Export limit exceeded: 79564 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 347735 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (347735 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-43009 | 1 Linux | 1 Linux Kernel | 2026-05-03 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Fix incorrect pruning due to atomic fetch precision tracking When backtrack_insn encounters a BPF_STX instruction with BPF_ATOMIC and BPF_FETCH, the src register (or r0 for BPF_CMPXCHG) also acts as a destination, thus receiving the old value from the memory location. The current backtracking logic does not account for this. It treats atomic fetch operations the same as regular stores where the src register is only an input. This leads the backtrack_insn to fail to propagate precision to the stack location, which is then not marked as precise! Later, the verifier's path pruning can incorrectly consider two states equivalent when they differ in terms of stack state. Meaning, two branches can be treated as equivalent and thus get pruned when they should not be seen as such. Fix it as follows: Extend the BPF_LDX handling in backtrack_insn to also cover atomic fetch operations via is_atomic_fetch_insn() helper. When the fetch dst register is being tracked for precision, clear it, and propagate precision over to the stack slot. For non-stack memory, the precision walk stops at the atomic instruction, same as regular BPF_LDX. This covers all fetch variants. Before: 0: (b7) r1 = 8 ; R1=8 1: (7b) *(u64 *)(r10 -8) = r1 ; R1=8 R10=fp0 fp-8=8 2: (b7) r2 = 0 ; R2=0 3: (db) r2 = atomic64_fetch_add((u64 *)(r10 -8), r2) ; R2=8 R10=fp0 fp-8=mmmmmmmm 4: (bf) r3 = r10 ; R3=fp0 R10=fp0 5: (0f) r3 += r2 mark_precise: frame0: last_idx 5 first_idx 0 subseq_idx -1 mark_precise: frame0: regs=r2 stack= before 4: (bf) r3 = r10 mark_precise: frame0: regs=r2 stack= before 3: (db) r2 = atomic64_fetch_add((u64 *)(r10 -8), r2) mark_precise: frame0: regs=r2 stack= before 2: (b7) r2 = 0 6: R2=8 R3=fp8 6: (b7) r0 = 0 ; R0=0 7: (95) exit After: 0: (b7) r1 = 8 ; R1=8 1: (7b) *(u64 *)(r10 -8) = r1 ; R1=8 R10=fp0 fp-8=8 2: (b7) r2 = 0 ; R2=0 3: (db) r2 = atomic64_fetch_add((u64 *)(r10 -8), r2) ; R2=8 R10=fp0 fp-8=mmmmmmmm 4: (bf) r3 = r10 ; R3=fp0 R10=fp0 5: (0f) r3 += r2 mark_precise: frame0: last_idx 5 first_idx 0 subseq_idx -1 mark_precise: frame0: regs=r2 stack= before 4: (bf) r3 = r10 mark_precise: frame0: regs=r2 stack= before 3: (db) r2 = atomic64_fetch_add((u64 *)(r10 -8), r2) mark_precise: frame0: regs= stack=-8 before 2: (b7) r2 = 0 mark_precise: frame0: regs= stack=-8 before 1: (7b) *(u64 *)(r10 -8) = r1 mark_precise: frame0: regs=r1 stack= before 0: (b7) r1 = 8 6: R2=8 R3=fp8 6: (b7) r0 = 0 ; R0=0 7: (95) exit | ||||
| CVE-2026-43006 | 1 Linux | 1 Linux Kernel | 2026-05-03 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: io_uring/rsrc: reject zero-length fixed buffer import validate_fixed_range() admits buf_addr at the exact end of the registered region when len is zero, because the check uses strict greater-than (buf_end > imu->ubuf + imu->len). io_import_fixed() then computes offset == imu->len, which causes the bvec skip logic to advance past the last bio_vec entry and read bv_offset from out-of-bounds slab memory. Return early from io_import_fixed() when len is zero. A zero-length import has no data to transfer and should not walk the bvec array at all. BUG: KASAN: slab-out-of-bounds in io_import_reg_buf+0x697/0x7f0 Read of size 4 at addr ffff888002bcc254 by task poc/103 Call Trace: io_import_reg_buf+0x697/0x7f0 io_write_fixed+0xd9/0x250 __io_issue_sqe+0xad/0x710 io_issue_sqe+0x7d/0x1100 io_submit_sqes+0x86a/0x23c0 __do_sys_io_uring_enter+0xa98/0x1590 Allocated by task 103: The buggy address is located 12 bytes to the right of allocated 584-byte region [ffff888002bcc000, ffff888002bcc248) | ||||
