Export limit exceeded: 28092 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (28092 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-96402 | 1 Eclipse | 1 Threadx Usbx | 2026-10-20 | N/A |
| A malicious USB MTP/PTP device can cause the USBX host to read past a heap buffer during ordinary object enumeration, leaking adjacent heap contents to the application or faulting on an unmapped page. | ||||
| CVE-2026-95111 | 1 Eclipse | 1 Threadx | 2026-10-20 | N/A |
| A memory-protected ThreadX module's queue request reaches the Module Manager's dispatch layer, which decides how much of the module's buffer the privileged queue copy may touch and hands that extent to the module port's range check. A queue's `tx_queue_message_size` is a count of `ULONG`s and the copy moves that many words, so the extent is `message_size * sizeof(ULONG)` bytes. The front-send dispatcher passed the word count itself. `tx_queue_send` and `tx_queue_receive`, either side of it in the same header, have always multiplied. A source buffer ending `message_size` bytes into memory the module may read was therefore accepted, and `_txe_queue_front_send` then read `message_size * sizeof(ULONG)` bytes from it in privileged mode — `3 * message_size` bytes past the end of what the module is allowed to read. The words are written into the queue's message area, so a module that can receive from that queue reads them back. | ||||
| CVE-2026-95109 | 1 Eclipse | 1 Threadx | 2026-10-20 | N/A |
| The Cortex-A7 MMU Modules port validates a caller-supplied buffer by translating **one address** — the first byte. The common Module Manager hands its range check the module instance, the start address and the complete byte size; the Cortex-A7 implementation discarded the instance and the size and asked the MMU a single question about the start. A memory-protected module therefore passed any range whose first byte was user-readable, however far the rest of it reached. Privileged dispatch code then read or wrote the whole range. Because every protected-module dispatcher that consumes a buffer or an extra-parameter array goes through this one macro, the defect is not in any individual service: it is in the primitive all of them rely on. | ||||
| CVE-2026-94023 | 1 Eclipse | 1 Threadx | 2026-10-20 | N/A |
| A ThreadX module reaches a kernel object's delete service through the Module Manager's dispatch layer, which asked one question about the pointer: does the object lie outside the module's own code and data. That is the policy for *using* an object, and using an object a module does not own is supported and intended — `txm_module_object_pointer_get_extended` searches the system's created objects by name and hands back objects the application created and objects other modules created, so that a module can send to a shared queue, take a shared semaphore or get a shared mutex. Destroying one of those is not sharing it. A module could name any object it had a pointer to and have the privileged dispatcher delete it. | ||||
| CVE-2026-102182 | 1 Juniper Networks | 1 Junos Os | 2026-10-20 | 9.8 Critical |
| A Stack-based Buffer Overflow vulnerability in the kmd component of Juniper Networks Junos OS on MX Series allows an unauthenticated network attacker to execute code as root via specific IKE certificate-based packets. This issue requires IKE to be enabled with an RSA-signature IKE policy to be vulnerable. This issue affects Junos OS on MX Series: * All versions before 21.2R3-S11; * from 21.4 before 21.4R3-S12; * from 22.2 before 22.2R3-S8; * from 22.3 before 22.3R3-S5; * from 22.4 before 22.4R3-S9; | ||||
| CVE-2026-94024 | 1 Eclipse | 1 Threadx | 2026-10-20 | N/A |
| The Module Manager's object lookup validated one byte of a memory-protected module's search name and then walked as much of it as the module declared, in privileged mode, with the kernel's preemption count raised. Both lookup dispatchers are affected: the recommended `txm_module_object_pointer_get_extended` is handed a length and does not use it to bound the buffer, and the deprecated `txm_module_object_pointer_get` supplies the largest value a `UINT` can hold, so it removes the bound rather than lacking one. A module can make the walk unbounded without knowing anything about the memory it reaches, and where the walk reaches memory a privileged read cannot take, the resulting fault leaves the kernel unable to preempt for the rest of the system's life. Vulnerable functions: `_txm_module_manager_txm_module_object_pointer_get_dispatch`, `_txm_module_manager_txm_module_object_pointer_get_extended_dispatch` (both in `common_modules/module_manager/inc/txm_module_manager_dispatch.h`) and `_txm_module_manager_object_name_compare` (`common_modules/module_manager/src/txm_module_manager_util.c`). | ||||
