Export limit exceeded: 377104 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (377104 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-68419 | 1 Linux | 1 Linux Kernel | 2026-08-13 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/irdma: Prevent rereg_mr for non-mem regions When a QP/CQ/SRQ is created, a two step process is used where the buffer is allocated in userspace and explicitly registered with the normal reg_mr mechanism prior to creating the actual QP/CQ/SRQ object. These special registrations are indicated via an ABI field so the driver knows that they do not have a valid mkey and to skip the actual CQP command submission. Since these are real MR objects from the core's perspective, it is possible for a user application to invoke rereg_mr on them and cause a real CQP op to be emitted with the zero-initialized mkey value of 0. Fix this by preventing rereg_mr on these special regions. | ||||
| CVE-2026-68417 | 1 Linux | 1 Linux Kernel | 2026-08-13 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/siw: publish QP after initialization siw_create_qp() currently calls siw_qp_add() before the queues, CQ pointers, state, completion, and device list entry are ready. A QPN lookup can therefore reach a QP that is still being constructed. Move siw_qp_add() to the end of siw_create_qp(), after QP initialization and before adding the QP to the siw device list. | ||||
| CVE-2026-68415 | 1 Linux | 1 Linux Kernel | 2026-08-13 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: xfrm: clear mode callbacks after failed mode setup xfrm_state_gc_task can run long after a failed IPTFS state setup. In the reproduced case, __xfrm_init_state() cached x->mode_cbs, IPTFS setup returned -ENOMEM before publishing mode_data, and the temporary module reference from xfrm_get_mode_cbs() was dropped immediately. The dead state then kept x->mode_cbs until deferred GC ran after xfrm_iptfs had been unloaded. Clear x->mode_cbs when mode init or clone fails before publishing mode_data. Those states never installed mode-specific state or the long-term IPTFS module pin, so deferred GC has nothing mode-specific to destroy and must not retain a callback table pointer past the temporary lookup reference. The buggy scenario involves two paths, with each column showing the order within that path: failed setup path: 1. cache x->mode_cbs 2. mode setup fails before mode_data 3. drop the temporary module ref 4. dead state keeps x->mode_cbs cached GC/unload path: 1. xfrm_state_put() queues GC work 2. xfrm_iptfs unloads later 3. xfrm_state_gc_task runs 4. GC dereferences stale x->mode_cbs This also covers the failed clone path where clone_state() returns before publishing mode_data. Validation reproduced this kernel report: Kernel panic - not syncing: Fatal exception CONFIG_FAULT_INJECTION_STACKTRACE_FILTER=y failslab_stacktrace_filter matched xfrm_iptfs frames ack_error=-12 FAULT_INJECTION: forcing a failure BUG: unable to handle page fault Workqueue: events xfrm_state_gc_task RIP: xfrm_state_gc_task+0x142/0x650 Modules linked in: esp4_offload xfrm_user [last unloaded: xfrm_iptfs] Kernel panic - not syncing: Fatal exception | ||||
| CVE-2026-68414 | 1 Linux | 1 Linux Kernel | 2026-08-13 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: cfg80211: cancel sched scan results work on unregister cfg80211_sched_scan_results() can queue rdev->sched_scan_res_wk from a driver result notification while a scheduled scan request is present. The work callback recovers the containing cfg80211_registered_device and then locks the wiphy and walks the scheduled-scan request list. wiphy_unregister() already makes the wiphy unreachable and drains rdev work items before cfg80211_dev_free() can release the object, but it does not drain sched_scan_res_wk. A queued or running result work item can therefore cross the unregister/free boundary and access freed rdev state. The buggy scenario involves two paths, with each column showing the order within that path: scheduled-scan result path: unregister/free path: 1. cfg80211_sched_scan_results() 1. interface teardown stops and queues rdev->sched_scan_res_wk. removes the scheduled scan request. 