Export limit exceeded: 347563 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (347563 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-43042 | 1 Linux | 1 Linux Kernel | 2026-05-01 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: mpls: add seqcount to protect the platform_label{,s} pair The RCU-protected codepaths (mpls_forward, mpls_dump_routes) can have an inconsistent view of platform_labels vs platform_label in case of a concurrent resize (resize_platform_label_table, under platform_mutex). This can lead to OOB accesses. This patch adds a seqcount, so that we get a consistent snapshot. Note that mpls_label_ok is also susceptible to this, so the check against RTA_DST in rtm_to_route_config, done outside platform_mutex, is not sufficient. This value gets passed to mpls_label_ok once more in both mpls_route_add and mpls_route_del, so there is no issue, but that additional check must not be removed. | ||||
| CVE-2026-43041 | 1 Linux | 1 Linux Kernel | 2026-05-01 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net: qrtr: replace qrtr_tx_flow radix_tree with xarray to fix memory leak __radix_tree_create() allocates and links intermediate nodes into the tree one by one. If a subsequent allocation fails, the already-linked nodes remain in the tree with no corresponding leaf entry. These orphaned internal nodes are never reclaimed because radix_tree_for_each_slot() only visits slots containing leaf values. The radix_tree API is deprecated in favor of xarray. As suggested by Matthew Wilcox, migrate qrtr_tx_flow from radix_tree to xarray instead of fixing the radix_tree itself [1]. xarray properly handles cleanup of internal nodes — xa_destroy() frees all internal xarray nodes when the qrtr_node is released, preventing the leak. [1] https://lore.kernel.org/all/20260225071623.41275-1-jiayuan.chen@linux.dev/T/ | ||||
| CVE-2026-43040 | 1 Linux | 1 Linux Kernel | 2026-05-01 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net: ipv6: ndisc: fix ndisc_ra_useropt to initialize nduseropt_padX fields to zero to prevent an info-leak When processing Router Advertisements with user options the kernel builds an RTM_NEWNDUSEROPT netlink message. The nduseroptmsg struct has three padding fields that are never zeroed and can leak kernel data The fix is simple, just zeroes the padding fields. | ||||
| CVE-2026-43039 | 1 Linux | 1 Linux Kernel | 2026-05-01 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net: ti: icssg-prueth: fix missing data copy and wrong recycle in ZC RX dispatch emac_dispatch_skb_zc() allocates a new skb via napi_alloc_skb() but never copies the packet data from the XDP buffer into it. The skb is passed up the stack containing uninitialized heap memory instead of the actual received packet, leaking kernel heap contents to userspace. Copy the received packet data from the XDP buffer into the skb using skb_copy_to_linear_data(). Additionally, remove the skb_mark_for_recycle() call since the skb is backed by the NAPI page frag allocator, not page_pool. Marking a non-page_pool skb for recycle causes the free path to return pages to a page_pool that does not own them, corrupting page_pool state. The non-ZC path (emac_rx_packet) does not have these issues because it uses napi_build_skb() to wrap the existing page_pool page directly, requiring no copy, and correctly marks for recycle since the page comes from page_pool_dev_alloc_pages(). | ||||
