Export limit exceeded: 28606 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.

Search

Search Results (28606 CVEs found)

CVE Vendors Products Updated CVSS v3.1
CVE-2026-71937 1 Draytek 14 Vigorswitch Fx2120 Firmware, Vigorswitch G1282 Firmware, Vigorswitch G2100 Firmware and 11 more 2026-08-24 7.2 High
Multiple DrayTek VigorSwitch models contain a buffer overflow vulnerability in the poe_schedule_profile function. The vulnerability is caused by repeated concatenation of the start_date, start_time, duration_time, how_often, weekdays, monthly_date, and cycle_duration fields into small fixed-size buffers without proper length checks. A remote attacker can trigger this vulnerability via crafted input, causing a denial of service or potentially executing arbitrary commands. Exploitation requires valid administrative credentials for the device's web management interface.
CVE-2026-71935 1 Draytek 14 Vigorswitch Fx2120 Firmware, Vigorswitch G1282 Firmware, Vigorswitch G2100 Firmware and 11 more 2026-08-24 7.2 High
Multiple DrayTek VigorSwitch models contain a buffer overflow vulnerability in the webBackupAction function. The vulnerability is caused by repeated string concatenation of the pathN, valueN, key, and option fields into fixed-size stack buffers without total length checks. A remote attacker can trigger this vulnerability via crafted input, causing a denial of service or potentially executing arbitrary commands. Exploitation requires valid administrative credentials for the device's web management interface.
CVE-2026-68768 1 Hashcat 1 Hashcat 2026-08-24 6.1 Medium
hashcat contains a heap-based buffer overflow (out-of-bounds write) in the outfile_write() function in src/outfile.c. When assembling output into a fixed-size buffer (HCBUFSIZ_LARGE, ~16 MB), the function sequentially appends the username, separator, hash, and plaintext via memcpy without validating that the accumulated length stays within the buffer capacity. When run with --username --show against a crafted hash file containing an oversized username that nearly fills the buffer, the total assembled output exceeds the buffer, causing a heap buffer overflow that can corrupt memory and crash the process.
CVE-2026-78170 1 Utt 1 Hiper 1200gw 2026-08-24 8.8 High
A flaw has been found in UTT HiPER 1200GW up to 2.5.3-170306. Affected is the function strcpy of the file /goform/formConfigFastDirectionW. Executing a manipulation of the argument ssid can lead to buffer overflow. The attack may be performed from remote. The exploit has been published and may be used.
CVE-2026-78157 1 Open5gs 1 Open5gs 2026-08-24 7.4 High
A vulnerability was detected in Open5GS 2.8.0. This affects the function pcrf_rx_aar_cb of the file src/pcrf/pcrf-rx-path.c of the component Rx AA-Request Handler. Performing a manipulation results in out-of-bounds read. It is possible to initiate the attack remotely. The patch is named c18dc6938bf63cc7374315d3dca303d92066e746. To fix this issue, it is recommended to deploy a patch.
CVE-2020-9666 3 Adobe, Linux, Microsoft 3 Campaign, Linux Kernel, Windows 2026-08-24 5.5 Medium
Adobe Campaign Classic before 20.2 have an out-of-bounds read vulnerability. Successful exploitation could lead to information disclosure.
CVE-2026-50735 1 Enterprisedb 1 Pglogical 2026-08-24 6.8 Medium
pglogical's apply worker does not sufficiently validate the length of certain fields in incoming replication protocol messages before copying them, resulting in an out-of-bounds read. A party acting as the publisher for a subscription, for example a non-PostgreSQL endpoint that speaks the pglogical replication protocol, can return crafted messages that cause the subscriber's apply worker to read beyond the bounds of an allocated buffer, disclosing adjacent process memory or crashing the worker. To exploit the issue an attacker must be able to direct a subscription at an endpoint they control. In default installations this requires privileges normally reserved for a superuser, so the issue is most relevant to managed deployments where the ability to create subscriptions has been delegated to non-superuser roles.
CVE-2026-20679 1 Apple 1 Macos 2026-08-24 4.3 Medium
The issue was addressed with improved checks. This issue is fixed in macOS Sequoia 15.7.5, macOS Sonoma 14.8.5, macOS Tahoe 26.4. Processing a maliciously crafted file may lead to unexpected app termination.
