Export limit exceeded: 11010 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (11010 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-97435 | 1 Linux | 1 Linux Kernel | 2026-10-03 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: dsa: sja1105: flower: reject cross-chip redirect dsa_port_from_netdev() may return a valid port from a different switch chip. Programming another chip's port index into the local hardware causes redirection to the wrong port, or an out-of-bounds access if the index exceeds the local chip's port count. Apply a minimal fix that adds a check to catch this case and adjusts the extack message. When cls->common.skip_sw is not set, the operation could instead redirect to the upstream port and let the software or upstream switch(es) handle the forward, but that is not addressed here. | ||||
| CVE-2026-97420 | 1 Linux | 1 Linux Kernel | 2026-10-03 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: bpf: NUL-terminate replaced sysctl value When writing to sysctls, proc_sys_call_handler() guarantees that the buffer passed to proc handlers is NUL-terminated. If bpf_sysctl_set_new_value() replaces the pending sysctl value, it can hand a replacement buffer directly to proc handlers. However, the helper currently copies only buf_len bytes into that buffer without appending a NUL terminator, leaving downstream parsers vulnerable to out-of-bounds access. Fix this by appending a '\0' after the replaced value to restore the expected sysctl semantics. Since the helper already rejects buf_len greater than PAGE_SIZE - 1, there is always room for the extra byte. Reproduced in a QEMU x86_64 guest booted with KASAN while exercising the sysctl replacement path with a cgroup/sysctl BPF program. The reproducer targets `/proc/sys/net/core/flow_limit_cpu_bitmap`, fills the original user write buffer with non-zero bytes, and overrides the sysctl value so the replacement buffer lacks a terminating NUL. Under that setup, the pre-fix kernel reported: BUG: KASAN: slab-out-of-bounds in strnchrnul+0x72/0x90 Read of size 1 at addr ffff88800de57000 by task repro_patch3/66 CPU: 0 UID: 0 PID: 66 Comm: repro_patch3 Not tainted 7.1.0-rc3-00269-g8370ca1f87cc #6 PREEMPT(lazy) Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x68/0xa0 print_report+0xcb/0x5e0 ? __virt_addr_valid+0x21d/0x3f0 ? strnchrnul+0x72/0x90 ? strnchrnul+0x72/0x90 kasan_report+0xca/0x100 ? strnchrnul+0x72/0x90 strnchrnul+0x72/0x90 bitmap_parse+0x37/0x2e0 flow_limit_cpu_sysctl+0xc6/0x840 ? __pfx_flow_limit_cpu_sysctl+0x10/0x10 ? __kvmalloc_node_noprof+0x5ba/0x870 proc_sys_call_handler+0x31d/0x480 ? __pfx_proc_sys_call_handler+0x10/0x10 ? selinux_file_permission+0x39f/0x500 ? lock_is_held_type+0x9e/0x120 vfs_write+0x98e/0x1000 ... </TASK> The buggy address is located 0 bytes to the right of allocated 4096-byte region [ffff88800de56000, ffff88800de57000) With this fix applied, rerunning the same sysctl-targeted path yields no corresponding KASAN reports. | ||||
| CVE-2026-97415 | 1 Linux | 1 Linux Kernel | 2026-10-03 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: tree-checker: validate names in ROOT_REF and ROOT_BACKREF ROOT_REF and ROOT_BACKREF items contain a struct btrfs_root_ref followed by the subvolume name. Several readers assume that this layout is already valid and then use the on-disk name length directly. A corrupted item can therefore make those readers address bytes outside the item, and BTRFS_IOC_GET_SUBVOL_INFO can copy too many bytes into its fixed-size UAPI name buffer. Validate ROOT_REF and ROOT_BACKREF items in tree-checker before any reader uses them. Reject records that do not contain a non-empty name, whose name_len does not exactly describe the remaining item payload, or whose name exceeds BTRFS_NAME_LEN. For BTRFS_IOC_GET_SUBVOL_INFO, copy only the validated on-disk name_len instead of deriving the copy length from the item size. The ioctl result is zeroed when allocated. That leaves the existing trailing zero byte untouched. | ||||
| CVE-2026-97408 | 1 Linux | 1 Linux Kernel | 2026-10-03 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: L2CAP: validate connectionless PSM length Connectionless L2CAP frames carry a two-byte PSM at the start of the payload. l2cap_recv_frame() currently reads that PSM unconditionally after validating only the outer L2CAP length. A malformed connectionless frame with a zero- or one-byte payload can therefore make the parser read beyond the advertised skb payload and use tailroom bytes as part of the PSM. A VHCI-backed QEMU reproducer injected a one-byte connectionless payload and reached the unchecked read. Reject connectionless frames that cannot contain the PSM before reading or pulling it. This preserves all valid connectionless frames while dropping only structurally incomplete packets. | ||||
| CVE-2026-93816 | 1 Linux | 1 Linux Kernel | 2026-10-03 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: f2fs: validate inline dentry name lengths before conversion Inline dentry conversion copies names out of the inline dentry area before checking that each recorded name length fits in the available filename slots. A corrupted image can therefore make the conversion path read past the inline filename storage while building the regular dentry block. Validate each inline dentry name length against the inline filename area before copying it. | ||||