2. cfg80211_wq starts the work 2. wiphy_unregister() drains other item and recovers rdev. rdev work items. 3. The worker locks rdev->wiphy 3. cfg80211_dev_free() destroys and and walks rdev state. frees rdev. Cancel sched_scan_res_wk in wiphy_unregister() alongside the other rdev work items. cancel_work_sync() removes a pending result notification and waits for an already running callback, so cfg80211_dev_free() cannot free rdev while this work item is still active. Validation reproduced this kernel report: BUG: KASAN: use-after-free in cfg80211_sched_scan_results_wk+0x4a6/0x530 Workqueue: cfg80211 cfg80211_sched_scan_results_wk [cfg80211] Read of size 8 Call trace: dump_stack_lvl+0x66/0xa0 print_report+0xce/0x630 cfg80211_sched_scan_results_wk+0x4a6/0x530 srso_alias_return_thunk+0x5/0xfbef5 __virt_addr_valid+0x224/0x430 kasan_report+0xac/0xe0 lockdep_hardirqs_on_prepare+0xea/0x1a0 process_one_work+0x8d0/0x18f0 (kernel/workqueue.c:3212) lock_is_held_type+0x8f/0x100 worker_thread+0x5ad/0xfd0 __kthread_parkme+0xc6/0x200 kthread+0x31e/0x410 trace_hardirqs_on+0x1a/0x170 ret_from_fork+0x576/0x810 __switch_to+0x57e/0xe20 __switch_to_asm+0x33/0x70 ret_from_fork_asm+0x1a/0x30 | ||||
| CVE-2026-68409 | 1 Linux | 1 Linux Kernel | 2026-08-13 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: defer link RX stats percpu free to RCU sta_remove_link() frees a removed MLO link's RX stats percpu buffer right away, but defers only the link container to RCU: sta_info_free_link(&alloc->info); kfree_rcu(alloc, rcu_head); The RX fast path reads link_sta under rcu_read_lock and writes the percpu stats. A reader that resolved link_sta before the removal keeps the pointer. The container stays alive from the kfree_rcu, so the read still works. But the percpu block it points to is already freed. This needs uses_rss. That is when pcpu_rx_stats exists. The full STA teardown frees the deflink stats only after synchronize_net(). The link removal path had no such barrier. The race is hard to win in practice, but the free should still wait for RCU. Free the link together with its data from a single RCU callback, so the percpu block is reclaimed only after readers drain. | ||||
| CVE-2026-68404 | 1 Linux | 1 Linux Kernel | 2026-08-13 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: cfg80211: use wiphy work for socket owner autodisconnect nl80211_netlink_notify() walks the cfg80211 wireless device list when a NETLINK_GENERIC socket is released. If the socket owns a connection, the notifier queues the embedded wdev->disconnect_wk work item. That work is a plain work_struct today. NETDEV_GOING_DOWN cancels it, but a NETLINK_URELEASE notifier that already observed conn_owner_nlportid can queue it after that cancel returns. _cfg80211_unregister_wdev() then removes the wdev from the list and waits for RCU readers, but synchronize_net() does not drain work queued by such a reader. Make the autodisconnect work a wiphy_work instead. The callback already needs the wiphy mutex, and wiphy_work runs under that mutex. This lets teardown cancel pending autodisconnect work while holding the mutex, without a cancel_work_sync() vs. worker locking concern. Also cancel the wiphy work after list_del_rcu() and synchronize_net(). Any NETLINK_URELEASE notifier that had already reached the wdev list has then either queued the work and it is removed, or can no longer find the wdev. | ||||
| CVE-2026-68402 | 1 Linux | 1 Linux Kernel | 2026-08-13 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: cfg80211: bound element ID read when checking non-inheritance cfg80211_is_element_inherited() reads the first data octet of the candidate element (id = elem->data[0]) to look it up in an extension non-inheritance list. It does so after testing elem->id, but without verifying that the element actually has a data octet. A zero-length extension element (WLAN_EID_EXTENSION with length 0) therefore makes it read one octet past the end of the element. _ieee802_11_parse_elems_full() runs this check for