Export limit exceeded: 16388 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (16388 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2024-41009 | 2 Linux, Redhat | 6 Linux Kernel, Enterprise Linux, Rhel Aus and 3 more | 2025-11-03 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Fix overrunning reservations in ringbuf The BPF ring buffer internally is implemented as a power-of-2 sized circular buffer, with two logical and ever-increasing counters: consumer_pos is the consumer counter to show which logical position the consumer consumed the data, and producer_pos which is the producer counter denoting the amount of data reserved by all producers. Each time a record is reserved, the producer that "owns" the record will successfully advance producer counter. In user space each time a record is read, the consumer of the data advanced the consumer counter once it finished processing. Both counters are stored in separate pages so that from user space, the producer counter is read-only and the consumer counter is read-write. One aspect that simplifies and thus speeds up the implementation of both producers and consumers is how the data area is mapped twice contiguously back-to-back in the virtual memory, allowing to not take any special measures for samples that have to wrap around at the end of the circular buffer data area, because the next page after the last data page would be first data page again, and thus the sample will still appear completely contiguous in virtual memory. Each record has a struct bpf_ringbuf_hdr { u32 len; u32 pg_off; } header for book-keeping the length and offset, and is inaccessible to the BPF program. Helpers like bpf_ringbuf_reserve() return `(void *)hdr + BPF_RINGBUF_HDR_SZ` for the BPF program to use. Bing-Jhong and Muhammad reported that it is however possible to make a second allocated memory chunk overlapping with the first chunk and as a result, the BPF program is now able to edit first chunk's header. For example, consider the creation of a BPF_MAP_TYPE_RINGBUF map with size of 0x4000. Next, the consumer_pos is modified to 0x3000 /before/ a call to bpf_ringbuf_reserve() is made. This will allocate a chunk A, which is in [0x0,0x3008], and the BPF program is able to edit [0x8,0x3008]. Now, lets allocate a chunk B with size 0x3000. This will succeed because consumer_pos was edited ahead of time to pass the `new_prod_pos - cons_pos > rb->mask` check. Chunk B will be in range [0x3008,0x6010], and the BPF program is able to edit [0x3010,0x6010]. Due to the ring buffer memory layout mentioned earlier, the ranges [0x0,0x4000] and [0x4000,0x8000] point to the same data pages. This means that chunk B at [0x4000,0x4008] is chunk A's header. bpf_ringbuf_submit() / bpf_ringbuf_discard() use the header's pg_off to then locate the bpf_ringbuf itself via bpf_ringbuf_restore_from_rec(). Once chunk B modified chunk A's header, then bpf_ringbuf_commit() refers to the wrong page and could cause a crash. Fix it by calculating the oldest pending_pos and check whether the range from the oldest outstanding record to the newest would span beyond the ring buffer size. If that is the case, then reject the request. We've tested with the ring buffer benchmark in BPF selftests (./benchs/run_bench_ringbufs.sh) before/after the fix and while it seems a bit slower on some benchmarks, it is still not significantly enough to matter. | ||||
| CVE-2024-41007 | 2 Linux, Redhat | 3 Linux Kernel, Enterprise Linux, Rhel Eus | 2025-11-03 | 3.3 Low |
| In the Linux kernel, the following vulnerability has been resolved: tcp: avoid too many retransmit packets If a TCP socket is using TCP_USER_TIMEOUT, and the other peer retracted its window to zero, tcp_retransmit_timer() can retransmit a packet every two jiffies (2 ms for HZ=1000), for about 4 minutes after TCP_USER_TIMEOUT has 'expired'. The fix is to make sure tcp_rtx_probe0_timed_out() takes icsk->icsk_user_timeout into account. Before blamed commit, the socket would not timeout after icsk->icsk_user_timeout, but would use standard exponential backoff for the retransmits. Also worth noting that before commit e89688e3e978 ("net: tcp: fix unexcepted socket die when snd_wnd is 0"), the issue would last 2 minutes instead of 4. | ||||