| CVE-2026-43038 | 1 Linux | 1 Linux Kernel | 2026-05-01 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ipv6: icmp: clear skb2->cb[] in ip6_err_gen_icmpv6_unreach() Sashiko AI-review observed: In ip6_err_gen_icmpv6_unreach(), the skb is an outer IPv4 ICMP error packet where its cb contains an IPv4 inet_skb_parm. When skb is cloned into skb2 and passed to icmp6_send(), it uses IP6CB(skb2). IP6CB interprets the IPv4 inet_skb_parm as an inet6_skb_parm. The cipso offset in inet_skb_parm.opt directly overlaps with dsthao in inet6_skb_parm at offset 18. If an attacker sends a forged ICMPv4 error with a CIPSO IP option, dsthao would be a non-zero offset. Inside icmp6_send(), mip6_addr_swap() is called and uses ipv6_find_tlv(skb, opt->dsthao, IPV6_TLV_HAO). This would scan the inner, attacker-controlled IPv6 packet starting at that offset, potentially returning a fake TLV without checking if the remaining packet length can hold the full 18-byte struct ipv6_destopt_hao. Could mip6_addr_swap() then perform a 16-byte swap that extends past the end of the packet data into skb_shared_info? Should the cb array also be cleared in ip6_err_gen_icmpv6_unreach() and ip6ip6_err() to prevent this? This patch implements the first suggestion. I am not sure if ip6ip6_err() needs to be changed. A separate patch would be better anyway. | ||||
| CVE-2026-43037 | 1 Linux | 1 Linux Kernel | 2026-05-01 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ip6_tunnel: clear skb2->cb[] in ip4ip6_err() Oskar Kjos reported the following problem. ip4ip6_err() calls icmp_send() on a cloned skb whose cb[] was written by the IPv6 receive path as struct inet6_skb_parm. icmp_send() passes IPCB(skb2) to __ip_options_echo(), which interprets that cb[] region as struct inet_skb_parm (IPv4). The layouts differ: inet6_skb_parm.nhoff at offset 14 overlaps inet_skb_parm.opt.rr, producing a non-zero rr value. __ip_options_echo() then reads optlen from attacker-controlled packet data at sptr[rr+1] and copies that many bytes into dopt->__data, a fixed 40-byte stack buffer (IP_OPTIONS_DATA_FIXED_SIZE). To fix this we clear skb2->cb[], as suggested by Oskar Kjos. Also add minimal IPv4 header validation (version == 4, ihl >= 5). | ||||
| CVE-2026-43036 | 1 Linux | 1 Linux Kernel | 2026-05-01 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net: use skb_header_pointer() for TCPv4 GSO frag_off check Syzbot reported a KMSAN uninit-value warning in gso_features_check() called from netif_skb_features() [1]. gso_features_check() reads iph->frag_off to decide whether to clear mangleid_features. Accessing the IPv4 header via ip_hdr()/inner_ip_hdr() can rely on skb header offsets that are not always safe for direct dereference on packets injected from PF_PACKET paths. Use skb_header_pointer() for the TCPv4 frag_off check so the header read is robust whether data is already linear or needs copying. [1] https://syzkaller.appspot.com/bug?extid=1543a7d954d9c6d00407 | ||||
| CVE-2026-43035 | 1 Linux | 1 Linux Kernel | 2026-05-01 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net: sched: cls_api: fix tc_chain_fill_node to initialize tcm_info to zero to prevent an info-leak When building netlink messages, tc_chain_fill_node() never initializes the tcm_info field of struct tcmsg. Since the allocation is not zeroed, kernel heap memory is leaked to userspace through this 4-byte field. The fix simply zeroes tcm_info alongside the other fields that are already initialized. | ||||
| CVE-2026-43034 | 1 Linux | 1 Linux Kernel | 2026-05-01 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: bnxt_en: set backing store type from query type bnxt_hwrm_func_backing_store_qcaps_v2() stores resp->type from the firmware response in ctxm->type and later uses that value to index fixed backing-store metadata arrays such as ctx_arr[] and bnxt_bstore_to_trace[]. ctxm->type is fixed by the current backing-store query type and matches the array index of ctx->ctx_arr. Set ctxm->type from the current loop variable instead of depending on resp->type. Also update the loop to advance type from next_valid_type in the for statement, which keeps the control flow simpler for non-valid and unchanged entries. | ||||