every element of a frame once a non-inheritance context exists -- e.g. while parsing a per-STA profile of a Multi-Link element in a (re)association response, or a non-transmitted BSS profile -- so a crafted frame from an AP can trigger a one-octet slab-out-of-bounds read during element parsing: BUG: KASAN: slab-out-of-bounds in cfg80211_is_element_inherited Read of size 1 ... in net/wireless/scan.c Return early (treat the element as inherited) when an extension element carries no data, mirroring the existing handling of empty ID lists. The bug was found by fuzzing ieee802_11_parse_elems_full() under KASAN. | ||||
| CVE-2026-68401 | 1 Linux | 1 Linux Kernel | 2026-08-13 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: firmware: arm_ffa: Fix out-of-bound writes in ffa_setup_and_transmit() Sashiko (locally) reports multiple out-of-bound issues in ffa_setup_and_transmit: 1) Writing ep_mem_access->reserved can write out of bounds for FFA versions < 1.2 as ffa_emad_size_get() returns 16 bytes in that case while reserved has an offset of 24. Instead of zeroing fields, memset the struct to zero first based on the FFA version. 2) Make sure there is enough size to write constituents. While at it, convert the only sizeof() in the driver that uses a type instead of variable. | ||||
| CVE-2026-68400 | 1 Linux | 1 Linux Kernel | 2026-08-13 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: firmware: arm_ffa: Fix Endpoint Memory Access Descriptor offset calculation Use the descriptor's `ep_mem_offset` to calculate the start of the endpoint memory access array and to comply with the FF-A spec instead of defaulting to `sizeof(struct ffa_mem_region)`. This requires moving `ffa_mem_region_additional_setup()` earlier in the setup flow. Also, add sanity checks to ensure the calculated descriptor offsets do not exceed `max_fragsize`. | ||||
| CVE-2026-68399 | 1 Linux | 1 Linux Kernel | 2026-08-13 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Fix UAF in sock clone early bailouts Similar to recent commit 9b51a6155d14 ("bpf,fork: wipe ->bpf_storage before bailouts that access it"), sk_clone() performs an initial shallow copy of the socket field ->sk_bpf_storage via sock_copy() for the cloned socket newsk. If sk_clone() bails out early (e.g. if sk_filter_charge() fails) prior to calling bpf_sk_storage_clone(), newsk->sk_bpf_storage still points to the parent socket's BPF local storage. When newsk is subsequently freed via sk_free(), the deallocation path (__sk_destruct() -> bpf_sk_storage_free()) destroys the parent socket's BPF local storage, leading to a use-after-free (UAF) on the parent socket. Fix this by resetting newsk->sk_bpf_storage to NULL immediately after sock_copy() in sk_clone(), and remove the now redundant initialization from bpf_sk_storage_clone(). | ||||
| CVE-2026-68398 | 1 Linux | 1 Linux Kernel | 2026-08-13 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ppp: defer channel free to an RCU grace period to fix pppol2tp RX UAF pppol2tp_recv() runs in the L2TP UDP-encap softirq RX path: l2tp_udp_encap_recv() -> l2tp_recv_common() -> pppol2tp_recv() -> ppp_input(&po->chan) It runs under rcu_read_lock() holding only an l2tp_session reference and takes NO reference on the internal PPP channel (struct channel, chan->ppp) that ppp_input() dereferences. The pppox socket is SOCK_RCU_FREE, so 'po' and the embedded ppp_channel are RCU-safe. But the internal struct channel is a separate allocation that ppp_release_channel() frees with a plain kfree(): close(data socket) -> pppol2tp_release() -> pppox_unbind_sock() -> ppp_unregister_channel() -> ppp_release_channel() -> kfree(pch) For a channel that is bound (PPPIOCGCHAN) but not attached to a ppp unit (no PPPIOCCONNECT, pch->ppp == NULL) and not bridged, teardown skips both ppp_disconnect_channel()'s synchronize_net() and ppp_unbridge_channels()'s synchronize_rcu(), so the kfree() has no grace period. rcu_read_lock() in pppol2tp_recv() does not protect against a plain kfree(), so an in-flight ppp_input() on one CPU can dereference the channel just freed by close() on another CPU. The bug is reachable by an unprivileged user. Defer the channel free to an RCU callback via call_rcu() so the grace period fences any in-flight ppp_input(). The disconnect and unbridge teardown paths already fence with synchronize_net()/synchronize_rcu(); call_rcu() does the same here without stalling the close() path. | ||||