| CVE-2024-41001 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-11-03 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: io_uring/sqpoll: work around a potential audit memory leak kmemleak complains that there's a memory leak related to connect handling: unreferenced object 0xffff0001093bdf00 (size 128): comm "iou-sqp-455", pid 457, jiffies 4294894164 hex dump (first 32 bytes): 02 00 fa ea 7f 00 00 01 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace (crc 2e481b1a): [<00000000c0a26af4>] kmemleak_alloc+0x30/0x38 [<000000009c30bb45>] kmalloc_trace+0x228/0x358 [<000000009da9d39f>] __audit_sockaddr+0xd0/0x138 [<0000000089a93e34>] move_addr_to_kernel+0x1a0/0x1f8 [<000000000b4e80e6>] io_connect_prep+0x1ec/0x2d4 [<00000000abfbcd99>] io_submit_sqes+0x588/0x1e48 [<00000000e7c25e07>] io_sq_thread+0x8a4/0x10e4 [<00000000d999b491>] ret_from_fork+0x10/0x20 which can can happen if: 1) The command type does something on the prep side that triggers an audit call. 2) The thread hasn't done any operations before this that triggered an audit call inside ->issue(), where we have audit_uring_entry() and audit_uring_exit(). Work around this by issuing a blanket NOP operation before the SQPOLL does anything. | ||||
| CVE-2024-40989 | 2 Linux, Redhat | 3 Linux Kernel, Enterprise Linux, Rhel Eus | 2025-11-03 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: KVM: arm64: Disassociate vcpus from redistributor region on teardown When tearing down a redistributor region, make sure we don't have any dangling pointer to that region stored in a vcpu. | ||||
| CVE-2024-40977 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-11-03 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7921s: fix potential hung tasks during chip recovery During chip recovery (e.g. chip reset), there is a possible situation that kernel worker reset_work is holding the lock and waiting for kernel thread stat_worker to be parked, while stat_worker is waiting for the release of the same lock. It causes a deadlock resulting in the dumping of hung tasks messages and possible rebooting of the device. This patch prevents the execution of stat_worker during the chip recovery. | ||||
| CVE-2024-40957 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-11-03 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: seg6: fix parameter passing when calling NF_HOOK() in End.DX4 and End.DX6 behaviors input_action_end_dx4() and input_action_end_dx6() are called NF_HOOK() for PREROUTING hook, in PREROUTING hook, we should passing a valid indev, and a NULL outdev to NF_HOOK(), otherwise may trigger a NULL pointer dereference, as below: [74830.647293] BUG: kernel NULL pointer dereference, address: 0000000000000090 [74830.655633] #PF: supervisor read access in kernel mode [74830.657888] #PF: error_code(0x0000) - not-present page [74830.659500] PGD 0 P4D 0 [74830.660450] Oops: 0000 [#1] PREEMPT SMP PTI ... [74830.664953] Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011 [74830.666569] RIP: 0010:rpfilter_mt+0x44/0x15e [ipt_rpfilter] ... [74830.689725] Call Trace: [74830.690402] <IRQ> [74830.690953] ? show_trace_log_lvl+0x1c4/0x2df [74830.692020] ? show_trace_log_lvl+0x1c4/0x2df [74830.693095] ? ipt_do_table+0x286/0x710 [ip_tables] [74830.694275] ? __die_body.cold+0x8/0xd [74830.695205] ? page_fault_oops+0xac/0x140 [74830.696244] ? exc_page_fault+0x62/0x150 [74830.697225] ? asm_exc_page_fault+0x22/0x30 [74830.698344] ? rpfilter_mt+0x44/0x15e [ipt_rpfilter] [74830.699540] ipt_do_table+0x286/0x710 [ip_tables] [74830.700758] ? ip6_route_input+0x19d/0x240 [74830.701752] nf_hook_slow+0x3f/0xb0 [74830.702678] input_action_end_dx4+0x19b/0x1e0 [74830.703735] ? input_action_end_t+0xe0/0xe0 [74830.704734] seg6_local_input_core+0x2d/0x60 [74830.705782] lwtunnel_input+0x5b/0xb0 [74830.706690] __netif_receive_skb_one_core+0x63/0xa0 [74830.707825] process_backlog+0x99/0x140 [74830.709538] __napi_poll+0x2c/0x160 [74830.710673] net_rx_action+0x296/0x350 [74830.711860] __do_softirq+0xcb/0x2ac [74830.713049] do_softirq+0x63/0x90 input_action_end_dx4() passing a NULL indev to NF_HOOK(), and finally trigger a NULL dereference in rpfilter_mt()->rpfilter_is_loopback(): static bool rpfilter_is_loopback(const struct sk_buff *skb, const struct net_device *in) { // in is NULL return skb->pkt_type == PACKET_LOOPBACK || in->flags & IFF_LOOPBACK; } | ||||
| CVE-2024-40956 | 2 Linux, Redhat | 3 Linux Kernel, Enterprise Linux, Rhel Eus | 2025-11-03 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: dmaengine: idxd: Fix possible Use-After-Free in irq_process_work_list Use list_for_each_entry_safe() to allow iterating through the list and deleting the entry in the iteration process. The descriptor is freed via idxd_desc_complete() and there's a slight chance may cause issue for the list iterator when the descriptor is reused by another thread without it being deleted from the list. | ||||
| CVE-2024-40954 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-11-03 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net: do not leave a dangling sk pointer, when socket creation fails It is possible to trigger a use-after-free by: * attaching an fentry probe to __sock_release() and the probe calling the bpf_get_socket_cookie() helper * running traceroute -I 1.1.1.1 on a freshly booted VM A KASAN enabled kernel will log something like below (decoded and stripped): ================================================================== BUG: KASAN: slab-use-after-free in __sock_gen_cookie (./arch/x86/include/asm/atomic64_64.h:15 ./include/linux/atomic/atomic-arch-fallback.h:2583 ./include/linux/atomic/atomic-instrumented.h:1611 net/core/sock_diag.c:29) Read of size 8 at addr ffff888007110dd8 by task traceroute/299 CPU: 2 PID: 299 Comm: traceroute Tainted: G E 6.10.0-rc2+ #2 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.2-debian-1.16.2-1 04/01/2014 Call Trace: <TASK> dump_stack_lvl (lib/dump_stack.c:117 (discriminator 1)) print_report (mm/kasan/report.c:378 mm/kasan/report.c:488) ? __sock_gen_cookie (./arch/x86/include/asm/atomic64_64.h:15 ./include/linux/atomic/atomic-arch-fallback.h:2583 ./include/linux/atomic/atomic-instrumented.h:1611 net/core/sock_diag.c:29) kasan_report (mm/kasan/report.c:603) ? __sock_gen_cookie (./arch/x86/include/asm/atomic64_64.h:15 ./include/linux/atomic/atomic-arch-fallback.h:2583 ./include/linux/atomic/atomic-instrumented.h:1611 net/core/sock_diag.c:29) kasan_check_range (mm/kasan/generic.c:183 mm/kasan/generic.c:189) __sock_gen_cookie (./arch/x86/include/asm/atomic64_64.h:15 ./include/linux/atomic/atomic-arch-fallback.h:2583 ./include/linux/atomic/atomic-instrumented.h:1611 net/core/sock_diag.c:29) bpf_get_socket_ptr_cookie (./arch/x86/include/asm/preempt.h:94 ./include/linux/sock_diag.h:42 net/core/filter.c:5094 net/core/filter.c:5092) bpf_prog_875642cf11f1d139___sock_release+0x6e/0x8e bpf_trampoline_6442506592+0x47/0xaf __sock_release (net/socket.c:652) __sock_create (net/socket.c:1601) ... Allocated by task 299 on cpu 2 at 78.328492s: kasan_save_stack (mm/kasan/common.c:48) kasan_save_track (mm/kasan/common.c:68) __kasan_slab_alloc (mm/kasan/common.c:312 mm/kasan/common.c:338) kmem_cache_alloc_noprof (mm/slub.c:3941 mm/slub.c:4000 mm/slub.c:4007) sk_prot_alloc (net/core/sock.c:2075) sk_alloc (net/core/sock.c:2134) inet_create (net/ipv4/af_inet.c:327 net/ipv4/af_inet.c:252) __sock_create (net/socket.c:1572) __sys_socket (net/socket.c:1660 net/socket.c:1644 net/socket.c:1706) __x64_sys_socket (net/socket.c:1718) do_syscall_64 (arch/x86/entry/common.c:52 arch/x86/entry/common.c:83) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130) Freed by task 299 on cpu 2 at 78.328502s: kasan_save_stack (mm/kasan/common.c:48) kasan_save_track (mm/kasan/common.c:68) kasan_save_free_info (mm/kasan/generic.c:582) poison_slab_object (mm/kasan/common.c:242) __kasan_slab_free (mm/kasan/common.c:256) kmem_cache_free (mm/slub.c:4437 mm/slub.c:4511) __sk_destruct (net/core/sock.c:2117 net/core/sock.c:2208) inet_create (net/ipv4/af_inet.c:397 net/ipv4/af_inet.c:252) __sock_create (net/socket.c:1572) __sys_socket (net/socket.c:1660 net/socket.c:1644 net/socket.c:1706) __x64_sys_socket (net/socket.c:1718) do_syscall_64 (arch/x86/entry/common.c:52 arch/x86/entry/common.c:83) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130) Fix this by clearing the struct socket reference in sk_common_release() to cover all protocol families create functions, which may already attached the reference to the sk object with sock_init_data(). | ||||
| CVE-2024-40948 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-11-03 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mm/page_table_check: fix crash on ZONE_DEVICE Not all pages may apply to pgtable check. One example is ZONE_DEVICE pages: they map PFNs directly, and they don't allocate page_ext at all even if there's struct page around. One may reference devm_memremap_pages(). When both ZONE_DEVICE and page-table-check enabled, then try to map some dax memories, one can trigger kernel bug constantly now when the kernel was trying to inject some pfn maps on the dax device: kernel BUG at mm/page_table_check.c:55! While it's pretty legal to use set_pxx_at() for ZONE_DEVICE pages for page fault resolutions, skip all the checks if page_ext doesn't even exist in pgtable checker, which applies to ZONE_DEVICE but maybe more. | ||||
| CVE-2024-40940 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-11-03 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net/mlx5: Fix tainted pointer delete is case of flow rules creation fail In case of flow rule creation fail in mlx5_lag_create_port_sel_table(), instead of previously created rules, the tainted pointer is deleted deveral times. Fix this bug by using correct flow rules pointers. Found by Linux Verification Center (linuxtesting.org) with SVACE. | ||||
| CVE-2024-40939 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-11-03 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net: wwan: iosm: Fix tainted pointer delete is case of region creation fail In case of region creation fail in ipc_devlink_create_region(), previously created regions delete process starts from tainted pointer which actually holds error code value. Fix this bug by decreasing region index before delete. Found by Linux Verification Center (linuxtesting.org) with SVACE. | ||||
| CVE-2024-40929 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-11-03 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: iwlwifi: mvm: check n_ssids before accessing the ssids In some versions of cfg80211, the ssids poinet might be a valid one even though n_ssids is 0. Accessing the pointer in this case will cuase an out-of-bound access. Fix this by checking n_ssids first. | ||||
| CVE-2024-40927 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-11-03 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: xhci: Handle TD clearing for multiple streams case When multiple streams are in use, multiple TDs might be in flight when an endpoint is stopped. We need to issue a Set TR Dequeue Pointer for each, to ensure everything is reset properly and the caches cleared. Change the logic so that any N>1 TDs found active for different streams are deferred until after the first one is processed, calling xhci_invalidate_cancelled_tds() again from xhci_handle_cmd_set_deq() to queue another command until we are done with all of them. Also change the