Export limit exceeded: 378379 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 378379 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (378379 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-72164 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ocfs2: avoid moving extents to occupied clusters For non-auto OCFS2_IOC_MOVE_EXT operations, userspace supplies a physical me_goal. ocfs2_move_extent() initializes new_phys_cpos from that goal and expects ocfs2_probe_alloc_group() to replace it with a free run in the target block group. The probe currently leaves *phys_cpos unchanged if the scan reaches the end of the group without finding a free run. An occupied goal at the last bit can therefore survive the probe and be passed to __ocfs2_move_extent(), which copies file data into a cluster still owned by another inode before the bitmap is updated. When the probe does find a free run, it also subtracts move_len from the ending bit. The start of an N-bit run ending at i is i - N + 1, so the current calculation can report the bit immediately before the free run. Clear *phys_cpos before scanning and use the correct free-run start. Callers already treat a zero result as -ENOSPC, so failed probes no longer continue with an occupied caller-controlled goal. | ||||
| CVE-2026-72162 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ocfs2: fix UBSAN array-index-out-of-bounds in ocfs2_sum_rightmost_rec [BUG] On-disk corruption setting l_next_free_rec to 0 in an inode's embedded extent list triggers a UBSAN panic on the next write to that file. [CAUSE] ocfs2_sum_rightmost_rec() computes i = le16_to_cpu(el->l_next_free_rec) - 1 and accesses el->l_recs[i] without validating i. When l_next_free_rec is 0, i becomes -1; when l_next_free_rec exceeds l_count, i falls past the end of the array. Either case violates the __counted_by_le(l_count) annotation on l_recs[] and triggers UBSAN. [FIX] Validate the inode's embedded extent list when the inode is read, in ocfs2_validate_inode_block(): l_count must be non-zero and no larger than the inode block can hold, and l_next_free_rec must not exceed l_count. A corrupt list is rejected at read time, before the b-tree code can index l_recs[] out of bounds. | ||||
| CVE-2026-72160 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ocfs2: reject dinodes with non-canonical i_mode type Patch series "ocfs2: harden inode validators against forged metadata", v2. This series adds three structural checks to OCFS2 dinode validation so malformed on-disk fields are rejected before ocfs2_populate_inode() copies them into the in-core inode. The checks cover: - i_mode values whose type bits do not name a canonical POSIX file type; - non-device dinodes whose id1.dev1.i_rdev field is non-zero; and - non-inline dinodes that claim non-zero i_size while i_clusters is zero, covering directories unconditionally and regular files on non-sparse volumes. The normal read path reports these through ocfs2_error(), matching the existing suballoc-slot, inline-data, chain-list, and refcount checks. The online filecheck path uses the same structural predicates but keeps its own reporting contract, returning OCFS2_FILECHECK_ERR_INVALIDINO instead of calling ocfs2_error(). This patch (of 3): ocfs2_validate_inode_block() currently accepts any non-zero i_mode value. ocfs2_populate_inode() then copies that mode verbatim into inode->i_mode and dispatches on i_mode & S_IFMT to the file/dir/symlink/special_file iops; an unrecognised type falls through to ocfs2_special_file_iops and init_special_inode(). Reject dinodes whose type bits do not name one of the seven canonical POSIX file types. Use fs_umode_to_ftype(), the same generic file-type conversion helper OCFS2 already uses for directory entries, so the accepted inode type set matches the kernel file-type vocabulary instead of open-coding a local switch. Apply the same structural check to the online filecheck read path. filecheck keeps its own error namespace, so it reports malformed i_mode through the filecheck logger and OCFS2_FILECHECK_ERR_INVALIDINO instead of calling ocfs2_error(), but it must not allow a malformed dinode to proceed into ocfs2_populate_inode(). | ||||
