Export limit exceeded: 18550 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (18550 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2022-50781 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: amdgpu/pm: prevent array underflow in vega20_odn_edit_dpm_table() In the PP_OD_EDIT_VDDC_CURVE case the "input_index" variable is capped at 2 but not checked for negative values so it results in an out of bounds read. This value comes from the user via sysfs. | ||||
| CVE-2022-50780 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: fix UAF issue in nfqnl_nf_hook_drop() when ops_init() failed When the ops_init() interface is invoked to initialize the net, but ops->init() fails, data is released. However, the ptr pointer in net->gen is invalid. In this case, when nfqnl_nf_hook_drop() is invoked to release the net, invalid address access occurs. The process is as follows: setup_net() ops_init() data = kzalloc(...) ---> alloc "data" net_assign_generic() ---> assign "date" to ptr in net->gen ... ops->init() ---> failed ... kfree(data); ---> ptr in net->gen is invalid ... ops_exit_list() ... nfqnl_nf_hook_drop() *q = nfnl_queue_pernet(net) ---> q is invalid The following is the Call Trace information: BUG: KASAN: use-after-free in nfqnl_nf_hook_drop+0x264/0x280 Read of size 8 at addr ffff88810396b240 by task ip/15855 Call Trace: <TASK> dump_stack_lvl+0x8e/0xd1 print_report+0x155/0x454 kasan_report+0xba/0x1f0 nfqnl_nf_hook_drop+0x264/0x280 nf_queue_nf_hook_drop+0x8b/0x1b0 __nf_unregister_net_hook+0x1ae/0x5a0 nf_unregister_net_hooks+0xde/0x130 ops_exit_list+0xb0/0x170 setup_net+0x7ac/0xbd0 copy_net_ns+0x2e6/0x6b0 create_new_namespaces+0x382/0xa50 unshare_nsproxy_namespaces+0xa6/0x1c0 ksys_unshare+0x3a4/0x7e0 __x64_sys_unshare+0x2d/0x40 do_syscall_64+0x35/0x80 entry_SYSCALL_64_after_hwframe+0x46/0xb0 </TASK> Allocated by task 15855: kasan_save_stack+0x1e/0x40 kasan_set_track+0x21/0x30 __kasan_kmalloc+0xa1/0xb0 __kmalloc+0x49/0xb0 ops_init+0xe7/0x410 setup_net+0x5aa/0xbd0 copy_net_ns+0x2e6/0x6b0 create_new_namespaces+0x382/0xa50 unshare_nsproxy_namespaces+0xa6/0x1c0 ksys_unshare+0x3a4/0x7e0 __x64_sys_unshare+0x2d/0x40 do_syscall_64+0x35/0x80 entry_SYSCALL_64_after_hwframe+0x46/0xb0 Freed by task 15855: kasan_save_stack+0x1e/0x40 kasan_set_track+0x21/0x30 kasan_save_free_info+0x2a/0x40 ____kasan_slab_free+0x155/0x1b0 slab_free_freelist_hook+0x11b/0x220 __kmem_cache_free+0xa4/0x360 ops_init+0xb9/0x410 setup_net+0x5aa/0xbd0 copy_net_ns+0x2e6/0x6b0 create_new_namespaces+0x382/0xa50 unshare_nsproxy_namespaces+0xa6/0x1c0 ksys_unshare+0x3a4/0x7e0 __x64_sys_unshare+0x2d/0x40 do_syscall_64+0x35/0x80 entry_SYSCALL_64_after_hwframe+0x46/0xb0 | ||||
| CVE-2023-54027 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: iio: core: Prevent invalid memory access when there is no parent Commit 813665564b3d ("iio: core: Convert to use firmware node handle instead of OF node") switched the kind of nodes to use for label retrieval in device registration. Probably an unwanted change in that commit was that if the device has no parent then NULL pointer is accessed. This is what happens in the stock IIO dummy driver when a new entry is created in configfs: # mkdir /sys/kernel/config/iio/devices/dummy/foo BUG: kernel NULL pointer dereference, address: ... ... Call Trace: __iio_device_register iio_dummy_probe Since there seems to be no reason to make a parent device of an IIO dummy device mandatory, let’s prevent the invalid memory access in __iio_device_register when the parent device is NULL. With this change, the IIO dummy driver works fine with configfs. | ||||
