Export limit exceeded: 390407 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (390407 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-80990 | 1 Linux | 1 Linux Kernel | 2026-09-11 | 4.8 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: thunderbolt: Release the Rx HopID that was handed out on mismatch tb_xdomain_alloc_in_hopid() passes the wanted HopID to ida_alloc_range() as the lower bound, so a taken id is not an error there: the allocator returns the next free one above it. tbnet_connected_work() asks for the peer's transmit path, treats any other id as a failure and returns without releasing what it got, so that allocation stays live for the rest of the XDomain connection with nothing left holding a reference to it. Release the id when it is not the one we asked for, the same way the error unwind at the end of the function releases the expected one. | ||||
| CVE-2026-80988 | 1 Linux | 1 Linux Kernel | 2026-09-11 | 4.1 Medium |
| In the Linux kernel, the following vulnerability has been resolved: NTB: ntb_transport: Fail TX enqueue when the QP link is down Commit f195a1a6fe41 ("ntb: Drop packets when qp link is down") meant to make ntb_transport_tx_enqueue() drop packets submitted while the QP link is down, but it only returns 0 without consuming the packet. Zero means success by this function's contract, so ntb_netdev reports NETDEV_TX_OK and forgets the skb: nothing queued it, nothing frees it, and it leaks, one skb for every transmit racing a link-down. Return -ENOLINK instead, restoring the contract that a non-zero return leaves the buffer owned by the caller. With the preceding patch, ntb_netdev frees the skb on non-retryable enqueue failures and returns NETDEV_TX_OK, so a packet racing with link-down is dropped without leaking or entering a busy retry loop. | ||||
| CVE-2026-80987 | 1 Linux | 1 Linux Kernel | 2026-09-11 | 4.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: NTB: ntb_transport: Reject oversized TX buffers ntb_process_tx() handles an oversized buffer by calling tx_handler() with a NULL data pointer and returning success. ntb_netdev therefore neither frees the skb in its completion callback nor takes its enqueue error path, leaking it. Reject oversized buffers in ntb_transport_tx_enqueue() before acquiring a queue entry and return -EMSGSIZE. The caller retains ownership of the buffer, and the preceding netdev patch frees the skb when enqueue returns this permanent error. | ||||
| CVE-2026-80986 | 1 Linux | 1 Linux Kernel | 2026-09-11 | 4.1 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net/smc: bound the peer rkey counts in SMC-Rv2 LLC messages On a link whose device has max_recv_sge == 1 there is no shared v2 receive buffer, and smc_llc_save_add_link_rkeys() takes the v2 extension from 44 bytes past the start of the queue entry's inline message: ext = (struct smc_llc_msg_add_link_v2_ext *)(llc_msg + SMC_WR_TX_SIZE); The entry is a 72-byte allocation and the extension starts at offset 68, so ext->num_rkeys at offset 94 is already past it. This happens on every SMC-Rv2 link addition, whatever the peer sends: [ 2.490065] BUG: KASAN: slab-out-of-bounds in smc_llc_save_add_link_rkeys+0x333/0x350 [ 2.490431] Read of size 2 at addr ffff8880056406de by task smctest/106 [ 2.490709] [ 2.490792] CPU: 0 UID: 0 PID: 106 Comm: smctest Not tainted 7.2.0-rc5-p1-g77a5d9d9c99f #32 PREEMPT(lazy) [ 2.490795] Hardware name: QEMU Ubuntu 24.04 PC v2 (i440FX + PIIX, arch_caps fix, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 [ 2.490798] Call Trace: [ 2.490803] <TASK> [ 2.490805] dump_stack_lvl+0x53/0x70 [ 2.490810] print_report+0xd0/0x630 [ 2.490828] ? __pfx__raw_spin_lock_irqsave+0x10/0x10 [ 2.490832] ? smc_llc_save_add_link_rkeys+0x333/0x350 [ 