Export limit exceeded: 381796 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 381796 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (381796 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-74297 | 1 Linux | 1 Linux Kernel | 2026-08-22 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/mlx5: Fix undefined shift of user RQ WQE size set_rq_size() computes the RQ WQE size as "1 << rq_wqe_shift" based on the user-provided rq_wqe_shift, which is only checked to be greater than 32, so shifts of 32 are still accepted. A shift of 31 also overflows a signed integer, leading to undefined behavior. Use check_shl_overflow() to compute the RQ WQE size and reject any invalid values. | ||||
| CVE-2026-74299 | 1 Linux | 1 Linux Kernel | 2026-08-22 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/core: Fix FRMR aging push to queue error flow Aging pools with pinned handles requires moving handles from the active queue to a non-empty inactive queue that might fail on new page allocation, we are currently not handling the fault and leaking any mkey that fails the push. Fix by Introducing push_queue_to_queue_locked() that fills the destination's partial tail page from the source and then splices the remaining source pages onto the destination, performing no allocation. Replace the per-handle move loop in age_pinned_pool() and the open-coded splice in pool_aging_work() with calls to the helper. As the helper cannot fail under memory pressure, removing a class of GFP_ATOMIC allocations under the pool lock and simplifying the error flow. | ||||
| CVE-2026-74302 | 1 Linux | 1 Linux Kernel | 2026-08-22 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_core: Fix UAF in hci_unregister_dev() hci_unregister_dev() does not disable cmd_timer and ncmd_timer before the hci_dev structure is freed. If a timeout fires during device teardown, the callback dereferences freed memory (including the hdev->reset function pointer), leading to a use-after-free. Add disable_delayed_work_sync() calls alongside the existing disable_work_sync() calls to ensure both timers are fully quiesced before teardown proceeds. | ||||
| CVE-2026-74305 | 1 Linux | 1 Linux Kernel | 2026-08-22 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Tighten cgroup storage cookie checks for prog arrays The fix in commit abad3d0bad72 ("bpf: Fix oob access in cgroup local storage") is still incomplete. The prog-array compatibility check treats a program with no cgroup storage as compatible with any stored storage cookie. This allows a storage-less program to bridge a tail call chain between an entry program and a storage-using callee even though cgroup local storage at runtime still follows the caller's context, that is, A -> B(no storage) -> C(storage) path. Requiring exact cookie equality would break the legitimate case of a storage-less leaf program being tail called from a storage-using one. Instead, only accept a zero storage cookie if the program cannot perform tail calls itself. This keeps A -> B(no storage) working while rejecting the A -> B(no storage) -> C(storage) bridge. | ||||
| CVE-2026-74307 | 1 Linux | 1 Linux Kernel | 2026-08-22 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ext4: validate donor file superblock early in EXT4_IOC_MOVE_EXT Reject the EXT4_IOC_MOVE_EXT ioctl early if the donor file does not belong to the same superblock as the original file. Currently, this validation is performed inside ext4_move_extents() by mext_check_validity(), but only after lock_two_nondirectories() has already acquired the inode locks. When the donor fd refers to a file on a different filesystem (e.g., overlayfs), this late validation creates a circular lock dependency: CPU0 (overlayfs write) CPU1 (ext4 ioctl) ---- ---- inode_lock(ovl_inode) mnt_want_write_file(filp) sb_start_write(ext4_sb) [sb_writers] backing_file_write_iter() vfs_iter_write(real_file) file_start_write(real_file) sb_start_write(ext4_sb) [blocked by freeze] lock_two_nondirectories() inode_lock(ovl_inode) [blocked] With a concurrent freeze operation holding sb_writers write side, this forms a deadlock cycle: CPU0 waits for freeze to complete, freeze waits for CPU1's sb_writers reader to exit, CPU1 waits for CPU0's inode lock. Since EXT4_IOC_MOVE_EXT exchanges physical extents between two files, it fundamentally requires both files to reside on the same ext4 filesystem. Moving the superblock check before any lock acquisition is both semantically correct and eliminates the circular dependency by ensuring that cross-filesystem donor fds are rejected before sb_writers or inode locks are taken. | ||||