| CVE-2022-50779 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: orangefs: Fix kmemleak in orangefs_prepare_debugfs_help_string() When insert and remove the orangefs module, then debug_help_string will be leaked: unreferenced object 0xffff8881652ba000 (size 4096): comm "insmod", pid 1701, jiffies 4294893639 (age 13218.530s) hex dump (first 32 bytes): 43 6c 69 65 6e 74 20 44 65 62 75 67 20 4b 65 79 Client Debug Key 77 6f 72 64 73 20 61 72 65 20 75 6e 6b 6e 6f 77 words are unknow backtrace: [<0000000004e6f8e3>] kmalloc_trace+0x27/0xa0 [<0000000006f75d85>] orangefs_prepare_debugfs_help_string+0x5e/0x480 [orangefs] [<0000000091270a2a>] _sub_I_65535_1+0x57/0xf70 [crc_itu_t] [<000000004b1ee1a3>] do_one_initcall+0x87/0x2a0 [<000000001d0614ae>] do_init_module+0xdf/0x320 [<00000000efef068c>] load_module+0x2f98/0x3330 [<000000006533b44d>] __do_sys_finit_module+0x113/0x1b0 [<00000000a0da6f99>] do_syscall_64+0x35/0x80 [<000000007790b19b>] entry_SYSCALL_64_after_hwframe+0x46/0xb0 When remove the module, should always free debug_help_string. Should always free the allocated buffer when change the free_debug_help_string. | ||||
| CVE-2023-54057 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: iommu/amd: Add a length limitation for the ivrs_acpihid command-line parameter The 'acpiid' buffer in the parse_ivrs_acpihid function may overflow, because the string specifier in the format string sscanf() has no width limitation. Found by InfoTeCS on behalf of Linux Verification Center (linuxtesting.org) with SVACE. | ||||
| CVE-2025-40146 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: blk-mq: fix potential deadlock while nr_requests grown Allocate and free sched_tags while queue is freezed can deadlock[1], this is a long term problem, hence allocate memory before freezing queue and free memory after queue is unfreezed. [1] https://lore.kernel.org/all/0659ea8d-a463-47c8-9180-43c719e106eb@linux.ibm.com/ | ||||
| CVE-2023-54135 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: maple_tree: fix potential out-of-bounds access in mas_wr_end_piv() Check the write offset end bounds before using it as the offset into the pivot array. This avoids a possible out-of-bounds access on the pivot array if the write extends to the last slot in the node, in which case the node maximum should be used as the end pivot. akpm: this doesn't affect any current callers, but new users of mapletree may encounter this problem if backported into earlier kernels, so let's fix it in -stable kernels in case of this. | ||||
| CVE-2023-54053 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: iwlwifi: pcie: fix possible NULL pointer dereference It is possible that iwl_pci_probe() will fail and free the trans, then afterwards iwl_pci_remove() will be called and crash by trying to access trans which is already freed, fix it. iwlwifi 0000:01:00.0: Detected crf-id 0xa5a5a5a2, cnv-id 0xa5a5a5a2 wfpm id 0xa5a5a5a2 iwlwifi 0000:01:00.0: Can't find a correct rfid for crf id 0x5a2 ... BUG: kernel NULL pointer dereference, address: 0000000000000028 ... RIP: 0010:iwl_pci_remove+0x12/0x30 [iwlwifi] pci_device_remove+0x3e/0xb0 device_release_driver_internal+0x103/0x1f0 driver_detach+0x4c/0x90 bus_remove_driver+0x5c/0xd0 driver_unregister+0x31/0x50 pci_unregister_driver+0x40/0x90 iwl_pci_unregister_driver+0x15/0x20 [iwlwifi] __exit_compat+0x9/0x98 [iwlwifi] __x64_sys_delete_module+0x147/0x260 | ||||
| CVE-2023-54052 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7921: fix skb leak by txs missing in AMSDU txs may be dropped if the frame is aggregated in AMSDU. When the problem shows up, some SKBs would be hold in driver to cause network stopped temporarily. Even if the problem can be recovered by txs timeout handling, mt7921 still need to disable txs in AMSDU to avoid this issue. | ||||
