Export limit exceeded: 376786 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (376786 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-68307 | 1 Linux | 1 Linux Kernel | 2026-08-11 | 4.8 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7925: fix crash in reset link replay During reset recovery, mt7925_vif_connect_iter() replays firmware state for links tracked in mvif->valid_links. After MLO link changes or MCU timeout recovery, the driver bitmap can temporarily contain a link whose mac80211 bss_conf has already gone away. This can pass a NULL bss_conf to mt76_connac_mcu_uni_add_dev(), matching the crash where x1, the second argument, is NULL: pc : mt76_connac_mcu_uni_add_dev+0x8c/0x1f8 [mt76_connac_lib] lr : mt7925_vif_connect_iter+0x9c/0x168 [mt7925_common] x2 : ffffff80a77f6018 x1 : 0000000000000000 x0 : ffffff8099402080 Call trace: mt76_connac_mcu_uni_add_dev+0x8c/0x1f8 [mt76_connac_lib] mt7925_vif_connect_iter+0x9c/0x168 [mt7925_common] mt7925_mac_reset_work+0x264/0x2f8 [mt7925_common] Skip missing bss_conf entries before replaying the link. Non-MLO AP/STA reset replay is unchanged because the helper still returns &vif->bss_conf for the legacy link. | ||||
| CVE-2026-68366 | 1 Linux | 1 Linux Kernel | 2026-08-11 | 6.1 Medium |
| In the Linux kernel, the following vulnerability has been resolved: usb: gadget: uvc: clamp SEND_RESPONSE length to the response buffer uvc_send_response() builds the UVC control response from a user-supplied struct uvc_request_data: req->length = min_t(unsigned int, uvc->event_length, data->length); ... memcpy(req->buf, data->data, req->length); req->length is clamped to uvc->event_length, which is taken from the host control request wLength (up to UVC_MAX_REQUEST_SIZE, 64), and to data->length, which comes from the UVCIOC_SEND_RESPONSE ioctl and is only checked for being negative. The source buffer data->data is only 60 bytes, so a response with uvc->event_length and data->length both greater than 60 makes memcpy() read past the end of data->data. Clamp req->length to sizeof(data->data) as well. | ||||
| CVE-2026-66797 | 2026-08-11 | 8.5 High | ||
| A flaw was found in the cluster-backup-operator. An attacker with write access to the backup storage location or the ability to create a Velero Backup object can inject malicious Role-Based Access Control (RBAC) resources into a backup. When this tampered backup is restored, the operator processes the malicious content, leading to a privilege escalation from backup-namespace-admin to hub cluster-admin. This allows the attacker to gain administrative control over the entire cluster. | ||||
| CVE-2026-66800 | 2026-08-11 | 7.1 High | ||
| A flaw was found in cluster-backup-operator. A namespace administrator with privileges in the open-cluster-management-backup namespace can exploit a feature in the Restore Custom Resource (CR). By setting the cleanupBeforeRestore field to CleanupAll, an attacker can trigger an unguarded, cluster-wide deletion of all Red Hat Advanced Cluster Management (ACM) and Hive-labelled Secrets and ConfigMaps. This leads to a denial of service across the entire hub cluster by removing critical resources. | ||||
| CVE-2026-66798 | 2026-08-11 | 8.8 High | ||
| A flaw was found in cluster-backup-operator. A namespace administrator in open-cluster-management-backup can create a Restore Custom Resource (CR) with malicious hooks. These hooks allow the execution of arbitrary commands within any matching restored pod, leading to the exfiltration of ServiceAccount tokens. This bypasses normal access controls, granting the attacker unauthorized execution access to pods and their associated Service Accounts. | ||||
| CVE-2026-68331 | 1 Linux | 1 Linux Kernel | 2026-08-10 | 5.9 Medium |
