Export limit exceeded: 429509 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.

Search

Search Results (429509 CVEs found)

CVE Vendors Products Updated CVSS v3.1
CVE-2026-99651 1 Linux 1 Linux Kernel 2026-11-20 N/A
In the Linux kernel, the following vulnerability has been resolved: mm/ksm: reset the unstable trees of all nodes Each full scan resets ksm_nr_node_ids unstable tree roots. Enabling merge_across_nodes resets this count to 1, even if per-node roots were previously allocated. So when toggling "merge_across_nodes" 0 -> 1 -> 0, a scan that starts while the setting is 1 and continues after switching back to 0 can encounter stale unstable tree roots, resulting in UAF. Only root is allowed to change "merge_across_nodes", and the documented sequence is: "merge_across_nodes setting can be changed only when there are no ksm shared pages in the system: set run 2 to unmerge pages first, then to 1 after changing merge_across_nodes, to remerge according to the new setting." Let's fix it by tracking in ksm_nr_node_ids the actual number of allocated tree roots. remove_all_stable_nodes() and ksm_check_stable_tree() will now scan more tree roots (skipping the empty ones), which is harmless.
CVE-2026-99650 1 Linux 1 Linux Kernel 2026-11-20 N/A
In the Linux kernel, the following vulnerability has been resolved: mm/ksm: fix use of a freed anon_vma at swap-in A folio read from a swap slot previously shared by KSM can remain in the swap cache after the process that first mapped it exits. Its anon_vma can then be freed, so ksm_might_need_to_copy() must not dereference it to compare roots. Doing so can result in some false-positives, resulting in the reverse mapping missing the new folio mapping, preventing migration and reclaim. SLAB_TYPESAFE_BY_RCU allows individual anon_vma objects to be reused immediately after freeing. A stale pointer can then refer to another anon_vma whose root matches, even though the target VMA is not linked to that anon_vma. Move the anonymous rmap compatibility checks into folio_anon_rmap_compatible(). Keep the page-index check and compare the folio's anon_vma pointer against the VMA's own anon_vma and root first. If neither matches, bite the bullet and walk the VMA's anon_vma_chain. The VMA keeps these anon_vmas alive, and finding a match guarantees that reverse mapping can find the new mapping. Lorenzo Stoakes says in a private discussion: "This isn't quite equivalent to the existing check. Every anon_vma in an anon_vma_chain shares the same root, but if you split a VMA then fork both of them like this: VMA A / \ <split> VMA B VMA C \ / root <- anon_vma 1 ----^ ^---- <fork> / parent \ anon_vma 2 anon_vma 3 | | VMA D VMA E VMA's D and E both get their own new anon_vma's such that: VMA D: anon_vma 2 -> anon_vma 1 -> root VMA E: anon_vma 3 -> anon_vma 1 -> root And if you found a folio referencing anon_vma 2, the existing check: anon_vma->root == vma->anon-vma->root Would be true for VMA's B, C, D & E. However after your change it'd be true for VMA D only, as it's the only one with anon_vma 2 in its anon_vma_chain. Whether or not that could actually happen in practice... 🙂 I don't know. [...] after your change it'd be true for VMA D only, as it's the only one with anon_vma 2 in its anon_vma_chain. [...] I would [...] say that you are making the test stricter but more correct. " If this affects performance when KSM was never even involved, we could just track whether KSM ever merged anything and just skip these checks. There isn't really a lot we can do otherwise: for mapped folios we might be able to use folio_get_anon_vma(), but for unmapped folios there really is no easy way to see if the anon_vma is still valid. Document the (confusing) lifetime requirements of folio_anon_vma().
CVE-2026-99649 1 Linux 1 Linux Kernel 2026-11-20 N/A
In the Linux kernel, the following vulnerability has been resolved: mm/ksm: check large swap-cache folios before mapping them KSM folios are always small, but their shared swap slots can be read back as part of a large folio in the swap cache. ksm_might_need_to_copy() skips large folios, so another process can map a page with an incompatible anon_vma or page index. Reverse mapping then cannot find the new mapping, preventing migration or reclaim. Apply the same compatibility checks to large folios as to small ones. Pass the page corresponding to the swap entry and copy only that page when necessary. In do_swap_page()'s copy path, decrement only that slot's swap count, because the source swap-cache folio can now be large. Fix generated by an LLM and sent by Chris Mason in private.