CVE-2026-78050 1 Comfast 1 Cf-n1-s 2026-08-24 9.9 Critical
A vulnerability was found in Comfast CF-N1-S 2.6.0.1. The affected element is the function sub_41AD7C of the file /cgi-bin/mbox-config?method=SET&section=ntp_timezone of the component Web Management. The manipulation of the argument timestr/ntp_client_enabled results in stack-based buffer overflow. It is possible to launch the attack remotely. The exploit has been made public and could be used.
CVE-2026-16849 1 Ibm 3 Aix, Powervm Vios, Vios 2026-08-24 4.3 Medium
IBM AIX 7.2, and 7.3 and IBM PowerVM VIOS 4.1 could allow a remote attacker to cause a denial of service due to an improper check for an array index boundary.
CVE-2026-16833 1 Ibm 3 Aix, Powervm Vios, Vios 2026-08-24 5.3 Medium
IBM AIX 7.2, and 7.3 and IBM PowerVM VIOS 4.1 could allow a remote attacker to disclose kernel memory due to an out-of-bounds read.
CVE-2026-16839 1 Ibm 3 Aix, Powervm Vios, Vios 2026-08-24 9.4 Critical
IBM AIX 7.2, and 7.3 and IBM PowerVM VIOS 4.1 could allow a remote attacker to obtain sensitive information due to an integer underflow in the IPv4 IP-options parser.
CVE-2026-78169 1 Utt 1 Hiper 1250gw 2026-08-24 9.9 Critical
A vulnerability was detected in UTT HiPER 1250GW up to 3.2.7-210907-180535. This impacts the function strcpy of the file /goform/aspRemoteApConfTempSend of the component HTTP Request Handler. Performing a manipulation of the argument Profile results in stack-based buffer overflow. The attack is possible to be carried out remotely. The exploit is now public and may be used.
CVE-2026-74508 1 Linux 1 Linux Kernel 2026-08-23 8.8 High
In the Linux kernel, the following vulnerability has been resolved: Bluetooth: HIDP: reject frames without a transaction header hidp_recv_ctrl_frame() and hidp_recv_intr_frame() read skb->data[0] before checking that the L2CAP SDU contains a transaction header. A connected HIDP peer can send an empty basic-mode SDU and make both paths use an uninitialized byte from skb tailroom. KMSAN reports the use in hidp_session_run(), with the uninitialized value originating in __alloc_skb() through vhci_write(). The control path produces two reports and the interrupt path produces one. The byte can also be controlled by a malformed lower-layer packet. If an HCI ACL packet contains an L2CAP PDU with a declared zero-length payload followed by an extra 0x15 byte, l2cap_recv_acldata() reduces skb->len to the declared PDU length before dispatch. The current HIDP path nevertheless consumes the extra byte as HIDP_TRANS_HID_CONTROL | HIDP_CTRL_VIRTUAL_CABLE_UNPLUG and terminates the HIDP session. With this change, the same packet is discarded and a subsequent feature report request succeeds. Pull the transaction header with skb_pull_data() and discard frames that do not contain it.
CVE-2026-72236 1 Linux 1 Linux Kernel 2026-08-23 5.5 Medium
In the Linux kernel, the following vulnerability has been resolved: s390/perf_cpum_cf: Add missing array_index_nospec() to __hw_perf_event_init() ev variable is userspace controlled via event->attr.config and used as an array index after bounds checking, but without speculation barriers. Add the missing array_index_nospec() call to prevent speculative execution.
CVE-2026-68431 1 Linux 1 Linux Kernel 2026-08-23 9.1 Critical
In the Linux kernel, the following vulnerability has been resolved: ksmbd: validate minimum PDU size for transform requests The receive path applies the minimum SMB2 PDU size check only when ProtocolId is SMB2_PROTO_NUMBER. A packet carrying SMB2_TRANSFORM_PROTO_NUM bypasses the check even when the negotiated dialect does not provide transform handling. On an SMB 2.1 connection, a short transform packet therefore reaches init_smb2_rsp_hdr(), which interprets the request as a full SMB2 header and reads beyond the request allocation. The copied fields can then be returned to the unauthenticated client. Compression transforms are converted to ordinary SMB2 messages before protocol validation. After that conversion, validate ordinary SMB2 requests against SMB2_MIN_SUPPORTED_PDU_SIZE and require encryption transform requests to contain both a transform header and an SMB2 header. This rejects truncated requests before work allocation.
