Export limit exceeded: 371797 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (371797 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-64462 | 1 Linux | 1 Linux Kernel | 2026-08-02 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: PCI: altera: Fix resource leaks on probe failure The chained IRQ handler is set during probe, but is only removed during the driver remove(). If pci_host_probe() fails, the handler and INTx IRQ domain remain set even though the devm-managed host bridge storage containing struct altera_pcie will be released, leaving the handler with a stale data pointer. Interrupts are also enabled before pci_host_probe() is called. If probe fails after that point, the controller interrupt source should be disabled before the chained handler and INTx domain are removed. So set the chained handler only after the INTx domain has been created. Disable controller interrupts during IRQ teardown, and tear the IRQ setup down if pci_host_probe() fails. [mani: commit log] | ||||
| CVE-2026-64468 | 1 Linux | 1 Linux Kernel | 2026-08-02 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: binder: fix UAF in binder_free_transaction() In binder_free_transaction(), the t->to_proc is read under the t->lock. However, once the t->lock is dropped, the to_proc can die in parallel. This leads to a use-after-free error when we attempt to acquire its inner lock right afterwards: ================================================================== BUG: KASAN: slab-use-after-free in _raw_spin_lock+0xe4/0x1a0 Write of size 4 at addr ffff00001125da70 by task B/672 CPU: 20 UID: 0 PID: 672 Comm: B Not tainted 7.1.0-rc6-00284-g8e65320d91cd #4 PREEMPT Hardware name: linux,dummy-virt (DT) Call trace: _raw_spin_lock+0xe4/0x1a0 binder_free_transaction+0x8c/0x320 binder_send_failed_reply+0x21c/0x2f8 binder_thread_release+0x488/0x7e0 binder_ioctl+0x12c0/0x29a0 [...] Allocated by task 675: __kmalloc_cache_noprof+0x174/0x444 binder_open+0x118/0xb70 do_dentry_open+0x374/0x1040 vfs_open+0x58/0x3bc [...] Freed by task 212: __kasan_slab_free+0x58/0x80 kfree+0x1a0/0x4a4 binder_proc_dec_tmpref+0x32c/0x5e0 binder_deferred_func+0xc48/0x104c process_one_work+0x53c/0xbc0 [...] ================================================================== To prevent this, pin the target thread (t->to_thread) to guarantee the target process remains alive. Undelivered transactions without a target thread are already safe, as the target process can only be the current context in those paths. | ||||
| CVE-2026-64472 | 1 Linux | 1 Linux Kernel | 2026-08-02 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: vfio/mlx5: Fix racy bitfields and tighten struct layout Bitfield operations are not atomic, they use a read-modify-write pattern, therefore we should be careful not to pack bitfields that can be concurrently updated into the same storage unit. This split takes a binary approach: flags that are only modified pre/post open/close remain bitfields, flags modified from user action, including actions that reach across to another device (ex. reset) use dedicated storage units. Note mlx5_vhca_page_tracker.status is relocated to fill the alignment hole this split exposes. Bitfield justifications: migrate_cap: written only in mlx5vf_cmd_set_migratable() at probe chunk_mode: written only in mlx5vf_cmd_set_migratable() at probe mig_state_cap: written only in mlx5vf_cmd_set_migratable() at probe Dedicated storage units: mdev_detach: written in the VF attach/detach event notifier mlx5fv_vf_event() at runtime log_active: written in mlx5vf_start_page_tracker()/ mlx5vf_stop_page_tracker() during runtime dirty tracking deferred_reset: written in mlx5vf_state_mutex_unlock()/ mlx5vf_pci_aer_reset_done() during runtime reset handling is_err: set by tracker error handling and dirty-log polling at runtime object_changed: set by tracker event handling and cleared by dirty-log polling at runtime | ||||
| CVE-2026-64475 | 1 Linux | 1 Linux Kernel | 2026-08-02 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: vfio/pci: Release the VGA arbiter client on register_device() failure The re-order in the Fixes commit below displaced vfio_pci_vga_init() as the last failure point of what is now vfio_pci_core_register_device() without introducing an unwind for the VGA arbiter registration. In current kernels this is mostly benign because vfio_pci_set_decode() only uses pci_dev state, but the original failure path could leave a callback with a freed vdev cookie. The stale registration also becomes unsafe again once the callback follows drvdata to the vfio device. Add the required VGA unwind callout. | ||||
| CVE-2026-64476 | 1 Linux | 1 Linux Kernel | 2026-08-02 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: vfio/pci: Latch disable_idle_d3 per device When disable_idle_d3 was introduced in vfio-pci, it directly manipulated the device power state with pci_set_power_state(). There were no refcounts to maintain or balanced operations, we could unconditionally bring the device to D0 and conditionally move it to D3hot. Therefore the module parameter was made writable. Later, in commit c61302aa48f7 ("vfio/pci: Move module parameters to vfio_pci.c"), as part of the vfio-pci-core split, the writable aspect of the module parameter was nullified. The parameter value could still be changed through sysfs, but the vfio-pci driver latched the values into vfio-pci-core globals at module init. Loading the vfio-pci module, or unloading and reloading, with non-default