CVE-2026-99648 1 Linux 1 Linux Kernel 2026-11-20 N/A
In the Linux kernel, the following vulnerability has been resolved: mm/vma: call ->may_split() before a partial merge A driver can use the ->may_split() hook to forbid a VMA boundary at certain addresses. A device-dax device is a character device that gives raw access to a range of memory through mmap(). device-dax refuses any address that is not a multiple of the device's alignment through vm_ops->may_split. vma_merge_existing_range() can move boundaries, but does not call vm_ops->may_split. If a range at the edge of a VMA gets the attributes of the adjacent VMA, the function moves only that range over to the neighbour: one VMA shrinks and the other grows. This is a partial merge, and vma_modify() tries it before any split. Take a device-dax VMA that lies next to another VMA of the same file. The user calls mprotect() on the one page of the first VMA that touches the second VMA, and asks for the protection that the second VMA already has. The result is a partial merge. It puts the boundary inside a 1 GiB mapping, which is a single leaf entry at the PUD level. As part of the merge, the kernel looks for a huge PMD to split at the new boundary. That code does not expect a PUD leaf: vma_merge_existing_range() commit_merge() vma_adjust_trans_huge() split_huge_pmd_address() mm_find_pmd() treats the PUD leaf as a pointer to a PMD table, so the "table" is the device memory that the leaf maps __split_huge_pmd() reads a PMD that the user wrote to the device memory folio_put() on the folio that this PMD names Bad. While the code must at some point be taught to split PUD entries as well, the issue here is that we move VMA boundaries such that they are incompatible with the driver. Fix this by calling ->may_split() on the address that a partial merge would move the boundary to, and by abandoning the merge if the driver refuses. vma_modify() then tries the split, which fails with -EINVAL. Factor out existing split handling into check_split() and reuse it. Fix generated by an LLM and sent by Chris Mason in private. [ david: improve description; cleanup the code ]
CVE-2026-99647 1 Linux 1 Linux Kernel 2026-11-20 N/A
In the Linux kernel, the following vulnerability has been resolved: mm/huge_memory: split huge PUDs when adjusting VMA boundaries PFN mappings such as VFIO PCI BAR mappings can use PUD leaves while allowing VMA splits at page granularity. However, vma_adjust_trans_huge() only handles PMDs. After faulting a writable PUD-sized VFIO BAR mapping, changing its first page to read-only with mprotect() makes the PMD walk treat the PUD leaf as a PMD table. Applying MADV_DONTFORK to the first PMD-sized chunk leaves the PUD spanning two VMAs: the PMD-aligned boundary skips splitting. Walk the page tables once at each adjusted boundary and split a huge PUD or PMD leaf as needed. Handle PUD leaves even when the boundary is PMD-aligned.
CVE-2026-99646 1 Linux 1 Linux Kernel 2026-11-20 N/A
In the Linux kernel, the following vulnerability has been resolved: mm/vma: don't leak the charge for stack growth acct_stack_growth() charges stack expansion even without VM_ACCOUNT. This can happen for read-only or MAP_NORESERVE mappings created with MAP_GROWSDOWN. Unmapping these VMAs does not release the charge, leaking Committed_AS. Only check and charge growth for VM_ACCOUNT VMAs, matching mremap(). Unaccounted growth skips the overcommit check while remaining subject to the other stack-growth limits.