CVE-2026-68099 1 Linux 1 Linux Kernel 2026-08-23 5.9 Medium
In the Linux kernel, the following vulnerability has been resolved: ksmbd: restore DACL size on check_add_overflow() to avoid malformed ACL check_add_overflow() unconditionally writes the truncated sum into *d even on overflow, per its contract in include/linux/overflow.h. The four check_add_overflow() guards in set_posix_acl_entries_dacl() and set_ntacl_dacl() break out of the ACE-building loops on overflow, but the truncated *size is then consumed downstream at the end of set_ntacl_dacl(): pndacl->size = cpu_to_le16(le16_to_cpu(pndacl->size) + size); This produces an on-wire NT ACL whose pndacl->size under-reports the bytes actually written by the preceding fill_ace_for_sid()/memcpy() calls, yielding a malformed ACL that can trigger out-of-bounds reads when re-parsed by clients or ksmbd itself. Restore *size to its pre-addition value on each overflow branch (via `*size -= ace_sz` / `size -= nt_ace_size`) so that after the break, *size once again holds the cumulative size of the successfully-written ACEs. The committed ACL is then truncated-but-self-consistent rather than malformed. The ksmbd DACL builders are the only check_add_overflow() sites found where an overflow path breaks out of a loop and the destination value is consumed afterward. The other nearby break-style cases either return -EINVAL on overflow (transport_ipc.c) or break without consuming the overflowed destination value afterward (buildid.c).
CVE-2026-64269 1 Linux 1 Linux Kernel 2026-08-23 9.1 Critical
In the Linux kernel, the following vulnerability has been resolved: RDMA/rtrs-srv: Bound RDMA-Write length to chunk size in rdma_write_sg When the server answers an RTRS READ, rdma_write_sg() builds the source scatter/gather entry for the IB_WR_RDMA_WRITE that returns data to the peer. Its length is taken directly from the wire descriptor: plist->length = le32_to_cpu(id->rd_msg->desc[0].len); rd_msg points into the chunk buffer that the remote peer filled via RDMA-WRITE-WITH-IMM (rtrs_srv_rdma_done() -> process_io_req() -> process_read()), so desc[0].len is attacker-controlled and, before this change, was only rejected when zero. The source address is the fixed chunk start (dma_addr[msg_id]) and the source lkey is the PD-wide local_dma_lkey, which is not tied to the chunk's MR mapping, so the verbs layer does not constrain the transfer length to max_chunk_size. msg_id and off are bounded against queue_depth and max_chunk_size in rtrs_srv_rdma_done(), but desc[0].len is a separate field that was not checked against the chunk size. A peer that advertises desc[0].len larger than max_chunk_size can make the posted RDMA write read past the chunk's mapped region. The resulting behaviour depends on the IOMMU configuration: with no IOMMU or in passthrough mode the read may extend into memory adjacent to the chunk and be returned to the peer, which can disclose host memory; with a translating IOMMU the out-of-range access is expected to fault and abort the connection. In either case the transfer exceeds what the protocol permits and is driven by a remote peer. Reject a descriptor length above max_chunk_size, mirroring the existing off >= max_chunk_size bound in rtrs_srv_rdma_done(). Legitimate clients do not exceed it: the client sets desc[0].len to its MR length, which is capped at the negotiated max_io_size (max_chunk_size - MAX_HDR_SIZE).
CVE-2026-72156 1 Linux 1 Linux Kernel 2026-08-22 5.5 Medium
In the Linux kernel, the following vulnerability has been resolved: fpga: microchip-spi: fix zero header_size OOB read in mpf_ops_parse_header() mpf_ops_parse_header() reads header_size from the bitstream at MPF_HEADER_SIZE_OFFSET (24). When header_size is zero, the expression *(buf + header_size - 1) reads one byte before the buffer start. Since initial_header_size is set to 71 in mpf_ops, the fpga-mgr core guarantees the buffer is large enough to reach MPF_HEADER_SIZE_OFFSET. The only real gap is the zero header_size case, which cannot be resolved by providing a larger buffer, so return -EINVAL.
CVE-2026-72204 1 Linux 1 Linux Kernel 2026-08-22 8.4 High
In the Linux kernel, the following vulnerability has been resolved: ntfs: centalize $INDEX_ROOT header validation Add a dedicated helper to perform stricter validation of $INDEX_ROOT and use it for both directory inodes and named index inodes. This keeps the root size and header geometry checks consistent across both read paths.