Export limit exceeded: 429693 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (429693 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-99667 | 1 Linux | 1 Linux Kernel | 2026-11-20 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: mm/khugepaged: always recheck the pmd in try_collapse_pte_mapped_thp() try_collapse_pte_mapped_thp() drops the PTE lock after it has cleared the page table, and takes the PMD lock and the PTE lock to remove it. In between, MADV_DONTNEED with CONFIG_PT_RECLAIM can reclaim the page table. The pmd_same() check is supposed to handle this, but it is only done with CONFIG_SPLIT_PTE_PTLOCKS. Fix it by performing the check unconditionally. Fix generated by an LLM and sent by Josef Bacik in private. [ david: adjust description ] | ||||
| CVE-2026-99666 | 1 Linux | 1 Linux Kernel | 2026-11-20 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: mm/khugepaged: fix PMD table lock leak in try_collapse_pte_mapped_thp() For a private mapping with userfaultfd, try_collapse_pte_mapped_thp() takes the PMD table lock before it maps the page table for the second time. If that (pte_offset_map_rw_nolock) fails, because the page table vanished in the meantime due to concurrent page table reclaim, it leaves through the abort label, where the PMD table lock is unlocked if it differs from PTE table lock. In case the PMD table lock and the PTE table lock match, which is the case without CONFIG_SPLIT_PTE_PTLOCKS after pte_offset_map_rw_nolock() failed, we miss to unlock the PMD table. To fix it, forget the PTE table lock when we unmap+unlock the PTE table. Fix generated by an LLM and sent by Josef Bacik in private. [ david: move the ptl = NULL handling; rewrite description, drop wrong comments ] | ||||
| CVE-2026-99665 | 1 Linux | 1 Linux Kernel | 2026-11-20 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: mm/khugepaged: preserve dirty bits when collapsing PTE-mapped THPs try_collapse_pte_mapped_thp() clears PTEs without transferring their dirty bits to the folio. A shmem read fault can map a clean folio writable, so a later store only dirties the PTE. Losing that dirty bit allows reclaim to discard modified data. The assumption that regular files are read-only is also obsolete since commit 1b6444331bebb ("mm/khugepaged: enable clean pagecache folio collapse for writable files"). In any case, transferring PTE dirty bits to the folio when removing mappings (and while the folio is still mapped) is the right thing to do. Use get_and_clear_ptes() to collect the dirty bits and mark the folio dirty before unmapping it. Update the comment. This was reproduced with shmem using MADV_COLLAPSE followed by MADV_PAGEOUT. Fix generated by an LLM and sent by Chris Mason in private. [ david: adjust comment; simplify description; cover file-thp as well ] | ||||
| CVE-2026-99664 | 1 Linux | 1 Linux Kernel | 2026-11-20 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: mm/gup: recheck the PUD under PTL in follow_pud_mask() follow_pud_mask() reads the PUD without a lock. If it is a leaf, it takes the lock and calls follow_huge_pud(), which reads the entry again, but only tests whether it is present. A leaf can be zapped concurrently and a page fault can fill the empty entry with a page table. This currently only applies when device-dax makes use of PUD entries, and the fault after e.g., MADV_DONTNEED would find THPs to be disabled. That requires a sequence like 1) Fault in the PUD 2) Disable THP 3) Have GUP race against concurrent MADV_DONTNEED + refault Which is rather unlikely to happen in practice, which is why we never received a report about such a problem. Before commit 1b1676180246 ("mm/gup: handle huge pud for follow_pud_mask()"), we performed that check in follow_devmap_pud() by testing for pud_devmap(). Let's fix it by just structuring follow_pud_mask() similar to follow_pmd_mask(), minus protnone stuff that does not apply and minus FOLL_SPLIT_PMD handling. That makes it much easier to spot any such inconsistencies. Perform the pud_bad() check early in follow_pmd_mask() and just forward the PUD value. We can drop the pud_present() check in follow_huge_pud(), just like we have in follow_huge_pmd(). Even though we are performing more changes than strictly necessary, the fix should be easy to backport. | ||||
| CVE-2026-99663 | 1 Linux | 1 Linux Kernel | 2026-11-20 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: mm/gup: fix clearing folios in memfd_pin_folios() memfd_pin_folios() pins folios obtained directly from the page cache without checking whether they are uptodate. However, shmem fallocate() can leave newly allocated folios uncleared and not uptodate. Callers such as udmabuf can then expose uninitialized memory to userspace. Clear non-uptodate folios and mark them uptodate under the folio lock before returning them to the caller. Fix generated by an LLM and sent by Chris Mason in private. [ david: simplify description and comment ] | ||||