CVE-2026-99645 1 Linux 1 Linux Kernel 2026-11-20 N/A
In the Linux kernel, the following vulnerability has been resolved: mm/cma: don't release CMA pages still in use When a driver calls dma_free_contiguous() before quiescing DMA, the page might still have a reference from the device. put_page_testzero() there returns false, WARN fires, but the code proceeds to free_contig_frozen_range() putting a live page onto buddy and clearing the bitmap. A subsequent allocation can hand the same PFN to a new owner while the original holder still references it. A concurrent put_page() that drops the last reference between the testzero loop and free_contig_frozen_range() can double-queue the page via page->lru, corrupting buddy lists. Avoid the corruption by not freeing a CMA region if any of the pages inside are still in use. Make it explicit in the warning that the driver allowed a leak. While at it, use page_ref_freeze() to make the semantics clearer and switch to pr_warn_ratelimited(). [ david: use page_ref_freeze() + pr_warn_ratelimited() ]
CVE-2026-99644 1 Linux 1 Linux Kernel 2026-11-20 N/A
In the Linux kernel, the following vulnerability has been resolved: mm/memory-tiers: unregister empty tiers outside memory_tier_lock When offlining a node's last memory empties its tier, clear_node_memory_tier() calls device_unregister() while holding memory_tier_lock. A concurrent sysfs read can hold a kernfs active reference and block in nodelist_show() on that mutex. device_unregister() then waits in kernfs_drain() for the read to finish and release its active reference, while the reader waits for the offlining task to release the mutex. Return the node's former tier from clear_node_memory_tier(), making the helper more similar to set_node_memory_tier(), which also returns a memory_tier pointer. Let the caller unlink an empty tier under memory_tier_lock before rebuilding demotion targets, then unregister its device after dropping the lock.
CVE-2026-99643 1 Linux 1 Linux Kernel 2026-11-20 N/A
In the Linux kernel, the following vulnerability has been resolved: khugepaged: fix readahead lock inversion in collapse_file() collapse_file() can call page_cache_sync_readahead() while still holding source folios locked. If truncate holds mapping->invalidate_lock exclusively and waits for one of those folios, readahead waits for invalidate_lock and neither side can make progress. We need to release those folio locks before starting readahead. On a page cache miss, roll back first, populate the collapse range, and retry once. Doing readahead after rollback avoids an extra pass when all folios are already present. If another miss occurs on retry, give up rather than keep retrying while truncate or reclaim removes folios. Keep page_cache_sync_readahead() and wait for read I/O with filemap_lock_folio(), releasing each folio before moving to the next. The existing uptodate check during collapse still handles read errors. Shmem uses shmem_get_folio() for swapin and fallocated folios without taking mapping->invalidate_lock, so it is unaffected.
CVE-2026-99642 1 Linux 1 Linux Kernel 2026-11-20 N/A
In the Linux kernel, the following vulnerability has been resolved: mm/gup: check folio->mapping under folio lock in memfd_pin_folios() memfd_pin_folios() pins folios from the page cache without taking the folio lock. khugepaged or MADV_COLLAPSE can therefore replace a folio after checking its refcount while memfd_pin_folios() still pins the old folio. The caller then receives a folio which is no longer part of the memfd. For udmabuf and iommufd, this can cause data corruption: DMA accesses the detached folio rather than the live memfd contents. DMA reads can return stale data, while DMA writes update the detached copy and are lost from the live memfd. The detached folio remains pinned, so these accesses do not constitute a use-after-free or target another application's memory. For memfd live update, the stale contents can reappear in the memfd after handover. Lock the folio and recheck folio->mapping before pinning it, like other page cache users do. If the folio was removed, retry the folio lookup from the index that was removed.
CVE-2026-99641 1 Linux 1 Linux Kernel 2026-11-20 N/A
In the Linux kernel, the following vulnerability has been resolved: ovl: fail the mount if the casefold flag has changed An unprivileged user in a user namespace can repeatedly trigger a kernel warning with their own overlay mounts. They do so by changing the casefold flag of the topmost layer's empty root, the top directory of that layer, after the layers are set and before the mount is created. The casefold flag of a directory makes name lookups in that directory case-insensitive. All layers of an overlay must agree on casefolding. ovl_mount_dir_check() reads the casefold flag of a layer root when fsconfig() sets that layer, and saves the result in ofs->casefold. The mount is created later, by another fsconfig() call with FSCONFIG_CMD_CREATE. The casefold flag of an empty directory can be changed. The casefold flag of the overlay root must match ofs->casefold. ovl_get_root() copies the flag from the topmost layer root, as it is when the mount is created. On a mismatch, ovl_get_root() only does a WARN_ON(), and the mount continues. The check is not a WARN_ON_ONCE(), so each such mount warns again. An unprivileged user needs CONFIG_UNICODE, and a tmpfs mounted with the casefold option in their namespace. Reproduced by changing the casefold flag of the empty upper directory after the layers were set and before FSCONFIG_CMD_CREATE, with tmpfs and ext4 layers, and as uid 1000 in a user namespace. Fix this by replacing the WARN_ON() with a check that fails the mount with -EINVAL.