2.490834] kasan_report+0xce/0x100 [ 2.490836] ? smc_llc_save_add_link_rkeys+0x333/0x350 [ 2.490837] smc_llc_save_add_link_rkeys+0x333/0x350 [ 2.490839] ? smcr_buf_map_lgr+0x1bf/0x2b0 [ 2.490844] smc_llc_cli_add_link+0xca7/0x1e80 [ 2.490848] ? smc_llc_wait+0x355/0x810 [ 2.490850] ? __pfx_smc_llc_wait+0x10/0x10 [ 2.490851] ? __pfx_smc_llc_cli_add_link+0x10/0x10 [ 2.490853] ? __pfx_autoremove_wake_function+0x10/0x10 [ 2.490863] __smc_connect+0x3f5c/0x4980 [ 2.490873] ? __pfx_kernel_connect+0x10/0x10 [ 2.490888] ? __pfx___smc_connect+0x10/0x10 [ 2.490891] ? release_sock+0x148/0x1d0 [ 2.490894] smc_connect+0x42c/0x580 [ 2.490896] __sys_connect+0xfc/0x130 [ 2.490898] ? __pfx___sys_connect+0x10/0x10 [ 2.490900] ? handle_mm_fault+0x1a1/0x430 [ 2.490908] __x64_sys_connect+0x6d/0xb0 [ 2.490909] ? fpregs_assert_state_consistent+0x56/0xe0 [ 2.490917] do_syscall_64+0xf9/0x540 [ 2.490921] entry_SYSCALL_64_after_hwframe+0x77/0x7f [ 2.490924] RIP: 0033:0x421bb4 [ 2.490927] Code: ff f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 80 3d ad 34 09 00 00 74 13 b8 2a 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 4c c3 0f 1f 00 55 48 89 e5 48 83 ec 10 89 55 [ 2.490929] RSP: 002b:00007ffd473b01a8 EFLAGS: 00000202 ORIG_RAX: 000000000000002a [ 2.490935] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 0000000000421bb4 [ 2.490936] RDX: 0000000000000010 RSI: 00007ffd473b01d0 RDI: 0000000000000003 [ 2.490937] RBP: 0000000000003930 R08: 0000000000000004 R09: 0000000000000000 [ 2.490938] R10: 00007ffd473b0f98 R11: 0000000000000202 R12: 0000000000000006 [ 2.490939] R13: 00007ffd473b0f87 R14: 0000000000000003 R15: 00007ffd473b0f90 [ 2.490940] </TASK> [ 2.490941] [ 2.499545] Allocated by task 44: [ 2.499693] kasan_save_stack+0x33/0x60 [ 2.499860] kasan_save_track+0x14/0x30 [ 2.500026] __kasan_kmalloc+0x8f/0xa0 [ 2.500190] __kmalloc_cache_noprof+0x158/0x370 [ 2.500393] smc_llc_enqueue+0x72/0x560 [ 2.500559] smc_wr_rx_tasklet_fn+0x474/0xa80 [ 2.500747] tasklet_action_common+0x20f/0x8a0 [ 2.500945] handle_softirqs+0x18e/0x590 [ 2.501115] do_softirq+0x3b/0x60 [ 2.501266] __local_bh_enable_ip+0x61/0x70 [ 2.501446] __alloc_skb+0x732/0x890 [ 2.501604] rxe_init_packet+0x16b/0x4f0 [ 2.501783] prepare_ack_packet+0xb8/0x830 [ 2.501962] rxe_receiver+0x495/0x96e0 [ 2.502125] do_work+0x144/0x470 [ 2.502269] process_one_work+0x633/0x1030 [ 2.502450] worker_thread+0x45b/0xd10 [ 2.50261 ---truncated--- | ||||
| CVE-2026-80985 | 1 Linux | 1 Linux Kernel | 2026-09-11 | 5.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net/smc: carry oversized SMC-Rv2 LLC messages in the queue entry smc_llc_rmt_delete_rkey() and smc_llc_save_add_link_rkeys() read the part of a v2 message that does not fit into the 44-byte union smc_llc_msg, and both bound themselves by the size of the buffer it landed in, not by what arrived. On a link with a shared v2 receive buffer a 44-byte DELETE_RKEY_V2 declaring 255 rkeys reaches rkey[9..254] in whatever an earlier message left in lgr->wr_rx_buf_v2, and passes each of them to smc_rtoken_delete(). One of those 255 matched a registered rtoken and deleted it. An ADD_LINK on such a link installs up to 255 rtokens from the same bytes. Copy the tail into the queue entry, so its length is the length of the message that arrived, and declare the rkeys that fit inline as a member of the union instead of reaching them through a cast. The same DELETE_RKEY_V2 now processes the 9 rkeys it carries. The copy is limited to the longest tail the two functions can read, so the peer does not pick the size of the entry. The bound the previous patch placed on links without a shared v2 receive buffer is no longer needed. | ||||
