Export limit exceeded: 397900 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (397900 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-98041 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Don't predict JMP32 pointer vs zero comparisons Consider the following program: r1 = map_value; /* low 32 bits are zero at runtime */ r6 = 0xdead000000000000; if w1 != 0 goto l1; l0: r1 += r6; r2 = *(u64 *)(r1 + 0); exit; l1: r6 = 0; goto l0; At the moment is_branch_taken() reports the jump as always taken, because it does not distinguish between BPF_JMP and BPF_JMP32 comparisons when processing 'if w1 != 0 ...'. | ||||
| CVE-2026-98040 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Mark the zero register precise for a register-form NULL check check_cond_jmp_op() accepts "if rA <op> rB" as a NULL check for a nullable pointer rA when rB is a scalar known to be zero, lifts PTR_MAYBE_NULL from rA in the corresponding branch and does not mark rB precise. Consider the following program: r0 = bpf_get_prandom_u32(); r6 = 1; /* the r6 == 0 path is explored first */ if (r0 == 0) goto 1f; r6 = 0; 1: r0 = bpf_map_lookup_elem(map, &0); /* absent, NULL at runtime */ if (r0 == r6) goto 2f; /* taken as a NULL check for r0 */ *(u8 *)(r0 + 0); /* verifier: map value; runtime: zero */ 2: return 0; The r6 == 0 path is explored first and the dereference is accepted. The r6 == 1 path is pruned at the checkpoint recorded for (1), so the comparison is never verified with a non-zero r6. At runtime a failed lookup returns NULL, NULL != 1 takes the non-NULL edge and the program dereferences a pointer that is zero. | ||||
| CVE-2026-98039 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Require MEM_PERCPU for percpu kptr stores map_kptr_match_type() treats perm_flags as the set of register type flags that a kptr field permits. Adding MEM_PERCPU to that set for BPF_KPTR_PERCPU does not require the source register to carry it, however. The subset test consequently accepts both a plain bpf_obj_new() allocation and a referenced kernel pointer into a __percpu_kptr map field. Loads from the field are always marked MEM_PERCPU. Consumers then treat the stored value as the cookie returned by bpf_percpu_obj_new(): per-CPU pointer helpers relocate it, and map teardown selects the per-CPU free path. A plain allocation can therefore provide an arbitrary kernel read/write, while a kernel pointer can be relocated into an invalid address or sent through a missing destructor. Require the source MEM_PERCPU flag to match the destination field kind. This preserves valid bpf_percpu_obj_new() stores and rejects both the program-BTF and kernel-BTF variants. | ||||
| CVE-2026-98038 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Keep refcount_acquire nullable for borrowed RCU kptrs bpf_refcount_acquire() is fallible for a borrowed reference because the object may have reached a zero refcount. The verifier therefore keeps KF_RET_NULL on the return value unless the argument is an owning reference. An RCU-protected load of a local kptr is marked MEM_ALLOC, but it only receives NON_OWN_REF when the pointee contains a graph node. A refcounted object without a graph node consequently looks like an owning reference even though the loaded register has no acquired reference state. If the program drops the last real reference while remaining in the RCU critical section, refcount_inc_not_zero() returns NULL while the verifier treats the result as non-NULL. Only classify the argument as owning when it is backed by a verifier-tracked reference. This retains the non-NULL return for pointers from bpf_obj_new(), bpf_kptr_xchg(), or an earlier successful acquisition, while requiring a NULL check for borrowed RCU kptrs. [ kkd: Rewrote commit log ] | ||||
| CVE-2026-98037 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Reject untrusted allocated-object pointers When the final RCU read-side critical section ends, a local kptr is demoted to PTR_UNTRUSTED but retains MEM_ALLOC. The pointer may be NULL or may refer to an object whose lifetime is no longer protected. type_is_ptr_alloc_obj() nevertheless recognizes any PTR_TO_BTF_ID with MEM_ALLOC as a live allocated object. In particular, a refcount-only local kptr never carries NON_OWN_REF, so it still passes the bpf_refcount_acquire() argument check after RCU protection ends. The kfunc can then dereference NULL or stale memory. Make type_is_ptr_alloc_obj() reject PTR_UNTRUSTED pointers. Since type_is_non_owning_ref() is based on the same predicate, graph kfunc arguments obey the same live-object requirement. Fault-protected reads of the demoted pointer remain valid: writes are already rejected, and read fixups use bpf_may_fault_on_deref() rather than this predicate. [ kkd: Rewrote commit log ] | ||||