| CVE-2026-31786 | 1 Linux | 1 Linux Kernel | 2026-05-03 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: Buffer overflow in drivers/xen/sys-hypervisor.c The build id returned by HYPERVISOR_xen_version(XENVER_build_id) is neither NUL terminated nor a string. The first causes a buffer overflow as sprintf in buildid_show will read and copy till it finds a NUL. 00000000 f4 91 51 f4 dd 38 9e 9d 65 47 52 eb 10 71 db 50 |..Q..8..eGR..q.P| 00000010 b9 a8 01 42 6f 2e 32 |...Bo.2| 00000017 So use a memcpy instead of sprintf to have the correct value: 00000000 f4 91 51 f4 dd 00 9e 9d 65 47 52 eb 10 71 db 50 |..Q.....eGR..q.P| 00000010 b9 a8 01 42 |...B| 00000014 (the above have a hack to embed a zero inside and check it's returned correctly). This is XSA-485 / CVE-2026-31786 | ||||
| CVE-2026-31782 | 1 Linux | 1 Linux Kernel | 2026-05-03 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: perf/x86: Fix potential bad container_of in intel_pmu_hw_config Auto counter reload may have a group of events with software events present within it. The software event PMU isn't the x86_hybrid_pmu and a container_of operation in intel_pmu_set_acr_caused_constr (via the hybrid helper) could cause out of bound memory reads. Avoid this by guarding the call to intel_pmu_set_acr_caused_constr with an is_x86_event check. | ||||
| CVE-2026-31780 | 1 Linux | 1 Linux Kernel | 2026-05-03 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: wilc1000: fix u8 overflow in SSID scan buffer size calculation The variable valuesize is declared as u8 but accumulates the total length of all SSIDs to scan. Each SSID contributes up to 33 bytes (IEEE80211_MAX_SSID_LEN + 1), and with WILC_MAX_NUM_PROBED_SSID (10) SSIDs the total can reach 330, which wraps around to 74 when stored in a u8. This causes kmalloc to allocate only 75 bytes while the subsequent memcpy writes up to 331 bytes into the buffer, resulting in a 256-byte heap buffer overflow. Widen valuesize from u8 to u32 to accommodate the full range. | ||||
| CVE-2026-31779 | 1 Linux | 1 Linux Kernel | 2026-05-03 | 8.1 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: iwlwifi: mvm: fix potential out-of-bounds read in iwl_mvm_nd_match_info_handler() The memcpy function assumes the dynamic array notif->matches is at least as large as the number of bytes to copy. Otherwise, results->matches may contain unwanted data. To guarantee safety, extend the validation in one of the checks to ensure sufficient packet length. Found by Linux Verification Center (linuxtesting.org) with SVACE. | ||||
| CVE-2026-31773 | 1 Linux | 1 Linux Kernel | 2026-05-03 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: SMP: derive legacy responder STK authentication from MITM state The legacy responder path in smp_random() currently labels the stored STK as authenticated whenever pending_sec_level is BT_SECURITY_HIGH. That reflects what the local service requested, not what the pairing flow actually achieved. For Just Works/Confirm legacy pairing, SMP_FLAG_MITM_AUTH stays clear and the resulting STK should remain unauthenticated even if the local side requested HIGH security. Use the established MITM state when storing the responder STK so the key metadata matches the pairing result. This also keeps the legacy path aligned with the Secure Connections code, which already treats JUST_WORKS/JUST_CFM as unauthenticated. | ||||