| CVE-2026-53541 | 1 Olivetin | 1 Olivetin | 2026-08-22 | 4.3 Medium |
| OliveTin gives access to predefined shell commands from a web interface. The `filterToDefinedArgumentsOnly` function in the executor is intended to discard any arguments not explicitly defined in the action's configuration. However, prior to commit ebffd9f040f791208aee1db2e5a8aecd1e3e603d, a special case allows any argument whose name starts with `ot_` to bypass this filter. While two system arguments (`ot_executionTrackingId` and `ot_username`) are injected by OliveTin and overridden, all other `ot_`-prefixed arguments supplied by the user pass through unmodified. These bypassed arguments are not type-checked — the validation loop only iterates over the action's defined arguments, so `ot_`-prefixed arguments skip all type safety checks entirely; set as environment variables — via `buildEnv()`, with completely unvalidated values, and passed to the executed command; and included in the template context — available as `.Arguments.ot_*` in template rendering. Commit ebffd9f040f791208aee1db2e5a8aecd1e3e603d contains a patch. | ||||
| CVE-2026-74271 | 1 Linux | 1 Linux Kernel | 2026-08-22 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: power: supply: core: fix supplied_from allocations If dts property power-supplies has multiple values, then accessing to psy->supplied_from[i-1] in __power_supply_populate_supplied_from will overrun supplied_from array. | ||||
| CVE-2026-74306 | 1 Linux | 1 Linux Kernel | 2026-08-22 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: vfio/qat: fix f_pos race in qat_vf_resume_write() qat_vf_resume_write() checks filp->f_pos before taking migf->lock, but copies into the migration-state buffer after taking the lock and re-reading the shared file position. Two concurrent writers could therefore pass the bounds check with the old offset, then have the second writer copy after the first advanced f_pos, writing past the end of the migration-state buffer. Take migf->lock before doing the boundary checks. | ||||
| CVE-2026-74319 | 1 Linux | 1 Linux Kernel | 2026-08-22 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: zoned: fix deadlock waiting for ticket during data relocation When performing data relocation on a zoned filesystem, BTRFS can deadlock in handle_reserve_tickets(). The relocation process is waiting on a space reservation ticket that can never be fulfilled, because the relocation itself is the operation responsible for freeing up that space. Fix this by introducing a new flush state, BTRFS_RESERVE_FLUSH_ZONED_RELOCATION, specifically for data chunk allocation during zoned relocation. Like BTRFS_RESERVE_FLUSH_FREE_SPACE_INODE, this state uses priority_reclaim_data_space() instead of the normal flushing path, which avoids re-entering the relocation code and breaking the deadlock cycle. In btrfs_alloc_data_chunk_ondemand(), select this new flush state when the inode belongs to a data relocation root on a zoned filesystem. | ||||
| CVE-2026-74339 | 1 Linux | 1 Linux Kernel | 2026-08-22 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: seq: Clear variable event pointer on read snd_seq_read() copies a queued variable-length event header to userspace before expanding the payload. Queued variable-length events use SNDRV_SEQ_EXT_CHAINED internally, and data.ext.ptr points at the first extension cell. The read side strips SNDRV_SEQ_EXT_* bits from data.ext.len before the copy, but it leaves data.ext.ptr untouched. A userspace sequencer client can therefore write a direct variable event to itself and read back the extension-cell kernel address from the returned header. Clear the temporary header pointer before copy_to_user(). The original queued event remains unchanged and is still passed to snd_seq_expand_var_event(), so payload expansion keeps using the internal chain. | ||||