| CVE-2026-98036 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Preserve special fields in recycled rhtab elements rhtab_map_update_elem() initializes special fields after obtaining an element from bpf_mem_cache_alloc(). The allocator can return a fresh, zeroed unit, or recycle one from its RCU-pending lists before the registered destructor has run. A BPF program can retain a map-value pointer after deleting its element and initialize and arm a timer through that pointer. If the deleted unit is recycled, check_and_init_map_value() clears the only pointer to the timer. Neither a later deletion nor rhtab_mem_dtor() can then cancel it, and the callback can run with its key and value pointing into freed memory. Do not reinitialize special fields on insertion. Fresh allocator units are already zeroed. For recycled units, the special fields are ownership state that must remain visible to the eventual destructor. copy_map_value() already skips those fields, matching the non-preallocated hash-map path and the lifecycle established by commit 275c30bcee66 ("bpf: Don't reinit map value in prealloc_lru_pop"). [ kkd: Split out the fix and rewrote the commit log ] | ||||
| CVE-2026-98035 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Cancel special fields when recycling rhtab elements rhtab_map_update_existing() and rhtab_delete_elem() call bpf_obj_free_fields() when replacing or deleting a value. These map operations can run from BPF programs in NMI context, where releasing a referenced kptr or another complex field is not generally safe. Array and hash maps avoid that problem by cancelling only the asynchronous fields which can be stopped safely in the caller context. Other ownership state remains attached to the allocation until its memory allocator destructor performs the final cleanup. Use bpf_obj_cancel_fields() for the corresponding rhtab paths as well. This cancels timers, workqueues, and task work while allowing rhtab_mem_dtor() to release referenced kptrs when the allocation is eventually destroyed. [ kkd: Rebased, used direct helper calls, and rewrote the commit log ] | ||||
| CVE-2026-98034 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Mark NULL kptr stores precise check_map_kptr_access() permits a scalar store into an untrusted kptr field only when the register is known to contain zero. Unlike other verifier checks whose outcome depends on a scalar value, it does not mark that register precise. A state checkpoint reached with an imprecise zero can therefore prune a second path that reaches the store with an arbitrary nonzero scalar. The program can write attacker-controlled bits into the kptr field and load them back as a PTR_TO_BTF_ID. Call mark_chain_precision() before accepting a known-zero register. This forces state equivalence to compare its scalar range and makes the verifier visit and reject a path carrying a nonzero value. | ||||
| CVE-2026-98033 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Preserve inner map identity in callback frames Callback frame constructors initialize map-typed argument registers with __mark_reg_known_zero() and then restore map_ptr. This clears map_uid, which is the only field distinguishing inner maps that share an inner_map_meta template. When a timer callback invokes bpf_for_each_map_elem() on a second inner map, both the saved first map and the second map value can reach the nested callback as the same template with map_uid zero. bpf_timer_init() then accepts pairing the timer from the second map with the first map. The runtime records the first map in the timer without taking a reference. Freeing that map does not find the timer stored in the second map, so a later timer callback dereferences the freed map. Copy map_uid from the same caller register as map_ptr when constructing for-each, timer/workqueue, and task-work callback arguments. The existing identity check can then reject mismatched inner maps while allowing a callback value to be paired with its actual map. | ||||
| CVE-2026-98032 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: tracing: Fix subbuf resize races with trace_pipe_raw readers Concurrent subbuffer resizes may crash trace_pipe_raw readers or leak uninitialized memory to userspace due to stale size values. Modify ring_buffer_alloc_read_page() to handle the resizing of an existing buffer_data_read_page if necessary and add a new ring_buffer_read_page_size(). This new function enables ring-buffer buffer_data_read_page users to not call the racy ring_buffer_subbuf_size_get(). This makes the spare_size member of ftrace_buffer_info redundant. Finally, handle buffer_data_read_page/reader_page order discrepancy in ring_buffer_read_page(). On a mismatch simply copy manually the data to the buffer_data_read_page. | ||||
| CVE-2026-98031 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: nexthop: Initialize extack in remove_nh_grp_entry() remove_nh_grp_entry() prints the extack message when a listener fails to replace the reduced nexthop group. However, extack is not initialized and listeners are not required to set a message when returning an error. Neither netdevsim nor mlxsw do so when an allocation fails, resulting in the dereference of an uninitialized stack pointer. Fix by zero-initializing extack, as was done in commit 6347c5314cee ("nexthop: initialize extack in nh_res_bucket_migrate()"). | ||||