| CVE-2026-31772 | 1 Linux | 1 Linux Kernel | 2026-05-03 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_sync: fix stack buffer overflow in hci_le_big_create_sync hci_le_big_create_sync() uses DEFINE_FLEX to allocate a struct hci_cp_le_big_create_sync on the stack with room for 0x11 (17) BIS entries. However, conn->num_bis can hold up to HCI_MAX_ISO_BIS (31) entries — validated against ISO_MAX_NUM_BIS (0x1f) in the caller hci_conn_big_create_sync(). When conn->num_bis is between 18 and 31, the memcpy that copies conn->bis into cp->bis writes up to 14 bytes past the stack buffer, corrupting adjacent stack memory. This is trivially reproducible: binding an ISO socket with bc_num_bis = ISO_MAX_NUM_BIS (31) and calling listen() will eventually trigger hci_le_big_create_sync() from the HCI command sync worker, causing a KASAN-detectable stack-out-of-bounds write: BUG: KASAN: stack-out-of-bounds in hci_le_big_create_sync+0x256/0x3b0 Write of size 31 at addr ffffc90000487b48 by task kworker/u9:0/71 Fix this by changing the DEFINE_FLEX count from the incorrect 0x11 to HCI_MAX_ISO_BIS, which matches the maximum number of BIS entries that conn->bis can actually carry. | ||||
| CVE-2026-31771 | 1 Linux | 1 Linux Kernel | 2026-05-03 | 8.1 High |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_event: move wake reason storage into validated event handlers hci_store_wake_reason() is called from hci_event_packet() immediately after stripping the HCI event header but before hci_event_func() enforces the per-event minimum payload length from hci_ev_table. This means a short HCI event frame can reach bacpy() before any bounds check runs. Rather than duplicating skb parsing and per-event length checks inside hci_store_wake_reason(), move wake-address storage into the individual event handlers after their existing event-length validation has succeeded. Convert hci_store_wake_reason() into a small helper that only stores an already-validated bdaddr while the caller holds hci_dev_lock(). Use the same helper after hci_event_func() with a NULL address to preserve the existing unexpected-wake fallback semantics when no validated event handler records a wake address. Annotate the helper with __must_hold(&hdev->lock) and add lockdep_assert_held(&hdev->lock) so future call paths keep the lock contract explicit. Call the helper from hci_conn_request_evt(), hci_conn_complete_evt(), hci_sync_conn_complete_evt(), le_conn_complete_evt(), hci_le_adv_report_evt(), hci_le_ext_adv_report_evt(), hci_le_direct_adv_report_evt(), hci_le_pa_sync_established_evt(), and hci_le_past_received_evt(). | ||||
| CVE-2026-31769 | 1 Linux | 1 Linux Kernel | 2026-05-03 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: gpib: fix use-after-free in IO ioctl handlers The IBRD, IBWRT, IBCMD, and IBWAIT ioctl handlers use a gpib_descriptor pointer after board->big_gpib_mutex has been released. A concurrent IBCLOSEDEV ioctl can free the descriptor via close_dev_ioctl() during this window, causing a use-after-free. The IO handlers (read_ioctl, write_ioctl, command_ioctl) explicitly release big_gpib_mutex before calling their handler. wait_ioctl() is called with big_gpib_mutex held, but ibwait() releases it internally when wait_mask is non-zero. In all four cases, the descriptor pointer obtained from handle_to_descriptor() becomes unprotected. Fix this by introducing a kernel-only descriptor_busy reference count in struct gpib_descriptor. Each handler atomically increments descriptor_busy under file_priv->descriptors_mutex before releasing the lock, and decrements it when done. close_dev_ioctl() checks descriptor_busy under the same lock and rejects the close with -EBUSY if the count is non-zero. A reference count rather than a simple flag is necessary because multiple handlers can operate on the same descriptor concurrently (e.g. IBRD and IBWAIT on the same handle from different threads). A separate counter is needed because io_in_progress can be cleared from unprivileged userspace via the IBWAIT ioctl (through general_ibstatus() with set_mask containing CMPL), which would allow an attacker to bypass a check based solely on io_in_progress. The new descriptor_busy counter is only modified by the kernel IO paths. The lock ordering is consistent (big_gpib_mutex -> descriptors_mutex) and the handlers only hold descriptors_mutex briefly during the lookup, so there is no deadlock risk and no impact on IO throughput. | ||||