| CVE-2026-74347 | 1 Linux | 1 Linux Kernel | 2026-08-22 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: cttimeout: detach dataplane timeout policy and repurpose refcount Add a refcount for struct nf_ct_timeout which is used by ct extension to set the custom ct timeout policy, this tells us that the ct timeout is being used by a conntrack entry. When the last conntrack entry drops the refcount on the ct timeout, the ct timeout is released. Remove the refcount for control plane which controls if the ruleset refers to the timeout policy. After this update, it is possible to remove the ct timeout policy from nfnetlink_cttimeout immediately. This is for simplicity not to handle two refcounts on a single object. Remove nf_queue_nf_hook_drop(): a packet sitting in nfqueue will just hold a reference to the nf_ct_timeout object until packet is reinjected, since this is part of the ct extension, this will be released by the time the conntrack is freed. nf_ct_untimeout() is still called to clean up in a best effort basis: the ct timeout on existing entries gets removed when the ct timeout goes away, but as long as the iptables ruleset still refers to the ct timeout through a template, new conntracks may keep attaching it and extend its lifetime until the rule is removed. nf_ct_untimeout() is not called anymore from module removal path, this is unlikely to find timeouts give module refcount is bumped, and the new refcount already tracks the ct timeout policy use so it is released when unused. | ||||
| CVE-2026-74351 | 1 Linux | 1 Linux Kernel | 2026-08-22 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ocfs2: rebase copied fsdlm LVB pointers in locking_state The locking_state debugfs iterator snapshots struct ocfs2_lock_res by value under ocfs2_dlm_tracking_lock and later formats that copy in ocfs2_dlm_seq_show(). That is fine for the inline fields, but the userspace fsdlm stack stores the LVB through lksb_fsdlm.sb_lvbptr. Once the iterator drops the tracking lock, a copied non-NULL sb_lvbptr still points into the original lockres owner, so teardown can free that container before the debugfs dump walks the raw LVB bytes. Rebase the copied sb_lvbptr to the copied l_lksb before dumping the raw LVB. The seq snapshot already carries the inline LVB storage reserved in struct ocfs2_dlm_lksb, so the debugfs reader can dump the copied bytes without borrowing the original lockres lifetime. The buggy scenario involves two paths, with each column showing the order within that path: locking_state reader: lockres teardown: 1. ocfs2_dlm_seq_start()/next() 1. file release or another owner copies struct ocfs2_lock_res teardown reaches 2. ocfs2_dlm_seq_show() formats ocfs2_lock_res_free() the copied row 2. the lockres is removed from the 3. ocfs2_dlm_lvb() follows the tracking list copied sb_lvbptr 3. the owner frees the original lockres container Validation reproduced this kernel report: KASAN slab-use-after-free in ocfs2_dlm_seq_show+0x1bd/0x430 RIP: 0033:0x7f8ec4b1e29d The buggy address belongs to the object at ffff88810a1e0800 which belongs to the cache kmalloc-1k of size 1024 The buggy address is located 368 bytes inside of freed 1024-byte region [ffff88810a1e0800, ffff88810a1e0c00) Read of size 1 Call trace: dump_stack_lvl+0x66/0xa0 print_report+0xce/0x630 ocfs2_dlm_seq_show+0x1bd/0x430 (fs/ocfs2/dlmglue.c:3137) srso_alias_return_thunk+0x5/0xfbef5 __virt_addr_valid+0x19f/0x330 kasan_report+0xe0/0x110 seq_read_iter+0x29d/0x790 seq_read+0x20a/0x280 find_held_lock+0x2b/0x80 rcu_read_unlock+0x18/0x70 full_proxy_read+0x9e/0xd0 vfs_read+0x12c/0x590 ksys_read+0xd2/0x170 do_user_addr_fault+0x65a/0x890 do_syscall_64+0x115/0x6a0 (arch/x86/entry/syscall_64.c:87) entry_SYSCALL_64_after_hwframe+0x77/0x7f Allocated by task stack: kasan_save_stack+0x33/0x60 kasan_save_track+0x14/0x30 __kasan_kmalloc+0xaa/0xb0 ocfs2_file_open+0x13e/0x300 do_dentry_open+0x233/0x7f0 vfs_open+0x5a/0x1b0 path_openat+0x66d/0x1540 do_file_open+0x186/0x2b0 do_sys_openat2+0xce/0x150 __x64_sys_openat+0xd0/0x140 do_syscall_64+0x115/0x6a0 (arch/x86/entry/syscall_64.c:87) entry_SYSCALL_64_after_hwframe+0x77/0x7f Freed by task stack: kasan_save_stack+0x33/0x60 kasan_save_track+0x14/0x30 kasan_save_free_info+0x3b/0x60 __kasan_slab_free+0x5f/0x80 kfree+0x313/0x590 ocfs2_file_release+0x138/0x260 __fput+0x1df/0x4b0 fput_close_sync+0xd2/0x170 __x64_sys_close+0x55/0x90 do_syscall_64+0x115/0x6a0 (arch/x86/entry/syscall_64.c:87) entry_SYSCALL_64_after_hwframe+0x77/0x7f | ||||
| CVE-2026-74292 | 1 Linux | 1 Linux Kernel | 2026-08-22 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: ASoC: tegra: tegra210_ahub: Validate written enum value tegra_ahub_put_value_enum() reads e->values[item[0]] before checking whether item[0] is within the enum item range. The existing check therefore happens too late to prevent an out-of-range read of the values array. Move the check before the array access. | ||||