CVE-2026-99640 1 Linux 1 Linux Kernel 2026-11-20 N/A
In the Linux kernel, the following vulnerability has been resolved: ovl: do not let chattr change the casefold flag chattr +F or -F on an overlay directory can make the directory, or the whole mount, unusable. Lookups of the directory, and lookups in it, then fail. From code inspection, the caller only needs to own the directory. The upper filesystem must support casefolding: ext4 or f2fs with the casefold feature, or tmpfs with the casefold option. chattr +F and -F set and clear FS_CASEFOLD_FL, the casefold flag of a directory. The flag enables casefolding (case-insensitive name lookup) for the directory. All directories of an overlay must match the casefold state that was recorded at mount time, and ovl_lookup_single() enforces this: - A lookup in a directory that does not match fails with -ESTALE. - A lookup of the directory itself fails with -EREMOTE. ovl_fileattr_set() copies the directory up, which creates it in the upper layer if it only existed in a lower layer. It then passes FS_CASEFOLD_FL on to the upper filesystem. The upper filesystem accepts the change if the upper directory is empty, regardless of what the merged directory contains. The merged directory is the one that the user sees, with the names from the upper and the lower directories. After the change the upper directory no longer matches the mount. If the directory is the root of the overlay, the whole mount is affected. The flag can also change without chattr +F or -F. chattr reads all flags of a directory, changes one and writes all of them back. For a directory that only exists in a lower layer, overlayfs reads the flags from the lower filesystem. xfs with the ascii-ci feature reports FS_CASEFOLD_FL on every inode, but never sets S_CASEFOLD, the inode flag that overlayfs compares with the mount. So its directories count as not casefolded. With a lower layer on such an xfs and an upper layer on ext4 with the casefold feature, chattr +A on a lower-only directory therefore sets FS_CASEFOLD_FL on the new, empty upper directory. Reproduced as root on tmpfs and on ext4 with chattr +F or -F on an overlay directory whose upper directory was empty. Afterwards lookups below it failed with ESTALE, and lookups of the directory itself failed with EREMOTE. The chattr +A case was seen once, on a kernel with an earlier form of this patch that still passed the caller's flag on: lookups of the directory failed with EREMOTE. Fix this by returning -EOPNOTSUPP if FS_IOC_SETFLAGS, the only call that can change the flag, asks for a casefold flag on a directory that does not agree with the casefold state of the mount. This also refuses the chattr +A case above. [amir: check the flag against the casefold state of the mount instead of reading back the flags]
CVE-2026-99639 1 Linux 1 Linux Kernel 2026-11-20 N/A
In the Linux kernel, the following vulnerability has been resolved: ovl: fix whiteout creation in casefolded directories unlink and rmdir fail with EINVAL on an overlay with casefolded (case-insensitive) layers, if the name exists in a lower layer. Casefolded layers need CONFIG_UNICODE. Root can mount such an overlay, and so can an unprivileged user in a user namespace, with tmpfs layers. Overlayfs does not change a lower layer. To remove a name that exists there, it hides the name with a marker file, a whiteout. It creates the whiteout in the work directory, a scratch directory on the upper filesystem, and renames it over the name in the upper directory: - ovl_whiteout() creates the whiteout with mknod, or as a hard link to an earlier whiteout. - ovl_cleanup_and_whiteout() then prepares the rename with start_renaming_two_dentries(), which returns -EINVAL if the source or the target dentry is unhashed, that is, not in the dentry hash table. With casefolded directories, both dentries can be unhashed: - The target. Lookup in a casefolded directory leaves a negative dentry unhashed, so the rename target is unhashed if the name does not exist in the upper directory. - The source, which