| CVE-2026-98030 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net: dsa: bcm_sf2: bound the CFP rule dump by the caller's buffer size bcm_sf2_cfp_rule_get_all() walks the whole cfp.unique bitmap into rule_locs[] without consulting nfc->rule_cnt, which is how many entries the caller had room for. ETHTOOL_GRXCLSRLALL requires no CAP_NET_ADMIN and the ioctl sizes the buffer from the rule_cnt userspace passes in, so once an admin has installed CFP rules any user can ask for fewer slots than there are rules and run off the end of the allocation. A rule_cnt of 0 leaves the buffer pointer NULL and the walk dereferences it. | ||||
| CVE-2026-98029 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: eth: nfp: bound the ntuple rule dump by the caller's buffer size nfp_net_get_fs_loc() dumps every entry of nn->fs.list into rule_locs[] without consulting cmd->rule_cnt, which is how many entries the caller had room for. ETHTOOL_GRXCLSRLALL requires no CAP_NET_ADMIN and the ioctl sizes the buffer from the rule_cnt userspace passes in, so once an admin has installed flow steering rules any user can ask for fewer slots than there are rules and run off the end of the allocation. A rule_cnt of 0 leaves the buffer pointer NULL and the walk dereferences it. Bail out with -EMSGSIZE when the buffer fills up, the way the other ntuple capable drivers do, and report how many locations were filled so a shrinking rule list does not leave the caller reading stale slots. | ||||
| CVE-2026-98028 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: eth: nfp: drop the replaced rule from the list when reprogramming fails nfp_net_fs_add() replaces an existing rule by deleting it from the hardware, decrementing nn->fs.count and programming the new one. If nfp_net_fs_add_hw() fails the old entry stays on nn->fs.list - only the success path reaches list_replace() - so the list is one longer than nn->fs.count, and it advertises a rule whose hardware entry has already been torn down. nn->fs.count is what ETHTOOL_GRXCLSRLCNT reports, so userspace then sizes its buffer one entry short of what the GRXCLSRLALL walk wants to write. That used to overwrite one u32 past the allocation; since the walk is bounded it is a permanent -EMSGSIZE instead, as nothing ever resyncs the counter. | ||||
| CVE-2026-98027 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net: dsa: mv88e6xxx: bound the policy rule dump by the caller's buffer size mv88e6xxx_get_rxnfc() uses rxnfc->rule_cnt as the write index while dumping the policy IDR, clobbering the input value before it has been looked at. That input is the number of entries the caller had room for. ETHTOOL_GRXCLSRLALL requires no CAP_NET_ADMIN and the ioctl sizes the buffer from the rule_cnt userspace passes in, so once an admin has installed policy rules any user can ask for fewer slots than there are rules and run off the end of the allocation. A rule_cnt of 0 leaves the buffer pointer NULL and the walk dereferences it. Count into a local so the caller's limit survives the walk, and stop with -EMSGSIZE once it is reached. | ||||
| CVE-2026-98026 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net: bridge: mcast: properly convert mglist to rcu Sashiko reported a bug [1] that br_multicast_del_port_group unlists the port group not using proper rcu helper that preserves the next pointer and after that immediately frees the port group without waiting for rcu grace period. The only rcu walker of mglist is br_multicast_list_adjacent() and it turns out that function has always been buggy because mglist was never properly converted to RCU. Fix it by converting it to rcu and moving its initialization after eth_addr's. Initializing p->next can use RCU_INIT_POINTER because we have a barrier from the hlist_add_head_rcu call later, besides we're initializing an unpublished structure anyway. [1] https://netdev-ai.bots.linux.dev/sashiko/#/patchset/20260826014200.362304-1-littleddfu%40gmail.com | ||||
| CVE-2026-98025 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net: usb: cx82310_eth: drop URB after 0xffff reboot sentinel to prevent partial_data heap overflow The 0xffff length sentinel detects a router reboot and schedules re-enabling of ethernet mode, but then falls through to the rest of the loop body. The next check is } else if (len > CX82310_MTU) { which is the else of the just-matched if -- it never fires for len == 0xffff. The MTU bound that normally caps the incomplete-packet save path is silently bypassed. With 0xffff > skb->len always true (rx_urb_size is 4096), the incomplete-packet branch saves dev->partial_len = skb->len bytes into dev->partial_data. partial_data is kmalloc(hard_mtu) = kmalloc(CX82310_MTU + 2) = 1516 bytes, but skb->len after the 2-byte header pull can be up to 4094. A device that sends a 4096-byte URB starting with [0xff 0xff] therefore copies 4094 device-provided bytes into a buffer allocated for 1516 bytes, exceeding its requested size by 2578 bytes. The next URB then reads dev->partial_len (4094) back from the same 1516-byte buffer and dev->partial_rem (65535 - 4094 = 61441) from the new URB's ~4KB skb, both well past their allocations, and delivers the spliced result as a 64KB "frame" to the network stack. Bail out of rx_fixup after scheduling the re-enable work; the remainder of a reboot-marker URB is not meaningful packet data. This restores the invariant that partial_len < CX82310_MTU + 2 on the save path, since every other route there has already passed the MTU check. | ||||