| CVE-2026-74309 | 1 Linux | 1 Linux Kernel | 2026-08-22 | 10 Critical |
| In the Linux kernel, the following vulnerability has been resolved: vdpa/octeon_ep: fix IRQ-to-ring mapping in interrupt handler Look up the IRQ index in oct_hw->irqs instead of assuming irq - irqs[0]. This supports non-contiguous IRQ numbers and avoids incorrect ring indexing when irqs[0] is not the base. | ||||
| CVE-2026-74312 | 1 Linux | 1 Linux Kernel | 2026-08-22 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: vhost/vdpa: validate virtqueue index in mmap and fault paths vhost_vdpa_mmap() and vhost_vdpa_fault() use vma->vm_pgoff as a virtqueue index for get_vq_notification(), but they do not validate that the index is smaller than v->nvqs. The ioctl path already performs both a bounds check and array_index_nospec(), but the mmap/fault path only checks that the index fits in u16. This allows an out-of-range queue index to reach driver-specific get_vq_notification() callbacks. Fix this by extracting a unified vhost_vdpa_get_vq_notification() helper that validates the queue index against v->nvqs and applies array_index_nospec() before calling the driver callback. Both the mmap and fault paths use this helper, and the bounds checking is consolidated into a single location. From source inspection, the most defensible impact is out-of-bounds access in the callback path, potentially leading to invalid PFN remaps and crash/DoS. | ||||
| CVE-2026-74313 | 1 Linux | 1 Linux Kernel | 2026-08-22 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: vduse: hold vduse_lock across IDR lookup in open path vduse_dev_open() looks up struct vduse_dev through the IDR and then acquires dev->lock only after vduse_lock has been dropped. This leaves a window where a concurrent VDUSE_DESTROY_DEV can remove the same object from the IDR and free it before the open path locks the device, leading to a use-after-free. Close this race by keeping vduse_lock held until dev->lock has been acquired in the open path, matching the lock ordering already used by the destroy path. | ||||
| CVE-2026-74314 | 1 Linux | 1 Linux Kernel | 2026-08-22 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Cancel special fields on map value recycle Map update and delete paths currently call bpf_obj_free_fields() when a value is being replaced or recycled. That makes field destruction depend on the context of the update/delete operation. For tracing programs this can include NMI context, where referenced kptr destructors, uptr unpinning, and graph root destruction are not generally safe. Introduce bpf_obj_cancel_fields() for the reusable-value path. It only performs NMI-safe cleanup for timer, workqueue, and task_work fields. Fields that need full destruction are left attached to the recycled value and are destroyed by the final cleanup path instead. Switch array and hashtab update/delete/recycle paths to this cancel helper. Keep bpf_obj_free_fields() for final map destruction and for bpf_mem_alloc destructors. Preallocated hashtabs do not have allocator destructors, so teardown continues to walk the normal and extra elements and fully destroy their fields. This deliberately relaxes the eager-free semantics of map update/delete for special fields. Programs that relied on a recycled map slot becoming empty immediately after update/delete were relying on behavior that cannot be implemented safely from every BPF execution context without offloading arbitrary destructors. There is a chance this change breaks programs making assumptions regarding the eager freeing of fields. If so, we can relax semantics to cancellation only when irqs_disabled() is true in the future. However, theoretically, map values that get reused eagerly already have weaker guarantees as parallel users can recreate freed fields before the new element becomes visible again. | ||||
| CVE-2026-74316 | 1 Linux | 1 Linux Kernel | 2026-08-22 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: NFSD: Handle layout stid in nfsd4_drop_revoked_stid() nfsd4_drop_revoked_stid() has no SC_TYPE_LAYOUT case, so when a client sends FREE_STATEID for an admin-revoked layout stid, the default branch releases cl_lock and returns without unhashing or releasing the stid. The stid remains in the IDR and on the per-client list until the client is destroyed. Remove the layout stid from the per-client list and call nfs4_put_stid() to drop the creation reference. When the refcount reaches zero, nfsd4_free_layout_stateid() handles the remaining cleanup: cancelling the fence worker, removing from the per-file list, and freeing the slab object. | ||||
