exploitable SQL injection vulnerability exists in the authenticated part of ERPNext v10.1.6. Specially crafted web requests can cause SQL injections resulting in data compromise. The searchfield parameter can be used to perform an SQL injection attack. An attacker can use a browser to trigger these vulnerabilities, and no special tools are required. | ||||
| CVE-2026-40213 | 2026-05-08 | 7.4 High | ||
| OpenStack Cyborg before 16.0.1 uses rule:allow (check_str='@') as the default policy for multiple API endpoints. This unconditionally authorizes any request carrying a valid Keystone token regardless of roles, project membership, or scope. An authenticated user with zero role assignments can complete various actions such as reprogramming FPGA bitstreams on arbitrary compute nodes via agent RPC. | ||||
| CVE-2025-71297 | 1 Linux | 1 Linux Kernel | 2026-05-08 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: rtw88: 8822b: Avoid WARNING in rtw8822b_config_trx_mode() rtw8822b_set_antenna() can be called from userspace when the chip is powered off. In that case a WARNING is triggered in rtw8822b_config_trx_mode() because trying to read the RF registers when the chip is powered off returns an unexpected value. Call rtw8822b_config_trx_mode() in rtw8822b_set_antenna() only when the chip is powered on. ------------[ cut here ]------------ write RF mode table fail WARNING: CPU: 0 PID: 7183 at rtw8822b.c:824 rtw8822b_config_trx_mode.constprop.0+0x835/0x840 [rtw88_8822b] CPU: 0 UID: 0 PID: 7183 Comm: iw Tainted: G W OE 6.17.5-arch1-1 #1 PREEMPT(full) 01c39fc421df2af799dd5e9180b572af860b40c1 Tainted: [W]=WARN, [O]=OOT_MODULE, [E]=UNSIGNED_MODULE Hardware name: LENOVO 82KR/LNVNB161216, BIOS HBCN18WW 08/27/2021 RIP: 0010:rtw8822b_config_trx_mode.constprop.0+0x835/0x840 [rtw88_8822b] Call Trace: <TASK> rtw8822b_set_antenna+0x57/0x70 [rtw88_8822b 370206f42e5890d8d5f48eb358b759efa37c422b] rtw_ops_set_antenna+0x50/0x80 [rtw88_core 711c8fb4f686162be4625b1d0b8e8c6a5ac850fb] ieee80211_set_antenna+0x60/0x100 [mac80211 f1845d85d2ecacf3b71867635a050ece90486cf3] nl80211_set_wiphy+0x384/0xe00 [cfg80211 296485ee85696d2150309a6d21a7fbca83d3dbda] ? netdev_run_todo+0x63/0x550 genl_family_rcv_msg_doit+0xfc/0x160 genl_rcv_msg+0x1aa/0x2b0 ? __pfx_nl80211_pre_doit+0x10/0x10 [cfg80211 296485ee85696d2150309a6d21a7fbca83d3dbda] ? __pfx_nl80211_set_wiphy+0x10/0x10 [cfg80211 296485ee85696d2150309a6d21a7fbca83d3dbda] ? __pfx_nl80211_post_doit+0x10/0x10 [cfg80211 296485ee85696d2150309a6d21a7fbca83d3dbda] ? __pfx_genl_rcv_msg+0x10/0x10 netlink_rcv_skb+0x59/0x110 genl_rcv+0x28/0x40 netlink_unicast+0x285/0x3c0 ? __alloc_skb+0xdb/0x1a0 netlink_sendmsg+0x20d/0x430 ____sys_sendmsg+0x39f/0x3d0 ? import_iovec+0x2f/0x40 ___sys_sendmsg+0x99/0xe0 ? refill_obj_stock+0x12e/0x240 __sys_sendmsg+0x8a/0xf0 do_syscall_64+0x81/0x970 ? do_syscall_64+0x81/0x970 ? ksys_read+0x73/0xf0 ? do_syscall_64+0x81/0x970 ? count_memcg_events+0xc2/0x190 ? handle_mm_fault+0x1d7/0x2d0 ? do_user_addr_fault+0x21a/0x690 ? exc_page_fault+0x7e/0x1a0 entry_SYSCALL_64_after_hwframe+0x76/0x7e </TASK> ---[ end trace 0000000000000000 ]--- | ||||
| CVE-2026-43290 | 1 Linux | 1 Linux Kernel | 2026-05-08 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: media: uvcvideo: Return queued buffers on start_streaming() failure Return buffers if streaming fails to start due to uvc_pm_get() error. This bug may be responsible for a warning I got running while :; do yavta -c3 /dev/video0; done on an xHCI controller which failed under this workload. I had no luck reproducing this warning again to confirm. xhci_hcd 0000:09:00.0: HC died; cleaning up usb 13-2: USB disconnect, device number 2 WARNING: CPU: 2 PID: 29386 at drivers/media/common/videobuf2/videobuf2-core.c:1803 vb2_start_streaming+0xac/0x120 | ||||