| CVE-2026-80983 | 1 Linux | 1 Linux Kernel | 2026-09-11 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net/smc: fix socket refcount leak in smc_switch_conns() smc_switch_conns() takes a reference on the SMC socket before dropping lgr->conns_lock, so the connection stays alive while the CDC slot is fetched: sock_hold(&smc->sk); read_unlock_bh(&lgr->conns_lock); /* pre-fetch buffer outside of send_lock, might sleep */ rc = smc_cdc_get_free_slot(conn, to_lnk, &wr_buf, NULL, &pend); if (rc) goto err_out; The err_out label only drops the wr_tx link reference, so this early exit returns without the matching sock_put(). The second error exit is not affected, because sock_put() has already run by then. A leaked sk_refcnt means the smc_sock is never destroyed. Its send and receive buffers stay allocated, and for a user socket the reference held on the network namespace is never released, so the netns can no longer be torn down. smc_cdc_get_free_slot() fails when the target link goes down or when the connection has been killed while the switch is in progress. Both are reachable during the link failover this function implements, so the leak is triggered by the same hardware events that make smc_switch_conns() run in the first place. Restructure so there is a single sock_put() covering both outcomes, instead of adding a second one to the error path. | ||||
| CVE-2026-80981 | 1 Linux | 1 Linux Kernel | 2026-09-11 | 5.2 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net/smc: fix use-after-free of the LLC qentry in smc_llc_srv_add_link() smc_llc_srv_add_link() keeps add_llc pointing into the queue entry: add_llc = &qentry->msg.add_link; smc_llc.c:1482 ... smc_llc_save_add_link_info(link_new, add_llc); smc_llc.c:1494 smc_llc_flow_qentry_del(&lgr->llc_flow_lcl); smc_llc.c:1495 ... u8 *llc_msg = smc_link_shared_v2_rxbuf(link) ? (u8 *)lgr->wr_rx_buf_v2 : (u8 *)add_llc; smc_llc.c:1504 smc_llc_save_add_link_rkeys(link, link_new, llc_msg); smc_llc.c:1506 smc_llc_flow_qentry_del() kfree()s the entry, so on a link without a shared v2 receive buffer the pointer handed to smc_llc_save_add_link_rkeys() is already freed. Before the Fixes: commit that branch always used lgr->wr_rx_buf_v2 and add_llc was not used after the free. Reproduced on an unpatched tree over rxe, with KASAN, kasan_multi_shot and a link forced to max_recv_sge == 1: the entry is freed and read by the same call, and the freeing frame is smc_llc_srv_add_link() itself. [ 2.523161] BUG: KASAN: slab-use-after-free in smc_llc_save_add_link_rkeys+0x333/0x350 [ 2.523499] Read of size 2 at addr ffff8880052194de by task kworker/0:1/11 [ 2.523789] [ 2.523862] CPU: 0 UID: 0 PID: 11 Comm: kworker/0:1 Not tainted 7.2.0-rc5-p0-g2c9dd296545d #35 PREEMPT(lazy) [ 2.523865] Hardware name: QEMU Ubuntu 24.04 PC v2 (i440FX + PIIX, arch_caps fix, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 [ 2.523866] Workqueue: smc_hs_wq smc_listen_work [ 2.523869] Call Trace: [ 2.523870] <TASK> [ 2.523871] dump_stack_lvl+0x53/0x70 [ 2.523872] print_report+0xd0/0x630 [ 2.523874] ? __pfx__raw_spin_lock_irqsave+0x10/0x10 [ 2.523876] ? smc_llc_save_add_link_rkeys+0x333/0x350 [ 2.523878] kasan_report+0xce/0x100 [ 2.523879] ? smc_llc_save_add_link_rkeys+0x333/0x350 [ 2.523881] smc_llc_save_add_link_rkeys+0x333/0x350 [ 2.523883] ? smcr_buf_reg_lgr+0x2a4/0x660 [ 2.523885] smc_llc_srv_add_link+0xaa2/0x1e50 [ 2.523888] ? _printk+0xba/0xf0 [ 2.523897] ? __pfx_smc_llc_srv_add_link+0x10/0x10 [ 2.523899] ? down_write+0xb0/0x130 [ 2.523903] ? __pfx_down_write+0x10/0x10 [ 2.523905] smc_listen_work+0x489e/0x4d00 [ 2.523907] ? kmem_cache_free+0x1c6/0x3a0 [ 2.523911] ? __pfx_smc_listen_work+0x10/0x10 [ 2.523913] ? release_sock+0x148/0x1d0 [ 2.523915] ? smc_tcp_listen_work+0xb4f/0xfc0 [ 2.523917] ? _raw_spin_lock_irq+0x80/0xe0 [ 2.523918] ? __pfx__raw_spin_lock_irq+0x10/0x10 [ 2.523920] process_one_work+0x633/0x1030 [ 2.523922] ? assign_work+0x11d/0x370 [ 2.523924] worker_thread+0x45b/0xd10 [ 2.523926] ? __pfx_worker_thread+0x10/0x10 [ 2.523928] ? __pfx_worker_thread+0x10/0x10 [ 2.523929] kthread+0x2c6/0x3b0 [ 2.523931] ? recalc_sigpending+0x15c/0x1e0 [ 2.523934] ? __pfx_kthread+0x10/0x10 [ 2.523935] ret_from_fork+0x36e/0x5a0 [ 2.523937] ? __pfx_ret_from_fork+0x10/0x10 [ 2.523938] ? __switch_to+0x572/0xdd0 [ 2.523943] ? __pfx_kthread+0x10/0x10 [ 2.523944] ret_from_fork_asm+0x1a/0x30 [ 2.523947] </TASK> [ 2.523948] [ 2.531253] Allocated by task 48: [ 2.531399] kasan_save_stack+0x33/0x60 [ 2.531570] kasan_save_track+0x14/0x30 [ 2.531737] __kasan_kmalloc+0x8f/0xa0 [ 2.531905] __kmalloc_cache_noprof+0x158/0x370 [ 2.532100] smc_llc_enqueue+0x72/0x560 [ 2.532268] smc_wr_rx_tasklet_fn+0x474/0xa80 [ 2.532491] tasklet_action_common+0x20f/0x8a0 [ 2.532714] handle_softirqs+0x18e/0x590 [ 2.532886] do_softirq+0x3b/0x60 [ 2.533036] __local_bh_enable_ip+0x61/0x70 [ 2.533221] __alloc_skb+0x732/0x890 [ 2.533384] rxe_init_packet+0x16b/0x4f0 [ 2.533567] prepare_ack_packet+0xb8/0x830 [ 2.533760] rxe_receiver+0x495/0x96e0 [ 2.533933] do_work+0x144/0x470 [ 2 ---truncated--- | ||||
| CVE-2026-80980 | 1 Linux | 1 Linux Kernel | 2026-09-11 | 4.8 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net/smc: stop killed, freed and out_of_sync sharing a byte The three connection state flags are single-bit bitfields, so they occupy one byte of struct smc_connection and every store to one is a read-modify-write of the other two: u8 killed : 1; u8 freed : 1; u8 out_of_sync : 1; They are not written under a common lock. smc_cdc_msg_validate() sets out_of_sync from the receive tasklet, while smc_conn_kill() sets killed from process context under lock_sock(), and the receive path does not defer to the backlog when the socket is owned -- smc_cdc_msg_recv() takes only bh_lock_sock(). Give each flag its own byte so a store no longer touches its neighbours. All readers test them as booleans and are unchanged. struct smc_connection grows by two bytes. | ||||
| CVE-2026-80979 | 1 Linux | 1 Linux Kernel | 2026-09-11 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: net/smc: unregister the connection before draining the rx tasklet smc_conn_free() calls smc_ism_unset_conn() only while the link group is still on its device list, and never sets conn->killed. smc_lgr_terminate_sched() unlinks the group immediately and defers killing its connections to a work item, so a connection freed in that window keeps its smcd->conn[] slot with both gates in smcd_handle_irq() open, and the device can re-arm the receive tasklet after tasklet_kill() has returned. On the DMB-nocopy path the ghost send buffer is freed right after that drain, so the re-armed tasklet dereferences it. Unregister unconditionally and drain before the detach at both teardown sites, mirroring rmb_desc, which smc_buf_unuse() releases after the drain. Clear conn->sndbuf_desc before freeing it as well, so a reader that samples the pointer cannot get one that is already freed. | ||||
| CVE-2026-80977 | 1 Linux | 1 Linux Kernel | 2026-09-11 | 7.4 High |
| In the Linux kernel, the following vulnerability has been resolved: net: skbuff: don't touch shared zerocopy state in skb_tx_error() skb_tx_error() completes the zerocopy uarg and clears SKBFL_ALL_ZEROCOPY, and skb_zcopy_downgrade_managed() clears SKBFL_MANAGED_FRAG_REFS. Both live in skb_shinfo(), which every clone shares, while the caller only owns the reference it is about to drop. Through a clone it tells the producer its pages are free and drops SKBFL_SHARED_FRAG for an skb that is still in flight. Open vSwitch reaches this with a non-last OVS_ACTION_ATTR_RECIRC: clone_execute() sends a skb_clone() into ovs_dp_process_packet() while do_execute_actions() keeps forwarding the original, and skb_clone() does not privatise the frags here -- skb_orphan_frags() returns early on SKBFL_DONT_ORPHAN. A flow miss on the clone then strips the marker from the packet still being forwarded, and a later local ESP delivery decrypts in place over frags it does not own privately. Skip it for a cloned skb. Nothing is lost: skb_release_data() clears the zerocopy state once the last reference to the shared data goes. | ||||
