Export limit exceeded: 353632 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 353632 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (353632 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-45943 | 1 Linux | 1 Linux Kernel | 2026-05-27 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: erofs: fix inline data read failure for ztailpacking pclusters Compressed folios for ztailpacking pclusters must be valid before adding these pclusters to I/O chains. Otherwise, z_erofs_decompress_pcluster() may assume they are already valid and then trigger a NULL pointer dereference. It is somewhat hard to reproduce because the inline data is in the same block as the tail of the compressed indexes, which are usually read just before. However, it may still happen if a fatal signal arrives while read_mapping_folio() is running, as shown below: erofs: (device dm-1): z_erofs_pcluster_begin: failed to get inline data -4 Unable to handle kernel NULL pointer dereference at virtual address 0000000000000008 ... pc : z_erofs_decompress_queue+0x4c8/0xa14 lr : z_erofs_decompress_queue+0x160/0xa14 sp : ffffffc08b3eb3a0 x29: ffffffc08b3eb570 x28: ffffffc08b3eb418 x27: 0000000000001000 x26: ffffff8086ebdbb8 x25: ffffff8086ebdbb8 x24: 0000000000000001 x23: 0000000000000008 x22: 00000000fffffffb x21: dead000000000700 x20: 00000000000015e7 x19: ffffff808babb400 x18: ffffffc089edc098 x17: 00000000c006287d x16: 00000000c006287d x15: 0000000000000004 x14: ffffff80ba8f8000 x13: 0000000000000004 x12: 00000006589a77c9 x11: 0000000000000015 x10: 0000000000000000 x9 : 0000000000000000 x8 : 0000000000000000 x7 : 0000000000000000 x6 : 000000000000003f x5 : 0000000000000040 x4 : ffffffffffffffe0 x3 : 0000000000000020 x2 : 0000000000000008 x1 : 0000000000000000 x0 : 0000000000000000 Call trace: z_erofs_decompress_queue+0x4c8/0xa14 z_erofs_runqueue+0x908/0x97c z_erofs_read_folio+0x128/0x228 filemap_read_folio+0x68/0x128 filemap_get_pages+0x44c/0x8b4 filemap_read+0x12c/0x5b8 generic_file_read_iter+0x4c/0x15c do_iter_readv_writev+0x188/0x1e0 vfs_iter_read+0xac/0x1a4 backing_file_read_iter+0x170/0x34c ovl_read_iter+0xf0/0x140 vfs_read+0x28c/0x344 ksys_read+0x80/0xf0 __arm64_sys_read+0x24/0x34 invoke_syscall+0x60/0x114 el0_svc_common+0x88/0xe4 do_el0_svc+0x24/0x30 el0_svc+0x40/0xa8 el0t_64_sync_handler+0x70/0xbc el0t_64_sync+0x1bc/0x1c0 Fix this by reading the inline data before allocating and adding the pclusters to the I/O chains. | ||||
| CVE-2026-45947 | 1 Linux | 1 Linux Kernel | 2026-05-27 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: Fix memory leak in amdgpu_acpi_enumerate_xcc() In amdgpu_acpi_enumerate_xcc(), if amdgpu_acpi_dev_init() returns -ENOMEM, the function returns directly without releasing the allocated xcc_info, resulting in a memory leak. Fix this by ensuring that xcc_info is properly freed in the error paths. Compile tested only. Issue found using a prototype static analysis tool and code review. | ||||
| CVE-2026-45949 | 1 Linux | 1 Linux Kernel | 2026-05-27 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: hwrng: core - use RCU and work_struct to fix race condition Currently, hwrng_fill is not cleared until the hwrng_fillfn() thread exits. Since hwrng_unregister() reads hwrng_fill outside the rng_mutex lock, a concurrent hwrng_unregister() may call kthread_stop() again on the same task. Additionally, if hwrng_unregister() is called immediately after hwrng_register(), the stopped thread may have never been executed. Thus, hwrng_fill remains dirty even after hwrng_unregister() returns. In this case, subsequent calls to hwrng_register() will fail to start new threads, and hwrng_unregister() will call kthread_stop() on the same freed task. In both cases, a use-after-free occurs: refcount_t: addition on 0; use-after-free. WARNING: ... at lib/refcount.c:25 refcount_warn_saturate+0xec/0x1c0 Call Trace: kthread_stop+0x181/0x360 hwrng_unregister+0x288/0x380 