| CVE-2026-31768 | 1 Linux | 1 Linux Kernel | 2026-05-03 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: iio: adc: ti-adc161s626: use DMA-safe memory for spi_read() Add a DMA-safe buffer and use it for spi_read() instead of a stack memory. All SPI buffers must be DMA-safe. Since we only need up to 3 bytes, we just use a u8[] instead of __be16 and __be32 and change the conversion functions appropriately. | ||||
| CVE-2026-31766 | 1 Linux | 1 Linux Kernel | 2026-05-03 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: validate doorbell_offset in user queue creation amdgpu_userq_get_doorbell_index() passes the user-provided doorbell_offset to amdgpu_doorbell_index_on_bar() without bounds checking. An arbitrarily large doorbell_offset can cause the calculated doorbell index to fall outside the allocated doorbell BO, potentially corrupting kernel doorbell space. Validate that doorbell_offset falls within the doorbell BO before computing the BAR index, using u64 arithmetic to prevent overflow. (cherry picked from commit de1ef4ffd70e1d15f0bf584fd22b1f28cbd5e2ec) | ||||
| CVE-2026-31761 | 1 Linux | 1 Linux Kernel | 2026-05-03 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: iio: gyro: mpu3050: Move iio_device_register() to correct location iio_device_register() should be at the end of the probe function to prevent race conditions. Place iio_device_register() at the end of the probe function and place iio_device_unregister() accordingly. | ||||
| CVE-2026-31758 | 1 Linux | 1 Linux Kernel | 2026-05-03 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: usb: usbtmc: Flush anchored URBs in usbtmc_release When calling usbtmc_release, pending anchored URBs must be flushed or killed to prevent use-after-free errors (e.g. in the HCD giveback path). Call usbtmc_draw_down() to allow anchored URBs to be completed. | ||||
| CVE-2026-31743 | 1 Linux | 1 Linux Kernel | 2026-05-03 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: nvmem: zynqmp_nvmem: Fix buffer size in DMA and memcpy Buffer size used in dma allocation and memcpy is wrong. It can lead to undersized DMA buffer access and possible memory corruption. use correct buffer size in dma_alloc_coherent and memcpy. | ||||
| CVE-2026-31742 | 1 Linux | 1 Linux Kernel | 2026-05-03 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: vt: discard stale unicode buffer on alt screen exit after resize When enter_alt_screen() saves vc_uni_lines into vc_saved_uni_lines and sets vc_uni_lines to NULL, a subsequent console resize via vc_do_resize() skips reallocating the unicode buffer because vc_uni_lines is NULL. However, vc_saved_uni_lines still points to the old buffer allocated for the original dimensions. When leave_alt_screen() later restores vc_saved_uni_lines, the buffer dimensions no longer match vc_rows/vc_cols. Any operation that iterates over the unicode buffer using the current dimensions (e.g. csi_J clearing the screen) will access memory out of bounds, causing a kernel oops: BUG: unable to handle page fault for address: 0x0000002000000020 RIP: 0010:csi_J+0x133/0x2d0 The faulting address 0x0000002000000020 is two adjacent u32 space characters (0x20) interpreted as a pointer, read from the row data area past the end of the 25-entry pointer array in a buffer allocated for 80x25 but accessed with 240x67 dimensions. Fix this by checking whether the console dimensions changed while in the alternate screen. If they did, free the stale saved buffer instead of restoring it. The unicode screen will be lazily rebuilt via vc_uniscr_check() when next needed. | ||||