error/"should never happen" paths to ensure we at least clear any affected TDs, even if we can't issue a command to clear the hardware cache, and complain loudly with an xhci_warn() if this ever happens. This problem case dates back to commit e9df17eb1408 ("USB: xhci: Correct assumptions about number of rings per endpoint.") early on in the XHCI driver's life, when stream support was first added. It was then identified but not fixed nor made into a warning in commit 674f8438c121 ("xhci: split handling halted endpoints into two steps"), which added a FIXME comment for the problem case (without materially changing the behavior as far as I can tell, though the new logic made the problem more obvious). Then later, in commit 94f339147fc3 ("xhci: Fix failure to give back some cached cancelled URBs."), it was acknowledged again. [Mathias: commit 94f339147fc3 ("xhci: Fix failure to give back some cached cancelled URBs.") was a targeted regression fix to the previously mentioned patch. Users reported issues with usb stuck after unmounting/disconnecting UAS devices. This rolled back the TD clearing of multiple streams to its original state.] Apparently the commit author was aware of the problem (yet still chose to submit it): It was still mentioned as a FIXME, an xhci_dbg() was added to log the problem condition, and the remaining issue was mentioned in the commit description. The choice of making the log type xhci_dbg() for what is, at this point, a completely unhandled and known broken condition is puzzling and unfortunate, as it guarantees that no actual users would see the log in production, thereby making it nigh undebuggable (indeed, even if you turn on DEBUG, the message doesn't really hint at there being a problem at all). It took me *months* of random xHC crashes to finally find a reliable repro and be able to do a deep dive debug session, which could all have been avoided had this unhandled, broken condition been actually reported with a warning, as it should have been as a bug intentionally left in unfixed (never mind that it shouldn't have been left in at all). > Another fix to solve clearing the caches of all stream rings with > cancelled TDs is needed, but not as urgent. 3 years after that statement and 14 years after the original bug was introduced, I think it's finally time to fix it. And maybe next time let's not leave bugs unfixed (that are actually worse than the original bug), and let's actually get people to review kernel commits please. Fixes xHC crashes and IOMMU faults with UAS devices when handling errors/faults. Easiest repro is to use `hdparm` to mark an early sector (e.g. 1024) on a disk as bad, then `cat /dev/sdX > /dev/null` in a loop. At least in the case of JMicron controllers, the read errors end up having to cancel two TDs (for two queued requests to different streams) and the one that didn't get cleared properly ends up faulting the xHC entirely when it tries to access DMA pages that have since been unmapped, referred to by the stale TDs. This normally happens quickly (after two or three loops). After this fix, I left the `cat` in a loop running overnight and experienced no xHC failures, with all read errors recovered properly. Repro'd and tested on an Apple M1 Mac Mini (dwc3 host). On systems without an IOMMU, this bug would instead silently corrupt freed memory, making this a ---truncated--- | ||||
| CVE-2024-40924 | 2 Linux, Redhat | 3 Linux Kernel, Enterprise Linux, Rhel Eus | 2025-11-03 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/i915/dpt: Make DPT object unshrinkable In some scenarios, the DPT object gets shrunk but the actual framebuffer did not and thus its still there on the DPT's vm->bound_list. Then it tries to rewrite the PTEs via a stale CPU mapping. This causes panic. [vsyrjala: Add TODO comment] (cherry picked from commit 51064d471c53dcc8eddd2333c3f1c1d9131ba36c) | ||||
