Export limit exceeded: 395628 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (395628 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-93098 | 1 Linux | 1 Linux Kernel | 2026-09-17 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: rpmsg: glink: fix deadlock in endpoint destroy during driver detach During driver detach, the device core holds the device mutex throughout the driver's remove callback chain. When the rpmsg endpoint is destroyed as part of that teardown, the GLINK endpoint destroy implementation attempts to unregister the underlying rpmsg device. That unregistration calls device_del(), which tries to re-acquire the same device mutex already held higher up the stack, causing rmmod to hang indefinitely. The deadlock manifests with the following call chain: [<0>] device_del+0x44/0x414 <- tries to acquire same mutex [<0>] device_unregister+0x18/0x34 [<0>] rpmsg_unregister_device+0x28/0x4c [<0>] qcom_glink_remove_rpmsg_device+0x70/0xc0 [<0>] qcom_glink_destroy_ept+0x58/0xbc [<0>] rpmsg_dev_remove+0x50/0x60 [<0>] device_remove+0x4c/0x80 [<0>] device_release_driver_internal+0x1cc/0x228 <- acquires device mutex [<0>] driver_detach+0x4c/0x98 [<0>] bus_remove_driver+0x6c/0xbc [<0>] driver_unregister+0x30/0x60 [<0>] unregister_rpmsg_driver+0x10/0x1c [<0>] fastrpc_exit+0x28/0x38 [fastrpc] [<0>] __arm64_sys_delete_module+0x1b8/0x294 [<0>] invoke_syscall+0x48/0x10c [<0>] el0_svc_common.constprop.0+0xc0/0xe0 [<0>] do_el0_svc+0x1c/0x28 [<0>] el0_svc+0x34/0x108 [<0>] el0t_64_sync_handler+0xa0/0xe4 [<0>] el0t_64_sync+0x198/0x19c The rpmsg device unregistration inside endpoint destroy is redundant. In both contexts where endpoint destruction is triggered: - Driver detach path: the driver core already tears down the rpmsg device. - Channel close path: the rpmsg device is already unregistered before endpoint destruction is reached. Remove the redundant unregistration to fix the deadlock. | ||||
| CVE-2026-93069 | 1 Linux | 1 Linux Kernel | 2026-09-17 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: OPP: Fix cleanup ordering Commit 173e02d67494 ("OPP: Initialize scope-based pointers inline") added initialization for all pointers. In some cases, the ordering was changed so that *opp_table was initialized after *opp. This also changes the order of the registered cleanup functions. When the cleanup happens, this can cause use-after-free errors when the last reference is released and the release function _opp_kref_release tries to access the already freed opp->opp_table. Initialize *opp_table before *opp again to fix this and ensure the correct cleanup order. | ||||
| CVE-2026-93048 | 1 Linux | 1 Linux Kernel | 2026-09-17 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: mtd: part: reject MTDPART_OFS_RETAIN in mtd_add_partition() mtd_add_partition() does not reject the special offset value MTDPART_OFS_RETAIN (-3), which leads to a WARN_ON in add_mtd_device() when called through the BLKPG ioctl on NAND devices. The RETAIN value depends on cur_offset being the end of the previous partition, but in the dynamic partition path cur_offset equals the offset argument itself, causing undefined behavior. Commit 5daa7b21496a ("mtd: prepare partition add and del functions for ioctl requests") introduced mtd_add_partition() and correctly rejected MTDPART_OFS_APPEND (-1) and MTDPART_OFS_NXTBLK (-2), since those special offsets rely on cur_offset tracking the previous partition's end. However, commit 1a31368bf92e ("mtd: add a flags for partitions which should just leave smth. after them") later added MTDPART_OFS_RETAIN (-3) for the static partition table path without updating mtd_add_partition() to also reject this value. With offset=-3 passed via BLKPG, the RETAIN size calculation in allocate_partition() underflows (parent_size - 0xFFFFFFFFFFFFFFFD = parent_size + 3). If the underflow result does not appear to leave enough space, allocate_partition() jumps to out_register via goto, skipping erasesize initialization. This results in erasesize=0, which triggers: WARN_ON((!mtd->erasesize || !master->_erase) && !(mtd->flags & MTD_NO_ERASE)) in add_mtd_device(). If the underflow result appears to leave enough space, a bogus partition size is calculated, but the "out of reach" sanity check catches the invalid offset and creates a disabled empty partition (offset=0, size=0) instead of returning an error. Fix this by adding MTDPART_OFS_RETAIN to the rejection list in mtd_add_partition(), consistent with the existing handling of APPEND and NXTBLK. | ||||
