Export limit exceeded: 99972 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (99972 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-89856 | 1 Linux | 1 Linux Kernel | 2026-09-18 | 8.4 High |
| In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Clamp MSI-X derived queue counts to avoid truncation ha->msix_count is u16, but ha->max_req_queues, ha->max_rsp_queues and ha->max_qpairs are u8. Deriving the queue count as "ha->max_req_queues = ha->msix_count - 1" therefore truncates: a board (or a misconfigured/malicious hot-plugged device) advertising 257 MSI-X vectors yields msix_count - 1 == 256, which truncates to 0. An MSI-X count of 1 zeroes it as well, and in target mode the subsequent "ha->max_req_queues--" then underflows 0 to 255. When the count is 0, qla2x00_alloc_queues() calls kzalloc_objs(struct req_que *, 0), which returns ZERO_SIZE_PTR. That is not NULL, so the allocation check passes and the following "ha->req_q_map[0] = req" dereferences ZERO_SIZE_PTR, corrupting memory or crashing the kernel. Add qla_calc_queue_count() to clamp the derived value into [1, QLA_MAX_QUEUES - 1] so it always fits in u8 and is never zero, and use it at all three derivation sites (qla25xx_iospace_config(), qla83xx_iospace_config() and qla24xx_enable_msix()). Also guard the target-mode decrement so it cannot reintroduce a zero (which would in turn underflow max_qpairs). | ||||
| CVE-2026-89861 | 1 Linux | 1 Linux Kernel | 2026-09-18 | 8.1 High |
| In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Hold vport reference in qla24xx_report_id_acquisition() In the format 1 path, the virtual port is located on ha->vp_list while holding vport_slock, but the lock is dropped before vp is used: qla_update_host_map() is called and VP_IDX_ACQUIRED/REGISTER_FC4_NEEDED/ REGISTER_FDMI_NEEDED are set on vp. No reference is taken across that window, so a concurrent qla24xx_deallocate_vp_id() can tear the vport down and free it, leading to a use-after-free. Take a vport reference (vref_count) under vport_slock when the matching vp is found, and drop it after the last use of vp. qla24xx_deallocate_vp_id() waits for vref_count to reach zero before unlinking and freeing the vport, so the pointer stays valid. This matches the reference idiom already used by the other ha->vp_list traversals. | ||||
| CVE-2026-89873 | 1 Linux | 1 Linux Kernel | 2026-09-18 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: media: v4l2-ctrls: validate HEVC EXT SPS RPS counts The HEVC SPS control carries the short-term and long-term RPS counts that decoder drivers use to walk the matching EXT SPS dynamic arrays. Reject SPS values that exceed the HEVC limits of 64 short-term sets and 32 long-term references so drivers cannot later index beyond those controls. Also reject EXT SPS ST RPS entries whose negative or positive picture counts exceed the 16-entry arrays, or whose combined delta-POC count exceeds the HEVC DPB maximum. | ||||
| CVE-2026-89893 | 1 Linux | 1 Linux Kernel | 2026-09-18 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: media: cx23885: cancel NetUP CI work before teardown netup_ci_exit() frees a netup_ci_state while its work item, netup_read_ci_status(), may still be pending or running on the system workqueue. The worker obtains the state with container_of() and dereferences it, so it must not outlive the state. netup_ci_init() queues the initial status read, and CI GPIO interrupts subsequently queue the same work from netup_ci_slot_status(). During remove, cx23885_finidev() calls free_irq() before the CI device is unregistered. free_irq() prevents further IRQ handlers from running, but does not drain work queued previously, so the worker can run after netup_ci_exit() frees the state. Call cancel_work_sync() before dvb_ca_en50221_release() and kfree(). This issue was found by an in-house static analysis tool. | ||||
| CVE-2026-89897 | 1 Linux | 1 Linux Kernel | 2026-09-18 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: media: cec: Serialize exclusive follower delivery cec_receive_notify() reads the exclusive follower pointer without the adapter lock. Serialize the no-follower check and message delivery against mode changes and release. | ||||
| CVE-2026-81736 | 1 Isc | 2 Bind, Bind 9 | 2026-09-18 | 7.5 High |
| If a BIND resolver has cached a tree of SVCB/HTTPS AliasMode records, and is then queried for the root of that tree, the resolver will spend disproportionate CPU time constructing the response. This issue affects BIND 9 versions 9.18.0 through 9.18.50, 9.20.0 through 9.20.27, 9.21.0 through 9.21.25, 9.18.11-S1 through 9.18.50-S1, and 9.20.9-S1 through 9.20.27-S1. | ||||