| CVE-2026-93808 | 1 Linux | 1 Linux Kernel | 2026-10-03 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: usb-audio: caiaq: validate EP1 reply lengths usb_ep1_command_reply_dispatch() uses buf[0] as a command byte and then reads command-specific fixed items from the same URB buffer. Several paths use buf + 1, buf[1], buf[2], or buf + 3 without first proving that urb->actual_length contains those bytes. Add per-command length checks, use a payload length derived from the bytes after the command byte for the control-state copy, and reject short analog input payloads before the input helper reads fixed offsets from the EP1 reply. | ||||
| CVE-2026-93807 | 1 Linux | 1 Linux Kernel | 2026-10-03 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: rsi: avoid reading TKIP MIC keys for non-TKIP ciphers rsi_hal_load_key() copies tx_mic_key and rx_mic_key from data[16] and data[24] whenever key data is present. Those offsets are only part of the 32-byte TKIP key layout. Shorter keys used by other ciphers, such as CCMP, do not provide those bytes, so the unconditional copies can read past the supplied key buffer. Only copy the MIC keys for TKIP, and reject malformed TKIP keys that are shorter than the expected 32-byte layout. [drop useless length check] | ||||
| CVE-2026-93806 | 1 Linux | 1 Linux Kernel | 2026-10-03 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: cfg80211: validate assoc response length before status and IE access cfg80211_rx_assoc_resp() initialises the status and response-IE fields of cfg80211_connect_resp_params from the management frame before proving that the frame is long enough for those offsets. S1G and regular association responses also have different IE offsets, but the S1G path only patched resp_ie after the unsafe initialiser had already run. Defer resp_ie, resp_ie_len, and status to after the link-iteration loop. Use a bool to remember whether the frame is S1G, then validate the appropriate minimum length and set all three fields in a single if/else block. Funnel short-frame and SME-reject cleanup through a shared free_bss label for the abandon paths. | ||||
| CVE-2026-93805 | 1 Linux | 1 Linux Kernel | 2026-10-03 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: cfg80211: validate rx/tx MLME callback frame lengths before access cfg80211_rx_mlme_mgmt() and cfg80211_tx_mlme_mgmt() call tracepoints before rejecting frames shorter than the frame-control field. After that, they only require len >= 2 before dispatching into subtype handlers that assume their fixed fields are present. The frames that trip this are not shorter than 2 bytes; they are short relative to their subtype. mwifiex is a concrete in-tree example on the length side: mwifiex_process_mgmt_packet() only requires a 4-address ieee80211_hdr plus the 2-byte firmware length prefix before handing the frame to cfg80211_rx_mlme_mgmt(). After stripping the length prefix and removing addr4, pkt_len can be exactly 24: a bare 3-address management header with no reason-code body. The existing WARN_ON(len < 2) does not fire on such a frame, and cfg80211_process_deauth() then reads u.deauth.reason_code as a two-byte access starting at offset 24, immediately past the 24-byte buffer. Add a frame-control length gate, then validate each subtype's minimum frame size in an if/else-if chain that mirrors the dispatch logic. Trace only after the frame is known to be well-formed. Side effects of this change: - The WARN_ON(len < 2) is dropped. It only guarded the frame_control read, never the subtype fixed fields, and it does not fire on the frames that actually trigger the out-of-bounds read (which are >= 2). The len >= 2 check is kept as the guard before dereferencing frame_control, but without the warning: these are exported callbacks and a malformed frame from a driver should be dropped silently rather than backtraced. - cfg80211_tx_mlme_mgmt() previously routed every non-deauth subtype through disassociation handling; it now silently ignores unrecognised subtypes. | ||||
| CVE-2026-93803 | 1 Linux | 1 Linux Kernel | 2026-10-03 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: libipw: fix key index receive bound checks libipw_rx() reads skb->data[hdrlen + 3] to extract the WEP key index in both the software-decrypt key selection path and the hardware-decrypted IV/ICV strip path. In both places the existing guard only checks skb->len >= hdrlen + 3, which proves bytes up to hdrlen + 2 but not the byte at hdrlen + 3. Require hdrlen + 4 bytes before reading that item in both paths. This is a local source-boundary check only; it does not change the key index semantics. | ||||
| CVE-2026-93799 | 1 Linux | 1 Linux Kernel | 2026-10-03 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: iwlwifi: mvm: validate sta_id in BA window status notif BA_WINDOW_STATUS_NOTIFICATION_ID extracts a 5-bit sta_id from the firmware notification and uses it to index fw_id_to_mac_id[] without bounds checking. Validate sta_id before array access to prevent out-of-bounds indexing. | ||||