virtrng_remove+0xe3/0x200 This patch fixes the race by protecting the global hwrng_fill pointer inside the rng_mutex lock, so that hwrng_fillfn() thread is stopped only once, and calls to kthread_run() and kthread_stop() are serialized with the lock held. To avoid deadlock in hwrng_fillfn() while being stopped with the lock held, we convert current_rng to RCU, so that get_current_rng() can read current_rng without holding the lock. To remove the lock from put_rng(), we also delay the actual cleanup into a work_struct. Since get_current_rng() no longer returns ERR_PTR values, the IS_ERR() checks are removed from its callers. With hwrng_fill protected by the rng_mutex lock, hwrng_fillfn() can no longer clear hwrng_fill itself. Therefore, if hwrng_fillfn() returns directly after current_rng is dropped, kthread_stop() would be called on a freed task_struct later. To fix this, hwrng_fillfn() calls schedule() now to keep the task alive until being stopped. The kthread_stop() call is also moved from hwrng_unregister() to drop_current_rng(), ensuring kthread_stop() is called on all possible paths where current_rng becomes NULL, so that the thread would not wait forever. | ||||
| CVE-2026-45962 | 1 Linux | 1 Linux Kernel | 2026-05-27 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: ublk: Validate SQE128 flag before accessing the cmd ublk_ctrl_cmd_dump() accesses (header *)sqe->cmd before IO_URING_F_SQE128 flag check. This could cause out of boundary memory access. Move the SQE128 flag check earlier in ublk_ctrl_uring_cmd() to return -EINVAL immediately if the flag is not set. | ||||
| CVE-2026-46020 | 1 Linux | 1 Linux Kernel | 2026-05-27 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: mm/damon/core: validate damos_quota_goal->nid for node_mem_{used,free}_bp Patch series "mm/damon/core: validate damos_quota_goal->nid". node_mem[cg]_{used,free}_bp DAMOS quota goals receive the node id. The node id is used for si_meminfo_node() and NODE_DATA() without proper validation. As a result, privileged users can trigger an out of bounds memory access using DAMON_SYSFS. Fix the issues. The issue was originally reported [1] with a fix by another author. The original author announced [2] that they will stop working including the fix that was still in the review stage. Hence I'm restarting this. This patch (of 2): Users can set damos_quota_goal->nid with arbitrary value for node_mem_{used,free}_bp. But DAMON core is using those for si_meminfo_node() without the validation of the value. This can result in out of bounds memory access. The issue can actually triggered using DAMON user-space tool (damo), like below. $ sudo ./damo start --damos_action stat \ --damos_quota_goal node_mem_used_bp 50% -1 \ --damos_quota_interval 1s $ sudo dmesg [...] [ 65.565986] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000098 Fix this issue by adding the validation of the given node. If an invalid node id is given, it returns 0% for used memory ratio, and 100% for free memory ratio. | ||||
| CVE-2026-45960 | 1 Linux | 1 Linux Kernel | 2026-05-27 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: hfsplus: return error when node already exists in hfs_bnode_create When hfs_bnode_create() finds that a node is already hashed (which should not happen in normal operation), it currently returns the existing node without incrementing its reference count. This causes a reference count inconsistency that leads to a kernel panic when the node is later freed in hfs_bnode_put(): kernel BUG at fs/hfsplus/bnode.c:676! BUG_ON(!atomic_read(&node->refcnt)) This scenario can occur when hfs_bmap_alloc() attempts to allocate a node that is already in use (e.g., when node 0's bitmap bit is incorrectly unset), or due to filesystem corruption. Returning an existing node from a create path is not normal operation. Fix this by returning ERR_PTR(-EEXIST) instead of the node when it's already hashed. This properly signals the error condition to callers, which already check for IS_ERR() return values. | ||||