| CVE-2026-98024 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: s390/ism: folio_put() after error dmb->cpu_addr was allocated via folio_alloc(). Use folio_put() instead of kfree() in the error exit of ism_alloc_dmb() to avoid slab allocator corruption. While at it, reset dmb->cpu_addr after folio_put to avoid unintentional UAF by future callers. | ||||
| CVE-2026-98023 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: vxlan: reject dynamic fdb entries that reference a nexthop id The commit cited in the Fixes tag allowed VXLAN FDB entries to point to FDB nexthops so that overlay traffic could be load balanced across multiple VTEPs. Such entries can only be configured from user space, cannot be learned and cannot roam. They only make sense with a user space control plane such as E-VPN where data plane learning is disabled. Despite that, the VXLAN driver does not currently prevent such entries from being configured with the "dynamic" flag. The per-nexthop FDB list is only protected by the per-device hash lock, which is not sufficient when two VXLAN devices point to the same FDB nexthop and therefore share the list. Aging runs in softirq context without RTNL, so an entry deleted by one device can race with an addition or deletion from the other, leading to list corruption: list_del corruption. next->prev should be ffff8881069d9548, but was dead000000000122. (next=ffff8881069d9448) WARNING: CPU: 0 PID: 90 at lib/list_debug.c:65 __list_del_entry_valid_or_report+0x1aa/0x210 ... vxlan_fdb_destroy+0x5b8/0xad0 vxlan_cleanup+0x328/0x450 call_timer_fn+0x2a/0x1c0 run_timer_softirq+0x18c/0x210 BUG: KASAN: slab-use-after-free in vxlan_fdb_destroy Fix this by rejecting the bogus configuration of dynamic FDB entries that point to FDB nexthops, both when created and when an existing entry is updated. As such, the per-nexthop FDB list is only ever mutated under the RTNL lock. Add test cases to make sure that this does not regress in the future. | ||||
| CVE-2026-98022 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net: cap tx_queue_len at S16_MAX to prevent oversized ring allocations Several subsystems allocate ring buffers sized by dev->tx_queue_len with no upper bound. An unprivileged user (via unshare -Urn) can set a huge tx_queue_len and exhaust global memory with ring allocations: - pfifo_fast: pfifo_fast_init() and pfifo_fast_change_tx_queue_len() allocate 3 skb_array rings of tx_queue_len entries each. - tun: tun_queue_resize() and the queue-attach path resize ptr_rings to tx_queue_len on the NETDEV_CHANGE_TX_QUEUE_LEN notifier. - tap (macvtap/ipvtap): tap_queue_resize() and tap_init() resize/init ptr_rings to tx_queue_len on the same notifier. netif_change_tx_queue_len() is the single entry point for IFLA_TXQLEN, sysfs, and the SIOCSIFTXQLEN ioctl. Cap new_len at S16_MAX (32767) there so the oversized value is rejected at set time. This takes effect whether the device is up or down, before dev->tx_queue_len is written, before any notifier fires, and before any ring is allocated. The "> S16_MAX" check also subsumes the previous unsigned-long truncation test, and a negative ifr_qlen from the ioctl lands far above the cap after conversion, so both old failure modes are covered by the one comparison. tx_queue_len is ambigious: both a per-ring sizing multiplier and a default queue-length/limit knob for consumers that allocate nothing at set time (pfifo/bfifo/gred/plug/sfb limits, htb direct_qlen, qfq max_classes, teql). 32767 is chosen as the largest value NLA_POLICY_FULL_RANGE can express for the u32 IFLA_TXQLEN policy in patch 2/3 while staying a legitimate queue length on high-BDP paths; the ring-memory trade-off of a shared knob is disclosed below. Conditions to recreate the bug: - CONFIG_NET_SCHED=y, CONFIG_VETH=y, CONFIG_USER_NS=y, CONFIG_NET_NS=y. - Unprivileged user in a fresh user+net namespace (unshare -Urn). - pfifo_fast: create veth pairs, set tx_queue_len to 500000, attach mq+pfifo_fast. ~28 iterations OOMs a 2GB guest. - tun: create 50 tun devices with IFF_MULTI_QUEUE, set tx_queue_len to 500000, open 8 queues each. ~1.6GB of ptr_ring allocations OOMs a 512MB guest. - tap: same as tun with IFF_TAP. ~960MB OOMs a 512MB guest. - On the fixed kernel the oversized tx_queue_len is rejected with -ERANGE at set time (all four paths: RTM_SETLINK, RTM_NEWLINK create, sysfs, ioctl - the latter two via this check, the former two via this check and the 2/3 parse policy respectively). | ||||