| CVE-2026-72157 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net: thunderbolt: Fix frags[] overflow by bounding frame_count tbnet_poll() assembles a multi-frame ThunderboltIP packet into one skb. The first frame goes into the skb linear area and every further frame is added as a page fragment. skb_add_rx_frag(skb, skb_shinfo(skb)->nr_frags, page, hdr_size, frame_size, TBNET_RX_PAGE_SIZE - hdr_size); A packet of frame_count frames therefore ends up with frame_count - 1 fragments. tbnet_check_frame() only bounds the peer supplied frame_count to TBNET_RING_SIZE / 4 (64), which is far above MAX_SKB_FRAGS (17 by default). A peer that sends a packet of 19 or more small frames pushes nr_frags past MAX_SKB_FRAGS, so skb_add_rx_frag() writes past skb_shinfo()->frags[] and corrupts memory after the shared info. Tighten the start of packet bound to MAX_SKB_FRAGS + 1 so a packet can never produce more fragments than frags[] can hold. This matches the recent skb frags overflow fixes in other receive paths, for example f0813bcd2d9d ("net: wwan: t7xx: fix potential skb->frags overflow in RX path") and 600dc40554dc ("net: usb: cdc-phonet: fix skb frags[] overflow in rx_complete()"). | ||||
| CVE-2026-72154 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: openrisc: Fix jump_label smp syncing The original commit 8c30b0018f9d ("openrisc: Add jump label support") copies from arm64 and does not properly consider how icache invalidation on remote cores works in OpenRISC. On OpenRISC remote icaches need to be invalidated otherwise static key's may remain state after updating. Fix SMP cache syncing by: 1. Properly invalidate remote core icaches on SMP systems by using icache_all_inv. The old code uses kick_all_cpus_sync() which runs a no-op IPI function call on remote CPU's which does execute a lot of code and flushes many cache lines in the process, but does not flush all and it's not correct on OpenRISC. 2. For architectures that do not have WRITETHROUGH caches be sure to flush the dcache after patching. To test this I first reproduced the issue using a custom test module [0]. The test confirmed that some icache lines maintained stale static_key code sequences after calling static_branch_enable(). After this patch there are no longer jump_label coherency issues. [0] https://github.com/stffrdhrn/or1k-utils/tree/master/tests/smp_static_key_test | ||||
| CVE-2026-72151 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 8.4 High |
| In the Linux kernel, the following vulnerability has been resolved: tpm: tpm2-sessions: wait for async KPP completion in tpm_buf_append_salt tpm_buf_append_salt() in drivers/char/tpm/tpm2-sessions.c calls crypto_kpp_generate_public_key() and crypto_kpp_compute_shared_secret() without installing a completion callback, discards both return values, and immediately frees the kpp_request via kpp_request_free(). When the resolved ecdh-nist-p256 KPP backend is asynchronous (atmel-ecc, HPRE, keembay-ocs), either operation returns -EINPROGRESS and the deferred completion worker dereferences the freed request. The path fires automatically from the hwrng_fillfn kernel thread via tpm_get_random -> tpm2_get_random -> tpm2_start_auth_session -> tpm_buf_append_salt on every entropy poll, without any userland action. Install crypto_req_done as the completion callback, wrap both KPP operations in crypto_wait_req(), and propagate errors to the caller. The wait is a no-op for synchronous backends. | ||||
| CVE-2026-72149 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: dmaengine: tegra: Fix burst size calculation Currently, the Tegra GPC DMA hardware requires the transfer length to be a multiple of the max burst size configured for the channel. When a client requests a transfer where the length is not evenly divisible by the configured max burst size, the DMA hangs with partial burst at the end. Fix this by reducing the burst size to the largest power-of-2 value that evenly divides the transfer length. For example, a 40-byte transfer with a 16-byte max burst will now use an 8-byte burst (40 / 8 = 5 complete bursts) instead of causing a hang. This issue was observed with the PL011 UART driver where TX DMA transfers of arbitrary lengths were stuck. | ||||
| CVE-2026-72148 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: dmaengine: dw-edma: Add spinlock to protect DONE_INT_MASK and ABORT_INT_MASK The DONE_INT_MASK and ABORT_INT_MASK registers are shared by all DMA channels, and modifying them requires a read-modify-write sequence. Because this operation is not atomic, concurrent calls to dw_edma_v0_core_start() can introduce race conditions if two channels update these registers simultaneously. Add a spinlock to serialize access to these registers and prevent race conditions. [den: update dw_edma.lock comment] | ||||
| CVE-2026-72146 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 8.4 High |