| CVE-2022-50778 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: fortify: Fix __compiletime_strlen() under UBSAN_BOUNDS_LOCAL With CONFIG_FORTIFY=y and CONFIG_UBSAN_LOCAL_BOUNDS=y enabled, we observe a runtime panic while running Android's Compatibility Test Suite's (CTS) android.hardware.input.cts.tests. This is stemming from a strlen() call in hidinput_allocate(). __compiletime_strlen() is implemented in terms of __builtin_object_size(), then does an array access to check for NUL-termination. A quirk of __builtin_object_size() is that for strings whose values are runtime dependent, __builtin_object_size(str, 1 or 0) returns the maximum size of possible values when those sizes are determinable at compile time. Example: static const char *v = "FOO BAR"; static const char *y = "FOO BA"; unsigned long x (int z) { // Returns 8, which is: // max(__builtin_object_size(v, 1), __builtin_object_size(y, 1)) return __builtin_object_size(z ? v : y, 1); } So when FORTIFY_SOURCE is enabled, the current implementation of __compiletime_strlen() will try to access beyond the end of y at runtime using the size of v. Mixed with UBSAN_LOCAL_BOUNDS we get a fault. hidinput_allocate() has a local C string whose value is control flow dependent on a switch statement, so __builtin_object_size(str, 1) evaluates to the maximum string length, making all other cases fault on the last character check. hidinput_allocate() could be cleaned up to avoid runtime calls to strlen() since the local variable can only have literal values, so there's no benefit to trying to fortify the strlen call site there. Perform a __builtin_constant_p() check against index 0 earlier in the macro to filter out the control-flow-dependant case. Add a KUnit test for checking the expected behavioral characteristics of FORTIFY_SOURCE internals. | ||||
| CVE-2022-50772 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: netdevsim: fix memory leak in nsim_bus_dev_new() If device_register() failed in nsim_bus_dev_new(), the value of reference in nsim_bus_dev->dev is 1. obj->name in nsim_bus_dev->dev will not be released. unreferenced object 0xffff88810352c480 (size 16): comm "echo", pid 5691, jiffies 4294945921 (age 133.270s) hex dump (first 16 bytes): 6e 65 74 64 65 76 73 69 6d 31 00 00 00 00 00 00 netdevsim1...... backtrace: [<000000005e2e5e26>] __kmalloc_node_track_caller+0x3a/0xb0 [<0000000094ca4fc8>] kvasprintf+0xc3/0x160 [<00000000aad09bcc>] kvasprintf_const+0x55/0x180 [<000000009bac868d>] kobject_set_name_vargs+0x56/0x150 [<000000007c1a5d70>] dev_set_name+0xbb/0xf0 [<00000000ad0d126b>] device_add+0x1f8/0x1cb0 [<00000000c222ae24>] new_device_store+0x3b6/0x5e0 [<0000000043593421>] bus_attr_store+0x72/0xa0 [<00000000cbb1833a>] sysfs_kf_write+0x106/0x160 [<00000000d0dedb8a>] kernfs_fop_write_iter+0x3a8/0x5a0 [<00000000770b66e2>] vfs_write+0x8f0/0xc80 [<0000000078bb39be>] ksys_write+0x106/0x210 [<00000000005e55a4>] do_syscall_64+0x35/0x80 [<00000000eaa40bbc>] entry_SYSCALL_64_after_hwframe+0x46/0xb0 | ||||
| CVE-2025-68795 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ethtool: Avoid overflowing userspace buffer on stats query The ethtool -S command operates across three ioctl calls: ETHTOOL_GSSET_INFO for the size, ETHTOOL_GSTRINGS for the names, and ETHTOOL_GSTATS for the values. If the number of stats changes between these calls (e.g., due to device reconfiguration), userspace's buffer allocation will be incorrect, potentially leading to buffer overflow. Drivers are generally expected to maintain stable stat counts, but some drivers (e.g., mlx5, bnx2x, bna, ksz884x) use dynamic counters, making this scenario possible. Some drivers try to handle this internally: - bnad_get_ethtool_stats() returns early in case stats.n_stats is not equal to the driver's stats count. - micrel/ksz884x also makes sure not to write anything beyond stats.n_stats and overflow the buffer. However, both use stats.n_stats which is already assigned with the value returned from get_sset_count(), hence won't solve the issue described here. Change ethtool_get_strings(), ethtool_get_stats(), ethtool_get_phy_stats() to not return anything in case of a mismatch between userspace's size and get_sset_size(), to prevent buffer overflow. The returned n_stats value will be equal to zero, to reflect that nothing has been returned. This could result in one of two cases when using upstream ethtool, depending on when