Export limit exceeded: 25766 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (25766 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-80526 | 1 Linux | 1 Linux Kernel | 2026-08-28 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ASoC: tas2562: Validate values for volume writes tas2562_volume_control_put() does not do any validation of the control value written by userspace, it uses it to look up a value in a fixed size array which can easily be overflowed and then writes whatever value it gets back to the device. Add validation that we are loading a value we have in the array. | ||||
| CVE-2026-80627 | 1 Linux | 1 Linux Kernel | 2026-08-28 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: MIPS: mm: Fix out-of-bounds write in maar_res_walk() maar_res_walk() uses wi->num_cfg as the index into the fixed-size wi->cfg array, but checks whether the array is full only after it has filled the selected entry. If walk_system_ram_range() reports more than 16 memory ranges, the overflow call writes one struct maar_config past the end of the array before WARN_ON() prevents num_cfg from advancing. Move the full-array check before taking the array slot and return non-zero when the scratch array is full, so walk_system_ram_range() terminates the walk instead of invoking the callback for further ranges. | ||||
| CVE-2026-80525 | 1 Linux | 1 Linux Kernel | 2026-08-28 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ASoC: SOF: ipc4-topology: Refresh copier IPC payload before widget setup The ipc_config_data buffer for copier widgets is built once during ipc_prepare (called from sof_pcm_setup_connected_widgets) and cached for reuse. For host copiers this buffer contains the copier_data with gtw_cfg.node_id (host DMA ID). For DAI copiers it additionally includes a dma_config_tlv trailer with stream_id and dma_channel_id for HDA link DMA. On suspend/resume, both host and link DMA streams are released and re-allocated with potentially different stream tags. The underlying copier_data and dma_config_tlv structures are correctly updated by host_config and sdw_hda_dai_hw_params respectively. However, since the widget list (spcm->stream[].list) persists across suspend, sof_pcm_hw_params skips sof_pcm_setup_connected_widgets and ipc_prepare never runs again to rebuild ipc_config_data. The stale cached payload is then sent to firmware with boot-time DMA channel assignments, causing DMA channel conflicts that lead to firmware errors and crashes. Fix this by refreshing copier_data and dma_config_tlv portions of ipc_config_data in sof_ipc4_widget_setup right before the IPC message is sent. This ensures the payload always reflects the current DMA state regardless of whether ipc_prepare ran. For DAI copiers, the gtw_cfg.config_length in copier_data is temporarily inflated to include the TLV size (matching the ipc_config_data layout) before copying, then restored, mirroring what sof_ipc4_prepare_copier_module does when first building the buffer. | ||||
| CVE-2026-80592 | 1 Linux | 1 Linux Kernel | 2026-08-28 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: samples/damon/mtier: fail early if address range parameters are invalid The comment on top of `struct damon_region` clearly says that For any use case, @ar should be non-zero positive size. which is now verified in damon_verify_new_region() if the kernel is built with DAMON_DEBUG_SANITY. The WARN_ONCE() can be triggered if the mtier sample module is enabled before node{0,1}_{start,end}_addr have been properly initialized, which is obviously not good. ------------[ cut here ]------------ start 0 >= end 0 WARNING: mm/damon/core.c:217 at damon_new_region+0xf4/0x118, CPU#59: bash/341468 Call trace: damon_new_region+0xf4/0x118 (P) damon_set_regions+0xfc/0x3c0 damon_sample_mtier_build_ctx+0xe8/0x3a8 damon_sample_mtier_start+0x1c/0x90 damon_sample_mtier_enable_store+0x98/0xb0 param_attr_store+0xb4/0x128 module_attr_store+0x2c/0x50 sysfs_kf_write+0x58/0x90 kernfs_fop_write_iter+0x16c/0x238 vfs_write+0x2c0/0x370 ksys_write+0x74/0x118 __arm64_sys_write+0x24/0x38 invoke_syscall+0xa8/0x118 el0_svc_common.constprop.0+0x48/0xf0 do_el0_svc+0x24/0x38 el0_svc+0x54/0x370 el0t_64_sync_handler+0xa0/0xe8 el0t_64_sync+0x1ac/0x1b0 ---[ end trace 0000000000000000 ]--- Note that the same issue can happen if detect_node_addresses is true, and node 0 or 1 is memoryless. Fix it together by checking the validity of parameters right before damon_new_region() and fail early if they're invalid. | ||||
