Export limit exceeded: 381585 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (381585 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-12004 | 1 Ibm | 4 Security Verify Access, Security Verify Access Container, Verify Identity Access and 1 more | 2026-08-17 | 8.7 High |
| IBM Security Verify Access 10.0 through 10.0.9.2 and IBM Verify Identity Access 11.0 through 11.0.3 and IBM Verify Identity Access Container 11.0 through 11.0.3 contains a format string injection vulnerability in the management interface that allows attackers to cause denial of service and information disclosure by crafting a malicious HTTP request. | ||||
| CVE-2026-11937 | 1 Ibm | 4 Security Verify Access, Security Verify Access Container, Verify Identity Access and 1 more | 2026-08-17 | 3.1 Low |
| IBM Security Verify Access 10.0 through 10.0.9.2 and IBM Verify Identity Access 11.0 through 11.0.3 and IBM Verify Identity Access Container 11.0 through 11.0.3 and IBM Security Verify Access Container 10.0 through 10.0.9.2 Reverse Proxy in certain configurations is vulnerable to a denial of service attack. | ||||
| CVE-2026-10673 | 1 Zephyrproject | 1 Zephyr | 2026-08-17 | 8.3 High |
| The Zephyr ADIN2111/ADIN1110 10BASE-T1S/T1L Ethernet driver (drivers/ethernet/eth_adin2111.c) reassembles received Ethernet frames in OPEN Alliance (OA) SPI mode by copying device-supplied 64-byte data chunks into a fixed static buffer ctx->buf of size CONFIG_ETH_ADIN2111_BUFFER_SIZE (default 1524 bytes). In eth_adin2111_oa_data_read(), each valid chunk was memcpy'd into ctx->buf[ctx->scur] and the write cursor scur advanced, with no check that scur + len stayed within the buffer. The number of chunks (up to 255, from the BUFSTS RCA field) and the per-chunk length are taken entirely from the frame data received off the wire; the cursor is only reset on a start-of-frame chunk. An attacker on the single-pair Ethernet segment can therefore send a frame whose reassembled size exceeds the configured buffer, causing the driver's RX offload thread to write attacker-controlled frame bytes past the end of the static buffer into adjacent driver/kernel memory (up to roughly 14.8 KB in the worst case). This is a remotely/adjacently reachable out-of-bounds write (CWE-787) that can corrupt memory and cause denial of service or potentially code execution. The defect was introduced when OA SPI support was added (commit 0ca8b0756b1) and shipped in releases v3.7.0 through v4.4.0. The fix adds a bounds check that drops the oversized frame and resets the cursor before the copy. | ||||
| CVE-2026-53410 | 2 Zoom, Zoom Communications | 5 Remote Control For Zoom Contact Center, Rooms, Workplace Desktop and 2 more | 2026-08-17 | 7 High |
| A time-of-check to time-of-use (TOCTOU) race condition in the installation and uninstallation process of certain Zoom Clients for Windows could allow an authenticated local user to escalate privileges. | ||||
| CVE-2026-72350 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: xt_u32: reject invalid shift counts u32_match_it() executes rule-supplied shift operands on a 32-bit value. A malformed u32 rule can provide a shift count of 32 or more, triggering an undefined shift out-of-bounds during packet evaluation. Validate XT_U32_LEFTSH and XT_U32_RIGHTSH operands in u32_mt_checkentry() and reject malformed rules before they reach the packet path. | ||||
| CVE-2026-72425 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: ice: fix FDIR CTRL VSI resource leak in ice_reset_all_vfs() Resetting all VFs causes resource leak on VFs with FDIR filters enabled as CTRL VSIs are only invalidated and not freed. Fix by using ice_vf_ctrl_vsi_release() instead of ice_vf_ctrl_invalidate_vsi() which aligns behavior with the ice_reset_vf() function. Reproduction: echo 1 > /sys/class/net/$pf/device/sriov_numvfs ethtool -N $vf flow-type ether proto 0x9000 action 0 echo 1 > /sys/class/net/$pf/device/reset | ||||
| CVE-2026-64868 | 1 Quantumnous | 1 New-api | 2026-08-17 | 7.5 High |
| New API is a large language mode (LLM) gateway and artificial intelligence (AI) asset management system. Prior to 1.0.0-rc.11, POST /api/stripe/webhook, POST /api/creem/webhook, and POST /api/waffo/webhook read and log full request bodies before signature validation in router/api-router.go and the payment controllers, allowing an unauthenticated attacker to cause memory pressure, container restarts, or disk exhaustion without forging a successful payment. This issue is fixed in version 1.0.0-rc.11. | ||||
| CVE-2026-61666 | 1 Faye | 1 Websocket-driver-ruby | 2026-08-17 | N/A |
| websocket-driver is a WebSocket protocol handler with pluggable I/O. Prior to 0.8.2, WebSocket::Driver.server() passes a malformed Host header to URI.parse in lib/websocket/http/request.rb without catching URI::InvalidURIError, allowing a remote client to crash a TCP-backed WebSocket server when the application does not catch the error from parse(). This issue is fixed in version 0.8.2. | ||||