is the new whiteout. tmpfs hashes a dentry when mknod or link makes it positive, but ext4 does not, so on ext4 the source is unhashed as well. The cleanup after the failure also refuses an unhashed dentry, so on ext4 the whiteout is left behind in the work directory. Reproduced with rm and rmdir on casefolded tmpfs and ext4 layers, also as uid 1000 in a user namespace. Fix this by creating the whiteout with ovl_create_temp(), which repeats the lookup if the new dentry is unhashed. Prepare the rename with start_renaming_dentry(), which looks up the target name with the directories locked. The caller looked the name up without a lock, so return -ESTALE if the name now refers to a different inode. [amir: pass the name used for lookup instead of taking a name snapshot]
CVE-2026-99638 1 Linux 1 Linux Kernel 2026-11-20 N/A
In the Linux kernel, the following vulnerability has been resolved: net/sched: clamp skb->queue_mapping before indexing the tx queue This issue was caught by Sashiko (nipa). A producer-side path cap is already merged (ea4d4b5dddb5); this patch adds the matching consumer-side caps. The issue: The tx queue is picked and capped in netdev_core_pick_tx() before the __dev_xmit_skb() qdisc enqueue path. A tc BPF program running inside an egress qdisc (not clsact) can then change __sk_buff->queue_mapping; that store is never re-checked. bpf_convert_ctx_access() bounds it only by NO_QUEUE_MAPPING, not by the device's queue count. Two consumers read the stale value: - On dequeue, qdisc_restart() calls netdev_get_tx_queue(), which indexes dev->_tx[]. netdev_get_tx_queue() guards it with just a DEBUG_NET_WARN_ON_ONCE, so sch_direct_xmit() takes the out-of-bounds txq->_xmit_lock and writes txq->xmit_lock_owner past the end of the allocation on non-lltx devices such as ifb. Drivers that index their rings from skb_get_queue_mapping() (ex: ifb) go out of range the same way. - On enqueue, taprio_enqueue() indexes q->qdiscs[] with the same value; the array is sized dev->num_tx_queues. A duplicating netem on a child qdisc clones the skb and re-enqueues the clone at the taprio root (qdisc_root_bh()) through a direct rootq->enqueue() call, so the value reaches taprio_enqueue() before any dequeue cap runs. The Fix: Cap the mapping at the consumers and write the capped value back, so the qdisc's _tx[] lookup, the taprio q->qdiscs[] lookup and any later driver read stay in range. On the dequeue side the cap folds into the dequeue path instead of a separate walk over the returned list: dequeue_skb() caps the head, and each bulk helper caps the element it appends. For a qdisc that is not TCQ_F_ONETXQUEUE, netdev_cap_txqueue() logs a ratelimited notice and selects queue 0. A TCQ_F_ONETXQUEUE qdisc is bound to a single tx queue: dequeue_skb() uses q->dev_queue for the frozen check, the BQL limit and the trace point, while qdisc_restart() transmits on the skb's queue. Capping an out-of-range mapping to queue 0 would therefore send a per-queue child's skb through a different queue than the one it was dequeued for. On mq, mqprio, taprio and htb offload children, a stopped queue 0 could then park the list in q->gso_skb, and the later wake would schedule queue 0's own child instead of this qdisc. Pin a TCQ_F_ONETXQUEUE mapping to the qdisc's own queue to keep the documented invariant. The pin covers every mapping, not only an out-of-range one: an in-range mapping that a filter sets on one of those per-queue children is rewritten to the child's own queue, and this path does not call netdev_cap_txqueue(), so it logs no notice. On a single-queue device qdisc_create() sets TCQ_F_ONETXQUEUE, so the one-queue trigger described below also takes this branch and is corrected without a notice. That also keeps a bulk list on one queue by construction: every element of a TCQ_F_ONETXQUEUE qdisc, including a follower changed by a filter, is pinned to q->dev_queue before it is appended. The fast bulk helper therefore needs no head comparison and no skb_bad_txq requeue; the slow helper, used only by non-ONETXQUEUE