| CVE-2026-45996 | 1 Linux | 1 Linux Kernel | 2026-05-27 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: spi: imx: fix use-after-free on unbind The SPI subsystem frees the controller and any subsystem allocated driver data as part of deregistration (unless the allocation is device managed). Take another reference before deregistering the controller so that the driver data is not freed until the driver is done with it. | ||||
| CVE-2026-45997 | 1 Linux | 1 Linux Kernel | 2026-05-27 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: scsi: sd: fix missing put_disk() when device_add(&disk_dev) fails If device_add(&sdkp->disk_dev) fails, put_device() runs scsi_disk_release(), which frees the scsi_disk but leaves the gendisk referenced. The device_add_disk() error path in sd_probe() calls put_disk(gd); call put_disk(gd) here to mirror that cleanup. | ||||
| CVE-2026-46001 | 1 Linux | 1 Linux Kernel | 2026-05-27 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: hwmon: (pt5161l) Fix bugs in pt5161l_read_block_data() Fix two bugs in pt5161l_read_block_data(): 1. Buffer overrun: The local buffer rbuf is declared as u8 rbuf[24], but i2c_smbus_read_block_data() can return up to I2C_SMBUS_BLOCK_MAX (32) bytes. The i2c-core copies the data into the caller's buffer before the return value can be checked, so the post-read length validation does not prevent a stack overrun if a device returns more than 24 bytes. Resize the buffer to I2C_SMBUS_BLOCK_MAX. 2. Unexpected positive return on length mismatch: When all three retries are exhausted because the device returns data with an unexpected length, i2c_smbus_read_block_data() returns a positive byte count. The function returns this directly, and callers treat any non-negative return as success, processing stale or incomplete buffer contents. Return -EIO when retries are exhausted with a positive return value, preserving the negative error code on I2C failure. | ||||
| CVE-2026-45322 | 2026-05-27 | 7.8 High | ||
| Microsoft UFO open-source framework for intelligent automation across devices and platforms. Microsoft UFO tagged releases up to and including v3.0.0 contain an OS command injection vulnerability in the shell action replay path. In affected releases, ShellReceiver.run_shell() passes a command string from action parameters directly to subprocess.Popen() with shell=True and executable=powershell.exe. The same shell-execution behavior is also reachable through ShellReceiver.execute_command(). The shell receiver is invoked by action classes such as RunShellCommand.execute() and ExecuteCommand.execute(), which forward stored action parameters to the shell receiver. Because UFO stores planned and executed actions in per-session JSON records, an attacker who can write or modify a session/action JSON file can plant a shell action. When the session is resumed or replayed, UFO executes the attacker's command as the UFO process user. | ||||
| CVE-2026-46089 | 1 Linux | 1 Linux Kernel | 2026-05-27 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: zram: do not forget to endio for partial discard requests As reported by Qu Wenruo and Avinesh Kumar, the following getconf PAGESIZE 65536 blkdiscard -p 4k /dev/zram0 takes literally forever to complete. zram doesn't support partial discards and just returns immediately w/o doing any discard work in such cases. The problem is that we forget to endio on our way out, so blkdiscard sleeps forever in submit_bio_wait(). Fix this by jumping to end_bio label, which does bio_endio(). | ||||