| CVE-2026-43296 | 1 Linux | 1 Linux Kernel | 2026-05-08 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: octeontx2-af: Workaround SQM/PSE stalls by disabling sticky NIX SQ manager sticky mode is known to cause stalls when multiple SQs share an SMQ and transmit concurrently. Additionally, PSE may deadlock on transitions between sticky and non-sticky transmissions. There is also a credit drop issue observed when certain condition clocks are gated. work around these hardware errata by: - Disabling SQM sticky operation: - Clear TM6 (bit 15) - Clear TM11 (bit 14) - Disabling sticky → non-sticky transition path that can deadlock PSE: - Clear TM5 (bit 23) - Preventing credit drops by keeping the control-flow clock enabled: - Set TM9 (bit 21) These changes are applied via NIX_AF_SQM_DBG_CTL_STATUS. With this configuration the SQM/PSE maintain forward progress under load without credit loss, at the cost of disabling sticky optimizations. | ||||
| CVE-2026-43301 | 1 Linux | 1 Linux Kernel | 2026-05-08 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: media: chips-media: wave5: Fix PM runtime usage count underflow Replace pm_runtime_put_sync() with pm_runtime_dont_use_autosuspend() in the remove path to properly pair with pm_runtime_use_autosuspend() from probe. This allows pm_runtime_disable() to handle reference count cleanup correctly regardless of current suspend state. The driver calls pm_runtime_put_sync() unconditionally in remove, but the device may already be suspended due to autosuspend configured in probe. When autosuspend has already suspended the device, the usage count is 0, and pm_runtime_put_sync() decrements it to -1. This causes the following warning on module unload: ------------[ cut here ]------------ WARNING: CPU: 1 PID: 963 at kernel/kthread.c:1430 kthread_destroy_worker+0x84/0x98 ... vdec 30210000.video-codec: Runtime PM usage count underflow! | ||||
| CVE-2026-41693 | 2026-05-08 | 8.2 High | ||
| i18next-fs-backend is a backend layer for i18next using in Node.js and for Deno to load translations from the filesystem. Prior to version 2.6.4, i18next-fs-backend substitutes the lng and ns options directly into the configured loadPath / addPath templates and then read / write the resulting file from disk. The interpolation is unencoded and unvalidated, so a crafted lng or ns value — containing .., a path separator, a control character, a prototype key, or simply an unexpectedly long string — allows an attacker who can influence either value to read or overwrite files outside the intended locale directory. When lng / ns are derived from untrusted input (request-scoped i18next instances behind an HTTP layer such as i18next-http-middleware, or any framework that lets the end user pick the language via query string, cookie, or header), a single request such as ?lng=../../../../etc/passwd causes the backend to attempt to read that path. This issue has been patched in version 2.6.4. | ||||
| CVE-2026-32746 | 1 Gnu | 1 Inetutils | 2026-05-08 | 9.8 Critical |
| telnetd in GNU inetutils through 2.7 allows an out-of-bounds write in the LINEMODE SLC (Set Local Characters) suboption handler because add_slc does not check whether the buffer is full. | ||||