| CVE-2024-40919 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-11-03 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: bnxt_en: Adjust logging of firmware messages in case of released token in __hwrm_send() In case of token is released due to token->state == BNXT_HWRM_DEFERRED, released token (set to NULL) is used in log messages. This issue is expected to be prevented by HWRM_ERR_CODE_PF_UNAVAILABLE error code. But this error code is returned by recent firmware. So some firmware may not return it. This may lead to NULL pointer dereference. Adjust this issue by adding token pointer check. Found by Linux Verification Center (linuxtesting.org) with SVACE. | ||||
| CVE-2024-40914 | 2 Linux, Redhat | 3 Linux Kernel, Enterprise Linux, Rhel Eus | 2025-11-03 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mm/huge_memory: don't unpoison huge_zero_folio When I did memory failure tests recently, below panic occurs: kernel BUG at include/linux/mm.h:1135! invalid opcode: 0000 [#1] PREEMPT SMP NOPTI CPU: 9 PID: 137 Comm: kswapd1 Not tainted 6.9.0-rc4-00491-gd5ce28f156fe-dirty #14 RIP: 0010:shrink_huge_zero_page_scan+0x168/0x1a0 RSP: 0018:ffff9933c6c57bd0 EFLAGS: 00000246 RAX: 000000000000003e RBX: 0000000000000000 RCX: ffff88f61fc5c9c8 RDX: 0000000000000000 RSI: 0000000000000027 RDI: ffff88f61fc5c9c0 RBP: ffffcd7c446b0000 R08: ffffffff9a9405f0 R09: 0000000000005492 R10: 00000000000030ea R11: ffffffff9a9405f0 R12: 0000000000000000 R13: 0000000000000000 R14: 0000000000000000 R15: ffff88e703c4ac00 FS: 0000000000000000(0000) GS:ffff88f61fc40000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000055f4da6e9878 CR3: 0000000c71048000 CR4: 00000000000006f0 Call Trace: <TASK> do_shrink_slab+0x14f/0x6a0 shrink_slab+0xca/0x8c0 shrink_node+0x2d0/0x7d0 balance_pgdat+0x33a/0x720 kswapd+0x1f3/0x410 kthread+0xd5/0x100 ret_from_fork+0x2f/0x50 ret_from_fork_asm+0x1a/0x30 </TASK> Modules linked in: mce_inject hwpoison_inject ---[ end trace 0000000000000000 ]--- RIP: 0010:shrink_huge_zero_page_scan+0x168/0x1a0 RSP: 0018:ffff9933c6c57bd0 EFLAGS: 00000246 RAX: 000000000000003e RBX: 0000000000000000 RCX: ffff88f61fc5c9c8 RDX: 0000000000000000 RSI: 0000000000000027 RDI: ffff88f61fc5c9c0 RBP: ffffcd7c446b0000 R08: ffffffff9a9405f0 R09: 0000000000005492 R10: 00000000000030ea R11: ffffffff9a9405f0 R12: 0000000000000000 R13: 0000000000000000 R14: 0000000000000000 R15: ffff88e703c4ac00 FS: 0000000000000000(0000) GS:ffff88f61fc40000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000055f4da6e9878 CR3: 0000000c71048000 CR4: 00000000000006f0 The root cause is that HWPoison flag will be set for huge_zero_folio without increasing the folio refcnt. But then unpoison_memory() will decrease the folio refcnt unexpectedly as it appears like a successfully hwpoisoned folio leading to VM_BUG_ON_PAGE(page_ref_count(page) == 0) when releasing huge_zero_folio. Skip unpoisoning huge_zero_folio in unpoison_memory() to fix this issue. We're not prepared to unpoison huge_zero_folio yet. | ||||
| CVE-2024-40913 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-11-03 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: cachefiles: defer exposing anon_fd until after copy_to_user() succeeds After installing the anonymous fd, we can now see it in userland and close it. However, at this point we may not have gotten the reference count of the cache, but we will put it during colse fd, so this may cause a cache UAF. So grab the cache reference count before fd_install(). In addition, by kernel convention, fd is taken over by the user land after fd_install(), and the kernel should not call close_fd() after that, i.e., it should call fd_install() after everything is ready, thus fd_install() is called after copy_to_user() succeeds. | ||||