| CVE-2026-46094 | 1 Linux | 1 Linux Kernel | 2026-05-27 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ext4: fix bounds check in check_xattrs() to prevent out-of-bounds access The bounds check for the next xattr entry in check_xattrs() uses (void *)next >= end, which allows next to point within sizeof(u32) bytes of end. On the next loop iteration, IS_LAST_ENTRY() reads 4 bytes via *(__u32 *)(entry), which can overrun the valid xattr region. For example, if next lands at end - 1, the check passes since next < end, but IS_LAST_ENTRY() reads 4 bytes starting at end - 1, accessing 3 bytes beyond the valid region. Fix this by changing the check to (void *)next + sizeof(u32) > end, ensuring there is always enough space for the IS_LAST_ENTRY() read on the subsequent iteration. | ||||
| CVE-2026-45986 | 1 Linux | 1 Linux Kernel | 2026-05-27 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: crypto: ccree - fix a memory leak in cc_mac_digest() Add cc_unmap_result() if cc_map_hash_request_final() fails to prevent potential memory leak. | ||||
| CVE-2026-45993 | 1 Linux | 1 Linux Kernel | 2026-05-27 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: LoongArch: Add spectre boundry for syscall dispatch table The LoongArch syscall number is directly controlled by userspace, but does not have a array_index_nospec() boundry to prevent access past the syscall function pointer tables. | ||||
| CVE-2026-49103 | 1 Webmin | 1 Webmin | 2026-05-27 | N/A |
| Webmin before 2.640 does not safely construct a filename for saving of an attachment within the mailboxes component. This occurs in mailboxes/detachall.cgi. | ||||
| CVE-2026-45152 | 2026-05-27 | 7.8 High | ||
| uniget is a universal installer and updater for (container) tools. Prior to 0.27.1, a command injection vulnerability exists in uniget due to unsafe execution of the check field from metadata files using /bin/bash -c. Because the check field is loaded directly from untrusted JSON metadata without validation or sanitization, an attacker can craft malicious metadata that executes arbitrary shell commands on the victim’s system when common uniget operations such as describe, install, update, or inspect are performed. This vulnerability can lead to arbitrary code execution with the privileges of the user running uniget. This vulnerability is fixed in 0.27.1. | ||||
| CVE-2026-45955 | 1 Linux | 1 Linux Kernel | 2026-05-27 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: md/md-llbitmap: fix percpu_ref not resurrected on suspend timeout When llbitmap_suspend_timeout() times out waiting for percpu_ref to become zero, it returns -ETIMEDOUT without resurrecting the percpu_ref. The caller (md_llbitmap_daemon_fn) then continues to the next page without calling llbitmap_resume(), leaving the percpu_ref in a killed state permanently. Fix this by resurrecting the percpu_ref before returning the error, ensuring the page control structure remains usable for subsequent operations. | ||||
| CVE-2026-45979 | 1 Linux | 1 Linux Kernel | 2026-05-27 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: clean up the amdgpu_cs_parser_bos In low memory conditions, kmalloc can fail. In such conditions unlock the mutex for a clean exit. We do not need to amdgpu_bo_list_put as it's been handled in the amdgpu_cs_parser_fini. | ||||
| CVE-2026-44247 | 2026-05-27 | 6.8 Medium | ||
| Volcano is a Kubernetes-native batch scheduling system. Prior to v1.14.2, v1.13.3, and v1.12.4, the Volcano webhook server does not enforce a size limit on incoming HTTP request bodies. Any in-cluster pod that can reach the webhook endpoint may send an arbitrarily large request body, potentially causing the webhook server to be killed by OOM. All Volcano deployments with the webhook server exposed to in-cluster traffic are affected. This vulnerability is fixed in v1.14.2, v1.13.3, and v1.12.4. | ||||
| CVE-2026-1402 | 1 Gitlab | 1 Gitlab | 2026-05-27 | 6.5 Medium |
| GitLab has remediated an issue in GitLab CE/EE affecting all versions from 17.1 before 18.10.7, 18.11 before 18.11.4, and 19.0 before 19.0.1 that under certain conditions could have allowed an authenticated user to cause denial of service due to insufficient validation. | ||||