| CVE-2026-43033 | 1 Linux | 1 Linux Kernel | 2026-05-01 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: crypto: authencesn - Do not place hiseq at end of dst for out-of-place decryption When decrypting data that is not in-place (src != dst), there is no need to save the high-order sequence bits in dst as it could simply be re-copied from the source. However, the data to be hashed need to be rearranged accordingly. Thanks, | ||||
| CVE-2026-43032 | 1 Linux | 1 Linux Kernel | 2026-05-01 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: NFC: pn533: bound the UART receive buffer pn532_receive_buf() appends every incoming byte to dev->recv_skb and only resets the buffer after pn532_uart_rx_is_frame() recognizes a complete frame. A continuous stream of bytes without a valid PN532 frame header therefore keeps growing the skb until skb_put_u8() hits the tail limit. Drop the accumulated partial frame once the fixed receive buffer is full so malformed UART traffic cannot grow the skb past PN532_UART_SKB_BUFF_LEN. | ||||
| CVE-2026-43031 | 1 Linux | 1 Linux Kernel | 2026-05-01 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net: xilinx: axienet: Fix BQL accounting for multi-BD TX packets When a TX packet spans multiple buffer descriptors (scatter-gather), axienet_free_tx_chain sums the per-BD actual length from descriptor status into a caller-provided accumulator. That sum is reset on each NAPI poll. If the BDs for a single packet complete across different polls, the earlier bytes are lost and never credited to BQL. This causes BQL to think bytes are permanently in-flight, eventually stalling the TX queue. The SKB pointer is stored only on the last BD of a packet. When that BD completes, use skb->len for the byte count instead of summing per-BD status lengths. This matches netdev_sent_queue(), which debits skb->len, and naturally survives across polls because no partial packet contributes to the accumulator. | ||||
| CVE-2026-43030 | 1 Linux | 1 Linux Kernel | 2026-05-01 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Fix regsafe() for pointers to packet In case rold->reg->range == BEYOND_PKT_END && rcur->reg->range == N regsafe() may return true which may lead to current state with valid packet range not being explored. Fix the bug. | ||||
| CVE-2026-43029 | 1 Linux | 1 Linux Kernel | 2026-05-01 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: mptcp: fix soft lockup in mptcp_recvmsg() syzbot reported a soft lockup in mptcp_recvmsg() [0]. When receiving data with MSG_PEEK | MSG_WAITALL flags, the skb is not removed from the sk_receive_queue. This causes sk_wait_data() to always find available data and never perform actual waiting, leading to a soft lockup. Fix this by adding a 'last' parameter to track the last peeked skb. This allows sk_wait_data() to make informed waiting decisions and prevent infinite loops when MSG_PEEK is used. [0]: watchdog: BUG: soft lockup - CPU#2 stuck for 156s! [server:1963] Modules linked in: CPU: 2 UID: 0 PID: 1963 Comm: server Not tainted 6.19.0-rc8 #61 PREEMPT(none) Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014 RIP: 0010:sk_wait_data+0x15/0x190 Code: 80 00 00 00 00 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 f3 0f 1e fa 41 56 41 55 41 54 49 89 f4 55 48 89 d5 53 48 89 fb <48> 83 ec 30 65 48 8b 05 17 a4 6b 01 48 89 44 24 28 31 c0 65 48 8b RSP: 0018:ffffc90000603ca0 EFLAGS: 00000246 RAX: 0000000000000000 RBX: ffff888102bf0800 RCX: 0000000000000001 RDX: 0000000000000000 RSI: ffffc90000603d18 RDI: ffff888102bf0800 RBP: 