| CVE-2026-80519 | 1 Linux | 1 Linux Kernel | 2026-08-28 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: ovpn: finish crypto callback cleanup before peer release Crypto completion callbacks hold both key-slot and peer references. The peer reference pins the netdev, and dropping the last peer reference can let netdev unregistration and module removal make progress. Do not release that peer reference before the callback has finished its own cleanup. If ovpn_crypto_key_slot_put runs after ovpn_peer_put, it can schedule an RCU callback backed by module text after ovpn_cleanup rcu_barrier has already run. The TX error path also freed the remaining skb after ovpn_peer_put, leaving callback cleanup outside the peer/netdev lifetime window. Release the key slot and free any remaining skb first, then drop the peer reference as the last callback action. | ||||
| CVE-2026-80610 | 1 Linux | 1 Linux Kernel | 2026-08-28 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: enetc: fix potential divide-by-zero when num_vsi is zero For i.MX94 series, all the standalone ENETCs do not support SR-IOV, so pf->caps.num_vsi is zero. This leads to a divide-by-zero in enetc4_default_rings_allocation() when distributing rings among PF and VFs. Division by zero is undefined behavior in C. On ARM64, the UDIV/SDIV instructions silently return zero rather than raising an exception, so the issue does not cause a visible crash. However, relying on this behavior is incorrect and poses a cross-platform compatibility risk. Add an explicit check for num_vsi == 0 and return early after the PF's rings have been configured. | ||||
| CVE-2026-80621 | 1 Linux | 1 Linux Kernel | 2026-08-28 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: PCI: dwc: Avoid dwc_pcie_rasdes_debugfs_deinit() NULL dereference when no RAS DES capability dwc_pcie_rasdes_debugfs_init() returns success when the controller has no RAS DES capability, leaving pci->debugfs->rasdes_info unset. The common debugfs teardown path still calls dwc_pcie_rasdes_debugfs_deinit(), which dereferences rasdes_info unconditionally. Return early when no RAS DES state was allocated. In that case no RAS DES mutex was initialized, so there is nothing to destroy. [mani: reworded subject] | ||||
| CVE-2026-80679 | 1 Linux | 1 Linux Kernel | 2026-08-28 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: s390/dasd: Fix potential NULL pointer dereference dasd_release_space() checks the implementation of the is_ese() discipline function before calling it to determine if a given device is an ESE DASD. The current usage of the logical AND operator will lead to a NULL pointer dereference as the function is called even if the function pointer is NULL. Fix this by using the logical OR operator. | ||||
| CVE-2026-74740 | 1 Linux | 1 Linux Kernel | 2026-08-28 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net/sched: act_api: fix TOCTOU NULL deref on a->goto_chain tcf_action_exec() handles TC_ACT_GOTO_CHAIN by first checking rcu_access_pointer(a->goto_chain) and then calling tcf_action_goto_chain_exec(), which does a second, independent rcu_dereference_bh(a->goto_chain) read and immediately dereferences chain->filter_chain. A concurrent tcf_action_set_ctrlact() (e.g. the gact replace path) can clear a->goto_chain between the two reads, so the second read returns NULL and tcf_action_goto_chain_exec() dereferences NULL. Fix the race by doing a single rcu_dereference_bh() read of a->goto_chain in tcf_action_exec(), checking it once for NULL, and passing the resulting chain pointer into tcf_action_goto_chain_exec(). This turns the split check/use into a single check/use on one value. | ||||
| CVE-2026-80594 | 1 Linux | 1 Linux Kernel | 2026-08-28 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: Input: ims-pcu - fix potential infinite loop in CDC union descriptor parsing The driver parses CDC union descriptors in ims_pcu_get_cdc_union_desc() by iterating through the extra descriptor data. However, it does not verify that the bLength of each descriptor is at least 2. A malicious device could provide a descriptor with bLength = 0, leading to an infinite loop in the driver. Add a check to ensure bLength is at least 2 before proceeding with parsing. | ||||