| CVE-2026-68397 | 1 Linux | 1 Linux Kernel | 2026-08-13 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net/iucv: take a reference on the socket found in afiucv_hs_rcv() afiucv_hs_rcv() looks up the destination socket under iucv_sk_list.lock, drops the lock, and then passes the socket to the afiucv_hs_callback_*() handlers without holding a reference. AF_IUCV sockets are not RCU-protected and are freed synchronously by iucv_sock_kill() -> sock_put(), so a concurrent close can free the socket in the window between read_unlock() and the handler, which then dereferences freed memory (for example sk->sk_data_ready() in afiucv_hs_callback_syn()). Take a reference with sock_hold() while the socket is still on the list and release it with sock_put() once the handler has run. | ||||
| CVE-2026-68394 | 1 Linux | 1 Linux Kernel | 2026-08-13 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: MGMT: revalidate LOAD_CONN_PARAM queued update MGMT_OP_LOAD_CONN_PARAM queues conn_update_sync() when a single parameter update changes an existing LE central connection. The queued work currently stores a borrowed hci_conn_params entry from hdev->le_conn_params. A later LOAD_CONN_PARAM request can clear disabled parameters and free that entry before hci_cmd_sync_work() runs the queued callback. Do not keep the borrowed hci_conn_params pointer in queued work. Queue the hci_conn instead and hold a reference until the queued callback completes. When the work runs, revalidate that the connection is still present, look up the current hci_conn_params entry, and cancel the update if userspace removed that entry while the work was pending. Copy the interval values from the current params entry under hdev->lock, then drop the lock and keep using hci_le_conn_update_sync() to issue the update. Validation reproduced this kernel report: BUG: KASAN: slab-use-after-free in conn_update_sync+0x2a/0xf0 [bluetooth] Read of size 1 at addr ffff88810c697126 by task kworker/u17:0/377 Workqueue: hci0 hci_cmd_sync_work [bluetooth] Call Trace: <TASK> dump_stack_lvl+0x66/0xa0 print_report+0xce/0x5f0 kasan_report+0xe0/0x110 conn_update_sync+0x2a/0xf0 [bluetooth] hci_cmd_sync_work+0x187/0x210 [bluetooth] process_one_work+0x4fd/0xbc0 worker_thread+0x2d8/0x570 kthread+0x1ad/0x1f0 ret_from_fork+0x3c9/0x540 ret_from_fork_asm+0x1a/0x30 Allocated by task 466: hci_conn_params_add+0xa6/0x240 [bluetooth] load_conn_param+0x4e1/0x850 [bluetooth] hci_sock_sendmsg+0x96b/0xf80 [bluetooth] Freed by task 474: kfree+0x313/0x590 hci_conn_params_clear_disabled+0x9b/0xc0 [bluetooth] load_conn_param+0x4bf/0x850 [bluetooth] hci_sock_sendmsg+0x96b/0xf80 [bluetooth] | ||||
| CVE-2026-68393 | 1 Linux | 1 Linux Kernel | 2026-08-13 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_sync: extend conn_hash lookup critical sections Using RCU-protected pointers outside the critical sections without refcount is incorrect and may result to UAF. Extend critical section to cover both hci_conn_hash lookup and use of the returned conn. Add surrounding rcu_read_lock() also when return value is not used, in preparation for RCU lockdep requirement to hci_lookup_le_connect(). This avoids concurrent deletion of the conn before we are done dereferencing it. Also, make sure to hold hdev->lock when accessing hdev->accept_list. | ||||
| CVE-2026-68392 | 1 Linux | 1 Linux Kernel | 2026-08-13 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: mgmt: fix locking in unpair_device/disconnect_sync Dereferencing RCU-protected pointers outside critical sections is invalid and may lead to UAF. Take hdev->lock for hci_conn lookup and hci_abort_conn(). Don't use RCU to ensure the conn is fully initialized at this point. | ||||