0000000000000000 R08: 0000000000000002 R09: 0000000000000101 R10: 0000000000000000 R11: 0000000000000075 R12: ffffc90000603d18 R13: ffff888102bf0800 R14: ffff888102bf0800 R15: 0000000000000000 FS: 00007f6e38b8c4c0(0000) GS:ffff8881b877e000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000055aa7bff1680 CR3: 0000000105cbe000 CR4: 00000000000006f0 Call Trace: <TASK> mptcp_recvmsg+0x547/0x8c0 net/mptcp/protocol.c:2329 inet_recvmsg+0x11f/0x130 net/ipv4/af_inet.c:891 sock_recvmsg+0x94/0xc0 net/socket.c:1100 __sys_recvfrom+0xb2/0x130 net/socket.c:2256 __x64_sys_recvfrom+0x1f/0x30 net/socket.c:2267 do_syscall_64+0x59/0x2d0 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x76/0x7e arch/x86/entry/entry_64.S:131 RIP: 0033:0x7f6e386a4a1d Code: 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 48 8d 05 f1 de 2c 00 41 89 ca 8b 00 85 c0 75 20 45 31 c9 45 31 c0 b8 2d 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 6b f3 c3 66 0f 1f 84 00 00 00 00 00 41 56 41 RSP: 002b:00007ffc3c4bb078 EFLAGS: 00000246 ORIG_RAX: 000000000000002d RAX: ffffffffffffffda RBX: 000000000000861e RCX: 00007f6e386a4a1d RDX: 00000000000003ff RSI: 00007ffc3c4bb150 RDI: 0000000000000004 RBP: 00007ffc3c4bb570 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000103 R11: 0000000000000246 R12: 00005605dbc00be0 R13: 00007ffc3c4bb650 R14: 0000000000000000 R15: 0000000000000000 </TASK> | ||||
| CVE-2026-43028 | 1 Linux | 1 Linux Kernel | 2026-05-01 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: x_tables: ensure names are nul-terminated Reject names that lack a \0 character before feeding them to functions that expect c-strings. Fixes tag is the most recent commit that needs this change. | ||||
| CVE-2026-43027 | 1 Linux | 1 Linux Kernel | 2026-05-01 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_conntrack_helper: pass helper to expect cleanup nf_conntrack_helper_unregister() calls nf_ct_expect_iterate_destroy() to remove expectations belonging to the helper being unregistered. However, it passes NULL instead of the helper pointer as the data argument, so expect_iter_me() never matches any expectation and all of them survive the cleanup. After unregister returns, nfnl_cthelper_del() frees the helper object immediately. Subsequent expectation dumps or packet-driven init_conntrack() calls then dereference the freed exp->helper, causing a use-after-free. Pass the actual helper pointer so expectations referencing it are properly destroyed before the helper object is freed. BUG: KASAN: slab-use-after-free in string+0x38f/0x430 Read of size 1 at addr ffff888003b14d20 by task poc/103 Call Trace: string+0x38f/0x430 vsnprintf+0x3cc/0x1170 seq_printf+0x17a/0x240 exp_seq_show+0x2e5/0x560 seq_read_iter+0x419/0x1280 proc_reg_read+0x1ac/0x270 vfs_read+0x179/0x930 ksys_read+0xef/0x1c0 Freed by task 103: The buggy address is located 32 bytes inside of freed 192-byte region [ffff888003b14d00, ffff888003b14dc0) | ||||
| CVE-2026-43026 | 1 Linux | 1 Linux Kernel | 2026-05-01 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: ctnetlink: zero expect NAT fields when CTA_EXPECT_NAT absent ctnetlink_alloc_expect() allocates expectations from a non-zeroing slab cache via nf_ct_expect_alloc(). When CTA_EXPECT_NAT is not present in the netlink message, saved_addr and saved_proto are never initialized. Stale data from a previous slab occupant can then be dumped to userspace by ctnetlink_exp_dump_expect(), which checks these fields to decide whether to emit CTA_EXPECT_NAT. The safe sibling nf_ct_expect_init(), used by the packet path, explicitly zeroes these fields. Zero saved_addr, saved_proto and dir in the else branch, guarded by IS_ENABLED(CONFIG_NF_NAT) since these fields only exist when NAT is enabled. Confirmed by priming the expect slab with NAT-bearing expectations, freeing them, creating a new expectation without CTA_EXPECT_NAT, and observing that the ctnetlink dump emits a spurious CTA_EXPECT_NAT containing stale data from the prior allocation. | ||||