| CVE-2026-80636 | 1 Linux | 1 Linux Kernel | 2026-08-28 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: conntrack: revert ct extension genid infrastructure This infrastructure is not used anymore after moving ct timeout and helper to use datapath refcount to track object use. Revert commit c56716c69ce1 ("netfilter: extensions: introduce extension genid count") this patch disables all ct extensions (leading to NULL) for unconfirmed conntracks, when this is only targeted at ct helper and ct timeout. There is also codebase that dereferences the ct extension without checking for NULL which could lead to crash. | ||||
| CVE-2026-80658 | 1 Linux | 1 Linux Kernel | 2026-08-28 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/rockchip: dw_dp: Fix null-ptr-deref in dw_dp_remove() Attempting to access driver data in the platform driver ->remove() callback may lead to a null pointer dereference since there is no guaranty that the component ->bind() callback invoking platform_set_drvdata() was executed. A common scenario is when Rockchip DRM driver didn't manage to run component_bind_all() because of an (unrelated) error causing early return from rockchip_drm_bind(). Drop the unnecessary call to platform_get_drvdata() and, instead, reference the target device structure via platform_device. | ||||
| CVE-2026-80697 | 1 Linux | 1 Linux Kernel | 2026-08-28 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: erofs: ensure valid f_path for page cache sharing Previously, backing files for page cache sharing were set up with f_path left as NULL (only f_inode was valid). It worked, but a recent mincore fix relies on f_path.mnt and crashes (found by "erofs/028" on 7.2-rc4): BUG: kernel NULL pointer dereference, address: 0000000000000018 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: Oops: 0000 [#1] SMP PTI CPU: 3 UID: 0 PID: 675528 Comm: fincore Not tainted 7.2.0-rc4-00002-g[]-dirty #1 PREEMPT(lazy) Hardware name: Red Hat KVM, BIOS 1.16.0-4.al8 04/01/2014 RIP: 0010:__do_sys_mincore+0xc0/0x2c0 ... Specify valid paths using valid disconnected dentries together with erofs_ishare_mnt instead of leaving f_path empty, so they are more like real backing files in a pseudo filesystem and standard backing_file_open() can be used directly. | ||||
| CVE-2026-80567 | 1 Linux | 1 Linux Kernel | 2026-08-28 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: Input: synaptics-rmi4 - propagate F54 worker errors to V4L2 queue Previously, rmi_f54_buffer_queue() waited for the worker thread to finish but ignored whether it succeeded. If the worker failed (e.g., due to a timeout or register read failure), the queue thread would silently return success, delivering stale or uninitialized memory to userspace. Add a 'report_error' field to struct f54_data to store the worker's exit status. Check this field in rmi_f54_buffer_queue() after the worker finishes, and mark the buffer as VB2_BUF_STATE_ERROR if an error occurred. | ||||
| CVE-2026-80571 | 1 Linux | 1 Linux Kernel | 2026-08-28 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: powerpc/pseries: papr-phy-attest - validate cmd.length, plug mem leak In papr_phy_attest_create_handle(), the params->cmd.length is not validated before use, which can result in a buffer overlow. Check it and return -EINVAL if it is either 0 or exceeds sizeof(params->cmd). Also, params is freed on the success path but not error. Free it on errors after memory allocation. And free it on negative fd. | ||||
| CVE-2026-80575 | 1 Linux | 1 Linux Kernel | 2026-08-28 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: Input: cs40l50-vibra - validate custom data from user space cs40l50_add() copies the custom data of an FF_PERIODIC/FF_CUSTOM effect straight from the ff_effect the user passed to EVIOCSFF, without requiring it to hold anything: work_data.custom_data = memdup_array_user(periodic->custom_data, periodic->custom_len, sizeof(s16)); work_data.custom_len = periodic->custom_len; The driver then reads two words out of that buffer: custom_data[0] as the waveform bank in cs40l50_effect_bank_set(), and custom_data[1] as the index within the bank in cs40l50_effect_index_set(). Neither read is covered by a length check, and custom_len is fully user controlled: - custom_len == 0 makes memdup_array_user() call memdup_user() with a length of zero, which returns ZERO_SIZE_PTR rather than an error, so custom_data[0] dereferences it. - custom_len == 1 allocates two bytes. A bank of ROM or RAM keeps effect->type out of the OWT case, and custom_data[1] is then read one word past the allocation. The bank value itself is also mishandled. It is masked with CS40L50_CUSTOM_DATA_MASK (0xffff) but stored in an s16, so a custom_data[0] of 0x8000 or above wraps to a negative value that passes the "bank_type >= CS40L50_WVFRM_BANK_NUM" test. cs40l50_effect_index_set() indexes vib->dsp.banks[] with it before the switch statement's default case gets a chance to reject it: base_index = vib->dsp.banks[effect->type].base_index; max_index = vib->dsp.banks[effect->type].max_index; Require the two words the driver reads to be present, and hold the masked bank in a u32 so the existing upper-bound test covers the whole range. The da7280 haptic driver already range checks custom_len this way. | ||||