| CVE-2026-12629 | 1 Zephyrproject | 1 Zephyr | 2026-08-17 | 4.6 Medium |
| The ARM PL011 UART driver in drivers/serial/uart_pl011.c fails to acknowledge receive error interrupts. On the PL011, the framing, parity, break, and overrun error interrupts (PL011_IMSC_ERROR_MASK) are cleared only by writing the interrupt-clear register UARTICR; reading the data register clears the RX interrupt and the per-byte RSR status but not the error interrupt status in MIS. The interrupt service routine pl011_isr() acknowledged only the CTS modem-status interrupt and never wrote icr for the error bits, so an asserted error interrupt remains pending after the ISR returns. When an application enables error-interrupt reporting via the public uart_irq_err_enable() API, an attacker who controls the serial peer can deterministically assert these error bits by injecting line errors on the RX line — a baud/stop-bit mismatch or mid-character break (framing/break error), a flipped parity bit (parity error), or FIFO flooding (overrun error). Because the error interrupt is never cleared, the interrupt line stays asserted and the CPU re-enters pl011_isr() immediately and indefinitely, producing an interrupt-storm livelock from which the core makes no forward progress. The impact is an availability-only denial of service (permanent hang), reachable from an external or removable UART peer. Exploitation is gated by configuration: the error interrupt is off by default and no in-tree subsystem enables it, so only applications that explicitly call uart_irq_err_enable() on a PL011-based, interrupt-driven port are affected. The fix makes pl011_isr() acknowledge the pending error bits via uart->icr, breaking the loop, and additionally clears the latched RSR status in pl011_err_check(). | ||||
| CVE-2026-65942 | 1 Apache | 1 Ranger | 2026-08-17 | 7.5 High |
| TLS hostname verification issue in Apache Ranger Client Code in versions <= 2.8.0. Users are recommended to upgrade to version 2.9.0, which fixes this issue. | ||||
| CVE-2026-17616 | 1 Ibm | 4 Security Verify Access, Security Verify Access Container, Verify Identity Access and 1 more | 2026-08-17 | 6.8 Medium |
| IBM Security Verify Access 10.0 through 10.0.9.2 and IBM Verify Identity Access 11.0 through 11.0.3 and IBM Verify Identity Access Container 11.0 through 11.0.3 Reverse Proxy in certain configurations may provide weaker than expected cryptographic validation of user supplied data. | ||||
| CVE-2026-64148 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: pds_core: fix error handling in pdsc_devcmd_wait Fix two cases where pdsc_devcmd_wait() returns stale success from the completion register instead of an error: 1. FW crash: If firmware stops running, the wait loop breaks early with running=false. The condition "if ((!done || timeout) && running)" is false, so error handling is bypassed and stale status is returned. Check !running first and return -ENXIO. 2. Timeout: If a command times out, err is set to -ETIMEDOUT but then overwritten by pdsc_err_to_errno(status) which reads stale status. Return -ETIMEDOUT immediately after cleaning up. Both errors now propagate to pdsc_devcmd_locked() which queues health_work for recovery. | ||||
| CVE-2019-10869 | 1 Ninjaforms | 1 Ninja Forms File Uploads | 2026-08-17 | 8.1 High |
| Path Traversal and Unrestricted File Upload exists in the Ninja Forms plugin before 3.0.23 for WordPress (when the Uploads add-on is activated). This allows an attacker to traverse the file system to access files and execute code via the includes/fields/upload.php (aka upload/submit page) name and tmp_name parameters. | ||||
| CVE-2026-64149 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: dma-mapping: move dma_map_resource() sanity check into debug code dma_map_resource() uses pfn_valid() to ensure the range is not RAM. However, pfn_valid() only checks for availability of the memory map for a PFN but it does not ensure that the PFN is actually backed by RAM. On ARM64 with SPARSEMEM (128MB section granularity), MMIO addresses that share a section with RAM will falsely trigger the WARN_ON_ONCE and cause dma_map_resource() to return DMA_MAPPING_ERROR. This causes a WARNING on Raspberry Pi 4 during spi_bcm2835 probe because the SPI FIFO register (0xfe204004) falls in the same sparsemem section as the end of RAM (0xf8000000-0xfbffffff), both in section 31 (0xf8000000-0xffffffff). Move the sanity check from dma_map_resource() into debug_dma_map_phys() and replace the unreliable pfn_valid() with pfn_valid() && !PageReserved(), which correctly identifies actual usable RAM without false positives for MMIO regions that happen to have struct pages. Since dma_map_resource() is dma_map_phys(DMA_ATTR_MMIO), the check applies equally to both APIs. Any non-reserved page represents kernel memory to a sufficient degree that using DMA_ATTR_MMIO on it is almost certainly wrong and risks breaking coherency on non-coherent platforms. ZONE_DEVICE pages used for PCI P2P DMA (MEMORY_DEVICE_PCI_P2PDMA) have PageReserved set, so they will not trigger a false positive. The check no longer blocks the mapping and uses err_printk() to integrate with dma-debug filtering. | ||||