| CVE-2026-93797 | 1 Linux | 1 Linux Kernel | 2026-10-03 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: wifi: iwlwifi: mvm: fix an off-by-1 boundary check Before looking at the 11th byte, check the length is big enough. | ||||
| CVE-2026-93791 | 1 Linux | 1 Linux Kernel | 2026-10-03 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: iwlwifi: mvm: add a check on the tid coming from the firmware ba_notif->tid is a firmware-controlled u8 that is used directly as an array index into tid_data[] without any validation. Add a bounds check against IWL_MAX_TID_COUNT before dereferencing the array. | ||||
| CVE-2026-93787 | 1 Linux | 1 Linux Kernel | 2026-10-03 | 8.1 High |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: bound dirent name against end of SMB response in cifs_filldir cifs_filldir() copies the entry name out of an SMB1 TRANS2_FIND_FIRST / FIND_NEXT response using a length (de.namelen) supplied by the server. The kmalloc'd SMB response buffer is bounded, but nothing checks that de.name + de.namelen still lies inside that buffer before the eventual filldir64() -> verify_dirent_name() -> memchr() reads namelen bytes. A hostile SMB1 server that returns an oversized FileNameLength in a directory entry therefore causes memchr() to read past the end of the response slab buffer. Reachable from any user who can list a directory on a CIFS mount served by an attacker-controlled server (getdents64() on the mounted directory): BUG: KASAN: slab-out-of-bounds in memchr+0x71/0x80 Read of size 1 at addr ffff88800e0640cc by task poc/115 Call Trace: dump_stack_lvl+0x64/0x80 print_report+0xce/0x620 kasan_report+0xec/0x120 memchr+0x71/0x80 filldir64+0x4c/0x6a0 cifs_filldir.constprop.0+0x9bb/0x1e00 cifs_readdir+0x2101/0x3380 iterate_dir+0x19c/0x520 __x64_sys_getdents64+0x126/0x210 do_syscall_64+0x107/0x5a0 entry_SYSCALL_64_after_hwframe+0x77/0x7f Pass the end-of-response pointer down to cifs_filldir() and reject entries whose name would extend past that boundary. This bug was discovered by Artiphishell's vTriage pipeline, which generated a userspace reproducer (an emulated hostile SMB1 server plus a getdents64() client) that reliably triggers the KASAN report on an unpatched kernel. The fix below was drafted with the Claude coding assistant; a userspace reproducer is available on request. | ||||
| CVE-2026-89792 | 1 Linux | 1 Linux Kernel | 2026-10-03 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: prevent out-of-bounds reads in share config responses Validate IPC share configuration payload sizes before consuming variable-length fields. Bound veto list parsing and account for the separator byte when deriving the path length. | ||||
| CVE-2026-80836 | 1 Linux | 1 Linux Kernel | 2026-10-03 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: crypto: virtio - bound the akcipher result length virtio_crypto_dataq_akcipher_callback() sets the result length from the device-reported response length without bounding it to the destination buffer, which was allocated for the original request length. sg_copy_from_buffer() then reads that many bytes from the destination buffer; a backend reporting a larger length over-reads adjacent kernel heap into the caller's scatterlist (an out-of-bounds read). Clamp the reported length to the originally requested destination length. A conforming device reports no more than that, so valid results are unaffected. | ||||
| CVE-2026-74291 | 1 Linux | 1 Linux Kernel | 2026-10-03 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ASoC: topology: Check PCM and DAI name strings before use Topology objects store several PCM and DAI names in fixed-size UAPI arrays. Other topology parser paths validate these fields with bounded strnlen() checks before using them as C strings, but the PCM and DAI paths still pass some fixed-size arrays directly to strlen(), devm_kstrdup(), DAI lookup, and diagnostic prints. A malformed topology blob with a non-NUL-terminated PCM, DAI, or stream capability name can therefore make the parser read past the end of the fixed-size field. Reject unterminated PCM and DAI name fields before consuming them as C strings. | ||||
| CVE-2026-74258 | 1 Linux | 1 Linux Kernel | 2026-10-03 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Guard __get_user acesss with access_ok for uprobe_multi data As reported by sashiko [1] we need to use access_ok to check the user space data bounds before we use __get-user to get it. [1] https://lore.kernel.org/bpf/20260610145235.CB1441F00893@smtp.kernel.org/ | ||||
| CVE-2026-69562 | 1 Microsoft | 2 Sql Server 2017, Sql Server 2019 | 2026-10-02 | 6.5 Medium |
| Out-of-bounds read in SQL Server allows an unauthorized attacker to disclose information over a network. | ||||
| CVE-2026-67630 | 1 Microsoft | 4 Sql Server 2017, Sql Server 2019, Sql Server 2022 and 1 more | 2026-10-02 | 6.5 Medium |
| Out-of-bounds read in SQL Server allows an authorized attacker to disclose information over a network. | ||||