| CVE-2026-94202 | 1 Eclipse | 1 Threadx | 2026-10-20 | N/A |
| The Module Manager's block-pool create dispatcher proved that two `ALIGN_TYPE` words of the extra-parameter array a memory-protected module supplies lay inside the module's data, and then used indices 0 through 3 of that array. One of the two unproved words is read by the dispatcher's own buffer check, which takes index 1 as the pool start and index 2 as the length to range-check it over. So the out-of-bounds read is performed by the validation code itself, before the kernel service is reached, and the size the caller's pool start is then validated against is a word the manager has not proved the module owns. The other unproved word is read when the service's argument list is built. Vulnerable function: `_txm_module_manager_tx_block_pool_create_dispatch`, in `common_modules/module_manager/inc/txm_module_manager_dispatch.h`. | ||||
| CVE-2026-100132 | 1 Adobe | 1 Acrobat For Edge | 2026-10-20 | 4.3 Medium |
| Acrobat for Edge is affected by an out-of-bounds read vulnerability that could lead to disclosure of sensitive memory. An attacker could leverage this vulnerability to disclose sensitive information. Exploitation of this issue requires user interaction in that a victim must visit a maliciously crafted URL or interact with a compromised web page. | ||||
| CVE-2026-107928 | 1 Curl | 1 Curl | 2026-10-20 | 4.8 Medium |
| When curl is built with GnuTLS, a malicious WebSocket server can make curl send memory past its send buffer. This is due to an out of bounds read following when `gnutls_record_send()` returns a number of bytes sent **greater than the number of bytes it was given to send**. GnuTLS does that after a blocked send. | ||||
| CVE-2026-103672 | 2026-10-20 | 7.1 High | ||
| The PEAK-System PCAN parser indexes a length table using attacker-controlled DLC without enforcing DLC <= 0x0f, then copies attacker payload from record+0x1c into a fixed-size stack destination. | ||||
| CVE-2026-101103 | 2026-10-20 | 5.5 Medium | ||
| The PEAK-System PCAN diagnostic call did not validate that the caller-supplied output buffer was large enough to hold the output record. | ||||
| CVE-2026-92386 | 1 Curl | 1 Curl | 2026-10-20 | 4.3 Medium |
| When writing a long cookie name and value to a Netscape cookie jar, a remote HTTP server can make `curl` write a record that exceeds its line-length parsing limit. Consequently, any subsequent `curl` invocation reading from that same cookie jar using `--cookie` silently aborts parsing prematurely upon encountering the too long line, ignoring all subsequent valid cookies in the file. | ||||
| CVE-2026-110306 | 1 Fast-uri | 1 Fast-uri | 2026-10-20 | 6.1 Medium |
| fast-uri is a dependency-free RFC 3986 URI parser and serializer for Node.js. In versions before 2.4.8, from 3.0.0 through 3.1.8, and from 4.0.0 through 4.2.2, fast-uri percent-decodes the scheme component with the legacy global unescape() function before validating it, so an input whose decoded scheme is a dangerous token is emitted as a live scheme even though RFC 3986 does not allow percent-encoding in a scheme and no other parser accepts it. An application that screens dangerous schemes on the raw input and then stores or renders the normalized or resolved result can turn an inert string into an executable javascript, data, or vbscript URL, producing a stored or reflected cross-site scripting vector, and the equal() comparison treats an encoded and a plain scheme as the same, which can bypass equality-based allowlists. The issue is fixed in fast-uri 2.4.8, 3.1.9, and 4.2.3, and users should upgrade to one of these versions or later. As a workaround, reject input whose scheme part contains a percent sign, or check the parsed scheme against an allowlist after normalization and use that same parsed result rather than the raw string. | ||||