| In the Linux kernel, the following vulnerability has been resolved: dmaengine: sh: rz-dmac: Move interrupt request after everything is set up Once the interrupt is requested, the interrupt handler may run immediately. Since the IRQ handler can access channel->ch_base, which is initialized only after requesting the IRQ, this may lead to invalid memory access. Likewise, the IRQ thread may access uninitialized data (the ld_free, ld_queue, and ld_active lists), which may also lead to issues. Request the interrupts only after everything is set up. To keep the error path simpler, use dmam_alloc_coherent() instead of dma_alloc_coherent(). | ||||
| CVE-2026-72144 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: platform/x86: dell-laptop: fix missing cleanups in init error path dell_init() initializes several resources after dell_setup_rfkill(), including the optional touchpad LED, keyboard backlight LED, battery hook, debugfs directory and dell-laptop notifier. If a later LED or backlight registration fails, the error path only tears down the battery hook and rfkill resources. This leaves the notifier, debugfs directory, keyboard backlight LED and optional touchpad LED registered after dell_init() returns an error. Add the missing cleanup calls before tearing down rfkill. | ||||
| CVE-2026-72143 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: platform/x86: ISST: Restore SST-PP control to all domains The SST-PP control offset is only restored to power domain 0 after resume. During suspend, control values are read and stored for all power domains. Use pd_info->sst_base instead of power_domain_info->sst_base, which only points to power domain 0 base address. | ||||
| CVE-2026-72141 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: i2c: imx: fix locked bus on SMBus block-read of 0 (IRQ) SMBus 3.1 6.5.7 allows a Block Read byte count of 0, but the interrupt-driven block-read state machine rejects it as -EPROTO. Worse, it returns without a NACK+STOP: the next receive cycle has already started, so the target keeps holding SDA and the bus stays stuck until a power cycle of this i2c controller. Accept count=0: NACK the in-flight dummy byte (TXAK) and set msg->len to 2 so i2c_imx_isr_read_continue() emits STOP via its normal last-byte path. The dummy byte is discarded; block-read callers only consume buf[0..count-1]. Reading I2DR has likewise already armed the next byte on the count > I2C_SMBUS_BLOCK_MAX error path, so NACK it (TXAK) before aborting with -EPROTO; otherwise the failing transfer's STOP cannot complete and the bus stays held. The atomic path regressed earlier (v3.16) and is fixed separately; this patch covers only the v6.13 state-machine rework. | ||||
| CVE-2026-72139 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: tcp: defer md5sig_info kfree past RCU grace period in tcp_connect The md5+ao reconciliation in tcp_connect() (net/ipv4/tcp_output.c) has two symmetric branches: if (needs_md5) { tcp_ao_destroy_sock(sk, false); } else if (needs_ao) { tcp_clear_md5_list(sk); kfree(rcu_replace_pointer(tp->md5sig_info, NULL, ...)); } Both branches free a per-socket auth-info object while the socket is in TCP_SYN_SENT and is already on the inet ehash (inserted by inet_hash_connect() in tcp_v4_connect()). Both branches are reachable by softirq RX-path readers that load the corresponding info pointer via implicit RCU before bh_lock_sock_nested() is taken. The needs_md5 branch is fixed in the prior patch by re-introducing the call_rcu() free in tcp_ao_destroy_sock(): the equivalent per-key loop runs inside tcp_ao_info_free_rcu(), the RCU callback, so by the time it frees each tcp_ao_key all softirq readers that captured the container have already completed rcu_read_unlock(). The needs_ao branch is not symmetric in the same way. The container free can be deferred via kfree_rcu(md5sig, rcu) -- struct tcp_md5sig_info already has the required rcu member (include/net/tcp.h:1999-2002), and the rest of the tree already does this in the tcp_md5sig_info_add() rollback paths (net/ipv4/tcp_ipv4.c:1410, 1436). But the per-key teardown is done by tcp_clear_md5_list() in process context BEFORE the container's RCU grace period: it walks &md5sig->head and frees each tcp_md5sig_key with bare hlist_del + kfree. A concurrent softirq reader in __tcp_md5_do_lookup() / __tcp_md5_do_lookup_exact() (tcp_ipv4.c:1253, 1298) walks the same list via hlist_for_each_entry_rcu() and races with that bare kfree on the keys themselves -- a per-key slab use-after-free of the same class as the TCP-AO bug, on the same race window. Fix this in two halves: 1. Convert the bare kfree() in tcp_connect() to kfree_rcu() so the md5sig_info container joins the rest of the md5sig lifecycle. The local-variable lift is mechanical and required because kfree_rcu() is a macro that expects an lvalue. 