Export limit exceeded: 380442 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (380442 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-72462 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: apparmor: fix race in unix socket mediation when peer_path is used The holding a reference to the peer_sk is not enough to ensure access to the peer sk path. Accessing the path outside of the state lock allows for a race with unix_release_sock(). Fix this by taking the state lock and getting a reference to the path under lock. Ideally for connected sockets we would cache this information so we don't have to take the lock here. But for now just fix the race. | ||||
| CVE-2026-72446 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: usb-audio: qcom: reject stream disable with no active interface handle_uaudio_stream_req() resolves an interface index with info_idx_from_ifnum(), which returns -EINVAL when no interface matches. The enable branch and the response: cleanup label both guard against a negative index, but the disable branch does not: it forms info = &uadev[pcm_card_num].info[info_idx] and dereferences it. uadev[].info is a pointer allocated only when a stream is first enabled, so a negative info_idx on the disable path is unsafe in two ways: - If the card was never enabled, .info is NULL and &info[-EINVAL] is a wild pointer; reading info->data_ep_pipe faults (kernel oops). - If the card was enabled at least once (.info allocated) and the disable names an interface that does not match, &info[-EINVAL] points before the allocation; info->data_ep_pipe / info->sync_ep_pipe are an out-of-bounds slab read and, when non-zero, an out-of-bounds 4-byte write (both pipe fields are cleared to 0). That is memory corruption, not just a NULL dereference. The request is reachable from unprivileged local userspace over AF_QIPCRTR. Reject a disable request with no resolved interface, matching the guard the enable path already has. | ||||
| CVE-2026-72425 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: ice: fix FDIR CTRL VSI resource leak in ice_reset_all_vfs() Resetting all VFs causes resource leak on VFs with FDIR filters enabled as CTRL VSIs are only invalidated and not freed. Fix by using ice_vf_ctrl_vsi_release() instead of ice_vf_ctrl_invalidate_vsi() which aligns behavior with the ice_reset_vf() function. Reproduction: echo 1 > /sys/class/net/$pf/device/sriov_numvfs ethtool -N $vf flow-type ether proto 0x9000 action 0 echo 1 > /sys/class/net/$pf/device/reset | ||||
| CVE-2026-72412 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 9.3 Critical |
| In the Linux kernel, the following vulnerability has been resolved: s390/mm: Fix handling of _PAGE_UNUSED pte bit The _PAGE_UNUSED softbit should not really be lying around. Its sole purpose is to signal to try_to_unmap_one() and try_to_migrate_one() that the page can be discarded instead of being moved / swapped. KVM has no way to know why a page is being unmapped, so it sets the bit on userspace ptes corresponding to unused guest pages every time they get unmapped. KVM has no reasonable way to clear the bit once the page is in use again. While set_ptes() checks and clears the bit, other paths that set new ptes did not. This led to used pages being thrown out as if they were unused, causing guest corruption. Fix the issue by clearing the _PAGE_UNUSED bit for present ptes in set_pte(), i.e. whenever a present pte is getting set. The check in set_ptes() is then redundant and can be removed. Also fix gmap_helper_try_set_pte_unused() to only set the bit if the pte is present; the _PAGE_UNUSED bit is only defined for present ptes and thus should not be set for non-present ptes. | ||||
| CVE-2026-72407 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 10 Critical |