| CVE-2026-80975 | 1 Linux | 1 Linux Kernel | 2026-09-11 | 5.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mfd: qnap-mcu: keep the reply buffer alive past a command timeout qnap_mcu_exec() publishes an on-stack buffer to the receive path: unsigned char rx[QNAP_MCU_RX_BUFFER_SIZE]; ... reply->data = rx; reply->length = length; and qnap_mcu_receive_buf() writes into it from the serdev receive path, which runs out of flush_to_ldisc() and is not serialized against qnap_mcu_exec() at all. bus_lock cannot cover it, because qnap_mcu_exec() holds that mutex across wait_for_completion_timeout(). On a timeout qnap_mcu_exec() returns with reply->data still pointing at its own frame. A reply that arrives late, or an unsolicited message from the MCU, is then written into a stack frame that has been left, corrupting whatever runs next on that stack. The same applies when qnap_mcu_write() fails, since that path returns without touching the reply state either. Move the receive buffer into struct qnap_mcu. It is 37 bytes and the structure is devm_kzalloc()ed, so it lives as long as the driver, and a late write lands in memory that is still valid and is reinitialized by the next command. bus_lock keeps commands from sharing it. This deliberately does not clear reply->data or reply->length on the timeout path. Doing so races with qnap_mcu_receive_buf(), which reads both after its if (!reply->length) return size; check: clearing reply->data gives a NULL dereference, and clearing reply->length alone removes the reply->received == reply->length exit condition, so the copy loop runs until the uart chunk is consumed and overruns the buffer. Leaving both set keeps the write bounded by reply->length, which qnap_mcu_exec() has already checked against sizeof(mcu->rx). | ||||
| CVE-2026-80971 | 1 Linux | 1 Linux Kernel | 2026-09-11 | 4.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: bcd2000: clear the URB pointers on disconnect bcd2000_free_usb_related_resources() frees both URBs and leaves the pointers behind: usb_kill_urb(bcd2k->midi_out_urb); usb_kill_urb(bcd2k->midi_in_urb); usb_free_urb(bcd2k->midi_out_urb); usb_free_urb(bcd2k->midi_in_urb); The rawmidi device outlives that call. A substream that is still open when the device is unplugged reaches bcd2000_midi_send() from the trigger path on close. That function writes to the freed URB and then hands it to the USB core: bcd2k->midi_out_urb->transfer_buffer_length = BUFSIZE; ... ret = usb_submit_urb(bcd2k->midi_out_urb, GFP_ATOMIC); usb_kill_urb() does not stop a later submission either, so a submit that races the disconnect can requeue the URB after it has been reaped. midi_in_urb is exposed the same way: bcd2000_input_complete() resubmits it from the completion handler. KASAN on 7.2.0-rc5 (arm64): BUG: KASAN: slab-use-after-free in bcd2000_midi_send [snd_bcd2000] Write of size 4 at addr ffff00001827d388 by task bpoc/168 __asan_store4 bcd2000_midi_send [snd_bcd2000] bcd2000_midi_output_trigger [snd_bcd2000] snd_rawmidi_kernel_write1 close_substream.part.0 Freed by task 168: usb_free_urb bcd2000_disconnect [snd_bcd2000] BUG: KASAN: slab-use-after-free in usb_submit_urb Read of size 8 at addr ffff00001827d3b8 by task bpoc/168 Clear both pointers after freeing and test them on the paths that can still run. Poison the URBs before freeing them: usb_poison_urb() waits for a running completion handler and rejects any later submission, so after it returns the input path is quiesced and only the rawmidi trigger path can still reach bcd2000_midi_send(). No unpoison is needed; the URBs are freed on the next line. Discovered by XBOW, triaged by Baul Lee <baul.lee@xbow.com> | ||||
