Export limit exceeded: 430658 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (430658 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-99375 | 1 Linux | 2 Linux, Linux Kernel | 2026-11-20 | 2.5 Low |
| In the Linux kernel, the following vulnerability has been resolved: NFSv4/flexfiles: fail I/O to the data server once a lock is lost When a client loses a byte-range lock, because its lease expired and it may not recover the lock (nfs.recover_lost_locks=0) or because reclaim failed, it marks the lock state NFS_LOCK_LOST and fails further I/O by that lock owner. Otherwise an application that believes it holds a lock over a range is never told that the lock is gone, and can overwrite data that another client has since written under its own lock on that range. The NFSv4 READ/WRITE and file layout I/O paths apply this in rpc_call_prepare, where nfs4_set_rw_stateid() returns -EIO for a lost lock. The flexfiles data server I/O path does not: the NFSv3 data server path never checked, and the check on the NFSv4 path was removed when the data server stateid began to be taken from the layout. Fail read and write RPCs to the data server in rpc_call_prepare when the lock is lost. The data server path has no use for the stateid that nfs4_set_rw_stateid() selects, and selecting it looks up a delegation or open stateid on every I/O. Instead add nfs4_lock_context_lost(), which only tests NFS_LOCK_LOST, and check it alongside the open state. Its lookup, __nfs4_lookup_lock_state(), is split out of __nfs4_find_lock_state() and takes no reference: a lock state is only unlinked from state->lock_states under state->state_lock, so one found while holding that lock cannot be freed before it is released. Use it in nfs4_copy_lock_stateid() as well, which only reads the lock state under that lock. That drops a reference get and put from stateid selection for all NFSv4 I/O without changing the stateid selected. Terminating the RPC in rpc_call_prepare is not enough on its own. The done callback reads the -EIO as a data server connection error, forgets the device ID, and resets the I/O to pNFS (or, for an NFSv4 data server, possibly to the MDS). After a reset to pNFS a new LAYOUTGET is granted and rpc_call_prepare fails the I/O again, without end. The existing NFS_CONTEXT_BAD check does not loop, since the open state is then invalid and pnfs_update_layout() fails the reset I/O, but it still forgets the device ID. So when an RPC that was never sent fails and the open context is bad, the open state is invalid, or the lock is lost, complete it with -EIO without error handling. An RPC that was sent and failed is handled as before, so a real data server error is still reported to the MDS. | ||||
| CVE-2026-99376 | 1 Linux | 2 Linux, Linux Kernel | 2026-11-20 | 3.3 Low |
| In the Linux kernel, the following vulnerability has been resolved: NFSv4/pnfs: Free the netid when draining a data-server address list nfs4_pnfs_ds_addr_free() releases all three of an address entry's allocations, but the four sites that drain a decoded list before it reaches a data server open-code the loop and free only da_remotestr and the entry, leaking da_netid. Both layout drivers drain that list when nfs4_pnfs_ds_add() returned a data server already in the cache, and again on their error exits. Lift the drain into nfs4_pnfs_ds_addr_list_free() so an address list has one owner. A striping mount reaches the cached case on nearly every GETDEVICEINFO, since many deviceIDs name the same data servers. | ||||
| CVE-2026-99681 | 1 Linux | 2 Linux, Linux Kernel | 2026-11-20 | 4.1 Medium |
| In the Linux kernel, the following vulnerability has been resolved: blk-mq: fix out-of-bounds read in blk_mq_free_rqs A KASAN slab-out-of-bounds read can occur in blk_mq_free_rqs() when there is a mismatch between the number of hardware queues allocated for the IO scheduler (et->nr_hw_queues) and the number of hardware queues in the block tag set (set->nr_hw_queues). This mismatch can happen if blk_mq_update_nr_hw_queues() fails halfway through (e.g., due to memory pressure during blk_mq_prealloc_tag_set_tags()). In this error path, the elevator is restored with a larger number of hardware queues than the block tag set actually has. When the elevator is