Export limit exceeded: 381579 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (381579 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-74521 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 9.1 Critical |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: use memcmp() to compare ClientGUIDs ClientGUID is a fixed-size binary value and can contain embedded NUL bytes. strncmp() stops comparing at the first NUL byte, so different ClientGUID values can incorrectly be treated as equal. Use memcmp() in SMB3 multichannel session binding and FSCTL_VALIDATE_NEGOTIATE_INFO to compare all SMB2_CLIENT_GUID_SIZE bytes. | ||||
| CVE-2026-74545 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: rtase: fix double free of multi-frag skb on DMA map failure In rtase_start_xmit(), when the head buffer DMA mapping fails after rtase_xmit_frags() has mapped all fragments, the error path clears the fragment descriptors with rtase_tx_clear_range(), which frees the skb through the last-frag slot and accounts tx_dropped. Control then falls through to the common error label, which frees the same skb a second time and counts it again. Return right after clearing the fragments when the skb owns frags; the no-frag case still drops through and frees the head skb once. | ||||
| CVE-2026-65673 | 1 Microsoft | 2 Entra Connect, Microsoft Entra Connect | 2026-08-17 | 7.8 High |
| Improper neutralization of special elements used in an sql command ('sql injection') in Microsoft Entra Connect Sync allows an authorized attacker to elevate privileges locally. | ||||
| CVE-2026-66838 | 1 Elixir-ecto | 1 Postgrex | 2026-08-17 | 8.2 High |
| Improper Neutralization of Special Elements used in an SQL Command ('SQL Injection') vulnerability in elixir-ecto postgrex allows SQL Injection via the :comment option of Postgrex.stream/4. An attacker who can influence that value can close the comment delimiter with */ and extend the streamed statement with their own clauses, which execute under the connection's role. Ecto exposes the same option through Ecto.Repo.stream/2. Postgrex appends the comment by concatenating it into the statement text sent in the Parse message, without escaping or rejecting */. The option is validated by comment_not_present!/1 at every other execution point; stream/4 never calls it. Because Parse accepts a single command, the injection is confined to the streamed statement and further statements cannot be chained. This issue affects postgrex: from 0.19.3 before 0.22.4. | ||||
| CVE-2026-17095 | 1 Ibm | 1 I | 2026-08-17 | 8.3 High |
| IBM i 7.6, 7.5, 7.4, and 7.3 could allow a remote authenticated attacker to bypass security restrictions due to unsafe reflection. | ||||
| CVE-2026-18144 | 1 Ibm | 1 I | 2026-08-17 | 4.3 Medium |
| IBM i 7.6, 7.5, 7.4, and 7.3 could allow a remote authenticated attacker to bypass security restrictions due to improper authorization. | ||||
| CVE-2026-46939 | 1 Oracle | 2 Configure To Order, E-business Suite | 2026-08-17 | 8.1 High |
| Vulnerability in the Oracle Configure to Order product of Oracle E-Business Suite (component: Supply to Order Workbench). Supported versions that are affected are 12.2.3-12.2.15. Easily exploitable vulnerability allows low privileged attacker with network access via HTTP to compromise Oracle Configure to Order. Successful attacks of this vulnerability can result in unauthorized creation, deletion or modification access to critical data or all Oracle Configure to Order accessible data as well as unauthorized access to critical data or complete access to all Oracle Configure to Order accessible data. CVSS 3.1 Base Score 8.1 (Confidentiality and Integrity impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:N). | ||||
| CVE-2026-18683 | 1 Ibm | 1 I | 2026-08-17 | 8.8 High |
| IBM i 7.6, 7.5, 7.4, and 7.3 is vulnerable to privilege escalation via Navigator for i. An authenticated user could elevate privileges to a root user to execute commands. | ||||
| CVE-2026-61125 | 1 Oracle | 2 Configure To Order, E-business Suite | 2026-08-17 | 7.7 High |
| Vulnerability in the Oracle Configure to Order product of Oracle E-Business Suite (component: Supply to Order Workbench). Supported versions that are affected are 12.2.3-12.2.15. Easily exploitable vulnerability allows low privileged attacker with network access via HTTP to compromise Oracle Configure to Order. While the vulnerability is in Oracle Configure to Order, attacks may significantly impact additional products (scope change). Successful attacks of this vulnerability can result in unauthorized access to critical data or complete access to all Oracle Configure to Order accessible data. CVSS 3.1 Base Score 7.7 (Confidentiality impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:C/C:H/I:N/A:N). | ||||
| CVE-2026-17082 | 1 Ibm | 1 I | 2026-08-17 | 8.8 High |
| IBM i 7.6, 7.5, 7.4, and 7.3 could allow a remote authenticated attacker to gain elevated privileges due to improper validation of a client-supplied profile name. | ||||
| CVE-2026-74377 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/rxe: Copy WQE to local buffer in non-SRQ receive path For non-SRQ QPs, the responder reads WQE fields directly from the shared queue buffer mapped into userspace. This allows a malicious user to modify fields like num_sge or sge entries while the kernel is processing the WQE, leading to out-of-bounds reads in rxe_resp_check_length() and copy_data(). Introduce get_recv_wqe() that validates num_sge and copies the WQE to a kernel-local buffer before processing, matching the approach already used for SRQ WQEs in get_srq_wqe(). The srq_wqe buffer is reused since SRQ and non-SRQ paths are mutually exclusive per QP. | ||||