| CVE-2026-92524 | 1 Linux | 1 Linux Kernel | 2026-09-17 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: irqchip/gic-v3-its: Prevent leak in its_vpe_irq_domain_alloc() When its_irq_gic_domain_alloc() fails, the following its_vpe_irq_domain_free() fails to invoke its_vep_teardown() for the corresponding interrupt, which leaks the resource. Invoke its_vpe_teardown() in the error handling path to avoid the leak. [ tglx: Massaged change log ] | ||||
| CVE-2026-92476 | 1 Linux | 1 Linux Kernel | 2026-09-17 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: crypto: keembay - Initialize completion before requesting IRQ kmb_ocs_aes_probe() requests the device IRQ before initializing irq_completion. Once the handler is registered it can run immediately, and ocs_aes_irq_handler() unconditionally calls complete(). An interrupt in this window would therefore use an uninitialized completion. Initialize the completion before requesting the IRQ, as the sibling OCS HCU and ECC drivers already do. | ||||
| CVE-2026-90418 | 1 Linux | 1 Linux Kernel | 2026-09-17 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: nilfs2: fix BUG in nilfs_copy_dirty_pages() on dirty state mismatch Syzbot reported a kernel BUG triggered within nilfs_copy_dirty_pages(), which copies dirty DAT file folios/pages to its shadow page cache. The BUG occurs when a retrieved dirty folio/page unexpectedly loses its 'dirty' status. This issue arises because, since the commit referenced below, the 'dirty' flag of a folio/page can be cleared asynchronously after the filesystem detects metadata corruption and transitions to read-only mode. Resolve the issue by returning an -EROFS error if the filesystem has transitioned to read-only mode. Also change the behavior to issue a kernel warning only once instead of triggering a kernel BUG when this unexpected 'dirty' state is detected while the filesystem is not in read-only mode. | ||||
| CVE-2026-90375 | 1 Linux | 1 Linux Kernel | 2026-09-17 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: fix non-AQL packet accounting for MLO stations __mt76_tx_queue_skb() overrides the wcid passed by the driver with sta->drv_priv, so the wcid might incorrectly be changed after TX, causing wcid->non_aql_packets to be counted on the wrong wcid. For example, on the AP side, if a station's setup link is the 5G link and the station uses 2G to transmit a frame, the value of non_aql_packets is increased on the 5G wcid but decreased on the 2G wcid. Once the inflated counter exceeds MT_MAX_NON_AQL_PKT, the TX scheduler permanently refuses to service the station. Drop the reassignment and account on the wcid used for transmission. This also records the actual wcid in the queue entry. | ||||
| CVE-2026-90342 | 1 Linux | 1 Linux Kernel | 2026-09-17 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Fix mmap_lock deadlock on arena lock failure Reported by the Sashiko AI review. arena_vm_fault() returns VM_FAULT_RETRY when it can't take arena->spinlock, but it never took mmap_lock. The fault path assumes a VM_FAULT_RETRY handler already dropped mmap_lock and re-takes it on the retry, so mmap_lock gets taken twice and can deadlock: do_user_addr_fault() { fault = handle_mm_fault(...); // calls arena_vm_fault() if (fault & VM_FAULT_RETRY) goto retry; // re-locks mmap_lock mmap_read_unlock(mm); } Return VM_FAULT_SIGBUS instead, for two reasons: 1. We could keep VM_FAULT_RETRY, but then we'd have to drop the fault lock first and cap the retry ourselves, the way __folio_lock_or_retry() does. 2. A failed raw_res_spin_lock_irqsave() already means a possible deadlock was detected, so retrying just hits the same lock again. So returning VM_FAULT_RETRY here is overkill. | ||||