| CVE-2026-43025 | 1 Linux | 1 Linux Kernel | 2026-05-01 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: ctnetlink: ignore explicit helper on new expectations Use the existing master conntrack helper, anything else is not really supported and it just makes validation more complicated, so just ignore what helper userspace suggests for this expectation. This was uncovered when validating CTA_EXPECT_CLASS via different helper provided by userspace than the existing master conntrack helper: BUG: KASAN: slab-out-of-bounds in nf_ct_expect_related_report+0x2479/0x27c0 Read of size 4 at addr ffff8880043fe408 by task poc/102 Call Trace: nf_ct_expect_related_report+0x2479/0x27c0 ctnetlink_create_expect+0x22b/0x3b0 ctnetlink_new_expect+0x4bd/0x5c0 nfnetlink_rcv_msg+0x67a/0x950 netlink_rcv_skb+0x120/0x350 Allowing to read kernel memory bytes off the expectation boundary. CTA_EXPECT_HELP_NAME is still used to offer the helper name to userspace via netlink dump. | ||||
| CVE-2026-43024 | 1 Linux | 1 Linux Kernel | 2026-05-01 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_tables: reject immediate NF_QUEUE verdict nft_queue is always used from userspace nftables to deliver the NF_QUEUE verdict. Immediately emitting an NF_QUEUE verdict is never used by the userspace nft tools, so reject immediate NF_QUEUE verdicts. The arp family does not provide queue support, but such an immediate verdict is still reachable. Globally reject NF_QUEUE immediate verdicts to address this issue. | ||||
| CVE-2026-43023 | 1 Linux | 1 Linux Kernel | 2026-05-01 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: SCO: fix race conditions in sco_sock_connect() sco_sock_connect() checks sk_state and sk_type without holding the socket lock. Two concurrent connect() syscalls on the same socket can both pass the check and enter sco_connect(), leading to use-after-free. The buggy scenario involves three participants and was confirmed with additional logging instrumentation: Thread A (connect): HCI disconnect: Thread B (connect): sco_sock_connect(sk) sco_sock_connect(sk) sk_state==BT_OPEN sk_state==BT_OPEN (pass, no lock) (pass, no lock) sco_connect(sk): sco_connect(sk): hci_dev_lock hci_dev_lock hci_connect_sco <- blocked -> hcon1 sco_conn_add->conn1 lock_sock(sk) sco_chan_add: conn1->sk = sk sk->conn = conn1 sk_state=BT_CONNECT release_sock hci_dev_unlock hci_dev_lock sco_conn_del: lock_sock(sk) sco_chan_del: sk->conn=NULL conn1->sk=NULL sk_state= BT_CLOSED SOCK_ZAPPED release_sock hci_dev_unlock (unblocked) hci_connect_sco -> hcon2 sco_conn_add -> conn2 lock_sock(sk) sco_chan_add: sk->conn=conn2 sk_state= BT_CONNECT // zombie sk! release_sock hci_dev_unlock Thread B revives a BT_CLOSED + SOCK_ZAPPED socket back to BT_CONNECT. Subsequent cleanup triggers double sock_put() and use-after-free. Meanwhile conn1 is leaked as it was orphaned when sco_conn_del() cleared the association. Fix this by: - Moving lock_sock() before the sk_state/sk_type checks in sco_sock_connect() to serialize concurrent connect attempts - Fixing the sk_type != SOCK_SEQPACKET check to actually return the error instead of just assigning it - Adding a state re-check in sco_connect() after lock_sock() to catch state changes during the window between the locks - Adding sco_pi(sk)->conn check in sco_chan_add() to prevent double-attach of a socket to multiple connections - Adding hci_conn_drop() on sco_chan_add failure to prevent HCI connection leaks | ||||