2. Make tcp_clear_md5_list() RCU-safe by replacing hlist_del + kfree(key) with hlist_del_rcu + kfree_rcu(key, rcu). struct tcp_md5sig_key already carries the rcu member (include/net/tcp.h:1995) and tcp_md5_do_del() (net/ipv4/tcp_ipv4.c:1456) already uses kfree_rcu, so this restores the lifecycle invariant the rest of the file follows rather than introducing a one-off. The other caller of tcp_clear_md5_list() is tcp_md5_destruct_sock() (net/ipv4/tcp.c:412), which runs from the sock destructor when the socket is already unhashed and unreachable; the extra grace period there is unnecessary but harmless. Making the helper unconditionally RCU-safe is the cleaner contract. The needs_ao branch is not reachable by the userns reproducer used to demonstrate the AO-side splat (the repro installs both keys but ends up in the needs_md5 branch because the connect peer matches the MD5 key, not the AO key); however the symmetric race exists and a maintainer touching this code should not have to think about which branch escapes RCU and which one does not. [also credits to Qihang, who found that this races with tcp-diag] | ||||
| CVE-2026-72137 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: xfrm: nat_keepalive: avoid double free on send error nat_keepalive_send() frees the keepalive skb whenever the IPv4 or IPv6 send helper reports an error. That cleanup is only correct before the skb is handed to the output path. Once ip_build_and_send_pkt() or ip6_xmit() takes ownership, the networking stack may already have consumed the skb before returning an error, so freeing it again is unsafe. Handle the pre-handoff failure cases inside nat_keepalive_send_ipv4() and nat_keepalive_send_ipv6(), where the caller still owns the skb, and keep nat_keepalive_send() responsible only for family dispatch and the unsupported-family cleanup path. | ||||
| CVE-2026-72136 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: xfrm: xfrm_interface: require CAP_NET_ADMIN in the device netns for changelink xfrmi_changelink() operates on at most two netns, dev_net(dev) and the interface link netns xi->net. They differ once the device is created in or moved to a netns other than the one the request runs in. The rtnl changelink path checks CAP_NET_ADMIN only against dev_net(dev), so a caller privileged there but not in xi->net can rewrite an interface that lives in xi->net. Gate xfrmi_changelink() on rtnl_dev_link_net_capable() at its top, before any attribute is parsed. | ||||
| CVE-2026-72135 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: tpm: Make the TPM character devices non-seekable The TPM character devices expose a sequential command/response interface, but their open handlers leave FMODE_PREAD and FMODE_PWRITE enabled. After a command leaves a response pending, pread(fd, buf, 16, 0x1400) passes 0x1400 as *off to tpm_common_read(). The transfer length is bounded by response_length, but the offset is used unchecked when forming data_buffer + *off. A sufficiently large offset therefore causes an out-of-bounds heap read through copy_to_user() and, if the copy succeeds, an out-of-bounds zero-write through the following memset(). Positional I/O does not provide coherent semantics for this interface. An arbitrary pread offset cannot represent how much of a response has been consumed sequentially. The write callback always stores a command at the start of data_buffer, while pwrite() does not update file->f_pos and can leave the sequential read cursor stale. Call nonseekable_open() from both open handlers. This removes FMODE_PREAD and FMODE_PWRITE, causing positional reads and writes to fail with -ESPIPE before reaching the TPM callbacks, and explicitly marks the files non-seekable. Normal read() and write() continue to use the existing sequential f_pos cursor, leaving the response state machine unchanged. Tested on Linux 6.12 with KASAN and a swtpm TPM2 device: - sequential partial reads returned the complete response - pread() and preadv() with offset 0x1400 returned -ESPIPE - pwrite() and pwritev() with offset zero returned -ESPIPE - the pending response remained intact after the rejected operations - a subsequent normal command/response cycle completed normally - no KASAN report was produced. | ||||