or different values could change the globals relative to existing devices bound to vfio-pci variant drivers. Runtime PM was introduced in commit 7ab5e10eda02 ("vfio/pci: Move the unused device into low power state with runtime PM"), which marks the point where power states became refcounted. PM get and put operations need to be balanced, but the same module operations noted above can change the global variables relative to those devices already bound to vfio-pci variant drivers. This introduces a window where PM operations can now become unbalanced. To resolve this with a narrow footprint for stable backports, the disable_idle_d3 flag is latched into the vfio_pci_core_device at the time of initialization, such that the device always operates with a consistent value. NB. vfio_pci_dev_set_try_reset() now unconditionally raises the runtime PM usage count around bus reset to account for disable_idle_d3 becoming a per-device rather than global flag. When this flag is set, the additional get/put pair is harmless and allows continued use of the shared vfio_pci_dev_set_pm_runtime_get() helper. | ||||
| CVE-2026-64481 | 1 Linux | 1 Linux Kernel | 2026-08-02 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: hda/cs35l41: Fix firmware load work teardown cs35l41_hda creates ALSA controls whose private data points at the cs35l41_hda object. The firmware load control can also queue fw_load_work. Those controls are not removed on component unbind, and device remove only cancels fw_load_work through cs35l41_remove_dsp(). That helper is skipped when halo_initialized is false. With firmware_autostart disabled, a firmware load can be requested before the DSP has been initialized. If the component or device is removed before the queued work runs, the worker can run after teardown and dereference driver state that is no longer valid. Track the created controls and remove them on unbind so no new control callback can reach the driver data or queue more work. Then cancel fw_load_work to drain any request that was already queued. Also cancel the work unconditionally during device remove before runtime PM teardown. | ||||
| CVE-2026-64491 | 1 Linux | 1 Linux Kernel | 2026-08-02 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: usx2y: us144mkii: fix work UAF on disconnect tascam_disconnect() cancels capture_work and midi_in_work before usb_kill_anchored_urbs() kills the capture/MIDI-in URBs. Those URBs self-resubmit, and their completion handlers reschedule the work. A URB that completes in the small window between cancel_work_sync() and usb_kill_anchored_urbs() therefore re-arms the work after its only cancel. Nothing cancels it again before snd_card_free() frees the card-private tascam structure, so the work handler then runs on freed memory. Kill the anchored URBs before cancelling the work; once the work is cancelled no remaining URB can complete to re-arm it. | ||||
| CVE-2026-64508 | 1 Linux | 1 Linux Kernel | 2026-08-02 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Support for hardening against JIT spraying The BPF JIT allocator packs many small programs into larger executable allocations and reuses space within those allocations as programs are loaded and freed. When fresh code is written into space that a previous program occupied, an indirect jump into the new program can reuse a branch prediction left behind by the old one. Flush the indirect branch predictors before reusing JIT memory so that indirect jumps into a newly written program don't reuse predictions from an old program that occupied the same space. Introduce bpf_arch_pred_flush_enabled static key and bpf_arch_pred_flush static call for flushing the branch predictors on JIT memory reuse. Architectures that need a flush, can update it to a predictor flush function. By default, its a NOP and does not emit any CALL. Allocations larger than a pack are not covered by this flush. That is safe because cBPF programs (the unprivileged attack surface) are bounded well below a pack size. Issue a warning if this assumption is ever violated while the flush is active. | ||||
| CVE-2026-68583 | 2026-08-02 | 5.4 Medium | ||
| luci-app-adblock-fast before 1.2.4-4 contains a stored cross-site scripting vulnerability in the blocklist name field that allows lower-privileged users to inject active HTML. When an administrator views the AdBlock Fast status page, the injected payload executes in the administrator's browser under the LuCI origin. | ||||
| CVE-2026-68582 | 1 Vikunja | 1 Vikunja | 2026-08-02 | 6.5 Medium |
| Vikunja versions >= 0.24.0 and <= 2.3.0 contain a broken object level authorization (BOLA) vulnerability in the task-collection endpoint (GET /api/v1/projects/{project}/views/{view}/tasks). The endpoint loads the requested project view from the URL path without verifying the caller is authorized for it. For a link-share token holder, the task scope is pinned to the share's own project, but the view is taken from the attacker-controlled path and never re-validated. As a result, a holder of any project share link can read any other tenant's kanban bucket records — bucket titles and the full created_by user object (username, name, id) — for every view in the instance. The same missing pre-authorization view load also creates a project/view-ID existence oracle (404 vs. non-404) usable by link shares and ordinary authenticated users. Task contents remain constrained to the share's own project and are not disclosed. Fixed in 2.4.0. | ||||