| CVE-2026-90303 | 1 Linux | 1 Linux Kernel | 2026-09-17 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ARM: 9485/1: mm: acquire mmap write lock around show_pte() for user faults When CONFIG_DEBUG_USER=y, and cmdline "user_debug=31" is set, a user fault may trigger show_pte() without any lock. If another thread in the same process concurrently calls munmap(), the page table pages may be freed while show_pte() is still traversing them, causing a use-after-free in show_pte(). If CONFIG_ARM_LPAE=y, this may cause a kernel panic if the pages table of PMD are freed when show_pte() is running. Acquire mmap_write_lock() around show_pte() for user faults to fix the contention. For user faults, additionally restrict that show_pte() is called only when the addr is a user-space address (addr < TASK_SIZE). This is because the lock of tsk->mm only protects the virtual memory of user address space, furthermore, dumping the page tables of a kernel-space address for user faults is unnecessary and may have security implications. Keep everything unchanged for kernel faults, because the kernel is already in the "oops" state, acquiring a lock may risk a deadlock. | ||||
| CVE-2026-90267 | 1 Linux | 1 Linux Kernel | 2026-09-17 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: scsi: sd: Fix special_vec mempool leak when scsi_alloc_sgtables() fails sd_set_special_bvec() allocates a special payload page for UNMAP and WRITE SAME commands. If scsi_alloc_sgtables() fails afterward in sd_setup_unmap_cmnd() or sd_setup_write_same{10,16}_cmnd(), the SCSI midlayer does not call uninit_command() because RQF_DONTPREP is not set yet, leaking the page. Call sd_uninit_command() on error, and clear RQF_SPECIAL_PAYLOAD after freeing the page. | ||||
| CVE-2026-90264 | 1 Linux | 1 Linux Kernel | 2026-09-17 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: always wait for ordered extents to avoid OE races [BUG] Syzbot reported a bug that there can be conflicting OEs for the same range: BTRFS critical (device loop4): panic in insert_ordered_extent:264: overlapping ordered extents, existing oe file_offset 16384 num_bytes 430080 flags 0x1089, new oe file_offset 16384 num_bytes 430080 flags 0x80 (errno=-17 Object alrea[ 179.162726][ T6897] BTRFS critical (device loop4): panic in insert_ordered_extent:264: overlapping ordered extents, existing oe file_offset 16384 num_bytes 430080 flags 0x1089, new oe file_offset 16384 num_bytes 430080 flags 0x80 (errno=-17 Object already exists) ------------[ cut here ]------------ kernel BUG at fs/btrfs/ordered-data.c:264! Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 05/09/2026 RIP: 0010:btrfs_alloc_ordered_extent+0x943/0xad0 Call Trace: <TASK> cow_file_range+0x744/0x12a0 fallback_to_cow+0x5ea/0xa00 run_delalloc_nocow+0x110c/0x17a0 btrfs_run_delalloc_range+0xbe4/0x1c20 writepage_delalloc+0x104d/0x1ba0 btrfs_writepages+0x1667/0x28b0 do_writepages+0x338/0x560 filemap_fdatawrite_range+0x1f2/0x300 btrfs_fdatawrite_range+0x54/0xf0 btrfs_direct_write+0x6a0/0xc30 btrfs_do_write_iter+0x329/0x790 do_iter_readv_writev+0x624/0x8d0 vfs_writev+0x34c/0x990 __se_sys_pwritev2+0x17a/0x2a0 do_syscall_64+0x174/0x580 entry_SYSCALL_64_after_hwframe+0x77/0x7f </TASK> ---[ end trace 0000000000000000 ]--- [CAUSE] Since commit ff66fe666233 ("btrfs: fix incorrect buffered IO fallback for append direct writes"), if the direct IO finished short, we will revert the isize back to the original one, so that append writes can be respected during the buffered fallback. Normally we rely on lock_and_cleanup_extent_if_need() function during buffered writeback to wait for any existing ordered extents. But that ordered extent waiting only happens if the start_pos is inside the isize. Since we have reverted the isize during failed direct IO, we will not wait for any ordered extents. This means we can have a race where the direct IO OE is still in the tree, finished but not yet removed, then we're inserting the OE for the buffered write, causing the above crash. [FIX] Make the OE wait to be unconditional, to handle the reverted isize situation. And since lock_and_cleanup_extent_if_need() now either lock the extents or return -EAGAIN, also remove the branches that handles no-extent-locked cases, and rename it to remove the "_if_need" suffix. The following micro benchmark shows the runtime difference for btrfs_buffered_write(), doing `xfs_io -f -c "pwrite 0 1m"` workload, all values are the average runtime in nano seconds. function runtime | before | after -----------------------------------+-------------+--------------- lock_and_cleanup_extent_if_need() | 58.2 | 183.0 btrfs_buffered_write() | 2115.6 | 2973.3 The overall runtime of btrfs_buffered_write() is still pretty tiny (still less than 3 micro seconds), I'd say the extra cost is still acceptable. An alternative to fix this problem is to wait ordered extents during iomap_end() where the isize revert is done. But that solution will break nowait requirement, as if a nowait direct IO finished short, we have to wait for the OEs unconditionally or the next append buffered IO can still hit the same problem. So here we have to move the wait cost to buffered write, but at least the code is slightly more streamline. | ||||