| CVE-2026-89814 | 1 Linux | 1 Linux Kernel | 2026-09-18 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: clamp the isolation index for rings outside a partition adev->isolation[] has one slot per partition, but a ring that is not assigned to one keeps AMDGPU_XCP_NO_PARTITION, which is ~0, so indexing the array with it is out of bounds. SDMA submissions hit this on both the isolation enforcement and the VM flush path and trip UBSAN. Fall back to the first slot the way the cleaner shader path already does, and stop taking the address before the ring type check that makes it relevant. | ||||
| CVE-2026-89819 | 1 Linux | 1 Linux Kernel | 2026-09-18 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: validate plane degamma LUT size for private color prop Unlike the CRTC degamma path, which is guarded by amdgpu_dm_verify_lut_sizes(), the per-plane degamma LUT size was never validated before use. __set_dm_plane_degamma() passed the user-supplied size straight into __is_lut_linear() and, for a non-linear LUT, into __set_input_tf() -> __drm_lut_to_dc_gamma(), the latter always iterating MAX_COLOR_LUT_ENTRIES entries regardless of the actual LUT size. A malformed AMD_PLANE_DEGAMMA_LUT blob (e.g. a single entry) could thus trigger a divide-by-zero in __is_lut_linear() or an out-of-bounds read in __drm_lut_to_dc_gamma(). Reject any plane degamma LUT whose size does not match MAX_COLOR_LUT_ENTRIES, mirroring the invariant the code already asserts a few lines below (and which the CRTC path enforces). The AMD_PLANE_DEGAMMA_LUT property is only exposed on builds with AMD_PRIVATE_COLOR defined. | ||||
| CVE-2026-89825 | 1 Linux | 1 Linux Kernel | 2026-09-18 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/panthor: fix firmware control interface bounds checks panthor_init_cs_iface() and panthor_init_csg_iface() validate firmware control interface offsets with 32-bit arithmetic and the size of the host wrapper structures. The offsets are derived from firmware-provided strides, so the arithmetic can wrap before the bounds check, and the host wrapper size is not the size of the firmware control interface being mapped. Use 64-bit arithmetic for the computed offsets and validate against the actual firmware control interface structure sizes with subtraction-based bounds checks. Also validate that the shared section is large enough for the global control interface before using it. | ||||
| CVE-2026-89826 | 1 Linux | 1 Linux Kernel | 2026-09-18 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/panthor: harden firmware build-info bounds checks panthor_fw_read_build_info() checks whether the metadata range fits in the firmware image with hdr.meta_start + hdr.meta_size. Both fields are u32, so the addition can wrap and let an out-of-bounds range pass validation. The function also reads the "git_sha: " prefix without first checking that the metadata is long enough, and meta_size == 0 can underflow the NULL terminator index. Use subtraction-based bounds checking and reject metadata that is too short to contain the expected prefix and trailing NULL byte. | ||||
| CVE-2025-43936 | 1 Dell | 1 Objectscale | 2026-09-18 | 8.1 High |
| Dell ObjectScale, versions prior to ObjectScale 4.4.0.0, contains an Improper Authentication vulnerability. An unauthenticated attacker with remote access could potentially exploit this vulnerability, leading to Unauthorized access. | ||||
| CVE-2026-61595 | 1 Djust-org | 1 Djust | 2026-09-18 | 7.7 High |
| djust provides Phoenix LiveView-style reactive server-side rendering for Django with Rust-powered performance. Prior to version 1.0.7, `djust.tenants` isolation was enforced only on the HTTP path. The current tenant was stored in `threading.local()` and set exclusively by the HTTP-only `TenantMiddleware`, so on the live (WebSocket/SSE) path `get_current_tenant()` was always `None` during mount and every event handler — and the tenant-aware `QuerySet` manager failed OPEN (returned the unfiltered queryset, ignoring `STRICT_MODE`), disclosing every tenant's rows to whoever held the socket. `threading.local` was additionally shared across connections on the `sync_to_async` executor thread. This issue is fixed in djust 1.0.7. Tenant storage moved to a `contextvars.ContextVar` (per async task); the resolved tenant is bound around WS/SSE mount and every dispatch; both managers scope the base queryset once and fail CLOSED (`.none()` under the default `STRICT_MODE`); and system check S006 warns when `STRICT_MODE=False`. No known workarounds are available on the live path. | ||||