| CVE-2026-80970 | 1 Linux | 1 Linux Kernel | 2026-09-11 | 4.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: FCP: do not copy out an uninitialised init response fcp_ioctl_init() allocates its response buffer with kmalloc() and copies the whole buffer back to userspace: buf_size = init.step0_resp_size + init.step2_resp_size; void *resp __free(kfree) = kmalloc(buf_size, GFP_KERNEL); ... if (copy_to_user(arg->resp, resp, buf_size)) return -EFAULT; Nothing clears the buffer, and the only writer of its leading step0_resp_size bytes is the step-0 control transfer: err = snd_usb_ctl_msg(dev, usb_rcvctrlpipe(dev, 0), FCP_USB_REQ_STEP0, USB_RECIP_INTERFACE | USB_TYPE_CLASS | USB_DIR_IN, 0, private->bInterfaceNumber, step0_resp, private->step0_resp_size); if (err < 0) return err; usb_fill_control_urb() does not set URB_SHORT_NOT_OK, so a short or zero-length data stage completes with status 0 and snd_usb_ctl_msg() returns a small actual_length. The only check is err < 0, so a short transfer is accepted as success. snd_usb_ctl_msg() copies the full size back unconditionally: buf = kmemdup(data, size, GFP_KERNEL); ... memcpy(data, buf, size); Bytes the device never wrote are therefore restored into resp unchanged and copied to userspace. step0_resp_size and step2_resp_size are each validated only to 1..255, so the caller also picks the slab cache, from kmalloc-8 up to kmalloc-512. On 7.2.0-rc5 (arm64), device answering step 0 with a zero-length data stage, s0 = s2 = 255: # init_on_alloc off, no spray step0 window [0,255): nonzero=94/255 000: 00 80 60 06 00 00 ff ff 18 00 00 00 57 01 ea 01 010: 08 78 22 13 00 00 ff ff a8 c4 5f 80 00 80 ff ff # same kernel, kmalloc-512 pre-seeded with an 8-byte tag step0 window [0,255): nonzero=219/255 tagbytes=232 # identical run, init_on_alloc=1 step0 window [0,255): nonzero=0/255 tagbytes=0 # all three runs step2 window [255,510): device words matched=62/62 a8 c4 5f 80 00 80 ff ff is the little-endian kernel text address ffff8000805fc4a8. The step-2 window is unaffected, so the disclosure is exactly the step-0 region. Zero the buffer, and require the step-0 transfer to deliver the full step0_resp_size bytes so a short data stage is reported as an error. Discovered by XBOW, triaged by Baul Lee <baul.lee@xbow.com> | ||||
| CVE-2026-80968 | 1 Linux | 1 Linux Kernel | 2026-09-11 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: mts64: Check card index validity at probe Although mts64 driver has a check of the given devptr->id value, it doesn't check for a negative id, which is often given as "none" or such value when bound via sysfs. This may lead to OOB access for index[] and other parameters. Add a sanity check for the card index and warn/correct it if it's a value out of the range. | ||||
| CVE-2026-80967 | 1 Linux | 1 Linux Kernel | 2026-09-11 | 4.1 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: pcxhr: initialize mutexes before requesting threaded IRQ pcxhr_probe() requests pcxhr_threaded_irq() before initializing mgr->lock, even though the threaded handler takes that mutex. Initialize the manager locks before request_threaded_irq() so an early interrupt cannot run against uninitialized mutex state during probe. | ||||