| CVE-2026-90233 | 1 Linux | 1 Linux Kernel | 2026-09-17 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: nvme-pci: release descriptor pools on probe failure The per-NUMA-node descriptor DMA pools are created lazily from nvme_init_hctx_common() once the admin tag set is allocated, but they are only destroyed in nvme_remove() via nvme_release_descriptor_pools(). Any probe failure after the admin tag set has been allocated unwinds through the out_disable label and nvme_pci_free_ctrl(), neither of which releases the pools, leaking the dma_pool objects. Release the descriptor pools in the out_disable error path. It must not be added to nvme_pci_free_ctrl(), as that would double-free against nvme_remove() on the normal teardown path. | ||||
| CVE-2026-90222 | 1 Linux | 1 Linux Kernel | 2026-09-17 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: nfc: pn533: hold a reference to the request skb during send_frame __pn533_send_async() publishes the command and then calls dev->phy_ops->send_frame(). Once dev->cmd is set, an incoming frame can be matched to this command: the I2C threaded IRQ runs pn533_recv_frame(), which queues cmd_complete_work, and pn533_send_async_complete() frees cmd->req with consume_skb(). On the I2C transport, pn533_i2c_send_frame() still dereferences the same skb after i2c_master_send() returns, so a completion that races the send can free the skb while the transport is still using it. The request skb is owned by the command object and may be freed by command completion at any time after dev->cmd is published, so the transport send path must not assume it stays alive. Hold a temporary reference to the request skb across the send_frame() call so the transport always sees a live skb even if completion races the send. Add a pn533_send_cmd_frame() helper and use it from all three send paths. | ||||
| CVE-2026-9314 | 2026-09-17 | N/A | ||
| This CVE ID has been rejected or withdrawn by its CVE Numbering Authority. | ||||
| CVE-2026-90165 | 1 Linux | 1 Linux Kernel | 2026-09-17 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: smb/server: fix invalid pointer dereference in ksmbd_stop_durable_scavenger() See the procedure below: ksmbd_launch_ksmbd_durable_scavenger durable_scavenger_running = true server_conf.dh_task = kthread_run() // fail, dh_task is an ERR_PTR() server_ctrl_handle_reset ksmbd_stop_durable_scavenger kthread_stop(server_conf.dh_task) // invalid pointer | ||||
| CVE-2026-90150 | 1 Linux | 1 Linux Kernel | 2026-09-17 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: pnfs/blocklayout: Fix device leaks on parse failure bl_parse_concat() and bl_parse_stripe() allocate a child device array and then parse each child in turn. If parsing a child fails, the failed child is not counted in nr_children and the parent may be left with a children array that bl_free_device() will not release when nr_children is zero. Release the failed child and the already parsed children before returning the error. Also make bl_free_device() release the child array whenever the children pointer is set, so that partially initialised concat or stripe devices are cleaned up correctly. bl_parse_scsi() can also fail after assigning d->bdev_file and dropping the file reference. Clear the pointer after fput() so that an outer cleanup path does not put it again. | ||||