the size change is detected: 1. When detected in ethtool_get_strings(): # ethtool -S eth2 no stats available 2. When detected in get stats, all stats will be reported as zero. Both cases are presumably transient, and a subsequent ethtool call should succeed. Other than the overflow avoidance, these two cases are very evident (no output/cleared stats), which is arguably better than presenting incorrect/shifted stats. I also considered returning an error instead of a "silent" response, but that seems more destructive towards userspace apps. Notes: - This patch does not claim to fix the inherent race, it only makes sure that we do not overflow the userspace buffer, and makes for a more predictable behavior. - RTNL lock is held during each ioctl, the race window exists between the separate ioctl calls when the lock is released. - Userspace ethtool always fills stats.n_stats, but it is likely that these stats ioctls are implemented in other userspace applications which might not fill it. The added code checks that it's not zero, to prevent any regressions. | ||||
| CVE-2023-54134 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: autofs: fix memory leak of waitqueues in autofs_catatonic_mode Syzkaller reports a memory leak: BUG: memory leak unreferenced object 0xffff88810b279e00 (size 96): comm "syz-executor399", pid 3631, jiffies 4294964921 (age 23.870s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 08 9e 27 0b 81 88 ff ff ..........'..... 08 9e 27 0b 81 88 ff ff 00 00 00 00 00 00 00 00 ..'............. backtrace: [<ffffffff814cfc90>] kmalloc_trace+0x20/0x90 mm/slab_common.c:1046 [<ffffffff81bb75ca>] kmalloc include/linux/slab.h:576 [inline] [<ffffffff81bb75ca>] autofs_wait+0x3fa/0x9a0 fs/autofs/waitq.c:378 [<ffffffff81bb88a7>] autofs_do_expire_multi+0xa7/0x3e0 fs/autofs/expire.c:593 [<ffffffff81bb8c33>] autofs_expire_multi+0x53/0x80 fs/autofs/expire.c:619 [<ffffffff81bb6972>] autofs_root_ioctl_unlocked+0x322/0x3b0 fs/autofs/root.c:897 [<ffffffff81bb6a95>] autofs_root_ioctl+0x25/0x30 fs/autofs/root.c:910 [<ffffffff81602a9c>] vfs_ioctl fs/ioctl.c:51 [inline] [<ffffffff81602a9c>] __do_sys_ioctl fs/ioctl.c:870 [inline] [<ffffffff81602a9c>] __se_sys_ioctl fs/ioctl.c:856 [inline] [<ffffffff81602a9c>] __x64_sys_ioctl+0xfc/0x140 fs/ioctl.c:856 [<ffffffff84608225>] do_syscall_x64 arch/x86/entry/common.c:50 [inline] [<ffffffff84608225>] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 [<ffffffff84800087>] entry_SYSCALL_64_after_hwframe+0x63/0xcd autofs_wait_queue structs should be freed if their wait_ctr becomes zero. Otherwise they will be lost. In this case an AUTOFS_IOC_EXPIRE_MULTI ioctl is done, then a new waitqueue struct is allocated in autofs_wait(), its initial wait_ctr equals 2. After that wait_event_killable() is interrupted (it returns -ERESTARTSYS), so that 'wq->name.name == NULL' condition may be not satisfied. Actually, this condition can be satisfied when autofs_wait_release() or autofs_catatonic_mode() is called and, what is also important, wait_ctr is decremented in those places. Upon the exit of autofs_wait(), wait_ctr is decremented to 1. Then the unmounting process begins: kill_sb calls autofs_catatonic_mode(), which should have freed the waitqueues, but it only decrements its usage counter to zero which is not a correct behaviour. edit:imk This description is of course not correct. The umount performed as a result of an expire is a umount of a mount that has been automounted, it's not the autofs mount itself. They happen independently, usually after everything mounted within the autofs file system has been expired away. If everything hasn't been expired away the automount daemon can still exit leaving mounts in place. But expires done in both cases will result in a notification that calls autofs_wait_release() with a result status. The problem case is the summary execution of of the automount daemon. In this case any waiting processes won't be woken up