Export limit exceeded: 421526 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (421526 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-64584 | 1 Linux | 1 Linux Kernel | 2026-08-19 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: usb: gadget: f_midi: cancel pending IN work before freeing the midi object The f_midi driver embeds a work item (midi->work) whose handler, f_midi_in_work(), dereferences the enclosing struct f_midi through container_of(). This work is armed from two sites: f_midi_complete(), on a normal IN-endpoint completion, and f_midi_in_trigger(), on an ALSA rawmidi output-stream start. Neither f_midi_disable() nor f_midi_unbind() cancels midi->work. f_midi_disable() only disables the endpoints and drains the in_req_fifo; it does not synchronize the work item, and the sound card is released asynchronously to the final free of the midi object. The midi object is reference-counted (midi->free_ref) and is freed in f_midi_free() only once both the usb_function reference and the rawmidi private_data reference have been dropped. In f_midi_unbind(), f_midi_disable() runs before the sound card is released, so while the USB endpoints are already disabled the rawmidi device is still usable by an open substream. A concurrent userspace write on such a substream can reach f_midi_in_trigger() and queue midi->work again after f_midi_disable() has returned. A work item armed this way may still be pending when the last reference drops and f_midi_free() proceeds to kfree(midi), letting f_midi_in_work() dereference the struct after it has been freed, a use-after-free. For this reason cancelling midi->work in f_midi_disable() would not be sufficient: the ALSA trigger path can rearm the work after disable() returns. Cancelling at the refcount-zero free site is the boundary after which neither arming source can survive, because by then both references that keep the midi object alive have been dropped: the USB endpoints are already disabled and the rawmidi device has been released. Fix this by calling cancel_work_sync(&midi->work) in the refcount-zero block of f_midi_free(), before the embedded work_struct is freed along with the rest of the structure. opts->lock is a sleeping mutex, so calling cancel_work_sync() under it is permitted, and the handler takes midi->transmit_lock rather than opts->lock, so no self-deadlock can occur while it waits for a running instance of the work to finish. This issue was found by an in-house static analysis tool. | ||||
| CVE-2026-64578 | 1 Linux | 1 Linux Kernel | 2026-08-19 | 8.2 High |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: validate compound request size before reading StructureSize2 When ksmbd validates a compound (chained) SMB2 request, ksmbd_smb2_check_message() reads pdu->StructureSize2 without first checking that the compound element is large enough to contain it. StructureSize2 is a 2-byte field at offset 64 (__SMB2_HEADER_STRUCTURE_SIZE) from the start of each element. The compound-walking logic only guarantees that a full 64-byte SMB2 header is present for the trailing element: when NextCommand is 0, len is reduced to the number of bytes remaining after next_smb2_rcv_hdr_off. A remote client can craft a compound request whose last element has exactly 64 bytes, so the 2-byte StructureSize2 read at offset 64 extends one byte past the receive buffer, producing a slab-out-of-bounds read. BUG: KASAN: slab-out-of-bounds in ksmbd_smb2_check_message (fs/smb/server/smb2misc.c:402) Read of size 2 at addr ffff888012ae31ac by task kworker/0:1/14 The buggy address is located 172 bytes inside of allocated 173-byte region Workqueue: ksmbd-io handle_ksmbd_work Call Trace: ... kasan_report (mm/kasan/report.c:595) ksmbd_smb2_check_message (fs/smb/server/smb2misc.c:402) handle_ksmbd_work (fs/smb/server/server.c:119) process_one_work (kernel/workqueue.c:3314) worker_thread (kernel/workqueue.c:3397) kthread (kernel/kthread.c:436) ret_from_fork (arch/x86/kernel/process.c:158) ret_from_fork_asm (arch/x86/entry/entry_64.S:245) Reject any compound element that is too small to hold StructureSize2 before dereferencing it. | ||||