| In the Linux kernel, the following vulnerability has been resolved: dpaa2-eth: put MAC endpoint device on disconnect fsl_mc_get_endpoint() returns the MAC endpoint device with a reference taken through device_find_child(). The Ethernet connect path stores that device in mac->mc_dev and keeps it for the lifetime of the connected MAC object. However, the disconnect path only disconnects and closes the MAC before freeing the dpaa2_mac object. It does not drop the endpoint device reference stored in mac->mc_dev, so every successful connect leaks that device reference when the MAC is later disconnected. Drop the endpoint device reference after closing the MAC and before freeing the dpaa2_mac object. | ||||
| CVE-2026-21077 | 1 Samsung Mobile | 1 Samsung Health | 2026-08-10 | N/A |
| Incorrect authorization in Samsung Health prior to version 7.0.0 allows local attackers to access sensitive information. | ||||
| CVE-2026-68334 | 1 Linux | 1 Linux Kernel | 2026-08-10 | 5.9 Medium |
| In the Linux kernel, the following vulnerability has been resolved: rxrpc: fix io_thread race in rxrpc_wake_up_io_thread() rxrpc_wake_up_io_thread() checks local->io_thread before waking it, but then reloads the pointer for wake_up_process(). local->io_thread is cleared with WRITE_ONCE() when the I/O thread exits, so the second load can see NULL even if the first load did not. Take a READ_ONCE() snapshot and use it for both the NULL check and the wake_up_process() call, as rxrpc_encap_rcv() already does. | ||||
| CVE-2026-68375 | 1 Linux | 1 Linux Kernel | 2026-08-10 | 4.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: bnxt_en: Handle partially initialized auxiliary devices bnxt_aux_devices_init() calls auxiliary_device_init() before all fields used by bnxt_aux_dev_release() are initialized. After auxiliary_device_init() succeeds, later errors must unwind with auxiliary_device_uninit(), which invokes the release callback. The release callback assumes that aux_priv->id, aux_priv->edev, edev->net and edev->ulp_tbl are all populated. If allocation fails after auxiliary_device_init(), the release path can otherwise dereference or clear partially initialized state. Allocate and attach the bnxt_en_dev and ULP table before calling auxiliary_device_init(), so the release callback only sees a fully initialized auxiliary private object. If auxiliary_device_init() itself fails, free those allocations directly because device_initialize() has not run and the release callback will not be invoked. This issue was found by a static analysis checker and confirmed by manual source review. | ||||
| CVE-2026-68378 | 1 Linux | 1 Linux Kernel | 2026-08-10 | 4.1 Medium |
| In the Linux kernel, the following vulnerability has been resolved: dpll: fix NULL pointer dereference in dpll_msg_add_pin_ref_sync() When a dpll_pin is shared across multiple dpll_device instances and those devices are being unregistered (e.g. during driver module removal), a NULL pointer dereference can occur in dpll_msg_add_pin_ref_sync(). This happens under the following conditions: - A pin is registered with two or more dpll devices (dpll_A, dpll_B) - The pin has ref_sync pairs with other pins - During unregistration of dpll_A's pins, a ref_sync partner pin is unregistered first, removing it from dpll_A->pin_refs - But since the partner pin is still registered with dpll_B, its dpll_refs is not empty, so dpll_pin_ref_sync_pair_del() does NOT run and the partner stays in the pin's ref_sync_pins xarray - When the pin itself is then unregistered from dpll_A, the delete notification calls dpll_msg_add_pin_ref_sync() which finds the partner in ref_sync_pins, passes dpll_pin_available() (partner is still registered with dpll_B), but dpll_pin_on_dpll_priv(dpll_A, partner) returns NULL because partner was already removed from dpll_A->pin_refs - The NULL priv pointer is passed to the driver's ref_sync_get callback, which dereferences it BUG: kernel NULL pointer dereference, address: 0000000000000034 Oops: Oops: 0000 [#1] SMP NOPTI RIP: 0010:zl3073x_dpll_input_pin_ref_sync_get+0x73/0x80 [zl3073x] Call Trace: dpll_msg_add_pin_ref_sync+0xb8/0x200 dpll_cmd_pin_get_one+0x3b6/0x4b0 dpll_pin_event_send+0x72/0x140 __dpll_pin_unregister+0x5a/0x2b0 dpll_pin_unregister+0x49/0x70 Fix this by skipping ref_sync pins whose priv pointer cannot be resolved for the current dpll device. | ||||