| CVE-2026-72134 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: spi: imx: reconfigure for PIO when DMA cannot be started When spi_imx_can_dma() selects DMA, the ECSPI is configured for DMA: spi_imx_setupxfer() sets CTRL.SMC and clears dynamic_burst, and spi_imx_dma_transfer() programs the dynamic-burst BURST_LENGTH and the SDMA watermarks. If the DMA descriptor cannot be prepared (dmaengine_prep_slave_single() returns NULL), the transfer is failed with SPI_TRANS_FAIL_NO_START and falls back to PIO. The dynamic-burst DMA path uses its own bounce buffers instead of the SPI core's mapping, so xfer->{tx,rx}_sg_mapped are not set and the core's DMA->PIO retry is skipped; the driver falls back to PIO internally. But none of the DMA-mode configuration is undone, so the PIO transfer runs with CTRL.SMC set, the wrong burst length and dynamic_burst cleared, and the transferred data is corrupted. This is easily hit on i.MX8MP boards that describe ECSPI DMA in the device tree but run SDMA on ROM firmware (no external sdma-imx7d.bin): every ECSPI DMA prepare fails. An Infineon SLB9670 TPM on ECSPI1 then returns shifted TPM2_GetCapability data, is flagged "field failure mode", /dev/tpmrm0 is never created. Set controller->fallback before re-running spi_imx_setupxfer() so the ECSPI is reconfigured exactly like a normal PIO transfer. With controller->fallback set, spi_imx_setupxfer() sees spi_imx_can_dma() return false, so it clears spi_imx->usedma and reprograms the controller (clears CTRL.SMC, restores dynamic_burst and the PIO burst length). No explicit spi_imx->usedma = false is needed: setupxfer() already updates it from the can_dma() result. | ||||
| CVE-2026-72133 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 8.4 High |
| In the Linux kernel, the following vulnerability has been resolved: spi: uniphier: Fix completion initialization order before devm_request_irq() The driver calls devm_request_irq() before initializing the completion used by the interrupt handler. Because the interrupt may occur immediately after devm_request_irq(), the handler may execute before init_completion(). This may result in calling complete() on an uninitialized completion, causing undefined behavior. This has been observed with KASAN. Fix this by initializing the completion before registering the IRQ. | ||||
| CVE-2026-72130 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: nvmet-auth: reject short AUTH_RECEIVE buffers nvmet_execute_auth_receive() trusts the AUTH_RECEIVE allocation length after checking only that it is nonzero and matches the transfer length. In the SUCCESS1 and FAILURE1/default states, that lets a remote NVMe-oF initiator reach the fixed-size DH-HMAC-CHAP response builders with a kmalloc() buffer shorter than the response, so nvmet_auth_success1() and nvmet_auth_failure1() write past the allocation; both only WARN_ON the short length and then format the message anyway. Impact: A remote NVMe-oF initiator with access to an auth-enabled target can trigger a 16-byte heap out-of-bounds write via a one-byte AUTH_RECEIVE allocation length. Compute the minimum response length for the current DH-HMAC-CHAP step in nvmet_auth_receive_data_len() and report a zero data length when the host-supplied allocation length is shorter, so the existing zero-length check in nvmet_execute_auth_receive() rejects the command before any builder runs. The SUCCESS1 minimum is sizeof(struct nvmf_auth_dhchap_success1_data) plus the HMAC hash length, because the response hash is written into the rval[] flexible-array tail, so the minimum is state dependent rather than a flat sizeof. CHALLENGE keeps its existing variable-length guard in nvmet_auth_challenge(). This is reachable only when in-band DH-HMAC-CHAP authentication is configured on the target. | ||||
| CVE-2026-72129 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: nvmet-rdma: handle inline data with a nonzero offset nvmet_rdma_use_inline_sg() maps the host-controlled inline data offset into the per-command inline scatterlist. The bounds check admits any offset with off + len <= inline_data_size, but the mapping still assumes the data begins in the first inline page: sg->offset = off; sg->length = min_t(int, len, PAGE_SIZE - off); When a port is configured with inline_data_size > PAGE_SIZE (settable up to max(SZ_16K, PAGE_SIZE)), an offset in (PAGE_SIZE, inline_data_size] makes "PAGE_SIZE - off" underflow, so sg->length is set to ~4 GiB and the block backend reads far past the first inline page. num_pages(len) also ignores the offset, so an in-bounds offset whose [off, off+len) span crosses a page boundary under-counts the scatterlist. Map the offset properly: split it into a page index and an in-page offset, start the scatterlist at that page, and size the page count from page_off + len. Because the request scatterlist may now start at inline_sg[page_idx] rather than inline_sg[0], generalize the inline-SGL identity test in nvmet_rdma_release_rsp() to a range test; otherwise the persistent inline scatterlist is mistaken for an allocated one and nvmet_req_free_sgls() frees an inline page (and warns in free_large_kmalloc()). | ||||