| CVE-2026-64577 | 1 Linux | 1 Linux Kernel | 2026-08-19 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: gtp: check skb_pull_data() return in gtp1u_send_echo_resp() gtp1u_send_echo_resp() ignores skb_pull_data()'s return value. Its caller gtp1u_udp_encap_recv() only guarantees 16 bytes (udphdr + gtp1_header), but the pull requests 20 (gtp1_header_long + udphdr). For a 16-19 byte echo request the pull fails and returns NULL without advancing skb->data; execution continues, and the following skb_push() plus the IP header pushed by iptunnel_xmit() move skb->data below skb->head, tripping skb_under_panic(). Fix it by dropping the packet when skb_pull_data() fails. skbuff: skb_under_panic: ... kernel BUG at net/core/skbuff.c:214! Call Trace: skb_push (net/core/skbuff.c:2648) iptunnel_xmit (net/ipv4/ip_tunnel_core.c:82) gtp_encap_recv (drivers/net/gtp.c:701 drivers/net/gtp.c:808 drivers/net/gtp.c:920) udp_queue_rcv_one_skb (net/ipv4/udp.c:2388) ... Kernel panic - not syncing: Fatal exception in interrupt | ||||
| CVE-2026-64573 | 1 Linux | 1 Linux Kernel | 2026-08-19 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: qca: fix NVM tag length underflow in TLV parser In the TLV_TYPE_NVM branch of qca_tlv_check_data() the tag loop bound is "while (idx < length - sizeof(struct tlv_type_nvm))". "length" is a signed int from the firmware TLV header and sizeof(struct tlv_type_nvm) is a size_t (12), so "length" is converted to size_t and any firmware-supplied "length" < 12 makes the subtraction wrap to a huge value. The loop body then reads a 12-byte struct tlv_type_nvm past the end of the short vmalloc'd firmware buffer (and the EDL_TAG_ID_* handlers can write past it). Rewrite the bound as "idx + sizeof(struct tlv_type_nvm) <= length"; both operands are non-negative, so it no longer underflows and a "length" too small for one record correctly skips the loop. BUG: KASAN: vmalloc-out-of-bounds in qca_download_firmware.isra.0 (drivers/bluetooth/btqca.c:421) Read of size 2 at addr ffffc900000e5004 by task kworker/u9:0/52 Workqueue: hci0 hci_power_on Call Trace: ... kasan_report (mm/kasan/report.c:595) qca_download_firmware.isra.0 (drivers/bluetooth/btqca.c:421 drivers/bluetooth/btqca.c:617) qca_uart_setup (drivers/bluetooth/btqca.c:948) qca_setup (drivers/bluetooth/hci_qca.c:2029) hci_uart_setup (drivers/bluetooth/hci_ldisc.c:438) hci_dev_open_sync (net/bluetooth/hci_sync.c:5227) hci_power_on (net/bluetooth/hci_core.c:920) process_one_work (kernel/workqueue.c:3322) worker_thread (kernel/workqueue.c:3486) kthread (kernel/kthread.c:436) ret_from_fork (arch/x86/kernel/process.c:158) ret_from_fork_asm (arch/x86/entry/entry_64.S:245) | ||||
| CVE-2026-64565 | 1 Linux | 1 Linux Kernel | 2026-08-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: Input: ims-pcu - fix heap-buffer-overflow in ims_pcu_process_data() The `ims_pcu_process_data()` processes incoming URB data byte by byte. However, it fails to check if the `read_pos` index exceeds IMS_PCU_BUF_SIZE. If a malicious USB device sends a packet larger than IMS_PCU_BUF_SIZE, `read_pos` will increment indefinitely. Moreover, since `read_pos` is located immediately after `read_buf`, the attacker can overwrite `read_pos` itself to arbitrarily control the index. This manipulated `read_pos` is subsequently used in `ims_pcu_handle_response()` to copy data into `cmd_buf`, leading to a heap buffer overflow. Specifically, an attacker can overwrite the `cmd_done.wait.head` located at offset 136 relative to `cmd_buf` in the `ims_pcu_handle_response()`. Consequently, when the driver calls `complete(&pcu->cmd_done)`, it triggers a control flow hijack by using the manipulated pointer. Fix this by adding a bounds check for `read_pos` before writing to `read_buf`. If the packet is too long, discard it, log a warning, and reset the parser state. [dtor: factor out resetting packet state, reset checksum as well] | ||||
| CVE-2026-23394 | 1 Linux | 1 Linux Kernel | 2026-08-19 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: af_unix: Give up GC if MSG_PEEK intervened. Igor Ushakov reported that GC purged the receive queue of an alive socket due to a race with MSG_PEEK with a nice repro. This is the exact same issue previously fixed by commit cbcf01128d0a ("af_unix: fix garbage collect vs MSG_PEEK"). After GC was replaced with the current algorithm, the cited commit removed the locking dance in unix_peek_fds() and reintroduced the same issue. The problem is that MSG_PEEK bumps a file refcount without interacting with GC. Consider an SCC containing sk-A and sk-B, where sk-A is close()d but can be recv()ed via sk-B. The bad thing happens if sk-A is recv()ed with MSG_PEEK from sk-B and sk-B is close()d while GC is checking unix_vertex_dead() for sk-A and sk-B. GC thread User thread --------- ----------- unix_vertex_dead(sk-A) -> true <------. \ `------ recv(sk-B, MSG_PEEK) invalidate !! -> sk-A's file refcount : 1 -> 2 close(sk-B) -> sk-B's file refcount : 2 -> 1 unix_vertex_dead(sk-B) -> true