| CVE-2026-41161 | 1 Sync-in | 1 Server | 2026-05-08 | N/A |
| Sync-in Server is a secure, open-source platform for file storage, sharing, collaboration, and syncing. Prior to version 2.2.0, the /api/auth/login endpoint contains a logic flaw that allows unauthenticated remote attackers to enumerate valid usernames by measuring the application's response time. This issue has been patched in version 2.2.0. | ||||
| CVE-2026-43287 | 1 Linux | 1 Linux Kernel | 2026-05-08 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm: Account property blob allocations to memcg DRM_IOCTL_MODE_CREATEPROPBLOB allows userspace to allocate arbitrary-sized property blobs backed by kernel memory. Currently, the blob data allocation is not accounted to the allocating process's memory cgroup, allowing unprivileged users to trigger unbounded kernel memory consumption and potentially cause system-wide OOM. Mark the property blob data allocation with GFP_KERNEL_ACCOUNT so that the memory is properly charged to the caller's memcg. This ensures existing cgroup memory limits apply and prevents uncontrolled kernel memory growth without introducing additional policy or per-file limits. | ||||
| CVE-2026-32935 | 1 Phpseclib | 1 Phpseclib | 2026-05-08 | 5.9 Medium |
| phpseclib is a PHP secure communications library. Projects using versions 0.1.1 through 1.0.26, 2.0.0 through 2.0.51, and 3.0.0 through 3.0.49 are vulnerable to a to padding oracle timing attack when using AES in CBC mode. This issue has been fixed in versions 1.0.27, 2.0.52 and 3.0.50. | ||||
| CVE-2026-40194 | 1 Phpseclib | 1 Phpseclib | 2026-05-08 | 3.7 Low |
| phpseclib is a PHP secure communications library. Starting in 0.1.1 and prior to 3.0.51, 2.0.53, and 1.0.28, phpseclib\Net\SSH2::get_binary_packet() uses PHP's != operator to compare a received SSH packet HMAC against the locally computed HMAC. != on equal-length binary strings in PHP uses memcmp(), which short-circuits on the first differing byte. This is a real variable-time comparison (CWE-208), proven by scaling benchmarks. This vulnerability is fixed in 3.0.51, 2.0.53, and 1.0.28. | ||||
| CVE-2026-43284 | 1 Linux | 1 Linux Kernel | 2026-05-08 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: xfrm: esp: avoid in-place decrypt on shared skb frags MSG_SPLICE_PAGES can attach pages from a pipe directly to an skb. TCP marks such skbs with SKBFL_SHARED_FRAG after skb_splice_from_iter(), so later paths that may modify packet data can first make a private copy. The IPv4/IPv6 datagram append paths did not set this flag when splicing pages into UDP skbs. That leaves an ESP-in-UDP packet made from shared pipe pages looking like an ordinary uncloned nonlinear skb. ESP input then takes the no-COW fast path for uncloned skbs without a frag_list and decrypts in place over data that is not owned privately by the skb. Mark IPv4/IPv6 datagram splice frags with SKBFL_SHARED_FRAG, matching TCP. Also make ESP input fall back to skb_cow_data() when the flag is present, so ESP does not decrypt externally backed frags in place. Private nonlinear skb frags still use the existing fast path. This intentionally does not change ESP output. In esp_output_head(), the path that appends the ESP trailer to existing skb tailroom without calling skb_cow_data() is not reachable for nonlinear skbs: skb_tailroom() returns zero when skb->data_len is nonzero, while ESP tailen is positive. Thus ESP output will either use the separate destination-frag path or fall back to skb_cow_data(). | ||||