| CVE-2026-74387 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: seq: midi: Serialize output teardown with event_input event_process_midi() borrows msynth->output_rfile.output and then passes the substream to dump_midi() and snd_rawmidi_kernel_write() without synchronizing with the output open/close transition. midisynth_use() also publishes output_rfile before snd_rawmidi_output_params() has finished. The last midisynth_unuse() can therefore release the same rawmidi file and free substream->runtime before snd_rawmidi_kernel_write1() takes its runtime buffer reference. That leaves the event_input path using a stale substream or runtime and can end in a NULL-deref or use-after-free. Fix this with two pieces of synchronization. Keep a short IRQ-safe spinlock only for publishing or clearing output_rfile and for pairing the output snapshot with an snd_use_lock_t reference. Once event_process_midi() has taken that in-flight reference, it drops the spinlock before calling snd_seq_dump_var_event(), dump_midi(), or snd_rawmidi_kernel_write(). midisynth_unuse() now detaches the visible rawmidi file under the same spinlock, waits for the in-flight writers to drain, and only then drains and releases the saved file. midisynth_use() likewise opens into a local snd_rawmidi_file and publishes it only after snd_rawmidi_output_params() succeeds. The buggy scenario involves two paths, with each column showing the order within that path: event_input path: last unuse path: 1. event_process_midi() snapshots 1. midisynth_unuse() starts output_rfile.output. tearing down output_rfile. 2. dump_midi() reaches 2. snd_rawmidi_kernel_release() snd_rawmidi_kernel_write() closes the output file. before runtime is pinned. 3. close_substream() frees 3. The callback keeps using substream->runtime. the borrowed substream. Validation reproduced this kernel report: KASAN null-ptr-deref in snd_rawmidi_kernel_write1+0x56/0x360 RIP: 0033:0x7fde7dd0837f RIP: 0010:snd_rawmidi_kernel_write1+0x56/0x360 | ||||
| CVE-2026-74435 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: rxrpc: rxrpc_verify_data ensure rx_dec_buffer alloc rxrpc_recvmsg_data() calls rxrpc_verify_data() whenever the rxrpc_call.rx_dec_buffer is unallocated and assumes that upon successful return that rx_dec_buffer must be allocated. However, rxrpc_verify_data() does not request an allocation if the rxrpc_skb_priv.len is zero. In addition, failure to allocate rx_dec_buffer will result in a call to skb_copy_bits() with a NULL destination which can trigger a NULL pointer dereference. To prevent these issues rxrpc_verify_data() is modified to always attempt to allocate the rxrpc_call.rx_dec_buffer if it is NULL. This issue was identified with assistance of a private sashiko instance. | ||||
| CVE-2026-74530 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_sync: hold conn in hci_connect_big_sync() callback There is theoretical UAF if the conn is freed while the hci_sync task is running. Hold refcount to avoid that. Handle NULL hcon, return 0 + do nothing to match the previous behavior. | ||||
| CVE-2026-74531 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_conn: hold conn reference in abort_conn_sync() There is theoretical UAF if the conn is freed while the hci_sync task is running. Hold refcount to avoid that. | ||||
| CVE-2026-74538 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: ISO: lock sk in iso_connect_ind Accessing iso_pi(sk)->conn requires lock_sock, which is not taken in the "ev3" part of iso_connect_ind. It may also be NULL if socket has transitioned away from the LISTEN/CONNECT states before locking. Fix by adding lock/release. Recheck hcon is valid after lock acquire where needed. | ||||
| CVE-2026-74565 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_tables: make nft_object rhltable per table The nft_object rhltable is global, this allows for accessing objects that are being dismangled from lookup path by other existing netns. Given the nft_obj_destroy() releases the object inmediately, this might lead to use-after-free of these objects that are being released. Make the existing rhltable per table to address this issue to deal with with the nft_rcv_nl_event() path too. Update nft_obj_lookup() to take the table as non-const, otherwise, compiler complains when passing the objname_ht to rhltable_lookup(). | ||||
| CVE-2026-16694 | 1 Ibm | 1 I | 2026-08-17 | 6.4 Medium |
| IBM i 7.6, 7.5, 7.4, and 7.3 is vulnerable to stored cross-site scripting. This vulnerability allows an authenticated user to embed arbitrary JavaScript code in the Web UI thus altering the intended functionality potentially leading to credentials disclosure within a trusted session. | ||||
| CVE-2026-61200 | 1 Oracle | 2 E-business Suite, Labor Distribution | 2026-08-17 | 5.4 Medium |
| Vulnerability in the Oracle Labor Distribution product of Oracle E-Business Suite (component: Internal Operations). Supported versions that are affected are 12.2.3-12.2.15. Easily exploitable vulnerability allows low privileged attacker with network access via HTTP to compromise Oracle Labor Distribution. Successful attacks of this vulnerability can result in unauthorized update, insert or delete access to some of Oracle Labor Distribution accessible data as well as unauthorized read access to a subset of Oracle Labor Distribution accessible data. CVSS 3.1 Base Score 5.4 (Confidentiality and Integrity impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:L/I:L/A:N). | ||||
| CVE-2026-49163 | 1 Microsoft | 1 Application Insights Profiler | 2026-08-17 | 8.8 High |
| Improper limitation of a pathname to a restricted directory ('path traversal') in Application Insights Profiler allows an authorized attacker to elevate privileges over a network. | ||||