Initially, sk-A's file refcount is 1 by the inflight fd in sk-B recvq. GC thinks sk-A is dead because the file refcount is the same as the number of its inflight fds. However, sk-A's file refcount is bumped silently by MSG_PEEK, which invalidates the previous evaluation. At this moment, sk-B's file refcount is 2; one by the open fd, and one by the inflight fd in sk-A. The subsequent close() releases one refcount by the former. Finally, GC incorrectly concludes that both sk-A and sk-B are dead. One option is to restore the locking dance in unix_peek_fds(), but we can resolve this more elegantly thanks to the new algorithm. The point is that the issue does not occur without the subsequent close() and we actually do not need to synchronise MSG_PEEK with the dead SCC detection. When the issue occurs, close() and GC touch the same file refcount. If GC sees the refcount being decremented by close(), it can just give up garbage-collecting the SCC. Therefore, we only need to signal the race during MSG_PEEK with a proper memory barrier to make it visible to the GC. Let's use seqcount_t to notify GC when MSG_PEEK occurs and let it defer the SCC to the next run. This way no locking is needed on the MSG_PEEK side, and we can avoid imposing a penalty on every MSG_PEEK unnecessarily. Note that we can retry within unix_scc_dead() if MSG_PEEK is detected, but we do not do so to avoid hung task splat from abusive MSG_PEEK calls. | ||||
| CVE-2025-40307 | 1 Linux | 1 Linux Kernel | 2026-08-19 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: exfat: validate cluster allocation bits of the allocation bitmap syzbot created an exfat image with cluster bits not set for the allocation bitmap. exfat-fs reads and uses the allocation bitmap without checking this. The problem is that if the start cluster of the allocation bitmap is 6, cluster 6 can be allocated when creating a directory with mkdir. exfat zeros out this cluster in exfat_mkdir, which can delete existing entries. This can reallocate the allocated entries. In addition, the allocation bitmap is also zeroed out, so cluster 6 can be reallocated. This patch adds exfat_test_bitmap_range to validate that clusters used for the allocation bitmap are correctly marked as in-use. | ||||
| CVE-2025-39901 | 1 Linux | 1 Linux Kernel | 2026-08-19 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: i40e: remove read access to debugfs files The 'command' and 'netdev_ops' debugfs files are a legacy debugging interface supported by the i40e driver since its early days by commit 02e9c290814c ("i40e: debugfs interface"). Both of these debugfs files provide a read handler which is mostly useless, and which is implemented with questionable logic. They both use a static 256 byte buffer which is initialized to the empty string. In the case of the 'command' file this buffer is literally never used and simply wastes space. In the case of the 'netdev_ops' file, the last command written is saved here. On read, the files contents are presented as the name of the device followed by a colon and then the contents of their respective static buffer. For 'command' this will always be "<device>: ". For 'netdev_ops', this will be "<device>: <last command written>". But note the buffer is shared between all devices operated by this module. At best, it is mostly meaningless information, and at worse it could be accessed simultaneously as there doesn't appear to be any locking mechanism. We have also recently received multiple reports for both read functions about their use of snprintf and potential overflow that could result in reading arbitrary kernel memory. For the 'command' file, this is definitely impossible, since the static buffer is always zero and never written to. For the 'netdev_ops' file, it does appear to be possible, if the user carefully crafts the command input, it will be copied into the buffer, which could be large enough to cause snprintf to truncate, which then causes the copy_to_user to read beyond the length of the buffer allocated by kzalloc. A minimal fix would be to replace snprintf() with scnprintf() which would cap the return to the number of bytes written, preventing an overflow. A more involved fix would be to drop the mostly useless static buffers, saving 512 bytes and modifying the read functions to stop needing those as input. Instead, lets just completely drop the read access to these files. These are debug interfaces exposed as part of debugfs, and I don't believe that dropping read access will break any script, as the provided output is pretty useless. You can find the netdev name through other more standard interfaces, and the 'netdev_ops' interface can easily result in garbage if you issue simultaneous writes to multiple devices at once. In order to properly remove the i40e_dbg_netdev_ops_buf, we need to refactor its write function to avoid using the static buffer. Instead, use the same logic as the i40e_dbg_command_write, with an allocated buffer. Update the code to use this instead of the static buffer, and ensure we free the buffer on exit. This fixes simultaneous writes to 'netdev_ops' on multiple devices, and allows us to remove the now unused static buffer along with removing the read access. | ||||
