Export limit exceeded: 399994 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (399994 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-88382 | 1 Redis | 1 Hiredis | 2026-09-26 | 7.5 High |
| hiredis commit 29ea279 (post-v1.5.0) contains an uncontrolled memory allocation vulnerability in its RESP aggregate parser. | ||||
| CVE-2026-88390 | 1 Espruino | 1 Espruino | 2026-09-26 | 7.7 High |
| An out-of-bounds write vulnerability in jslGetTokenValueAsString() in Espruino 2v29 (commit bffc6d0) allows crafted JavaScript input containing an overlong token to trigger a one-byte write beyond the JsLex.token buffer in RELEASE/NO_ASSERT builds. The out-of-bounds write corrupts the adjacent tokenValue pointer, resulting in memory corruption and potentially causing application crashes or denial of service. | ||||
| CVE-2026-98050 | 1 Linux | 1 Linux Kernel | 2026-09-26 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: mlxsw: spectrum_ptp: Fix napi_gro_receive() call from GC workqueue context Currently mlxsw_sp1_ptp_ht_gc_collect() is run from the PTP garbage-collection workqueue, rather than the NAPI poll context. For any unmatched PTP entries carrying an SKB, it calls mlxsw_sp1_ptp_unmatched_finish() -> mlxsw_sp1_ptp_packet_finish(). For ingress packets, this calls mlxsw_sp_rx_listener_no_mark_func(). The end of that function is the following: skb->protocol = eth_type_trans(skb, skb->dev); napi_gro_receive(mlxsw_skb_cb(skb)->rx_md_info.napi, skb); The napi pointer is one that was placed in the SKB control block when the trapped packet was received in the NAPI context. Later, when the GC reaps the unmatched entry (up to MLXSW_SP1_PTP_HT_GC_TIMEOUT later), the call to napi_gro_receive() mutates the NAPI instance's GRO list, which is unsafe if the poll is running concurrently on another CPU. In mlxsw_sp1_ptp_ht_gc_collect(), local_bh_disable() is called to prevent softirq processing, but this only applies to the local CPU. Additionally, its comment is stale. It states that mlxsw_sp1_ptp_unmatched_finish() invokes netif_receive_skb(). This has not been accurate since the referenced commit; this patch makes that comment accurate again. mlxsw_pci_napi_devs_init() calls netif_threaded_enable() on the NAPI RX net_device without any conditions. The NAPI instance's poll, which may be running concurrent to the GC, is running as an independently-scheduled kthread which may be on a different CPU. The call to local_bh_disable() does not guard against this. If a tx-timestamp timeout produces an unmatched entry (which can be easily reproduced by running ptp4l and waiting for a port to reach the UNCALIBRATED/SLAVE state) while the owning NAPI thread is in the middle of a poll on another CPU, both sides mutate the GRO list concurrently, as shown below: [39.846] port 1 (swp1): MASTER to UNCALIBRATED on RS_SLAVE list_add corruption. next->prev should be prev (ffff8d620faf4138), but was ffff8d624150f700. (next=ffff8d620faf4138). kernel BUG at lib/list_debug.c:29! Oops: invalid opcode: 0000 [#1] SMP PTI CPU: 1 UID: 0 PID: 539 Comm: napi/mlxsw_rx-0 Not tainted 6.18.48 #1-NixOS PREEMPT(lazy) Hardware name: Mellanox Technologies Ltd. MSN2410/VMOD0001, BIOS 4.6.5 09/13/2018 RIP: 0010:__list_add_valid_or_report+0x79/0xb0 RSP: 0018:ffffcdf8c0f27c08 EFLAGS: 00010246 RAX: 0000000000000075 RBX: ffff8d624150fd00 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000001 RDI: ffff8d6315d1e540 RBP: ffff8d620faf4070 R08: 0000000000000000 R09: 00000000ffffdfff R10: ffffffffa5c60fe0 R11: ffffcdf8c0f27ab8 R12: 0000000000000003 R13: 000000000000003d R14: 00000000000001bc R15: 0000000000000001 FS: 0000000000000000(0000) GS:ffff8d636f63f000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000562689a60c24 CR3: 000000015f224004 CR4: 00000000001726f0 Call Trace: <TASK> gro_receive_skb+0xee/0x230 mlxsw_sp1_ptp_got_packet+0x61/0x140 [mlxsw_spectrum] mlxsw_core_skb_receive+0xdf/0x1b0 [mlxsw_core] mlxsw_pci_napi_poll_cq_rx+0x780/0x9d0 [mlxsw_pci] __napi_poll+0x31/0x1e0 