later freed, blk_mq_free_sched_tags() iterates up to the new et->nr_hw_queues and calls blk_mq_free_rqs(). In blk_mq_free_rqs(), it attempts to access set->tags[hctx_idx] to get the driver tags. Because set->nr_hw_queues was not updated due to the earlier failure, set->tags still has the old (smaller) size, leading to an out-of-bounds read. BUG: KASAN: slab-out-of-bounds in blk_mq_free_rqs+0xde/0x680 Read of size 8 at addr ffff88818d67fc28 by task syz-executor117/5839 Call Trace: blk_mq_free_rqs+0xde/0x680 blk_mq_free_map_and_rqs+0x40/0xf0 blk_mq_free_sched_tags blk_mq_free_sched_res+0xeb/0x280 elevator_change_done+0x1d2/0x5c0 elevator_change+0x34f/0x480 elv_iosched_store+0x504/0x630 queue_attr_store+0x207/0x2b0 To fix this, explicitly check if hctx_idx < set->nr_hw_queues before accessing set->tags[hctx_idx]. If hctx_idx >= set->nr_hw_queues, the hardware queue doesn't exist in the tag set, meaning there are no driver tags to clear mappings from. In this case, safely set drv_tags to NULL. The subsequent call to blk_mq_clear_rq_mapping() already handles a NULL drv_tags pointer and will safely return. | ||||
| CVE-2026-99687 | 1 Linux | 2 Linux, Linux Kernel | 2026-11-20 | 6.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: vhost-scsi: zero misaligned I/O bounce pages The misaligned I/O fallback copies the full bounce scatterlist to the request buffer during completion. If a data-in command transfers less than requested, part of a newly allocated bounce page can remain unwritten. Allocate bounce pages with __GFP_ZERO so all bytes copied during completion have a defined value. This path is already the slow fallback for misaligned I/O, so the added initialization cost is acceptable. Found during an LLM-assisted source audit and validated with a QEMU/KVM vhost-scsi target using misaligned data-in commands. | ||||
| CVE-2026-99716 | 1 Linux | 2 Linux, Linux Kernel | 2026-11-20 | 4.1 Medium |
| In the Linux kernel, the following vulnerability has been resolved: hwmon: (coretemp) Set nr_cores only after core_data allocation succeeds In init_temp_data(), pdata->nr_cores is populated from topology_num_cores_per_package() before allocating pdata->core_data. If that allocation fails, init_temp_data() returns NULL with pdata->core_data still NULL and pdata->nr_cores set to a positive value. coretemp_add_core() logs the error without failing coretemp_cpu_online(), so the CPU still comes online with pdata->hwmon_dev registered. When the CPU is later taken offline (or the module is unloaded), coretemp_cpu_offline() calls get_temp_data(pd, cpu), which loops up to pdata->nr_cores and dereferences the NULL pdata->core_data pointer. Store the core count in a local variable and assign pdata->nr_cores only after pdata->core_data is allocated, preserving the invariant that pdata->nr_cores is zero whenever pdata->core_data is NULL. | ||||
| CVE-2026-99717 | 1 Linux | 2 Linux, Linux Kernel | 2026-11-20 | 4.1 Medium |
| In the Linux kernel, the following vulnerability has been resolved: hwmon: (pmbus/q54sj108a2) Add missing NULL pointer check When CONFIG_DEBUG_FS is enabled and per-client PMBus debugfs directory creation fails during pmbus_do_probe(), q54sj108a2_probe() passes the NULL pointer returned by pmbus_get_debugfs_dir() to debugfs_create_dir() without validation, creating its debugfs directory at the debugfs root instead of under the client directory. If pmbus_init_debugfs() fails to create the client directory, data->debugfs is left as NULL or an ERR_PTR, which pmbus_get_debugfs_dir() converts to NULL. Passing a NULL parent to debugfs_create_dir() places q54sj108a2_dir in the root of the debugfs filesystem and populates it with attribute files whose private data pointers reference psu->debugfs_entries. Because this root-level directory is outside the client debugfs hierarchy, PMBus core cleanup does not remove it on device unbind, leaking the debugfs entries and causing a use-after-free of the devm-allocated struct q54sj108a2_data if the orphaned files are accessed via q54sj108a2_debugfs_read() or q54sj108a2_debugfs_write() after device removal. Fix the problem by adding the missing NULL pointer check. | ||||