| CVE-2026-31739 | 1 Linux | 1 Linux Kernel | 2026-05-03 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: crypto: tegra - Add missing CRYPTO_ALG_ASYNC The tegra crypto driver failed to set the CRYPTO_ALG_ASYNC on its asynchronous algorithms, causing the crypto API to select them for users that request only synchronous algorithms. This causes crashes (at least). Fix this by adding the flag like what the other drivers do. Also remove the unnecessary CRYPTO_ALG_TYPE_* flags, since those just get ignored and overridden by the registration function anyway. | ||||
| CVE-2026-31735 | 1 Linux | 1 Linux Kernel | 2026-05-03 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: iommupt: Fix short gather if the unmap goes into a large mapping unmap has the odd behavior that it can unmap more than requested if the ending point lands within the middle of a large or contiguous IOPTE. In this case the gather should flush everything unmapped which can be larger than what was requested to be unmapped. The gather was only flushing the range requested to be unmapped, not extending to the extra range, resulting in a short invalidation if the caller hits this special condition. This was found by the new invalidation/gather test I am adding in preparation for ARMv8. Claude deduced the root cause. As far as I remember nothing relies on unmapping a large entry, so this is likely not a triggerable bug. | ||||
| CVE-2026-31719 | 1 Linux | 1 Linux Kernel | 2026-05-03 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: crypto: krb5enc - fix async decrypt skipping hash verification krb5enc_dispatch_decrypt() sets req->base.complete as the skcipher callback, which is the caller's own completion handler. When the skcipher completes asynchronously, this signals "done" to the caller without executing krb5enc_dispatch_decrypt_hash(), completely bypassing the integrity verification (hash check). Compare with the encrypt path which correctly uses krb5enc_encrypt_done as an intermediate callback to chain into the hash computation on async completion. Fix by adding krb5enc_decrypt_done as an intermediate callback that chains into krb5enc_dispatch_decrypt_hash() upon async skcipher completion, matching the encrypt path's callback pattern. Also fix EBUSY/EINPROGRESS handling throughout: remove krb5enc_request_complete() which incorrectly swallowed EINPROGRESS notifications that must be passed up to callers waiting on backlogged requests, and add missing EBUSY checks in krb5enc_encrypt_ahash_done for the dispatch_encrypt return value. Unset MAY_BACKLOG on the async completion path so the user won't see back-to-back EINPROGRESS notifications. | ||||
| CVE-2026-31718 | 1 Linux | 1 Linux Kernel | 2026-05-03 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix use-after-free in __ksmbd_close_fd() via durable scavenger When a durable file handle survives session disconnect (TCP close without SMB2_LOGOFF), session_fd_check() sets fp->conn = NULL to preserve the handle for later reconnection. However, it did not clean up the byte-range locks on fp->lock_list. Later, when the durable scavenger thread times out and calls __ksmbd_close_fd(NULL, fp), the lock cleanup loop did: spin_lock(&fp->conn->llist_lock); This caused a slab use-after-free because fp->conn was NULL and the original connection object had already been freed by ksmbd_tcp_disconnect(). The root cause is asymmetric cleanup: lock entries (smb_lock->clist) were left dangling on the freed conn->lock_list while fp->conn was nulled out. To fix this issue properly, we need to handle the lifetime of smb_lock->clist across three paths: - Safely skip clist deletion when list is empty and fp->conn is NULL. - Remove the lock from the old connection's lock_list in session_fd_check() - Re-add the lock to the new connection's lock_list in ksmbd_reopen_durable_fd(). | ||||