| CVE-2026-89832 | 1 Linux | 1 Linux Kernel | 2026-09-18 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: f2fs: fix to clear dirty flag on folio in error path If node block is corrupted due to chksum mismatch or inconsistent footer info, it needs to drop clear flag of node folio, in order to persist inconsistent node data to storage. | ||||
| CVE-2026-89838 | 1 Linux | 1 Linux Kernel | 2026-09-18 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: f2fs: limit recovery filename logging to stored length F2FS stores recovery filenames as a length plus a fixed-size i_name buffer. The buffer is not NUL-terminated, but recover_inode() and recover_dentry() print it with %s. For a 255-byte filename, recovery logging can read past i_name into the following raw inode fields. Print the name with a precision bounded by i_namelen and F2FS_NAME_LEN. | ||||
| CVE-2026-89840 | 1 Linux | 1 Linux Kernel | 2026-09-18 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: f2fs: validate MOVE_RANGE destination size F2FS_IOC_MOVE_RANGE checks the source range, but not the destination end before updating i_size. A source hole can expose this: __clone_blkaddrs() skips NULL_ADDR entries and returns success, so the caller can still extend the destination inode with unchecked pos_out + len. Reject destination overflow and use inode_newsize_ok() before extending the destination inode. | ||||
| CVE-2026-89841 | 1 Linux | 1 Linux Kernel | 2026-09-18 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: f2fs: only redirty pinned folios in redirty_blocks redirty_blocks() pins folios with read_cache_folio() and then walks the same range again with filemap_lock_folio() to redirty them and drop the references it took. Commit 5951fee46bef ("f2fs: Use a folio in redirty_blocks()") changed the second pass to a do/while loop. If read_cache_folio() fails before anything is pinned, page_idx does not advance but the cleanup loop still runs once. If readahead has already populated the failed folio in page cache, that extra iteration finds it and folio_put_refs(folio, 2) drops one reference too many. Later drop_caches or reclaim can then report "BUG: Bad page state". Only redirty the range that was pinned successfully. | ||||
| CVE-2026-89898 | 1 Linux | 1 Linux Kernel | 2026-09-18 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: media: cec: extron-da-hd-4k-plus: add sanity check Add check to prevent overflowing msg.msg[] in case the incoming data is malformed. | ||||
| CVE-2026-89943 | 1 Linux | 1 Linux Kernel | 2026-09-18 | 8.4 High |
| In the Linux kernel, the following vulnerability has been resolved: ASoC: loongson: Fix error handling in ACPI property parsing In loongson_card_parse_acpi(), the return value of device_property_read_string() for the `codec-dai-name` property was ignored. If the property is missing or invalid, an uninitialized pointer would be used later, potentially leading to undefined behavior. Fix this by checking the return value and propagating the error appropriately. | ||||
| CVE-2026-89885 | 1 Linux | 1 Linux Kernel | 2026-09-18 | 8.4 High |
| In the Linux kernel, the following vulnerability has been resolved: media: platform: mtk-mdp3: Fix SCP device refcounting mdp_probe() first tries to get the SCP handle with scp_get(). When that fails, it falls back to looking up the SCP platform device with __get_pdev_by_id() and then reads its driver data. The fallback lookup returns the platform device with a reference, just like scp_get() does. However, the fallback path currently drops that reference immediately after platform_get_drvdata(). The driver later still calls scp_put(mdp->scp) unconditionally from the probe error path and from mdp_video_device_release(), which drops the SCP device reference again. Keep the fallback reference until the existing scp_put() call, so that the fallback path follows the same ownership rules as the scp_get() path. | ||||
| CVE-2026-89888 | 1 Linux | 1 Linux Kernel | 2026-09-18 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: media: i2c: ov02a10: fix endpoint parsing use-after-free The ov02a10_check_hwcfg() function calls fwnode_handle_put(ep) immediately after allocating and parsing the endpoint. However, it subsequently calls fwnode_property_read_u32() using the same 'ep' handle, leading to a potential use-after-free. Additionally, reading the optional 'ovti,mipi-clock-voltage' property used to overwrite the 'ret' variable. If the property was missing, 'ret' would become negative, and this failure code would be incorrectly returned at the end of the function, causing probe to fail entirely. Fix the use-after-free by moving fwnode_property_read_u32() before the endpoint is parsed and freed. Avoid the error leak by not assigning the result of fwnode_property_read_u32() to 'ret'. | ||||