| CVE-2026-99722 | 1 Linux | 2 Linux, Linux Kernel | 2026-11-20 | 6.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: vringh: bound top-level re-entry into indirect tables In __vringh_iov(), the F_INDIRECT branch descends into the indirect table and continues before the descriptor accounting runs. A top-level indirect descriptor is therefore never charged to count. If such a descriptor sets NEXT to point back at itself, returning from the indirect table resumes at the same top-level descriptor, which is again not counted, so the walk never makes forward progress. Because count stays flat and indirect_count is reset to 0 on every return to the top-level table, neither bound in the loop check trips. A guest can spin the vringh worker at 100% CPU inside __vringh_iov(), an uninterruptible host DoS. Move the descriptor accounting above the indirect switch so that a top-level indirect descriptor is charged one top-level traversal step before the walk descends into its table, bringing this re-entry under the existing vrh->vring.num bound. Each top-level descriptor is still charged at most one step and indirect_count still bounds a single table, so legitimate chains (including the multiple-indirect case in tools/virtio/vringh_test.c) stay within vring.num, while a cyclic indirect descriptor is now rejected with -ELOOP. | ||||
| CVE-2026-99727 | 1 Linux | 2 Linux, Linux Kernel | 2026-11-20 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: mm/huge_memory: properly handle refcounted PUD mappings on fork copy_huge_pud() copies device-DAX entries without taking a folio reference or updating mapcounts and the child's RSS. For example, MADV_GUARD_INSTALL sets VM_MAYBE_GUARD on a device-DAX VMA, forcing copy_page_range() to traverse the whole VMA on fork. Any remaining huge PUDs are then copied without accounting for the new mappings. Unmapping them in the child decrements accounting that was never added. Use vm_normal_page_pud() to identify refcounted mappings. Take a folio reference and add the child's PUD rmap and RSS accounting before installing the copied entry. Pass src and dst VMAs consistently instead of src and dst MM. Move the TODO. | ||||
| CVE-2026-99745 | 1 Linux | 2 Linux, Linux Kernel | 2026-11-20 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: x86/bugs: Select the BHI mitigation based on the attack vector properly The BHI mitigation selection is inconsistent with the documentation (attack_vector_controls.rst), which lists BHI under both the user->kernel and guest->host attack vectors. bhi_select_mitigation() only enables it when CPU_MITIGATE_GUEST_HOST is set; otherwise it selects BHI_MITIGATION_OFF, even if CPU_MITIGATE_USER_KERNEL is set. As a result, a kernel compiled with KVM disabled gets BHI automatically disabled, since CPU_MITIGATE_GUEST_HOST defaults to off without KVM. This is a bug, given that CPU_MITIGATE_USER_KERNEL still needs it: on affected Intel CPUs these kernels lose BHI_DIS_S or the BHB clearing loop by default. Booting with mitigations=auto,no_guest_host has the same effect. Select BHI_MITIGATION_ON whenever user->kernel is mitigated, and keep BHI_MITIGATION_VMEXIT_ONLY for the guest->host-only case. [ bp: Clarify commit title. ] | ||||
| CVE-2026-99377 | 1 Linux | 2 Linux, Linux Kernel | 2026-11-20 | 5.9 Medium |
| In the Linux kernel, the following vulnerability has been resolved: NFSv4/pnfs: bound the CB_NOTIFY_DEVICEID array count before allocating decode_devicenotify_args() hands the server's notification count straight to kmalloc_objs() as the array length, without checking it against the message that carried it. Bound it the way nfs4xdr.c bounds an attribute length, against xdr_stream_remaining(). | ||||
| CVE-2026-99378 | 1 Linux | 2 Linux, Linux Kernel | 2026-11-20 | 4.1 Medium |
| In the Linux kernel, the following vulnerability has been resolved: pnfs/blocklayout: Complete a device upcall when the pipe is closed Once blkmapd has read a whole upcall, rpc_pipe_read() unlinks the message from every pipe list, so the purges in rpc_pipe_release() and rpc_close_pipes() no longer reach it. bl_upcall_ops supplies no .release_pipe callback, and bl_pipe_destroy_msg() returns without completing the upcall because a downcall is expected to follow. A daemon that exits between the read and the write therefore strands its waiter: bl_resolve_deviceid() sleeps in wait_for_completion() and never returns, and it holds nn->bl_mutex across that wait, so every later device resolution in the net namespace blocks behind it. Add a .release_pipe that completes an upcall blkmapd has consumed and left unanswered. Completing an upcall retires it, so a message the framework has already purged is no longer in flight and is not completed a second time here. | ||||