qdiscs, still compares and requeues a mismatched follower, where a wake on any queue reschedules q. On the enqueue side taprio_enqueue() caps the mapping against real_num_tx_queues and writes it back before selecting q->qdiscs[queue], so a duplicating child cannot steer the clone out of the array. Conditions to recreate the bug: The dequeue path: load a SCHED_CLS or SCHED_ACT program that stores __sk_buff->queue_mapping (a tc BPF action is enough), attach it to a transmit qdisc (for example a matchall filter on a prio root), and send a packet. With a 1-queue device a store of 1 indexes one past dev->_tx[]. Under KASAN with panic_on_warn=1 the unfixed kernel faults with "BUG: KASAN: slab-out- ---truncated---
CVE-2026-99637 1 Linux 1 Linux Kernel 2026-11-20 N/A
In the Linux kernel, the following vulnerability has been resolved: ovl: inherit FMODE_NONOTIFY when opening directory realfiles When fanotify hands a listener an fd for a permission event on an overlay directory, ovl_dir_open_realfile() opens the real directory via dentry_open(), not backing_file_open(), so the lower open could still raise FS_OPEN_PERM and deadlock a listener that also marks the backing filesystem. Export dentry_open_nonotify() and call it from ovl_path_open_realfile() when the overlay user file must not generate events. Ordinary ovl_path_open() callers are unchanged.
CVE-2026-99636 1 Linux 1 Linux Kernel 2026-11-20 N/A
In the Linux kernel, the following vulnerability has been resolved: net: reject a negative TCP header offset in qdisc_pkt_len_segs_init() qdisc_pkt_len_segs_init() stores skb_transport_offset(), or the inner offset, in the unsigned hdr_len. A header in front of skb->data gives a negative offset. For an offset a little below zero, pskb_may_pull() gets a small length and succeeds. Then a 64-bit kernel reads the TCP header far after the skb and can crash. Further below zero pskb_may_pull() fails. Commit 28a57fb2c5df ("net: iptunnel: fix stale transport header during tunnel decapsulation") fixed one source of such offsets. Other code that removes bytes from the front of a packet can leave the same stale header. Return SKB_DROP_REASON_SKB_BAD_GSO for a negative offset in the TCP branch. SKB_GSO_UDP_L4 and the other GSO types read no header and still get a wrong qdisc_pkt_len(). On a 64-bit kernel only packets that cause the read after the skb today get a new result. Then __dev_queue_xmit() drops them and returns -EINVAL, but sch_handle_ingress() ignores the result. Their content can be valid. Thus the code that leaves the header stale needs its own fix.
CVE-2026-99635 1 Linux 1 Linux Kernel 2026-11-20 N/A
In the Linux kernel, the following vulnerability has been resolved: vhost/vsock: size receive SKBs from declared payload vhost_vsock_alloc_skb() sizes the skb from iov_length(), the total guest descriptor length. virtio_transport_inc_rx_pkt() instead adds hdr->len to rx_bytes and buf_used, and budgets each queued skb as SKB_TRUESIZE(0). The guest controls the descriptor length and hdr->len independently. A guest can therefore provide a 64 KiB descriptor while declaring a zero payload. The descriptor-sized skb remains queued, rx_bytes and buf_used remain unchanged, and only the fixed queue-entry budget limits retention. This is not a lifetime leak: the skb is freed when dequeued or at socket teardown. Repeating this across connections can nevertheless exhaust host memory. On Linux v7.2, 455 such descriptors retained 30,255,680 bytes for a 262,144-byte receive buffer; a full-payload control retained 265,984 bytes. Vhost previously read hdr->len and allocated pkt->buf from that value. The conversion from virtio_vsock_pkt to sk_buff instead allocated receive skbs from the descriptor length, introducing the allocation-accounting mismatch. Copy the header into a stack object and validate hdr->len before allocating the skb. Size the allocation as sizeof(hdr) + payload_len so descriptor capacity no longer determines queued memory. Check payload_len against len - sizeof(hdr) to avoid addition overflow on 32-bit hosts.