| CVE-2026-99662 | 1 Linux | 1 Linux Kernel | 2026-11-20 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: mm/gup: fix out-of-bounds write for nr_pages == 0 in GUP-fast With nr_pages == 0, GUP-fast still enters its page table walk and can write past the caller's page array. The old end <= start check caught empty ranges, but was replaced with an overflow check. Users such as OrangeFS can pass a zero page count derived from a userspace-supplied length. So let's return zero for nr_pages == 0 before starting the walk, just like GUP-slow. Fix generated by an LLM and sent by Chris Mason in private. [ david: simplify description ] | ||||
| CVE-2026-99661 | 1 Linux | 1 Linux Kernel | 2026-11-20 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: mm/gup: check for overflow when converting nr_pages to bytes in GUP-fast The overflow check in gup_fast_fallback() only covers the addition to start. The preceding nr_pages << PAGE_SHIFT can already have truncated the length on 32bit. Users such as RapidIO's rio_dma_transfer() can derive such page counts from a 64-bit userspace length. Let's just check_shl_overflow() to reject any such overflow with -EOVERFLOW early. | ||||
| CVE-2026-99660 | 1 Linux | 1 Linux Kernel | 2026-11-20 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: mm/userfaultfd: write-lock the VMA before waking waiters when unregistering userfaultfd_unregister() wakes pending missing faults before clearing the VMA's userfaultfd registration. With per-VMA fault locking, holding mmap_lock for write does not prevent another fault from queuing after the wakeup but before userfaultfd_clear_vma() write-locks the VMA. That waiter can then remain asleep indefinitely. Call vma_start_write() before waking waiters. Existing fault handlers queue themselves before dropping the VMA read lock, and new readers are excluded until mmap_write_unlock(). | ||||
| CVE-2026-99657 | 1 Linux | 1 Linux Kernel | 2026-11-20 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: mm/mmu_notifier: set ->mm only after mmgrab() Radeon uses a non-NULL notifier->mm to decide whether to call mmu_interval_notifier_remove() when freeing a buffer object. __mmu_interval_notifier_insert() sets ->mm before validating the range, so a wrapping userptr range can leave ->mm set after insertion fails. Cleanup then tries to remove an unregistered notifier for which no mm reference was acquired. Set ->mm only after mmgrab(), once insertion can no longer fail. While we could fix radeon's code instead, setting ->mm on success only makes the code more robust. Fix generated by an LLM and sent by Chris Mason in private. [ david: simplify description ] | ||||
| CVE-2026-99651 | 1 Linux | 1 Linux Kernel | 2026-11-20 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: mm/ksm: reset the unstable trees of all nodes Each full scan resets ksm_nr_node_ids unstable tree roots. Enabling merge_across_nodes resets this count to 1, even if per-node roots were previously allocated. So when toggling "merge_across_nodes" 0 -> 1 -> 0, a scan that starts while the setting is 1 and continues after switching back to 0 can encounter stale unstable tree roots, resulting in UAF. Only root is allowed to change "merge_across_nodes", and the documented sequence is: "merge_across_nodes setting can be changed only when there are no ksm shared pages in the system: set run 2 to unmerge pages first, then to 1 after changing merge_across_nodes, to remerge according to the new setting." Let's fix it by tracking in ksm_nr_node_ids the actual number of allocated tree roots. remove_all_stable_nodes() and ksm_check_stable_tree() will now scan more tree roots (skipping the empty ones), which is harmless. | ||||
| CVE-2026-99645 | 1 Linux | 1 Linux Kernel | 2026-11-20 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: mm/cma: don't release CMA pages still in use When a driver calls dma_free_contiguous() before quiescing DMA, the page might still have a reference from the device. put_page_testzero() there returns false, WARN fires, but the code proceeds to free_contig_frozen_range() putting a live page onto buddy and clearing the bitmap. A subsequent allocation can hand the same PFN to a new owner while the original holder still references it. A concurrent put_page() that drops the last reference between the testzero loop and free_contig_frozen_range() can double-queue the page via page->lru, corrupting buddy lists. Avoid the corruption by not freeing a CMA region if any of the pages inside are still in use. Make it explicit in the warning that the driver allowed a leak. While at it, use page_ref_freeze() to make the semantics clearer and switch to pr_warn_ratelimited(). [ david: use page_ref_freeze() + pr_warn_ratelimited() ] | ||||