| In the Linux kernel, the following vulnerability has been resolved: geneve: validate inner network offset in geneve_gro_complete() Even with both paths gated on gs->gro_hint, geneve_gro_complete() re-derives the inner dispatch type and length from the packet and the current gs->gro_hint, independently of geneve_gro_receive(). The two can disagree if gs->gro_hint flips under a concurrent geneve_quiesce()/ geneve_unquiesce() (sk_user_data is NULL across a synchronize_net()), or if the re-read option bytes differ from the ones receive parsed. geneve_gro_receive() already records the inner network header position in NAPI_GRO_CB()->inner_network_offset. Have geneve_gro_complete() compute the offset it is about to dispatch at, adding ETH_HLEN in the ETH_P_TEB case where eth_gro_complete() steps over the inner MAC header, and bail out if it lands past inner_network_offset. Use a lower bound rather than exact equality: between gh_len and the inner L3 header, geneve_gro_receive() may also have pulled an inner VLAN tag (vlan_gro_receive() advances the recorded offset past it), which only moves inner_network_offset further out. A valid frame therefore always satisfies inner_nh <= inner_network_offset, while a gh_len inflated by a hint gro_receive() did not honour dispatches past the validated inner header, i.e. the out-of-bounds completion. Only the latter is rejected. | ||||
| CVE-2026-72378 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: afs: Fix error code in afs_extract_vl_addrs() The error codes on these paths are only set on the first iteration through the loop. Set the correct error code on every iteration. | ||||
| CVE-2026-72364 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: netfs: Fix writeback error handling Fix the error handling in writeback_iter() loop. If an error occurs, writeback_iter() needs to be called again with *error set to the error so that it can clean up iteration state. Further, the current folio needs unlocking and redirtying. | ||||
| CVE-2026-72357 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: uprobes/x86: Use proper mm_struct in __in_uprobe_trampoline In the unregister path we use __in_uprobe_trampoline check with current->mm for the VMA lookup, which is wrong, because we are in the tracer context, not the traced process. Add mm_struct pointer argument to __in_uprobe_trampoline and changing related callers to pass proper mm_struct pointer. | ||||
| CVE-2026-72354 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ntfs: avoid stale runlist element dereference in MFT writeback ntfs_write_mft_block() maps each $MFT record through the $MFT data runlist. For sub-folio clusters it looks up a struct runlist_element under ni->runlist.lock, drops the lock, and later uses rl->length and rl->vcn when choosing folio_sz. That pointer is only borrowed from ni->runlist.rl. Concurrent $MFT allocation extension can merge a replacement runlist under the same lock, and ntfs_rl_realloc() can free the old backing array. If that happens between the lookup and the later folio_sz decision, writeback can dereference freed runlist storage. The buggy scenario involves two paths, with each column showing the order within that path: MFT writeback path: $MFT allocation extension: 1. Look up rl under 1. Extend the $MFT data allocation. ni->runlist.lock. 2. Publish a replacement runlist. 2. Drop ni->runlist.lock. 3. Free the old runlist array. 3. Read rl->length and rl->vcn to choose folio_sz. Compute the remaining run length while ni->runlist.lock is still held, and use that scalar after unlock. This preserves the existing folio sizing decision without carrying a borrowed runlist_element across the lock boundary. Validation reproduced this kernel report: BUG: KASAN: slab-use-after-free in ntfs_mft_writepages+0x1c8d/0x1fb0 Call Trace: <TASK> dump_stack_lvl+0x66/0xa0 print_report+0xce/0x630 ? ntfs_mft_writepages+0x1c8d/0x1fb0 ? srso_alias_return_thunk+0x5/0xfbef5 ? __virt_addr_valid+0x20d/0x410 ? ntfs_mft_writepages+0x1c8d/0x1fb0 kasan_report+0xe0/0x110 ? ntfs_mft_writepages+0x1c8d/0x1fb0 ntfs_mft_writepages+0x1c8d/0x1fb0 ? __pfx_ntfs_mft_writepages+0x10/0x10 ? __pfx___mutex_unlock_slowpath+0x10/0x10 ? srso_alias_return_thunk+0x5/0xfbef5 ? iput+0x92/0xa80 do_writepages+0x219/0x530 ? __pfx_do_writepages+0x10/0x10 __writeback_single_inode+0x117/0xf50 ? do_raw_spin_lock+0x130/0x270 ? __pfx_do_raw_spin_lock+0x10/0x10 ? __pfx___writeback_single_inode+0x10/0x10 ? srso_alias_return_thunk+0x5/0xfbef5 