| CVE-2026-80966 | 1 Linux | 1 Linux Kernel | 2026-09-11 | 5.8 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: portman2x4: Check card index validity at probe Although portman2x4 driver has a check of the given devptr->id value, it doesn't check for a negative id, which is often given as "none" or such value when bound via sysfs. This may lead to OOB access for index[] and other parameters. Add a sanity check for the card index and warn/correct it if it's a value out of the range. | ||||
| CVE-2026-80965 | 1 Linux | 1 Linux Kernel | 2026-09-11 | 4.1 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: serial-u16550: Check card index validity at probe serial-u16550 driver blindly trusts that the given devptr->id value is within the proper card index range at probe. It's OK for the devices the driver itself creates at the module probe time, but if the device is bound manually via sysfs interface, this could be -1 as "none", and this leads to OOB access for index[] and other parameters. Add a sanity check for the card index and warn/correct it if it's a value out of the range. | ||||
| CVE-2026-80964 | 1 Linux | 1 Linux Kernel | 2026-09-11 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: virmidi: Check card index validity at probe virmidi driver blindly trusts that the given devptr->id value is within the proper card index range at probe. It's OK for the devices the driver itself creates at the module probe time, but if the device is bound manually via sysfs interface, this could be -1 as "none", and this leads to OOB access for index[] and other parameters. Add a sanity check for the card index and warn/correct it if it's a value out of the range. | ||||
| CVE-2026-80962 | 1 Linux | 1 Linux Kernel | 2026-09-11 | 6.0 Medium |
| In the Linux kernel, the following vulnerability has been resolved: dm-pcache: validate geometry fields from on-disk cache_info cache_segs_init() iterates cache_info->n_segs times indexing cache->segments[], which is sized to the cache device geometry, and get_seg_id() takes each segment id from the on-media cache_info and the per-segment next_seg link. Both come from cache device metadata that is only CRC-protected with a fixed public seed, so whoever supplies the cache device on a table load (CAP_SYS_ADMIN) controls them: an oversized n_segs or an out-of-range id drives an out-of-bounds access of cache->segments[] and a wild CACHE_DEV_SEGMENT() pointer into the device mapping -- an out-of-bounds read and write from on-disk data. Reject an n_segs that exceeds the device segment count and a segment id that is out of range before either is used. Valid metadata is unaffected. | ||||
| CVE-2026-80961 | 1 Linux | 1 Linux Kernel | 2026-09-11 | 2.3 Low |
| In the Linux kernel, the following vulnerability has been resolved: dm-pcache: validate kset key_num and intra-segment bounds Two more fields decoded from the cache device go unbounded. The kset key_num drives cache_kset_crc() and the replay loop in cache_replay(), the writeback worker and the GC worker, but only the magic and a fixed-seed CRC are checked first, so a non-last kset whose key_num exceeds the PCACHE_KSET_KEYS_MAX buffer reads past its end before the CRC compare. A key's intra-segment offset and length in cache_key_decode() are taken verbatim, so a key running past its segment is replayed into the cache tree and the data CRC check and every later read hit then copy adjacent persistent memory into the caller's bio -- an out-of-bounds read that leaks to user space. Both fields are controlled by whoever supplies the cache device (CAP_SYS_ADMIN); the CRC seed is public. Add kset_onmedia_valid() to bound key_num before any kset read, and reject a key whose offset plus length, computed in 64 bits, exceeds the segment data_size. Valid metadata is unaffected. | ||||