| CVE-2026-99644 | 1 Linux | 1 Linux Kernel | 2026-11-20 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: mm/memory-tiers: unregister empty tiers outside memory_tier_lock When offlining a node's last memory empties its tier, clear_node_memory_tier() calls device_unregister() while holding memory_tier_lock. A concurrent sysfs read can hold a kernfs active reference and block in nodelist_show() on that mutex. device_unregister() then waits in kernfs_drain() for the read to finish and release its active reference, while the reader waits for the offlining task to release the mutex. Return the node's former tier from clear_node_memory_tier(), making the helper more similar to set_node_memory_tier(), which also returns a memory_tier pointer. Let the caller unlink an empty tier under memory_tier_lock before rebuilding demotion targets, then unregister its device after dropping the lock. | ||||
| CVE-2026-99642 | 1 Linux | 1 Linux Kernel | 2026-11-20 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: mm/gup: check folio->mapping under folio lock in memfd_pin_folios() memfd_pin_folios() pins folios from the page cache without taking the folio lock. khugepaged or MADV_COLLAPSE can therefore replace a folio after checking its refcount while memfd_pin_folios() still pins the old folio. The caller then receives a folio which is no longer part of the memfd. For udmabuf and iommufd, this can cause data corruption: DMA accesses the detached folio rather than the live memfd contents. DMA reads can return stale data, while DMA writes update the detached copy and are lost from the live memfd. The detached folio remains pinned, so these accesses do not constitute a use-after-free or target another application's memory. For memfd live update, the stale contents can reappear in the memfd after handover. Lock the folio and recheck folio->mapping before pinning it, like other page cache users do. If the folio was removed, retry the folio lookup from the index that was removed. | ||||
| CVE-2026-99641 | 1 Linux | 1 Linux Kernel | 2026-11-20 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ovl: fail the mount if the casefold flag has changed An unprivileged user in a user namespace can repeatedly trigger a kernel warning with their own overlay mounts. They do so by changing the casefold flag of the topmost layer's empty root, the top directory of that layer, after the layers are set and before the mount is created. The casefold flag of a directory makes name lookups in that directory case-insensitive. All layers of an overlay must agree on casefolding. ovl_mount_dir_check() reads the casefold flag of a layer root when fsconfig() sets that layer, and saves the result in ofs->casefold. The mount is created later, by another fsconfig() call with FSCONFIG_CMD_CREATE. The casefold flag of an empty directory can be changed. The casefold flag of the overlay root must match ofs->casefold. ovl_get_root() copies the flag from the topmost layer root, as it is when the mount is created. On a mismatch, ovl_get_root() only does a WARN_ON(), and the mount continues. The check is not a WARN_ON_ONCE(), so each such mount warns again. An unprivileged user needs CONFIG_UNICODE, and a tmpfs mounted with the casefold option in their namespace. Reproduced by changing the casefold flag of the empty upper directory after the layers were set and before FSCONFIG_CMD_CREATE, with tmpfs and ext4 layers, and as uid 1000 in a user namespace. Fix this by replacing the WARN_ON() with a check that fails the mount with -EINVAL. | ||||
| CVE-2026-99640 | 1 Linux | 1 Linux Kernel | 2026-11-20 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ovl: do not let chattr change the casefold flag chattr +F or -F on an overlay directory can make the directory, or the whole mount, unusable. Lookups of the directory, and lookups in it, then fail. From code inspection, the caller only needs to own the directory. The upper filesystem must support casefolding: ext4 or f2fs with the casefold feature, or tmpfs with the casefold option. chattr +F and -F set and clear FS_CASEFOLD_FL, the casefold flag of a directory. The flag enables casefolding (case-insensitive name lookup) for the directory. All directories of an overlay must match the casefold state that was recorded at mount time, and ovl_lookup_single() enforces this: - A lookup in a directory that does not match fails with -ESTALE. - A lookup of the directory itself fails with -EREMOTE. ovl_fileattr_set() copies the directory up, which creates it in the upper layer if it only existed in a lower layer. It then passes FS_CASEFOLD_FL on to the upper filesystem. The upper