| CVE-2026-90138 | 1 Linux | 1 Linux Kernel | 2026-09-17 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: vsock: don't check the listener's sk_err in vsock_accept() Syzbot reported an issue which can be reproduced with these steps: r0 = socket(AF_VSOCK, SOCK_STREAM, 0) bind(r0, {VMADDR_CID_ANY, PORT}) connect(r0, {VMADDR_CID_LOCAL, PORT}) -> -1, EPROTO (self-connect) listen(r0, backlog) -> 0 r1 = socket(AF_VSOCK, SOCK_STREAM, 0) connect(r1, {VMADDR_CID_LOCAL, PORT}) -> 0 accept(r0) -> -1, EPROTO (stale sk_err) Basically, it creates a socket (r0) and triggers a self-connect after binding it. This self-connect fails with EPROTO because it loops back to r0 while the socket is still in the TCP_SYN_SENT state, causing it to be incorrectly dispatched to the connecting-client path. The unexpected packet type encountered there sets sk_err to EPROTO. After that, it invokes a listen() call on the same socket. This listen() call succeeds because the kernel's listening path never inspects or clears sk_err. Then, a new socket (r1) is created as a normal client and connects to r0. However, vsock_accept() rejects this incoming connection because the listener's sk_err still holds the EPROTO error from the earlier failed self-connect. This rejection causes the child socket created for r1's connection to never be freed on virtio or hyperv transports; only the VMCI transport implements pending_work to revisit and clean up a rejected socket. For a non-blocking connect(), vsock_connect() may return -EINPROGRESS immediately, and vsock_connect_timeout() can later set sk->sk_err asynchronously. Since no vsock transport ever sets sk_err on a socket while it is in TCP_LISTEN state, checking it in vsock_accept() serves no purpose and only carries forward errors left behind by earlier, unrelated connection attempts on the same socket. Remove the checks so accept() no longer rejects valid incoming connections because of a stale error, which also avoids the resource leak described above. | ||||
| CVE-2026-90136 | 1 Linux | 1 Linux Kernel | 2026-09-17 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: platform/x86/amd/hsmp: Reject negative power cap writes in hwmon hsmp_hwmon_write() takes the user-supplied hwmon value as a signed long and assigns "val / MICROWATT_PER_MILLIWATT" to msg.args[0], which is a __u32. MICROWATT_PER_MILLIWATT is an unsigned long, so a negative write to power1_cap (e.g. "echo -1 > power1_cap") is first converted to a huge unsigned value by the division and then stored into the u32 argument. As a result a nonsensical, multi-gigawatt socket power limit is sent to the SMU via HSMP_SET_SOCKET_POWER_LIMIT instead of the write being rejected. Reject negative values with -EINVAL before the conversion. Tested with HSMP enabled: CAP=$(dirname $(grep -l amd_hsmp_hwmon \ /sys/class/hwmon/hwmon*/name | head -1))/power1_cap # negative write echo -1000000 > $CAP ; echo "ret=$?" # valid positive write must still work echo 400000000 > $CAP ; echo "ret=$?" Before: # echo -1000000 > $CAP ; echo "ret=$?" ret=0 <- accepted; bogus limit sent to SMU # echo 400000000 > $CAP ; echo "ret=$?" ret=0 After: # echo -1000000 > $CAP ; echo "ret=$?" bash: echo: write error: Invalid argument ret=1 <- rejected with -EINVAL # echo 400000000 > $CAP ; echo "ret=$?" ret=0 <- valid write still works | ||||
| CVE-2026-90135 | 1 Linux | 1 Linux Kernel | 2026-09-17 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net: add missing ref_tracker_dir_exit() to alloc_netdev_mqs() sashiko is reporting that trying to read /sys/kernel/debug/ref_tracker/* causes use-afer-free crash when either alloc_percpu() or dev_addr_init() in alloc_netdev_mqs() failed, for commit 4d92b95ff2f9 ("net: add net device refcount tracker infrastructure") added ref_tracker_dir_exit() to only free_netdev() path. | ||||
| CVE-2026-90130 | 1 Linux | 1 Linux Kernel | 2026-09-17 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: vdpa_sim: fix cleanup after worker creation failure vdpasim_create() leaves vdpasim->worker as an ERR_PTR when kthread_run_worker() fails. The error path then drops the device reference, which releases the partially initialized simulator. vdpasim_free() unconditionally passes the worker pointer to kthread_destroy_worker(), so the ERR_PTR is dereferenced and can trigger a general protection fault. Store the worker error, clear the pointer, and only clean up the worker when it was successfully initialized. Also make the release path tolerate partially initialized objects by guarding virtqueue and IOTLB cleanup, since the same release path can be reached from other initialization failures. I found this bug myself, though the patch was written with AI assistance. | ||||