| CVE-2026-74318 | 1 Linux | 1 Linux Kernel | 2026-08-22 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: fix deadlock cloning inline extent when using flushoncommit In commit b48c980b6a7e ("btrfs: fix deadlock between reflink and transaction commit when using flushoncommit") a deadlock was fixed between reflinks and transaction commits when the fs is mounted with the flushoncommit option. This happened when we had to copy an inline extent's data to the destination file. However the issue was fixed only for the case where the destination offset is 0, it missed the case when the offset is greater than zero. Fix this by ensuring we get i_size update whenever we copied an inline extent's data into the destination file. Syzbot reported this with the following trace: INFO: task kworker/u8:3:57 blocked for more than 143 seconds. Not tainted syzkaller #0 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. task:kworker/u8:3 state:D stack:21600 pid:57 tgid:57 ppid:2 task_flags:0x4208160 flags:0x00080000 Workqueue: writeback wb_workfn (flush-btrfs-129) Call Trace: <TASK> context_switch kernel/sched/core.c:5402 [inline] __schedule+0x16f9/0x5500 kernel/sched/core.c:7204 __schedule_loop kernel/sched/core.c:7283 [inline] schedule+0x164/0x360 kernel/sched/core.c:7298 wait_extent_bit fs/btrfs/extent-io-tree.c:905 [inline] btrfs_lock_extent_bits+0x59c/0x700 fs/btrfs/extent-io-tree.c:2008 btrfs_lock_extent fs/btrfs/extent-io-tree.h:152 [inline] btrfs_invalidate_folio+0x440/0xc00 fs/btrfs/inode.c:7718 extent_writepage fs/btrfs/extent_io.c:1848 [inline] extent_write_cache_pages fs/btrfs/extent_io.c:2552 [inline] btrfs_writepages+0x12f3/0x2410 fs/btrfs/extent_io.c:2684 do_writepages+0x32e/0x550 mm/page-writeback.c:2571 __writeback_single_inode+0x133/0x10e0 fs/fs-writeback.c:1764 writeback_sb_inodes+0x97f/0x1980 fs/fs-writeback.c:2056 wb_writeback+0x445/0xb00 fs/fs-writeback.c:2241 wb_do_writeback fs/fs-writeback.c:2388 [inline] wb_workfn+0x3fd/0xf20 fs/fs-writeback.c:2428 process_one_work+0x98b/0x1630 kernel/workqueue.c:3318 process_scheduled_works kernel/workqueue.c:3401 [inline] worker_thread+0xb49/0x1140 kernel/workqueue.c:3482 kthread+0x388/0x470 kernel/kthread.c:436 ret_from_fork+0x514/0xb70 arch/x86/kernel/process.c:158 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:245 </TASK> INFO: task syz.0.145:8523 blocked for more than 143 seconds. Not tainted syzkaller #0 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. task:syz.0.145 state:D stack:22752 pid:8523 tgid:8522 ppid:5850 task_flags:0x400140 flags:0x00080002 Call Trace: <TASK> context_switch kernel/sched/core.c:5402 [inline] __schedule+0x16f9/0x5500 kernel/sched/core.c:7204 __schedule_loop kernel/sched/core.c:7283 [inline] schedule+0x164/0x360 kernel/sched/core.c:7298 wb_wait_for_completion+0x3e8/0x790 fs/fs-writeback.c:227 __writeback_inodes_sb_nr+0x24c/0x2d0 fs/fs-writeback.c:2847 try_to_writeback_inodes_sb+0x9a/0xc0 fs/fs-writeback.c:2895 btrfs_start_delalloc_flush fs/btrfs/transaction.c:2182 [inline] btrfs_commit_transaction+0x813/0x2fc0 fs/btrfs/transaction.c:2371 btrfs_sync_file+0xdf4/0x1230 fs/btrfs/file.c:1822 generic_write_sync include/linux/fs.h:2663 [inline] btrfs_do_write_iter+0x6a9/0x840 fs/btrfs/file.c:1473 new_sync_write fs/read_write.c:595 [inline] vfs_write+0x629/0xba0 fs/read_write.c:688 ksys_write+0x156/0x270 fs/read_write.c:740 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0x15f/0x560 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f5a0bdece59 RSP: 002b:00007f5a0b446028 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 00007f5a0c065fa0 RCX: 00007f5a0bdece59 RDX: 000000000000029f RSI: 0000200000 ---truncated--- | ||||
| CVE-2026-74326 | 1 Linux | 1 Linux Kernel | 2026-08-22 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7921: fix resource leak in probe error path When pcim_iomap_region() or devm_kmemdup() fail, the code returns directly without cleaning up previously allocated resources: - mt76_device allocated by mt76_alloc_device() - pci irq vectors allocated by pci_alloc_irq_vectors() Fix this by jumping to the existing error cleanup path instead of returning directly. | ||||