filesystem accepts the change if the upper directory is empty, regardless of what the merged directory contains. The merged directory is the one that the user sees, with the names from the upper and the lower directories. After the change the upper directory no longer matches the mount. If the directory is the root of the overlay, the whole mount is affected. The flag can also change without chattr +F or -F. chattr reads all flags of a directory, changes one and writes all of them back. For a directory that only exists in a lower layer, overlayfs reads the flags from the lower filesystem. xfs with the ascii-ci feature reports FS_CASEFOLD_FL on every inode, but never sets S_CASEFOLD, the inode flag that overlayfs compares with the mount. So its directories count as not casefolded. With a lower layer on such an xfs and an upper layer on ext4 with the casefold feature, chattr +A on a lower-only directory therefore sets FS_CASEFOLD_FL on the new, empty upper directory. Reproduced as root on tmpfs and on ext4 with chattr +F or -F on an overlay directory whose upper directory was empty. Afterwards lookups below it failed with ESTALE, and lookups of the directory itself failed with EREMOTE. The chattr +A case was seen once, on a kernel with an earlier form of this patch that still passed the caller's flag on: lookups of the directory failed with EREMOTE. Fix this by returning -EOPNOTSUPP if FS_IOC_SETFLAGS, the only call that can change the flag, asks for a casefold flag on a directory that does not agree with the casefold state of the mount. This also refuses the chattr +A case above. [amir: check the flag against the casefold state of the mount instead of reading back the flags] | ||||
| CVE-2026-99638 | 1 Linux | 1 Linux Kernel | 2026-11-20 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net/sched: clamp skb->queue_mapping before indexing the tx queue This issue was caught by Sashiko (nipa). A producer-side path cap is already merged (ea4d4b5dddb5); this patch adds the matching consumer-side caps. The issue: The tx queue is picked and capped in netdev_core_pick_tx() before the __dev_xmit_skb() qdisc enqueue path. A tc BPF program running inside an egress qdisc (not clsact) can then change __sk_buff->queue_mapping; that store is never re-checked. bpf_convert_ctx_access() bounds it only by NO_QUEUE_MAPPING, not by the device's queue count. Two consumers read the stale value: - On dequeue, qdisc_restart() calls netdev_get_tx_queue(), which indexes dev->_tx[]. netdev_get_tx_queue() guards it with just a DEBUG_NET_WARN_ON_ONCE, so sch_direct_xmit() takes the out-of-bounds txq->_xmit_lock and writes txq->xmit_lock_owner past the end of the allocation on non-lltx devices such as ifb. Drivers that index their rings from skb_get_queue_mapping() (ex: ifb) go out of range the same way. - On enqueue, taprio_enqueue() indexes q->qdiscs[] with the same value; the array is sized dev->num_tx_queues. A duplicating netem on a child qdisc clones the skb and re-enqueues the clone at the taprio root (qdisc_root_bh()) through a direct rootq->enqueue() call, so the value reaches taprio_enqueue() before any dequeue cap runs. The Fix: Cap the mapping at the consumers and write the capped value back, so the qdisc's _tx[] lookup, the taprio q->qdiscs[] lookup and any later driver read stay in range. On the dequeue side the cap folds into the dequeue path instead of a separate walk over the returned list: dequeue_skb() caps the head, and each bulk helper caps the element it appends. For a qdisc that is not TCQ_F_ONETXQUEUE, netdev_cap_txqueue() logs a ratelimited notice and selects queue 0. A TCQ_F_ONETXQUEUE qdisc is bound to a single tx queue: dequeue_skb() uses q->dev_queue for the frozen check, the BQL limit and the trace point, while qdisc_restart() transmits on the skb's queue. Capping an out-of-range mapping to queue 0 would therefore send a per-queue child's skb through a different queue than the one it was dequeued for. On mq, mqprio, taprio and htb offload children, a stopped queue 0 could then park the list in q->gso_skb, and the later wake would schedule queue 0's own child instead of this qdisc. Pin a TCQ_F_ONETXQUEUE mapping to the qdisc's own queue to keep the documented invariant. The pin covers every mapping, not only an out-of-range one: an in-range mapping that a filter sets on one of those per-queue children is rewritten to the child's own queue, and this path does not call netdev_cap_txqueue(), so it logs no notice. On a single-queue device qdisc_create() sets TCQ_F_ONETXQUEUE, so the one-queue trigger described below also takes this branch and is corrected without a notice. That also keeps a bulk list on one queue by construction: every element of a TCQ_F_ONETXQUEUE qdisc, including a follower changed by