napi_threaded_poll_loop+0x16b/0x1c0 napi_threaded_poll+0x71/0xa0 kthread+0xfb/0x260 ret_from_fork+0x22d/0x260 ret_from_fork_asm+0x1a/0x30 </TASK> Kernel panic - not syncing: Fatal exception in interrupt The machinery that leads to this kernel panic has not been changed between 6.18.48 and mainline. This patch adds an ingress-delivery helper for the PTP packet_finish() path that calls netif_receive_skb() instead of napi_gro_receive(). netif_receive_skb(), unlike napi_gro_receive(), can be called from outside of the NAPI instance's poll context, which can occur at the call site for this path. RX stats accounting and the skb->dev assignment are still preserved; the only change is the delivery call itself. This removes GR ---truncated--- | ||||
| CVE-2026-98055 | 1 Linux | 1 Linux Kernel | 2026-09-26 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ASoC: Intel: avs: Clean up the bus when fetching ML caps fails snd_hdac_ext_bus_get_ml_capabilities() may fail and its return code shall be checked and accounted for. Address the issue by updating the error-path for avs_pci_probe(). At the same time, if the function in question succeeds but the next part of avs_pci_probe() fails, the hlink list shall be cleaned up before leaving the scope. | ||||
| CVE-2026-98059 | 1 Linux | 1 Linux Kernel | 2026-09-26 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Mark sched_process_wait argument as nullable do_wait() passes wo->wo_pid to the sched_process_wait tracepoint. kernel_wait4() leaves wo_pid NULL for wait4(-1), and kernel_waitid_prepare() does likewise for waitid(P_ALL). btf_ctx_access() currently types argument 0 as PTR_TO_BTF_ID | PTR_TRUSTED. Without PTR_MAYBE_NULL, the verifier accepts an unchecked dereference. Trusted pointer loads have no fault protection, so a wait for any child can then cause a NULL pointer dereference in JITed BPF code. Add sched_process_wait to raw_tp_null_args[] with argument 0 marked nullable. The verifier rejects an unchecked dereference while preserving access after the program checks the pointer for NULL. | ||||
| CVE-2026-98063 | 1 Linux | 1 Linux Kernel | 2026-09-26 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Fix NULL-ptr-deref in btf_var_show() btf_var_show() calls btf_type_id_resolve() unconditionally, which dereferences btf->resolved_ids. That is NULL for a base BTF - e.g. the vmlinux BTF that bpf_snprintf_btf() renders against - since base BTF is not resolved during parsing. btf_modifier_show() guards this with 'if (btf->resolved_ids)', but btf_var_show() does not. A BPF program that passes the type_id of a BTF_KIND_VAR from the vmlinux BTF to bpf_snprintf_btf() thus NULL-derefs: KASAN: probably user-memory-access in range [0x46638-0x4663f] RIP: 0010:btf_var_show (kernel/bpf/btf.c:2929) Call Trace: <TASK> btf_type_show (kernel/bpf/btf.c:8259) btf_type_snprintf_show (kernel/bpf/btf.c:8329) bpf_snprintf_btf (kernel/trace/bpf_trace.c:1047) bpf_prog_test_run_raw_tp (net/bpf/test_run.c:829) __sys_bpf (kernel/bpf/syscall.c:4804) do_syscall_64 (arch/x86/entry/syscall_64.c:84) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:121) </TASK> Resolve the var's type directly with btf_type_skip_modifiers() when resolved_ids is NULL, mirroring btf_modifier_show(). | ||||
| CVE-2026-98065 | 1 Linux | 1 Linux Kernel | 2026-09-26 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Reject key-less BTF for hash maps map_check_btf() allows a key-less BTF (btf_key_type_id == 0) only for maps that have a ->map_check_btf callback, and leaves the actual decision to that callback. Hash maps used to have no ->map_check_btf, so a key-less BTF was rejected outright. That changed when htab and rhtab gained a ->map_check_btf to register a dtor - htab in commit 1df97a7453ee ("bpf: Register dtor for freeing special fields") and rhtab in commit 6905f8601298 ("bpf: Allow special fields in resizable hashtab"). Neither looks at the key, so a key-less hash map now passes map_check_btf() and gets created. Reading it back through bpffs feeds the key type_id 