writeback_sb_inodes+0x65b/0x1810 ? srso_alias_return_thunk+0x5/0xfbef5 ? lock_acquire+0x2b8/0x2f0 ? __pfx_writeback_sb_inodes+0x10/0x10 ? lock_release+0x1e0/0x280 ? _raw_spin_unlock+0x23/0x40 ? move_expired_inodes+0x2b8/0x850 __writeback_inodes_wb+0xf4/0x270 ? __pfx___writeback_inodes_wb+0x10/0x10 ? srso_alias_return_thunk+0x5/0xfbef5 ? queue_io+0x2e4/0x410 wb_writeback+0x666/0x880 ? srso_alias_return_thunk+0x5/0xfbef5 ? __pfx_wb_writeback+0x10/0x10 ? srso_alias_return_thunk+0x5/0xfbef5 ? srso_alias_return_thunk+0x5/0xfbef5 ? get_nr_dirty_inodes+0x1c/0x170 wb_workfn+0x75e/0xbb0 ? srso_alias_return_thunk+0x5/0xfbef5 ? _raw_spin_unlock_irqrestore+0x27/0x60 ? __pfx_wb_workfn+0x10/0x10 ? __pfx_debug_object_deactivate+0x10/0x10 ? lock_acquire+0x2b8/0x2f0 ? srso_alias_return_thunk+0x5/0xfbef5 ? lock_release+0x1e0/0x280 process_one_work+0x8d0/0x1870 ? __pfx_process_one_work+0x10/0x10 ? srso_alias_return_thunk+0x5/0xfbef5 worker_thread+0x575/0xf80 ? __pfx_worker_thread+0x10/0x10 kthread+0x2e7/0x3c0 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x576/0x810 ? __pfx_ret_from_fork+0x10/0x10 ? srso_alias_return_thunk+0x5/0xfbef5 ? __switch_to+0x57e/0xe10 ? __switch_to_asm+0x33/0x70 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1a/0x30 </TASK> Allocated by task 970: kasan_save_stack+0x33/0x60 kasan_save_track+0x14/0x30 __kasan_kmalloc+0xaa/0xb0 __kvmalloc_node_noprof+0x353/0x920 ntfs_rl_realloc+0x3c/0x80 ntfs_runlists_merge+0x1212/0x3010 ntfs_mft_data_extend_allocation_nolock+0x3e0/0x1f40 ntfs_mft_record_alloc+0x1ab4/0x4f10 __ntfs_create+0x680/0x2e50 ntfs_create+0x1e6/0x3a0 path_openat+0x2b55/0x3c10 do_file_open+0x1f4/0x460 do_sys_openat2+0xde/0x170 __x64_sys_openat+0x122/0x1e0 do_syscall_64+0x115/0x6a0 entry_SYSCALL_64_after_hwframe+0x77/0x7f Freed by task 1294: kasan_save_ ---truncated--- | ||||
| CVE-2026-72353 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ntfs: avoid stale runlist element dereference in fallocate ntfs_attr_fallocate() allocates holes and delayed allocations inside initialized size by looking up the current runlist element under ni->runlist.lock. The returned struct runlist_element is only a borrowed pointer into ni->runlist.rl. A writer can replace and free that array after the read lock is dropped, so later reads of rl->lcn, rl->length and rl->vcn can touch freed memory. The buggy scenario involves two paths, with each column showing the order within that path: ntfs_attr_fallocate(): 1. Take ni->runlist.lock for read. 2. Get rl from ntfs_attr_find_vcn_nolock(). 3. Drop ni->runlist.lock. 4. Read rl->lcn, rl->length and rl->vcn. mmap page_mkwrite: 1. Enter ntfs_filemap_page_mkwrite(). 2. Reach __ntfs_write_iomap_begin() and ntfs_attr_map_cluster(). 3. Merge allocation state with ntfs_runlists_merge(). 4. Reallocate ni->runlist.rl in ntfs_rl_realloc(), freeing the old array. Validation reproduced this kernel report: BUG: KASAN: slab-use-after-free in ntfs_attr_fallocate+0xbb8/0xd00 Call Trace: <TASK> dump_stack_lvl+0x66/0xa0 print_report+0xce/0x630 ? ntfs_attr_fallocate+0xbb8/0xd00 ? srso_alias_return_thunk+0x5/0xfbef5 ? __virt_addr_valid+0x20d/0x410 ? ntfs_attr_fallocate+0xbb8/0xd00 kasan_report+0xe0/0x110 ? ntfs_attr_fallocate+0xbb8/0xd00 ntfs_attr_fallocate+0xbb8/0xd00 ? lock_acquire+0x2b8/0x2f0 ? __pfx_ntfs_attr_fallocate+0x10/0x10 ? 0xffffffffc0000095 ? down_write+0x10d/0x1e0 ntfs_fallocate+0x5c9/0x1d00 ? __pfx_ntfs_fallocate+0x10/0x10 ? srso_alias_return_thunk+0x5/0xfbef5 ? lock_acquire+0x2b8/0x2f0 ? srso_alias_return_thunk+0x5/0xfbef5 ? selinux_file_permission+0x3a7/0x510 vfs_fallocate+0x29d/0xd30 __x64_sys_fallocate+0xc7/0x150 ? do_syscall_64+0x81/0x6a0 do_syscall_64+0x115/0x6a0 entry_SYSCALL_64_after_hwframe+0x77/0x7f Allocated by task 410: kasan_save_stack+0x33/0x60 kasan_save_track+0x14/0x30 __kasan_kmalloc+0xaa/0xb0 __kvmalloc_node_noprof+0x353/0x920 ntfs_rl_realloc+0x3f/0x110 ntfs_runlists_merge+0xaa3/0x3010 ntfs_attr_map_cluster+0x4e5/0xf80 ntfs_attr_fallocate+0x53f/0xd00 ntfs_fallocate+0x5c9/0x1d00 vfs_fallocate+0x29d/0xd30 __x64_sys_fallocate+0xc7/0x150 do_syscall_64+0x115/0x6a0 entry_SYSCALL_64_after_hwframe+0x77/0x7f Freed by task 424: kasan_save_stack+0x33/0x60 kasan_save_track+0x14/0x30 kasan_save_free_info+0x3b/0x60 __kasan_slab_free+0x5f/0x80 kfree+0x307/0x580 ntfs_rl_realloc+0x6f/0x110 ntfs_runlists_merge+0x7b1/0x3010 ntfs_attr_map_cluster+0x4e5/0xf80 __ntfs_write_iomap_begin+0x8cd/0x2280 iomap_iter+0x6de/0x11e0 iomap_page_mkwrite+0x391/0x650 ntfs_filemap_page_mkwrite+0x1ac/0x400 do_page_mkwrite+0x15c/0x280 __handle_mm_fault+0xd6d/0x1ca0 handle_mm_fault+0x19c/0x470 do_user_addr_fault+0x23b/0x9c0 exc_page_fault+0x5c/0xc0 asm_exc_page_fault+0x26/0x30 Fix this by copying the needed runlist fields while the read lock is still held and using only those scalar snapshots after unlocking. After the snapshot, ntfs_attr_map_cluster() can also find that the range is already mapped and return balloc=false. Only call ntfs_dio_zero_range() when new clusters were allocated, matching the write iomap path and preserving the zero-newly-allocated-holes behavior. | ||||
| CVE-2026-72350 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: xt_u32: reject invalid shift counts u32_match_it() executes rule-supplied shift operands on a 32-bit value. A malformed u32 rule can provide a shift count of 32 or more, triggering an undefined shift out-of-bounds during packet evaluation. Validate XT_U32_LEFTSH and XT_U32_RIGHTSH operands in u32_mt_checkentry() and reject malformed rules before they reach the packet path. | ||||
| CVE-2026-72348 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 9.1 Critical |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: ip6tables: mark malformed IPv6 extension headers for hotdrop The ah, hbh and rt matches check that the fixed extension header is present, then use the header length field to derive the advertised extension header length for matching. For the ah match, add the missing advertised-length check. For hbh and rt, update the existing advertised-length checks. In all three cases, set hotdrop to true before returning false when the advertised extension header length exceeds the available skb data. Returning false treats the packet as a rule mismatch. Set hotdrop to true and drop malformed packets so they cannot bypass rules intended to drop packets with these IPv6 extension headers. | ||||
| CVE-2026-72343 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 8.4 High |
| In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: Fix HV VHCA stats zero-sized buffer allocation mlx5e_hv_vhca_stats_create() is called from mlx5e_nic_enable(), before mlx5e_open(). At that point priv->stats_nch is still zero, because it is only ever incremented in mlx5e_channel_stats_alloc(), which is reached only from mlx5e_open_channel(). mlx5e_hv_vhca_stats_buf_size() therefore returns 0, and kvzalloc(0, GFP_KERNEL) returns ZERO_SIZE_PTR ((void *)16) rather than NULL. The "if (!buf)" guard does not catch this, and mlx5e_hv_vhca_stats_create() completes "successfully" with priv->stats_agent.buf set to ZERO_SIZE_PTR. Once channels are opened (priv->stats_nch > 0) and the hypervisor enables stats reporting, mlx5e_hv_vhca_stats_work() recomputes buf_len using the new non-zero stats_nch and calls memset(buf, 0, buf_len) on ZERO_SIZE_PTR, faulting at address 0x10. Allocate the buffer based on priv->max_nch, which is set in mlx5e_priv_init() and is the upper bound on stats_nch: - Add a separate helper mlx5e_hv_vhca_stats_buf_max_size() that returns sizeof(per_ring_stats) * max(max_nch, stats_nch), and use it for the kvzalloc() in mlx5e_hv_vhca_stats_create(). - Keep mlx5e_hv_vhca_stats_buf_size() (which returns based on stats_nch) for the worker's active payload size, so the wire format (block->rings = stats_nch) and the amount of data filled by mlx5e_hv_vhca_fill_stats() are unchanged. The max(max_nch, stats_nch) guard handles the rare case where mlx5e_attach_netdev() recomputes max_nch downward across a detach/resume cycle while priv->stats_nch persists (mlx5e_detach_netdev does not call mlx5e_priv_cleanup, so stats_nch is only reset when the netdev is destroyed). Without the guard, the worker could compute buf_len from stats_nch and overrun the smaller buffer allocated based on the reduced max_nch. Allocating a non-zero buffer also makes the kvzalloc() failure path in mlx5e_hv_vhca_stats_create() reachable for the first time: it returns early without (re)creating the agent. Clear priv->stats_agent.{agent,buf} in mlx5e_hv_vhca_stats_destroy() after freeing them, so that if a later create() bails out on this path, a subsequent teardown does not double-free the stale agent/buffer left from a previous enable/disable cycle. This mirrors the existing mlx5e pattern of preallocating arrays of size max_nch (e.g. priv->channel_stats) and lazily populating entries up to stats_nch on demand. | ||||