| CVE-2026-68391 | 1 Linux | 1 Linux Kernel | 2026-08-13 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: mgmt: hold reference for hci_conn in mgmt_pending_cmds Dereferencing RCU-protected pointers outside critical sections is invalid and may lead to UAF. Use of hci_conn in hci_sync callbacks also needs to hold refcount to avoid UAF. Take appropriate locks for hci_conn lookups, and take refcount for hci_conn pointers stored in mgmt_pending_cmd so that the pointer stays valid. When accessing conn->state, ensure hdev->lock is held to avoid data race. | ||||
| CVE-2026-68390 | 1 Linux | 1 Linux Kernel | 2026-08-13 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_sync: hold hdev->lock for hci_conn_params lookups hci_conn_params_lookup requires hdev->lock be held, otherwise the list iteration or param access is not safe. Hold hdev->lock for params lookups in hci_sync. | ||||
| CVE-2026-68389 | 1 Linux | 1 Linux Kernel | 2026-08-13 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_qca: Clear memdump state on invalid dump size qca_controller_memdump() allocates qca->qca_memdump before processing the first dump packet. For a sequence-zero packet it then disables IBS, marks memdump collection active, and reads the advertised dump size. If the controller reports a zero dump size, the error path frees the local qca_memdump object and returns without clearing qca->qca_memdump or undoing the collection state. A later memdump work item initializes its local pointer from qca->qca_memdump and skips allocation when that pointer is non-NULL, so it can operate on freed memory. The stale collection and IBS-disabled flags can also leave waiters or later transmit handling blocked behind an aborted dump. Clear the saved pointer and memdump state before returning from the invalid-size path, matching the cleanup used when hci_devcd_init() fails. A static analysis checker reported the stale memdump state, and manual source review confirmed the invalid-size failure path. | ||||
| CVE-2026-68388 | 1 Linux | 1 Linux Kernel | 2026-08-13 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: smb/client: handle overlapping allocated ranges in fallocate smb3_simple_fallocate_range() can skip holes when an allocated range returned by the server starts before the current fallocate offset. The skipped hole is not zero-filled, but fallocate still returns success. A later write to that hole may therefore fail with ENOSPC. The function queries allocated ranges so that it can preserve existing contents and write zeroes only into holes. However, the server may return a range that starts before the current fallocate offset. For example, assume the fallocate request is [100, 400) and the only allocated range returned by the server is [0, 200): Request: [100, 400) Server range: [ 0, 200) allocated Correct: [100, 200) allocated data, skip [200, 400) hole, zero-fill Current: [100, 300) skipped [300, 400) zero-filled afterwards The current code adds the full server range length, 200, to the current offset 100 and moves to 300. As a result, the hole in [200, 300) is skipped without being zero-filled. Fix this by advancing only over the part of the allocated range that overlaps the current fallocate offset. Ignore ranges that end before the current offset and reject ranges whose end offset overflows. This also prevents a malformed range length from causing an out-of-bounds zero-buffer read. | ||||
| CVE-2026-68387 | 1 Linux | 1 Linux Kernel | 2026-08-13 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: can: raw: add locking for raw flags bitfield With commit 890e5198a6e5 ("can: raw: use bitfields to store flags in struct raw_sock") the formerly separate integer values have been integrated into a single bitfield. This led to a read-modify-write operation when changing a flag in raw_setsockopt() which now needs a locking to prevent concurrent access. Instead of adding a lock/unlock hell in each of the flag manipulations this patch introduces a wrapper for a new raw_setsockopt_locked() function analogue to the isotp_setsockopt[_locked]() approach in net/can/isotp.c [mkl: use Closes tag instead of Link] | ||||