| CVE-2026-98556 | 1 Linux | 1 Linux Kernel | 2026-10-20 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: gve: DQO: reject TSO packets with an out of range MSS gve_prep_tso() notes that the device requires the MSS to be <= 9728, but does not enforce it, assuming the 9K MTU enforced by the hypervisor and the 64KB limit on TSO sizes are enough. This does not hold for packets that were not generated locally. A guest behind a tap, or any packet socket user, can provide an arbitrary gso_size in virtio_net_hdr. Layer 2 forwarding does not check the MTU for GSO packets (is_skb_forwardable()), and gso_features_check() only bounds skb->len and gso_segs, never gso_size. Such a packet reaches gve_tx_fill_tso_ctx_desc(), which puts gso_size into the mss field of the TSO context descriptor. This field is 14 bits wide, so a gso_size of 16384 is silently turned into an MSS of zero. Drop these packets from gve_prep_tso(), and make sure that gve_features_check_dqo() leaves their GSO bits alone: skb_segment() splits at gso_size regardless of the MTU, so falling back to software segmentation would give the device non TSO packets bigger than the 9728 bytes it supports. Note that the device can still be given oversized non TSO packets when the stack segments in software for other reasons, for instance after TSO has been disabled with ethtool. This is a generic issue, because the MTU check is skipped for GSO packets in the forwarding path, and is addressed separately. | ||||
| CVE-2026-86874 | 1 Apple | 1 Xcode | 2026-10-20 | 3.3 Low |
| An out-of-bounds read was addressed with improved input validation. This issue is fixed in Xcode 27. Parsing a maliciously crafted binary may lead to unexpected tool termination. | ||||
| CVE-2026-93475 | 1 Eclipse | 1 Threadx Netx Duo | 2026-10-20 | N/A |
| The X.509 parser in NetX Secure accepts an RSA public key of any size, but every signature-verification path decrypts into fixed-size buffers dimensioned for the `NX_CRYPTO_MAX_RSA_MODULUS_SIZE` default of 4096 bits. A certificate carrying a larger modulus drives an out-of-bounds write past a file-scope static during ordinary certificate-chain verification. It is reachable pre-authentication. The issuer used for the crypto operation is looked up in the remote, peer-supplied store before the trusted store, so the attacker supplies the oversized key themselves as an intermediate in the chain they present. It triggers on a TLS or DTLS client verifying a malicious server's chain, and on a server performing client-certificate authentication. | ||||
| CVE-2026-92853 | 1 Eclipse | 1 Threadx Netx Duo | 2026-10-20 | N/A |
| The TLS 1.3 Certificate-message parser in NetX Secure decrements the message length to skip a context byte without first establishing that the message has a byte to skip. A zero-length Certificate message therefore wraps the unsigned length to `0xFFFFFFFF`, which makes the bounds check that follows vacuous and sends the parser reading past the session packet buffer. The trigger is a four-byte handshake header and requires no cryptographic validity. It is reachable pre-authentication. | ||||
| CVE-2026-92843 | 1 Eclipse | 1 Threadx Netx Duo | 2026-10-20 | N/A |
| A missing bounds check in the TLS 1.3 Certificate-message parser of NetX Secure lets a malicious TLS 1.3 server trigger an unsigned-integer underflow and a subsequent heap out-of-bounds read in any peer that processes a remote Certificate message. It is reachable pre-authentication, during the normal handshake, before certificate verification completes. | ||||
| CVE-2026-92539 | 1 Grafana | 1 Grafana Enterprise | 2026-10-20 | 6.7 Medium |
| A service account with user-management permissions in one organization can read, modify, disable or delete users belonging to other organizations on the same Grafana instance through the SCIM API (insecure direct object reference). Only Grafana Enterprise instances with SCIM enabled are affected. | ||||
| CVE-2026-113602 | 1 Json-smart Project | 1 Json-smart | 2026-10-20 | 5.3 Medium |
| json-smart through 2.6.0 contains an input validation bypass vulnerability that allows attackers to evade strict-mode trailing-data checks by inserting a literal 0x1A character. Attackers can append 0x1A and malformed content to pass JSONValue.parseStrict or isValidJsonStrict validation, creating parser differentials with downstream parsers like Jackson or Gson. | ||||