| CVE-2024-40911 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-11-03 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: cfg80211: Lock wiphy in cfg80211_get_station Wiphy should be locked before calling rdev_get_station() (see lockdep assert in ieee80211_get_station()). This fixes the following kernel NULL dereference: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000050 Mem abort info: ESR = 0x0000000096000006 EC = 0x25: DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 FSC = 0x06: level 2 translation fault Data abort info: ISV = 0, ISS = 0x00000006 CM = 0, WnR = 0 user pgtable: 4k pages, 48-bit VAs, pgdp=0000000003001000 [0000000000000050] pgd=0800000002dca003, p4d=0800000002dca003, pud=08000000028e9003, pmd=0000000000000000 Internal error: Oops: 0000000096000006 [#1] SMP Modules linked in: netconsole dwc3_meson_g12a dwc3_of_simple dwc3 ip_gre gre ath10k_pci ath10k_core ath9k ath9k_common ath9k_hw ath CPU: 0 PID: 1091 Comm: kworker/u8:0 Not tainted 6.4.0-02144-g565f9a3a7911-dirty #705 Hardware name: RPT (r1) (DT) Workqueue: bat_events batadv_v_elp_throughput_metric_update pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : ath10k_sta_statistics+0x10/0x2dc [ath10k_core] lr : sta_set_sinfo+0xcc/0xbd4 sp : ffff000007b43ad0 x29: ffff000007b43ad0 x28: ffff0000071fa900 x27: ffff00000294ca98 x26: ffff000006830880 x25: ffff000006830880 x24: ffff00000294c000 x23: 0000000000000001 x22: ffff000007b43c90 x21: ffff800008898acc x20: ffff00000294c6e8 x19: ffff000007b43c90 x18: 0000000000000000 x17: 445946354d552d78 x16: 62661f7200000000 x15: 57464f445946354d x14: 0000000000000000 x13: 00000000000000e3 x12: d5f0acbcebea978e x11: 00000000000000e3 x10: 000000010048fe41 x9 : 0000000000000000 x8 : ffff000007b43d90 x7 : 000000007a1e2125 x6 : 0000000000000000 x5 : ffff0000024e0900 x4 : ffff800000a0250c x3 : ffff000007b43c90 x2 : ffff00000294ca98 x1 : ffff000006831920 x0 : 0000000000000000 Call trace: ath10k_sta_statistics+0x10/0x2dc [ath10k_core] sta_set_sinfo+0xcc/0xbd4 ieee80211_get_station+0x2c/0x44 cfg80211_get_station+0x80/0x154 batadv_v_elp_get_throughput+0x138/0x1fc batadv_v_elp_throughput_metric_update+0x1c/0xa4 process_one_work+0x1ec/0x414 worker_thread+0x70/0x46c kthread+0xdc/0xe0 ret_from_fork+0x10/0x20 Code: a9bb7bfd 910003fd a90153f3 f9411c40 (f9402814) This happens because STA has time to disconnect and reconnect before batadv_v_elp_throughput_metric_update() delayed work gets scheduled. In this situation, ath10k_sta_state() can be in the middle of resetting arsta data when the work queue get chance to be scheduled and ends up accessing it. Locking wiphy prevents that. | ||||
| CVE-2024-40906 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-11-03 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net/mlx5: Always stop health timer during driver removal Currently, if teardown_hca fails to execute during driver removal, mlx5 does not stop the health timer. Afterwards, mlx5 continue with driver teardown. This may lead to a UAF bug, which results in page fault Oops[1], since the health timer invokes after resources were freed. Hence, stop the health monitor even if teardown_hca fails. [1] mlx5_core 0000:18:00.0: E-Switch: Unload vfs: mode(LEGACY), nvfs(0), necvfs(0), active vports(0) mlx5_core 0000:18:00.0: E-Switch: Disable: mode(LEGACY), nvfs(0), necvfs(0), active vports(0) mlx5_core 0000:18:00.0: E-Switch: Disable: mode(LEGACY), nvfs(0), necvfs(0), active vports(0) mlx5_core 0000:18:00.0: E-Switch: cleanup mlx5_core 0000:18:00.0: wait_func:1155:(pid 1967079): TEARDOWN_HCA(0x103) timeout. Will cause a leak of a command resource mlx5_core 0000:18:00.0: mlx5_function_close:1288:(pid 1967079): tear_down_hca failed, skip cleanup BUG: unable to handle page fault for address: ffffa26487064230 PGD 100c00067 P4D 100c00067 PUD 100e5a067 PMD 105ed7067 PTE 0 Oops: 0000 [#1] PREEMPT SMP PTI CPU: 0 PID: 0 Comm: swapper/0 Tainted: G OE ------- --- 6.7.0-68.fc38.x86_64 #1 Hardware name: Intel Corporation S2600WFT/S2600WFT, BIOS SE5C620.86B.02.01.0013.121520200651 12/15/2020 RIP: 0010:ioread32be+0x34/0x60 RSP: 0018:ffffa26480003e58 