| CVE-2026-73646 | 1 Postcss | 1 Postcss | 2026-08-17 | 7.5 High |
| PostCSS takes a CSS file and provides an API to analyze and modify its rules by transforming the rules into an Abstract Syntax Tree. Prior to 8.5.18, lib/previous-map.js loadMap() passes attacker-controlled sourceMappingURL values to join(dirname(opts.from), annotation), and loadFile() permits traversed or absolute .map paths, allowing untrusted CSS processed without map: false to disclose sourcesContent from arbitrary reachable .map files through result.map. This issue is fixed in version 8.5.18. | ||||
| CVE-2026-72888 | 1 Vurtdev | 1 Net-oauth | 2026-08-17 | 6.5 Medium |
| Net::OAuth versions before 0.32 for Perl allow memory exhaustion via unbounded caching of failed module loads in smart_require. smart_require stores results in a process-global hash with no bound and no eviction, and keeps an entry for every class name it is asked about, including names that failed to load, because the return value of the failed eval is stored before the error is checked. The key comes off the wire on the server side: _signature_method_class builds the class name from the signature_method parameter of the incoming message, and verify resolves it before any signature is checked. A remote client chooses both how many entries are created and how long each key is. In a persistent server the hash grows for the life of the worker process until it exhausts memory. Header size limits bound the key length on the Authorization header path, but not on a POST body. | ||||
| CVE-2026-72887 | 1 Vurtdev | 1 Net-oauth | 2026-08-17 | 9.8 Critical |
| Net::OAuth::Client versions before 0.32 for Perl allow the service provider to silently downgrade OAuth 1.0a to OAuth 1.0 in get_request_token. Passing a callback to the constructor selects OAuth 1.0a. get_request_token then revokes that choice when the request token response omits oauth_callback_confirmed, with no exception, no warning and no option to require 1.0a. The access token request is built from the OAuth 1.0 message class, which has no verifier parameter, so oauth_verifier is dropped from the request even when get_access_token was passed one. oauth_verifier is the binding that OAuth 1.0a added between the authorization step and the token exchange. An application that asked for 1.0a and gets 1.0 is open to OAuth 1.0 session fixation, where an attacker obtains a request token, has the victim authorize it, and then completes the exchange themselves, linking the victim's provider account to a session the attacker controls. No attacker action sets up the downgrade: a provider that does not confirm the callback is enough. | ||||
| CVE-2026-71947 | 2 D-link, Dlink | 2 Dwr-m961, Dwr-m961 | 2026-08-17 | 9.8 Critical |
| D-Link DWR-M961 devices with hardware version C1 and firmware version before 1.1.5_C1_202607071108 contain a command injection vulnerability in the /boafrm/formTracerouteDiagnosticRun interface. A remote attacker can inject arbitrary malicious commands into the host and ipVer fields, resulting in command execution with root privileges. | ||||
| CVE-2026-2497 | 2 Bestwebsoft, Wordpress | 2 Gallery By Bestwebsoft – Customizable Image And Photo Galleries For Wordpress, Wordpress | 2026-08-17 | 7.2 High |
| The Gallery by BestWebSoft plugin for WordPress is vulnerable to SQL Injection via the '_gallery_order_{post_id}' parameter array keys in all versions up to, and including, 4.7.9. This is due to insufficient escaping on the user supplied parameter and lack of sufficient preparation on the existing SQL query. The `gllr_save_postdata()` function stores unsanitized array keys from `$_POST` directly into post meta, which are later used in SQL queries without prepared statements. This makes it possible for authenticated attackers, with Editor-level access and above, to append additional SQL queries into already existing queries that can be used to extract sensitive information from the database. | ||||
| CVE-2026-19956 | 1 Gomarble-ai | 1 Facebook-ads-mcp-server | 2026-08-17 | 6.3 Medium |
| A vulnerability has been found in gomarble-ai facebook-ads-mcp-server 0.1.0. The impacted element is the function fetch_pagination_url of the file server.py. Such manipulation leads to server-side request forgery. The attack can be launched remotely. The name of the patch is 4e53875aa22e8991c2fa4a7660d86e1caba66659. Applying a patch is advised to resolve this issue. | ||||