| CVE-2026-68581 | 1 Vikunja | 1 Vikunja | 2026-08-02 | 8.1 High |
| Vikunja versions 0.22.0 through 2.3.0 fail to validate the principal type in API token management. Because user IDs and link-share IDs are independent numeric sequences and both resolve through a generic web.Auth.GetID() interface, a link-share JWT whose numeric ID equals a target user's ID is treated as that user by the /api/v1/tokens endpoints. An authenticated attacker can obtain a target's numeric user ID via authenticated user search, then create link shares on an attacker-writable project until the link-share sequence reaches that value, and use the resulting link-share JWT to list, create, and delete the target user's API tokens (including issuing a new token with attacker-chosen scopes under the target's permissions). Fixed in version 2.4.0. | ||||
| CVE-2026-68580 | 1 Freerdp | 1 Freerdp | 2026-08-02 | 7.5 High |
| FreeRDP before 3.29.0 contains integer overflow vulnerabilities in the audio input redirection channel (audin) across ALSA, sndio, WinMM, and OpenSL ES backends that fail to validate the FramesPerPacket parameter from RDP servers. Attackers can supply a malicious FramesPerPacket value causing allocation size wraparound, resulting in heap-based buffer overflow on ALSA or denial of service on all platforms. | ||||
| CVE-2026-68579 | 1 Freerdp | 1 Freerdp | 2026-08-02 | 9.6 Critical |
| FreeRDP before 3.30.0 (<= 3.29.0) contains a heap-based buffer overflow in the Windows clipboard client's CliprdrStream_Read function (client/Windows/wf_cliprdr.c). When an OLE paste consumer (e.g. explorer.exe) calls IStream::Read with a fixed-size buffer of cb bytes, CliprdrStream_Read requests file contents from the RDP server and then copies the response into the caller's buffer using the server-supplied length (req_fsize) instead of cb. A malicious or compromised RDP server can return an oversized CB_FILECONTENTS_RESPONSE, causing an out-of-bounds write of attacker-controlled data into the paste consumer's heap buffer when a user pastes server-offered clipboard file contents. | ||||
| CVE-2026-68578 | 2026-08-02 | 7.5 High | ||
| ArcadeDB versions before 26.7.3 fail to bind the authenticated principal in the MCP HTTP transport, causing all engine permission checks to silently pass as no-ops. Non-root MCP-allowed users can perform arbitrary database writes, DDL, schema mutations, and execute arbitrary JavaScript code via the query tool. | ||||
| CVE-2026-67357 | 2026-08-02 | 7.5 High | ||
| ArcadeDB versions before 26.7.3 contain an information disclosure vulnerability in the MCP get_server_settings tool that leaks the arcadedb.ha.clusterToken in cleartext. Attackers with MCP access can retrieve the cluster token and use it with X-ArcadeDB-Cluster-Token and X-ArcadeDB-Forwarded-User headers to impersonate root and achieve full server compromise. | ||||
| CVE-2026-67356 | 2026-08-02 | 8.8 High | ||
| ArcadeDB before 26.7.3 binds the real LocalDatabase object into JavaScript trigger contexts with HostAccess.ALL, allowing schema-admins to call getSecurity().createUser() without permission checks. Attackers with UPDATE_SCHEMA permission can create triggers that execute JavaScript to create server-wide admin users, escalating privileges beyond their authorization level. | ||||
| CVE-2025-71401 | 1 Better-auth | 1 Better-auth\/oauth-provider | 2026-08-02 | 5.9 Medium |
| better-auth (npm) before 1.4.2 allows an external request to configure baseURL when it is not otherwise defined (e.g., BETTER_AUTH_URL is unset). An attacker able to make the very first request to the server after startup can poison the router's base path, causing all routes to return 404 for all users (denial of service). The issue is not reachable when baseURL is explicitly configured or on typical managed hosting platforms. | ||||
| CVE-2025-71400 | 1 Better-auth | 1 Better-auth\/oauth-provider | 2026-08-02 | 7.1 High |
| better-auth passkey versions before 1.4.0 contain an insecure direct object reference vulnerability in the passkey deletion endpoint that allows authenticated users to delete arbitrary passkeys by ID. Attackers with valid sessions can submit crafted requests to the delete-passkey endpoint with enumerated passkey IDs to remove other users' passkeys. | ||||
| CVE-2025-71399 | 1 Better-auth | 1 Better-auth\/oauth-provider | 2026-08-02 | 8.6 High |
| Better Auth relies on better-call, which uses the rou3 router library. In affected versions of rou3, paths are normalized by removing empty segments, so /path, //path, and ///path resolve to the same route. In Better Auth versions prior to 1.4.5 (which bundles the fixed rou3), this can allow attackers to bypass disabledPaths configuration and path-based rate limits by submitting requests with extra slashes in the URL path. The issue does not apply in deployments where the proxy or platform normalizes URLs by collapsing multiple slashes. | ||||
| CVE-2026-64516 | 1 Linux | 1 Linux Kernel | 2026-08-02 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu/vce1: Fix VCE 1 firmware size and offsets The VCPU BO contains the actual FW at an offset, but it was not calculated into the VCPU BO size. Subtract this from the FW size to make sure there is no out of bounds access. Make sure the stack and data offsets are aligned to the 32K TLB size. Check that the FW microcode actually fits in the space that is reserved for it. (cherry picked from commit c16fe59f622a080fc457a57b3e8f14c780699449) | ||||