until either they are terminated or the mount is umounted. end edit: imk So in catatonic mode we should free waitqueues which counter becomes zero. edit: imk Initially I was concerned that the calling of autofs_wait_release() and autofs_catatonic_mode() was not mutually exclusive but that can't be the case (obviously) because the queue entry (or entries) is removed from the list when either of these two functions are called. Consequently the wait entry will be freed by only one of these functions or by the woken process in autofs_wait() depending on the order of the calls. end edit: imk | ||||
| CVE-2023-54133 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: nfp: clean mc addresses in application firmware when closing port When moving devices from one namespace to another, mc addresses are cleaned in software while not removed from application firmware. Thus the mc addresses are remained and will cause resource leak. Now use `__dev_mc_unsync` to clean mc addresses when closing port. | ||||
| CVE-2023-54132 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: erofs: stop parsing non-compact HEAD index if clusterofs is invalid Syzbot generated a crafted image [1] with a non-compact HEAD index of clusterofs 33024 while valid numbers should be 0 ~ lclustersize-1, which causes the following unexpected behavior as below: BUG: unable to handle page fault for address: fffff52101a3fff9 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 23ffed067 P4D 23ffed067 PUD 0 Oops: 0000 [#1] PREEMPT SMP KASAN CPU: 1 PID: 4398 Comm: kworker/u5:1 Not tainted 6.3.0-rc6-syzkaller-g09a9639e56c0 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 03/30/2023 Workqueue: erofs_worker z_erofs_decompressqueue_work RIP: 0010:z_erofs_decompress_queue+0xb7e/0x2b40 ... Call Trace: <TASK> z_erofs_decompressqueue_work+0x99/0xe0 process_one_work+0x8f6/0x1170 worker_thread+0xa63/0x1210 kthread+0x270/0x300 ret_from_fork+0x1f/0x30 Note that normal images or images using compact indexes are not impacted. Let's fix this now. [1] https://lore.kernel.org/r/000000000000ec75b005ee97fbaa@google.com | ||||
| CVE-2023-54131 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: rt2x00: Fix memory leak when handling surveys When removing a rt2x00 device, its associated channel surveys are not freed, causing a memory leak observable with kmemleak: unreferenced object 0xffff9620f0881a00 (size 512): comm "systemd-udevd", pid 2290, jiffies 4294906974 (age 33.768s) hex dump (first 32 bytes): 70 44 12 00 00 00 00 00 92 8a 00 00 00 00 00 00 pD.............. 00 00 00 00 00 00 00 00 ab 87 01 00 00 00 00 00 ................ backtrace: [<ffffffffb0ed858b>] __kmalloc+0x4b/0x130 [<ffffffffc1b0f29b>] rt2800_probe_hw+0xc2b/0x1380 [rt2800lib] [<ffffffffc1a9496e>] rt2800usb_probe_hw+0xe/0x60 [rt2800usb] [<ffffffffc1ae491a>] rt2x00lib_probe_dev+0x21a/0x7d0 [rt2x00lib] [<ffffffffc1b3b83e>] rt2x00usb_probe+0x1be/0x980 [rt2x00usb] [<ffffffffc05981e2>] usb_probe_interface+0xe2/0x310 [usbcore] [<ffffffffb13be2d5>] really_probe+0x1a5/0x410 [<ffffffffb13be5c8>] __driver_probe_device+0x78/0x180 [<ffffffffb13be6fe>] driver_probe_device+0x1e/0x90 [<ffffffffb13be972>] __driver_attach+0xd2/0x1c0 [<ffffffffb13bbc57>] bus_for_each_dev+0x77/0xd0 [<ffffffffb13bd2a2>] bus_add_driver+0x112/0x210 [<ffffffffb13bfc6c>] driver_register+0x5c/0x120 [<ffffffffc0596ae8>] usb_register_driver+0x88/0x150 [usbcore] [<ffffffffb0c011c4>] do_one_initcall+0x44/0x220 [<ffffffffb0d6134c>] do_init_module+0x4c/0x220 Fix this by freeing the channel surveys on device removal. Tested with a RT3070 based USB wireless adapter. | ||||
| CVE-2023-53759 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: HID: hidraw: fix data race on device refcount The hidraw_open() function increments the hidraw device reference counter. The counter has no dedicated synchronization mechanism, resulting in a potential data race when concurrently opening a device. The race is a regression introduced by commit 8590222e4b02 ("HID: hidraw: Replace hidraw device table mutex with a rwsem"). While minors_rwsem is intended to protect the hidraw_table itself, by instead acquiring the lock for writing, the reference counter is also protected. This is symmetrical to hidraw_release(). | ||||