| CVE-2026-99381 | 1 Linux | 2 Linux, Linux Kernel | 2026-11-20 | 3.1 Low |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: reject short or out-of-range FIND response parameters CIFSFindFirst() and CIFSFindNext() read the SearchHandle, SearchCount, EndofSearch and LastNameOffset of a TRANS2_FIND_FIRST2 or TRANS2_FIND_NEXT2 response at ParameterOffset. validate_t2() bounds the offset at 1024 and ParameterCount below 512, and nothing compares them with the number of bytes SendReceive() copied into the buffer or with the size of the response parameters. smb_init() places the request and the response in the same cifs_request allocation and cifs_buf_get() clears only the start of it, so a short response with a ParameterOffset past its end has the search handle, the entry count, the end-of-search flag and the last-entry offset read out of the request that was just sent, or out of whatever the allocation held before, and a ParameterCount smaller than the parameters has them read past the end of the parameter block. The reads stay inside the allocation, but what they return is not part of the response, and CIFSFindFirst() then hands back a search handle the server never sent. That handle is sent back to the server in the next FIND_NEXT2 or FIND_CLOSE2, so two bytes of the buffer leak at an offset the server picks. SMB1 is not negotiated by default; reaching this code requires an explicit vers=1.0 mount. Reject a response whose parameter area is smaller than the response parameters or extends past the received length, returning smb_EIO2() with a new smb_eio_traces value for each of the two responses, like the other response checks this file gained since v6.19. Backports to trees before v6.19 need smb_EIO2() replaced with -EINVAL and the trace.h hunk dropped. A conforming server is not affected. The parameter block of a transaction response is part of the SMB, so ParameterOffset + ParameterCount cannot exceed the smbCalcSize() bytes that SendReceive() copies, and the response parameters are 10 bytes for FIND_FIRST2 and 8 bytes for FIND_NEXT2, which is what T2_FFIRST_RSP_PARMS and T2_FNEXT_RSP_PARMS hold. This patch depends on "smb: client: reject FIND data areas that run past the received response", whose declarations it extends. | ||||
| CVE-2026-99382 | 1 Linux | 2 Linux, Linux Kernel | 2026-11-20 | 3.1 Low |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: reject FIND data areas that run past the received response CIFSFindFirst() and CIFSFindNext() take the directory entries of a TRANS2_FIND_FIRST2 or TRANS2_FIND_NEXT2 response from DataOffset for DataCount bytes. validate_t2() bounds DataOffset at 1024 and ParameterCount + DataCount by the byte count, and nothing compares DataOffset + DataCount with the number of bytes SendReceive() copied into the buffer. smb_init() places the request and the response in the same cifs_request allocation and cifs_buf_get() clears only the start of it, so a short response whose data area extends past its end has srch_entries_start point at bytes of the request that was just sent, or at whatever the allocation held before, and those bytes are parsed as directory entries. cifs_readdir() and find_cifs_entry() walk the entries with nxt_dir_entry(), which checks every entry but the first of a response against the end of the SMB; cifs_query_path_info() and cifs_backup_query_path_info() read the first entry with no check at all. Those reads stay inside the allocation, but what they return is not part of the response. The last entry, which LastNameOffset locates relative to the data area, is bounded against the received response by an earlier patch of this series, as is every entry that cifs_fill_dirent() parses; the walk itself and the two query functions are not. SMB1 is not negotiated by default; reaching this code requires an explicit