| CVE-2024-50125 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2026-08-19 | 8 High |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: SCO: Fix UAF on sco_sock_timeout conn->sk maybe have been unlinked/freed while waiting for sco_conn_lock so this checks if the conn->sk is still valid by checking if it part of sco_sk_list. | ||||
| CVE-2024-26730 | 1 Linux | 1 Linux Kernel | 2026-08-19 | 7.3 High |
| In the Linux kernel, the following vulnerability has been resolved: hwmon: (nct6775) Fix access to temperature configuration registers The number of temperature configuration registers does not always match the total number of temperature registers. This can result in access errors reported if KASAN is enabled. BUG: KASAN: global-out-of-bounds in nct6775_probe+0x5654/0x6fe9 nct6775_core | ||||
| CVE-2021-41372 | 1 Microsoft | 1 Power Bi Report Server | 2026-08-19 | 7.6 High |
| A Cross-Site Scripting (XSS) and Cross-Site Request Forgery (CSRF) vulnerability exists when Power BI Report Server Template file (pbix) containing HTML files is uploaded to the server and HTML files are accessed directly by the victim. Combining these 2 vulnerabilities together, an attacker is able to upload malicious Power BI templates files to the server using the victim's session and run scripts in the security context of the user and perform privilege escalation in case the victim has admin privileges when the victim access one of the HTML files present in the malicious Power BI template uploaded. The security update addresses the vulnerability by helping to ensure that Power BI Report Server properly sanitize file uploads. | ||||
| CVE-2021-42306 | 1 Microsoft | 4 Azure Active Directory, Azure Active Site Recovery, Azure Automation and 1 more | 2026-08-19 | 8.1 High |
| An information disclosure vulnerability manifests when a user or an application uploads unprotected private key data as part of an authentication certificate keyCredential on an Azure AD Application or Service Principal (which is not recommended). This vulnerability allows a user or service in the tenant with application read access to read the private key data that was added to the application. Azure AD addressed this vulnerability by preventing disclosure of any private key values added to the application. Microsoft has identified services that could manifest this vulnerability, and steps that customers should take to be protected. Refer to the FAQ section for more information. For more details on this issue, please refer to the MSRC Blog Entry. | ||||
| CVE-2021-26444 | 1 Microsoft | 1 Azure Real Time Operating System | 2026-08-19 | 3.3 Low |
| Azure RTOS Information Disclosure Vulnerability | ||||
| CVE-2021-42323 | 1 Microsoft | 1 Azure Real Time Operating System | 2026-08-19 | 3.3 Low |
| Azure RTOS Information Disclosure Vulnerability | ||||
| CVE-2021-42278 | 1 Microsoft | 11 Windows Server 2004, Windows Server 2008, Windows Server 2008 R2 and 8 more | 2026-08-19 | 7.5 High |
| Active Directory Domain Services Elevation of Privilege Vulnerability | ||||
| CVE-2021-41356 | 1 Microsoft | 14 Windows 10, Windows 10 1507, Windows 10 1607 and 11 more | 2026-08-19 | 7.5 High |
| Windows Denial of Service Vulnerability | ||||
| CVE-2021-42305 | 1 Microsoft | 1 Exchange Server | 2026-08-19 | 6.5 Medium |
| Microsoft Exchange Server Spoofing Vulnerability | ||||
| CVE-2021-42298 | 1 Microsoft | 1 Malware Protection Engine | 2026-08-19 | 7.8 High |
| Microsoft Defender Remote Code Execution Vulnerability | ||||
| CVE-2021-42296 | 1 Microsoft | 3 365 Apps, Office 2021, Office Long Term Servicing Channel | 2026-08-19 | 7.8 High |
| Microsoft Word Remote Code Execution Vulnerability | ||||
| CVE-2021-42291 | 1 Microsoft | 11 Windows Server, Windows Server 2004, Windows Server 2008 and 8 more | 2026-08-19 | 7.5 High |
| Active Directory Domain Services Elevation of Privilege Vulnerability | ||||