EFLAGS: 00010292 RAX: ffffa26487064200 RBX: ffff9042d08161a0 RCX: ffff904c108222c0 RDX: 000000010bbf1b80 RSI: ffffffffc055ddb0 RDI: ffffa26487064230 RBP: ffff9042d08161a0 R08: 0000000000000022 R09: ffff904c108222e8 R10: 0000000000000004 R11: 0000000000000441 R12: ffffffffc055ddb0 R13: ffffa26487064200 R14: ffffa26480003f00 R15: ffff904c108222c0 FS: 0000000000000000(0000) GS:ffff904c10800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffa26487064230 CR3: 00000002c4420006 CR4: 00000000007706f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: <IRQ> ? __die+0x23/0x70 ? page_fault_oops+0x171/0x4e0 ? exc_page_fault+0x175/0x180 ? asm_exc_page_fault+0x26/0x30 ? __pfx_poll_health+0x10/0x10 [mlx5_core] ? __pfx_poll_health+0x10/0x10 [mlx5_core] ? ioread32be+0x34/0x60 mlx5_health_check_fatal_sensors+0x20/0x100 [mlx5_core] ? __pfx_poll_health+0x10/0x10 [mlx5_core] poll_health+0x42/0x230 [mlx5_core] ? __next_timer_interrupt+0xbc/0x110 ? __pfx_poll_health+0x10/0x10 [mlx5_core] call_timer_fn+0x21/0x130 ? __pfx_poll_health+0x10/0x10 [mlx5_core] __run_timers+0x222/0x2c0 run_timer_softirq+0x1d/0x40 __do_softirq+0xc9/0x2c8 __irq_exit_rcu+0xa6/0xc0 sysvec_apic_timer_interrupt+0x72/0x90 </IRQ> <TASK> asm_sysvec_apic_timer_interrupt+0x1a/0x20 RIP: 0010:cpuidle_enter_state+0xcc/0x440 ? cpuidle_enter_state+0xbd/0x440 cpuidle_enter+0x2d/0x40 do_idle+0x20d/0x270 cpu_startup_entry+0x2a/0x30 rest_init+0xd0/0xd0 arch_call_rest_init+0xe/0x30 start_kernel+0x709/0xa90 x86_64_start_reservations+0x18/0x30 x86_64_start_kernel+0x96/0xa0 secondary_startup_64_no_verify+0x18f/0x19b ---[ end trace 0000000000000000 ]--- | ||||
| CVE-2024-40904 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-11-03 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: USB: class: cdc-wdm: Fix CPU lockup caused by excessive log messages The syzbot fuzzer found that the interrupt-URB completion callback in the cdc-wdm driver was taking too long, and the driver's immediate resubmission of interrupt URBs with -EPROTO status combined with the dummy-hcd emulation to cause a CPU lockup: cdc_wdm 1-1:1.0: nonzero urb status received: -71 cdc_wdm 1-1:1.0: wdm_int_callback - 0 bytes watchdog: BUG: soft lockup - CPU#0 stuck for 26s! [syz-executor782:6625] CPU#0 Utilization every 4s during lockup: #1: 98% system, 0% softirq, 3% hardirq, 0% idle #2: 98% system, 0% softirq, 3% hardirq, 0% idle #3: 98% system, 0% softirq, 3% hardirq, 0% idle #4: 98% system, 0% softirq, 3% hardirq, 0% idle #5: 98% system, 1% softirq, 3% hardirq, 0% idle Modules linked in: irq event stamp: 73096 hardirqs last enabled at (73095): [<ffff80008037bc00>] console_emit_next_record kernel/printk/printk.c:2935 [inline] hardirqs last enabled at (73095): [<ffff80008037bc00>] console_flush_all+0x650/0xb74 kernel/printk/printk.c:2994 hardirqs last disabled at (73096): [<ffff80008af10b00>] __el1_irq arch/arm64/kernel/entry-common.c:533 [inline] hardirqs last disabled at (73096): [<ffff80008af10b00>] el1_interrupt+0x24/0x68 arch/arm64/kernel/entry-common.c:551 softirqs last enabled at (73048): [<ffff8000801ea530>] softirq_handle_end kernel/softirq.c:400 [inline] softirqs last enabled at (73048): [<ffff8000801ea530>] handle_softirqs+0xa60/0xc34 kernel/softirq.c:582 softirqs last disabled at (73043): [<ffff800080020de8>] __do_softirq+0x14/0x20 kernel/softirq.c:588 CPU: 0 PID: 6625 Comm: syz-executor782 Tainted: G W 6.10.0-rc2-syzkaller-g8867bbd4a056 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 04/02/2024 Testing showed that the problem did not occur if the two error messages -- the first two lines above -- were removed; apparently adding material to the kernel log takes a surprisingly large amount of time. In any case, the best approach for preventing these lockups and to avoid spamming the log with thousands of error messages per second is to ratelimit the two dev_err() calls. Therefore we replace them with dev_err_ratelimited(). | ||||