vers=1.0 mount. Reject a response whose data area extends past the received length, with the -EINVAL that validate_t2() returns for the other malformed transaction responses. cifs_query_path_info() and cifs_backup_query_path_info() still read a whole entry from a data area that may be smaller than one; that is not changed here. A conforming server is not affected. The data block of a transaction response is part of the SMB, so DataOffset + DataCount cannot exceed the smbCalcSize() bytes that SendReceive() copies; coalesce_t2() appends each secondary response to the data area and adds its length to both DataCount and the byte count, which keeps that relation. | ||||
| CVE-2026-99384 | 1 Linux | 2 Linux, Linux Kernel | 2026-11-20 | 6.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: fix OOB read of the resume name sent in TRANS2_FIND_NEXT2 cifs_fill_dirent() reads the fixed part of a directory entry and the name length it holds, or for SMB_FIND_FILE_UNIX scans the name for its terminating NUL, without knowing where the response ends. cifs_save_resume_key() calls it for the entry at the LastNameOffset the server chose, after every FindNext and after the FindFirst of a search rewind, and records the name it returns as the resume name of the search without bounding it; the next CIFSFindNext() copies up to PATH_MAX - 1 bytes from that name into its request and sends them to the server. cifs_filldir() bounds the name against the end of the response since commit f8cf09a53a0d ("smb: client: bound dirent name against end of SMB response in cifs_filldir"), but only after cifs_fill_dirent() has read the entry, and nxt_dir_entry() checks the entries it walks only against sizeof(FILE_DIRECTORY_INFO), for every level but SMB_FIND_FILE_INFO_STANDARD, and never sees the first entry of a response. Bounding where last_entry starts, as the preceding patch does, does not bound the read. A last entry that starts within the final bytes of the response still has its fixed part read past the end of the received data, and the name length it declares, a __le32 for every level but SMB_FIND_FILE_INFO_STANDARD and SMB_FIND_FILE_UNIX, is recorded without being checked against anything. CIFSFindNext() rejects only a length of PATH_MAX or more, then copies the name, up to 4095 bytes, into its request and sends it, and as the report below shows that copy can run past the end of the cifs_request allocation that holds the response. For SMB_FIND_FILE_UNIX the name is in addition scanned for its terminating NUL over up to PATH_MAX + 1 UTF-16 units, or PATH_MAX bytes, before any check. The FindNext that carries the name is only sent by the SMB1 dialect, which is not negotiated by default; reaching it requires an explicit vers=1.0 mount. With KASAN enabled, a response whose last entry declares a name longer than the bytes that follow it gives: ================================================================== BUG: KASAN: slab-out-of-bounds in CIFSFindNext+0x8ca/0x14c0 Read of size 4080 at addr ffff88807c823f98 by task ls/83 CPU: 0 UID: 0 PID: 83 Comm: ls Not tainted 7.3.0-rc4-00457-gf14572c203d5 #69 PREEMPT(lazy) Call Trace: <TASK> kasan_report+0xdf/0x1a0 kasan_check_range+0x10f/0x1e0 __asan_memcpy+0x23/0x60 CIFSFindNext+0x8ca/0x14c0 cifs_readdir+0xf51/0x29c0 iterate_dir+0x1c0/0x570 __x64_sys_getdents64+0x133/0x270 do_syscall_64+0x109/0x5d0 entry_SYSCALL_64_after_hwframe+0x77/0x7f </TASK> Allocated by task 83 on cpu 1 at 13.497119s: cifs_buf_get+0x36/0x90 smb_init+0x4f/0x110 CIFSFindNext+0xf7/0x14c0 cifs_readdir+0xf51/0x29c0 The buggy address belongs to the object at ffff88807c820000 which belongs to the cache cifs_request of size 16588 The buggy address is located 16280 bytes inside of allocated 16588-byte region [ffff88807c820000, ffff88807c8240cc) ================================================================== The read is the memcpy() that copies the recorded name into the next request, so those bytes go to the server. Pass the end of the response to cifs_fill_dirent() and have it reject an entry whose fixed part does not fit or whose name extends past the end, before either is used, so that both callers are covered; cifs_save_resume_key() computes the end the same way cifs_readdir() does. The name bound compares the bytes left between the name and the end with the name length rather than adding the length to the name pointer, since the length is a 32-bit value taken from the entry and the sum could wrap on 32-bit systems. cifs_fill_dirent() is also used on the SMB2 readdir path; there smb2_parse_query_directory() has already checked every entry against the end of the response, so a vali ---truncated--- | ||||