| CVE-2026-80582 | 1 Linux | 1 Linux Kernel | 2026-08-28 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/shmem_helper: Check VMA boundaries for PMD mappings In the ->huge_fault handler do not install a PMD huge page mapping if the huge page exceeds the boundaries of the VMA. All other ->huge_fault handlers have similar checks and the resulting mapping will trigger a VM_BUG_ON_VMA() if it ever reaches copy_pmd_range(). | ||||
| CVE-2026-80539 | 1 Linux | 1 Linux Kernel | 2026-08-28 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: disallow multiple FENCE chunks in one submit amdgpu_cs_pass1() dispatches on chunk_id once per chunk without rejecting repeated ids. p->uf_bo is a single-slot field, so a submission carrying two AMDGPU_CHUNK_ID_FENCE chunks runs amdgpu_cs_p1_user_fence() twice, and the second run overwrites p->uf_bo with a freshly referenced BO without dropping the reference taken by the first. amdgpu_cs_parser_fini() only unrefs the final p->uf_bo, so every FENCE chunk but the last leaks a BO reference. The leaked BO outlives handle close and process exit. Reject duplicate FENCE chunks the same way commit fec5f8e8c6bc ("drm/amdgpu: disallow multiple BO_HANDLES chunks in one submit") did for p->bo_list. (cherry picked from commit 665b1fc2a1845206408f9a2c6da67101789edb82) | ||||
| CVE-2026-80563 | 1 Linux | 1 Linux Kernel | 2026-08-28 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: gpio: sloppy-logic-analyzer: fix use-after-free via debugfs trigger on unbind The "trigger" debugfs file has a hand-rolled ->write handler (trigger_write()) that dereferences the per-device gpio_la_poll_priv. The file is created with debugfs_create_file_unsafe(), and the handler never takes a debugfs reference. Nothing keeps the object alive while the handler runs. priv is allocated with devm_kzalloc(). devres frees it when the platform device is unbound. debugfs_create_file_unsafe() installs no full_proxy wrapper, so debugfs_remove_recursive() in gpio_la_poll_remove() does not wait for an in-flight trigger_write(). The blob_lock taken there does not help, because trigger_write() never takes it. A write that races an unbind therefore writes into freed memory: trigger_write() gpio_la_poll_remove() priv = m->private buf = memdup_user() [may sleep] mutex_lock(&priv->blob_lock) debugfs_remove_recursive() [no wait] mutex_unlock(&priv->blob_lock) (remove returns; devres frees priv) priv->trig_data = buf <-- use-after-free write priv->trig_len = count The race is reachable by root via /sys/bus/platform/drivers/gpio-sloppy-logic-analyzer/unbind. Create "trigger" with debugfs_create_file() instead. Its full_proxy wrapper makes debugfs_remove_recursive() drain any in-flight ->write before it returns. The use-after-free is confirmed under KASAN with a minimal reproducer of the same debugfs_create_file_unsafe() plus devm_kzalloc() pattern (available on request); it produces a slab-use-after-free write in the handler. | ||||
| CVE-2026-80566 | 1 Linux | 1 Linux Kernel | 2026-08-28 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: Input: hynitron_cstxxx - validate touch count and finger IDs The driver allocates max_touch_num input slots, which are indexed from zero through max_touch_num - 1. The current check allows a finger ID equal to max_touch_num to reach cst3xx_report_contact(). While the input core ignores out-of-range slot indices, reporting touch data without a valid slot change corrupts the touch state of the previously active slot. The touch count is read from the controller's report and is used to index the fixed-size report buffer without first checking its range. Reject counts larger than the supported number of touch slots before checking the trailing byte or parsing touch data. Reject finger IDs equal to or greater than max_touch_num, and return immediately when an invalid finger ID is encountered so that corrupt touch frames are discarded instead of reporting partial contact state. The V821 Avaota F1 board configures the vendor driver with one touch slot, so finger ID 1 is already invalid on that device. | ||||