| CVE-2026-63077 | 1 Jetbrains | 1 Teamcity | 2026-08-10 | 9.8 Critical |
| In JetBrains TeamCity before 2026.1.3, 2025.11.7 unauthenticated remote code execution was possible via the agent polling protocol | ||||
| CVE-2026-68310 | 1 Linux | 1 Linux Kernel | 2026-08-10 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7915: guard HE capability lookups mt7915_mcu_bss_he_tlv() and mt7915_mcu_sta_bfer_tlv() both run after checking HE support, then dereference the HE PHY capability returned by mt76_connac_get_he_phy_cap(). That helper can return NULL when no capability entry matches the vif type. Fetch the capability before appending the TLV and skip the HE-specific setup when no matching capability is available. | ||||
| CVE-2026-68353 | 1 Linux | 1 Linux Kernel | 2026-08-10 | 6.8 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: ath6kl: fix OOB read from firmware num_msg in TX complete handler The firmware-controlled num_msg field (u8, 0-255) drives the loop in ath6kl_wmi_tx_complete_event_rx() without validation against the buffer length. This allows out-of-bounds reads of up to 1020 bytes past the WMI event buffer when the firmware sends an inflated num_msg. Add a check that the buffer is large enough to hold the fixed struct and the num_msg variable-length entries. | ||||
| CVE-2026-16562 | 2 Wordpress, Wp-statistics | 2 Wordpress, Wp Statistics | 2026-08-10 | 6.5 Medium |
| The WP Statistics WordPress plugin before 14.16.10 does not perform a capability check on a set of dashboard analytics AJAX handlers, relying only on a nonce that every authenticated user holds, allowing users with Subscriber-level access and above to disclose the site's visitor analytics data. | ||||
| CVE-2026-18946 | 2026-08-10 | 7.5 High | ||
| The Contact Form to Any API WordPress plugin before 3.0.7 does not use a random filename when copying files uploaded through contact forms into a publicly accessible directory, allowing unauthenticated attackers to enumerate and download files submitted by other users. | ||||
| CVE-2026-21062 | 1 Samsung Mobile | 1 Samsung Mobile Devices | 2026-08-10 | N/A |
| Authorization bypass in SemClipboardService prior to SMR Aug-2026 Release 1 allows local attackers to access clipboard data. | ||||
| CVE-2026-21063 | 1 Samsung Mobile | 1 Samsung Mobile Devices | 2026-08-10 | N/A |
| Improper export of android application components in AppLock prior to SMR Aug-2026 Release 1 allows physical attackers to bypass app lock function. | ||||
| CVE-2026-21076 | 1 Samsung Mobile | 1 Samsung Health | 2026-08-10 | N/A |
| Incorrect authorization in Samsung Health prior to version 7.0.0 allows local attackers to access sensitive information. | ||||
| CVE-2026-21082 | 1 Samsung Mobile | 1 Samsung Health | 2026-08-10 | N/A |
| Relative path traversal in Samsung Health prior to version 7.0.0 allows local attackers to access sensitive information. | ||||
| CVE-2026-68362 | 1 Linux | 1 Linux Kernel | 2026-08-10 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: ath11k: fix NULL pointer dereference in ath11k_hal_srng_access_begin In ATH11K_QMI_EVENT_FW_READY, ATH11K_FLAG_REGISTERED is set unconditionally even when ath11k_core_qmi_firmware_ready() fails. This leaves the driver in an inconsistent state where initialization is considered complete although the firmware ready handling did not finish successfully. During the subsequent SSR, the driver enters the restart path based on this incorrect state and dereferences uninitialized srng members, resulting in a NULL pointer dereference. Call trace: ath11k_hal_srng_access_begin+0xc/0x60 [ath11k] (P) ath11k_ce_cleanup_pipes+0x17c/0x180 [ath11k] ath11k_core_restart+0x40/0x168 [ath11k] Fix this by: - skipping firmware_ready if ATH11K_FLAG_REGISTERED is already set - setting ATH11K_FLAG_REGISTERED only when firmware_ready succeeds - setting ATH11K_FLAG_QMI_FAIL and aborting the FW_READY handling on error Tested-on: WCN6750 hw1.0 AHB WLAN.MSL.2.0.c2-00204-QCAMSLSWPLZ-1 | ||||