| CVE-2026-72099 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: dm-integrity: don't increment hash_offset twice hash_offset is already incremented in the loop "for (i = 0; i < to_copy; i++, ts--)". Do not increment it again. | ||||
| CVE-2026-68476 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: ipvs: reload ip header after head reallocation __ip_vs_get_out_rt() calls skb_ensure_writable() which may reallocate skb->head. | ||||
| CVE-2025-6666 | 1 Motogadget | 1 Mo.lock Ignition Lock | 2026-08-17 | 2 Low |
| A vulnerability was determined in motogadget mo.lock Ignition Lock up to 20251125. Affected by this vulnerability is an unknown functionality of the component NFC Handler. Executing a manipulation can lead to use of hard-coded cryptographic key . The physical device can be targeted for the attack. A high complexity level is associated with this attack. The exploitation appears to be difficult. The vendor was contacted early about this disclosure but did not respond in any way. | ||||
| CVE-2026-19987 | 1 Sourcecodester | 1 Best Employee Management System | 2026-08-17 | 5.3 Medium |
| A security vulnerability has been detected in SourceCodester Best Employee Management System 1.0. This affects an unknown function of the file /assets/uploadImage/Profile/. Such manipulation leads to exposure of information through directory listing. It is possible to launch the attack remotely. | ||||
| CVE-2026-19984 | 1 Jkawamoto | 1 Mcp-florence2 | 2026-08-17 | 6.3 Medium |
| A flaw has been found in jkawamoto mcp-florence2 up to 0.3.13. Affected by this issue is the function get_images of the file src/mcp_florence2/__init__.py. This manipulation of the argument src causes server-side request forgery. The attack may be initiated remotely. The exploit has been published and may be used. It is recommended to change the configuration settings. The vendor explains: "For deployments where SSRF protection is required, I recommend routing all HTTP(S) requests through an SSRF-safe proxy server. This approach mitigates the vulnerability without requiring changes to the mcp-florence2 source code." | ||||
| CVE-2026-19978 | 1 Jiantao88 | 1 Android-mcp-server | 2026-08-17 | 5.3 Medium |
| A flaw has been found in jiantao88 android-mcp-server up to cfb872b2446794193b58edd63f4dbf6af48a6292. The impacted element is the function child_process.exec of the file build/index.js of the component Command Execution. Executing a manipulation of the argument deviceId/packageName/permission/extras[].key/extras[].value can lead to os command injection. It is possible to launch the attack on the local host. The exploit has been published and may be used. This product implements a rolling release for ongoing delivery, which means version information for affected or updated releases is unavailable. This patch is called 14e2bf27c88ba137e35cbb0c2a75f72b595bb98a. It is advisable to implement a patch to correct this issue. | ||||
| CVE-2026-19969 | 1 Assimp | 1 Assimp | 2026-08-17 | 5.4 Medium |
| A security vulnerability has been detected in Open Asset Import Library Assimp 17c12da. The impacted element is the function Assimp::MDLImporter::GenerateOutputMeshes_3DGS_MDL7 of the file code/AssetLib/MDL/MDLLoader.cpp of the component 3DGS MDL7 Model Output Mesh Generator. The manipulation leads to buffer overflow. Remote exploitation of the attack is possible. The exploit has been disclosed publicly and may be used. The project was informed of the problem early through an issue report but has not responded yet. | ||||