CVE-2026-99634 1 Linux 1 Linux Kernel 2026-11-20 N/A
In the Linux kernel, the following vulnerability has been resolved: mptcp: do not use Fast Open on MP_JOIN subflows tcp_fastopen_create_child() hands the SYN packet itself to subflow_syn_recv_sock(). For an MP_JOIN request this takes the fatal fallback: the cloned child is destroyed and handed back with drop_req flagged, but tcp_fastopen_create_child() does not check the flag and queues it, so accept() can expose the freed child. MP_JOIN cannot use Fast Open: data on a subflow requires the completed HMAC exchange (RFC 8684, sec. 3.2). Refuse it (only the TFO path passes a SYN skb here) and let tcp_conn_request() fall back to the regular MP_JOIN handshake; also strip the Fast Open cookie from MP_JOIN SYN/ACKs. [ Moving code to avoid clearing TS and consolidating checks. ]
CVE-2026-99633 1 Linux 1 Linux Kernel 2026-11-20 N/A
In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: keep the CS user fence BO in GTT The CS ioctl hands the GPU the GART address of the user fence BO, but since the BO keeps its own preferred and allowed domains, it no longer makes sure the BO is in GTT. A user fence in a VRAM BO, which only needs to be a page in size, gets its address from amdgpu_bo_gpu_offset(), which warns about non-contiguous VRAM. On navi31, a CS with a user fence in a 4K VRAM BO, or in one created with AMDGPU_GEM_CREATE_VM_ALWAYS_VALID: WARNING: amdgpu_object.c:1531 at amdgpu_bo_gpu_offset+0x86/0xb0 [amdgpu], CPU#11: cs_gem_checks/18393 RIP: 0010:amdgpu_bo_gpu_offset+0x86/0xb0 [amdgpu] Call Trace: <TASK> amdgpu_cs_parser_bos.isra.0+0x4eb/0x850 [amdgpu] amdgpu_cs_ioctl+0x97e/0x2510 [amdgpu] drm_ioctl_kernel+0xac/0x110 [drm] drm_ioctl+0x2c6/0x5b0 [drm] __x64_sys_ioctl+0xa0/0xf0 do_syscall_64+0xa3/0x4d0 entry_SYSCALL_64_after_hwframe+0x76/0x7e and BOs which can't be in GTT at all, like GWS or OA ones of a page in size, pass the checks as well. Only take BOs which can't be anywhere else than in GTT as user fence, which the CS then validates there along with its other BOs. While at it, detect userptrs with amdgpu_ttm_tt_is_userptr(); amdgpu_ttm_tt_get_usermm() returns NULL once the task which created the userptr is gone. v2: only take BOs which can only be in GTT instead of special casing the user fence BO in the validation, use amdgpu_ttm_tt_is_userptr() (Christian) (cherry picked from commit f16989def9561d04d0f2e77216f5319112d29bf1)
CVE-2026-99632 1 Linux 1 Linux Kernel 2026-11-20 N/A
In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: use the queue's process info for the WPTR BO eviction fence amdgpu_amdkfd_map_gtt_bo_to_gart() removes the eviction fence of bo->vm_bo->vm->process_info from the WPTR BO of a new queue. bo->vm_bo is the VM which opened the BO last, not necessarily the KFD process' VM, and a render node VM has no process info. On navi31, an unprivileged process which exports its WPTR BO with AMDKFD_IOC_EXPORT_DMABUF and imports it on a second render node fd oopses in AMDKFD_IOC_CREATE_QUEUE: BUG: kernel NULL pointer dereference, address: 0000000000000060 RIP: 0010:amdgpu_amdkfd_map_gtt_bo_to_gart+0x86/0x1a0 [amdgpu] init_user_queue.part.0+0x180/0x250 [amdgpu] pqm_create_queue+0x32d/0x730 [amdgpu] kfd_ioctl_create_queue+0x583/0x9f0 [amdgpu] Pass the process info of the queue instead. With the fix, the queue is created and destroyed normally. (cherry picked from commit 6b4157498a176bd1c6083f6bb5aaf8a257a2027e)