a filter, is pinned to q->dev_queue before it is appended. The fast bulk helper therefore needs no head comparison and no skb_bad_txq requeue; the slow helper, used only by non-ONETXQUEUE qdiscs, still compares and requeues a mismatched follower, where a wake on any queue reschedules q. On the enqueue side taprio_enqueue() caps the mapping against real_num_tx_queues and writes it back before selecting q->qdiscs[queue], so a duplicating child cannot steer the clone out of the array. Conditions to recreate the bug: The dequeue path: load a SCHED_CLS or SCHED_ACT program that stores __sk_buff->queue_mapping (a tc BPF action is enough), attach it to a transmit qdisc (for example a matchall filter on a prio root), and send a packet. With a 1-queue device a store of 1 indexes one past dev->_tx[]. Under KASAN with panic_on_warn=1 the unfixed kernel faults with "BUG: KASAN: slab-out- ---truncated--- | ||||
| CVE-2026-99635 | 1 Linux | 1 Linux Kernel | 2026-11-20 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: vhost/vsock: size receive SKBs from declared payload vhost_vsock_alloc_skb() sizes the skb from iov_length(), the total guest descriptor length. virtio_transport_inc_rx_pkt() instead adds hdr->len to rx_bytes and buf_used, and budgets each queued skb as SKB_TRUESIZE(0). The guest controls the descriptor length and hdr->len independently. A guest can therefore provide a 64 KiB descriptor while declaring a zero payload. The descriptor-sized skb remains queued, rx_bytes and buf_used remain unchanged, and only the fixed queue-entry budget limits retention. This is not a lifetime leak: the skb is freed when dequeued or at socket teardown. Repeating this across connections can nevertheless exhaust host memory. On Linux v7.2, 455 such descriptors retained 30,255,680 bytes for a 262,144-byte receive buffer; a full-payload control retained 265,984 bytes. Vhost previously read hdr->len and allocated pkt->buf from that value. The conversion from virtio_vsock_pkt to sk_buff instead allocated receive skbs from the descriptor length, introducing the allocation-accounting mismatch. Copy the header into a stack object and validate hdr->len before allocating the skb. Size the allocation as sizeof(hdr) + payload_len so descriptor capacity no longer determines queued memory. Check payload_len against len - sizeof(hdr) to avoid addition overflow on 32-bit hosts. | ||||
| CVE-2026-99632 | 1 Linux | 1 Linux Kernel | 2026-11-20 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: use the queue's process info for the WPTR BO eviction fence amdgpu_amdkfd_map_gtt_bo_to_gart() removes the eviction fence of bo->vm_bo->vm->process_info from the WPTR BO of a new queue. bo->vm_bo is the VM which opened the BO last, not necessarily the KFD process' VM, and a render node VM has no process info. On navi31, an unprivileged process which exports its WPTR BO with AMDKFD_IOC_EXPORT_DMABUF and imports it on a second render node fd oopses in AMDKFD_IOC_CREATE_QUEUE: BUG: kernel NULL pointer dereference, address: 0000000000000060 RIP: 0010:amdgpu_amdkfd_map_gtt_bo_to_gart+0x86/0x1a0 [amdgpu] init_user_queue.part.0+0x180/0x250 [amdgpu] pqm_create_queue+0x32d/0x730 [amdgpu] kfd_ioctl_create_queue+0x583/0x9f0 [amdgpu] Pass the process info of the queue instead. With the fix, the queue is created and destroyed normally. (cherry picked from commit 6b4157498a176bd1c6083f6bb5aaf8a257a2027e) | ||||
| CVE-2026-99628 | 1 Linux | 1 Linux Kernel | 2026-11-20 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Avoid closing unowned DDC pins [WHY] dal_ddc_open() cleans up pins it acquires on later failures. If the data-pin open fails, this attempt acquired nothing. If opening the clock pin or configuring fails, dal_ddc_open() closes the pins it opened. An extra dal_ddc_close() is unnecessary and unsafe: GPIO_RESULT_ALREADY_OPENED can mean AUX owns the existing handles, and closing them here would disrupt AUX. [HOW] Remove the extra dal_ddc_close() from the failed-open path. (cherry picked from commit 175ae7772b68757b4932f34ff862923cab7abe21) | ||||
| CVE-2026-99623 | 1 Linux | 1 Linux Kernel | 2026-11-20 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: Clamp the ATIF backlight curve to its 99 points amdgpu_atif_query_backlight_caps() stores the firmware's number_of_points as data_points but copies only the 99 points that luminance_data[] holds. number_of_points is a u8, so a firmware table that claims more makes the custom curve code in amdgpu_dm index past the array, and dm_query_extended_brightness_caps() copy past the end of the data_points[] buffer it fills Clamp the count to ATIF_QBTC_MAX_DATA_POINTS and warn, since a table that claims more is a firmware bug (cherry picked from commit af8a1c2b7d3de4960e10f94e8ba2fc0ccd168072) | ||||