| CVE-2023-54050 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ubifs: Fix memleak when insert_old_idx() failed Following process will cause a memleak for copied up znode: dirty_cow_znode zn = copy_znode(c, znode); err = insert_old_idx(c, zbr->lnum, zbr->offs); if (unlikely(err)) return ERR_PTR(err); // No one refers to zn. Fetch a reproducer in [Link]. Function copy_znode() is split into 2 parts: resource allocation and znode replacement, insert_old_idx() is split in similar way, so resource cleanup could be done in error handling path without corrupting metadata(mem & disk). It's okay that old index inserting is put behind of add_idx_dirt(), old index is used in layout_leb_in_gaps(), so the two processes do not depend on each other. | ||||
| CVE-2023-53756 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: KVM: VMX: Fix crash due to uninitialized current_vmcs KVM enables 'Enlightened VMCS' and 'Enlightened MSR Bitmap' when running as a nested hypervisor on top of Hyper-V. When MSR bitmap is updated, evmcs_touch_msr_bitmap function uses current_vmcs per-cpu variable to mark that the msr bitmap was changed. vmx_vcpu_create() modifies the msr bitmap via vmx_disable_intercept_for_msr -> vmx_msr_bitmap_l01_changed which in the end calls this function. The function checks for current_vmcs if it is null but the check is insufficient because current_vmcs is not initialized. Because of this, the code might incorrectly write to the structure pointed by current_vmcs value left by another task. Preemption is not disabled, the current task can be preempted and moved to another CPU while current_vmcs is accessed multiple times from evmcs_touch_msr_bitmap() which leads to crash. The manipulation of MSR bitmaps by callers happens only for vmcs01 so the solution is to use vmx->vmcs01.vmcs instead of current_vmcs. BUG: kernel NULL pointer dereference, address: 0000000000000338 PGD 4e1775067 P4D 0 Oops: 0002 [#1] PREEMPT SMP NOPTI ... RIP: 0010:vmx_msr_bitmap_l01_changed+0x39/0x50 [kvm_intel] ... Call Trace: vmx_disable_intercept_for_msr+0x36/0x260 [kvm_intel] vmx_vcpu_create+0xe6/0x540 [kvm_intel] kvm_arch_vcpu_create+0x1d1/0x2e0 [kvm] kvm_vm_ioctl_create_vcpu+0x178/0x430 [kvm] kvm_vm_ioctl+0x53f/0x790 [kvm] __x64_sys_ioctl+0x8a/0xc0 do_syscall_64+0x5c/0x90 entry_SYSCALL_64_after_hwframe+0x63/0xcd | ||||
| CVE-2023-54048 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/bnxt_re: Prevent handling any completions after qp destroy HW may generate completions that indicates QP is destroyed. Driver should not be scheduling any more completion handlers for this QP, after the QP is destroyed. Since CQs are active during the QP destroy, driver may still schedule completion handlers. This can cause a race where the destroy_cq and poll_cq running simultaneously. Snippet of kernel panic while doing bnxt_re driver load unload in loop. This indicates a poll after the CQ is freed. [77786.481636] Call Trace: [77786.481640] <TASK> [77786.481644] bnxt_re_poll_cq+0x14a/0x620 [bnxt_re] [77786.481658] ? kvm_clock_read+0x14/0x30 [77786.481693] __ib_process_cq+0x57/0x190 [ib_core] [77786.481728] ib_cq_poll_work+0x26/0x80 [ib_core] [77786.481761] process_one_work+0x1e5/0x3f0 [77786.481768] worker_thread+0x50/0x3a0 [77786.481785] ? __pfx_worker_thread+0x10/0x10 [77786.481790] kthread+0xe2/0x110 [77786.481794] ? __pfx_kthread+0x10/0x10 [77786.481797] ret_from_fork+0x2c/0x50 To avoid this, complete all completion handlers before returning the destroy QP. If free_cq is called soon after destroy_qp, IB stack will cancel the CQ work before invoking the destroy_cq verb and this will prevent any race mentioned. | ||||