| CVE-2026-99387 | 1 Linux | 2 Linux, Linux Kernel | 2026-11-20 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: bound POSIX lock data area by response length CIFSSMBPosixLock() receives a TRANS2 response whose server-provided DataOffset and DataCount are not required by validate_t2() to describe an interval inside the response. A server can therefore make the client read a cifs_posix_lock beyond the response buffer and return those kernel bytes through F_GETLK. Use smbCalcSize() to obtain the full response length after any multipart TRANS2 reassembly, then reject data areas that extend past it before dereferencing them. | ||||
| CVE-2026-99388 | 1 Linux | 2 Linux, Linux Kernel | 2026-11-20 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: smb: smbdirect: fix buffer length underflow in RDMA transfers When a remote buffer descriptor is larger than the remaining local buffer, smbdirect_connection_rdma_xmit() clamps its length and sets buf_len to zero. The common accounting code then subtracts the clamped length from buf_len, causing it to underflow. If another descriptor follows, the loop processes it with a wrapped remaining length and includes memory beyond the local buffer in the RDMA transfer. A client can trigger an out-of-bounds kernel write with an SMB WRITE request, or an out-of-bounds kernel read with an SMB READ request, by supplying multiple RDMA buffer descriptors with an oversized descriptor before the last one. Remove the premature assignment to buf_len. Subtracting the clamped length already consumes the remaining buffer, so the next iteration stops and only descriptors within the local buffer are used to build work requests. | ||||
| CVE-2026-99390 | 1 Linux | 2 Linux, Linux Kernel | 2026-11-20 | 4.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: xfs: fix correction of unwritten extents in quota file data fork LOLLM noticed a couple of problems with the code that fixes unwritten mappings in the quota file's data fork: first, we should zero the ondisk contents as part of converting them to "unwritten" just in case we crash shortly after the conversion. Second, and more importantly, it noticed that we fail to resynchronize the iext tree cursor after modifying the iext tree. If the tree shape changes, we could be in a world of hurt. Third, we should force a quotacheck if we reset an ondisk dquot. Fix all issues. | ||||
| CVE-2026-99391 | 1 Linux | 2 Linux, Linux Kernel | 2026-11-20 | 4.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: xfs: don't try to scrub self-referential dirent in metapath checker LOLLM observes that the _ilock_both helper will loop forever trying to double-lock the same inode if mpath->dp == sc->ip. Callers are not supposed to call us with parent == child because that makes no sense. Trigger an assertion, mark the scan incomplete, and return IO error so that this fails noisily. | ||||
| CVE-2026-99392 | 1 Linux | 2 Linux, Linux Kernel | 2026-11-20 | 3.4 Low |
| In the Linux kernel, the following vulnerability has been resolved: xfs: don't subtract excess usage twice when computing agf_btreeblks LOLLM noticed that the free space btree repair code calculates agf_btreeblks from the number of blocks we wrote to rebuild the free space btrees (minus the roots). That's correct. However, it observes that we subtract the "excess" reservation, which is not correct. Fix this accounting problem. | ||||
| CVE-2026-99393 | 1 Linux | 2 Linux, Linux Kernel | 2026-11-20 | 4.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: xfs: don't overrun incore inode when cleaning attr forks LOLLM noticed that xrep_dinode_check_afork doesn't check for a di_forkoff value that is so large that the attr fork would begin after the end of the inode space. This causes afork_{ptr,size} to be nonsense. What we really ought to do here is zap the attr fork. | ||||