0 into btf_type_seq_show(); btf_type_by_id() returns the void type, kind_ops[BTF_KIND_UNKN] is NULL, and btf_type_show() dereferences it: RIP: 0010:btf_type_show+0x223/0x2e0 kernel/bpf/btf.c:8232 RSP: 0018:ffffc9000399f868 EFLAGS: 00010206 RAX: dffffc0000000000 RBX: 0000000000000000 RCX: 0000000000000000 RDX: 0000000000000005 RSI: 0000000000000000 RDI: 0000000000000028 RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000000 R10: ffffc9000399f970 R11: 0000000000000001 R12: ffffffff9b96b140 R13: ffffc9000399f8e0 R14: ffff88803d393c00 R15: 0000000000000003 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000200000000000 CR3: 000000003d213000 CR4: 0000000000352ef0 DR0: 0000000039ae8f55 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Call Trace: <TASK> btf_type_seq_show_flags+0xca/0x120 kernel/bpf/btf.c:8250 htab_map_seq_show_elem+0x12e/0x350 kernel/bpf/hashtab.c:1669 map_seq_show+0x13d/0x1e0 kernel/bpf/inode.c:293 traverse.part.0.constprop.0+0x107/0x650 fs/seq_file.c:112 traverse fs/seq_file.c:99 [inline] seq_read_iter+0x93f/0x1270 fs/seq_file.c:196 seq_read+0x344/0x4d0 fs/seq_file.c:163 vfs_read+0x1e4/0xb40 fs/read_write.c:572 ksys_pread64 fs/read_write.c:764 [inline] __do_sys_pread64 fs/read_write.c:772 [inline] __se_sys_pread64 fs/read_write.c:769 [inline] __x64_sys_pread64+0x1eb/0x250 fs/read_write.c:769 do_syscall_x64 arch/x86/entry/syscall_64.c:61 [inline] do_syscall_64+0x123/0x790 arch/x86/entry/syscall_64.c:84 entry_SYSCALL_64_after_hwframe+0x77/0x7f Reject a key-less BTF in htab_map_check_btf() and rhtab_map_check_btf(), restoring the previous behavior. | ||||
| CVE-2026-90481 | 1 Portswigger | 1 Burp Suite | 2026-09-26 | N/A |
| In PortSwigger Burp Suite DAST (formerly Burp Suite Enterprise Edition) before 2026.8, an authentication bypass can occur via an alternate path or channel. | ||||
| CVE-2026-97966 | 1 Linux | 1 Linux Kernel | 2026-09-26 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: octeontx2-pf: reset HTB scheduler topology before freeing queues HTB offload programs NIX_AF_TLxX_TOPOLOGY on QoS-allocated scheduler queues via otx2_qos_txschq_set_parent_topology(), but teardown freed those queues without clearing TOPOLOGY. The AF only restores PARENT and SCHEDULE on free, so PRIO_ANCHOR/RR_PRIO settings can survive in the shared scheduler pool and affect later allocations. Add otx2_qos_reset_schq_topology() and otx2_qos_free_hw_schq() to zero TL4 through TL2 TOPOLOGY before each schq is returned to the AF during hierarchy teardown and cfg rollback. Skip the aggregation level (TL1): it is a per-tx-link queue shared by the PF, default Tx hierarchy and VFs, and is not freed back to the AF by nix_txschq_free_one(). | ||||
| CVE-2026-97996 | 1 Linux | 1 Linux Kernel | 2026-09-26 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: virtio: fix use-after-free in unregister_virtio_device() device_unregister() is device_del() plus put_device(). When the caller holds no extra reference, that drops the last one and runs the release callback, which for several transports frees the memory the embedded struct virtio_device sits in. unregister_virtio_device() then calls virtio_debug_device_exit(), which reads dev->debugfs_dir out of the freed object. Affected transports are the ones whose release callback frees and whose remove path takes no reference: virtio_mmio, virtio_vdpa, virtio_uml, mlxbf-tmfifo and virtio_ccw. virtio_pci is unaffected because virtio_pci_remove() brackets the call with get_device() and put_device(). Remove the debugfs entries before the device can go away. They are only accessed through the protected debugfs interface, so debugfs_remove_recursive() waits for in-progress file operations before returning. Tearing them down while the device is still alive is therefore safe. Reproduced on User-Mode Linux with CONFIG_KASAN and CONFIG_VIRTIO_DEBUG by unbinding a virtio-uml device: BUG: KASAN: slab-use-after-free in virtio_debug_device_exit+0x36/0x4d Read of size 8 at addr 00000000616e0b10 by task init/1 __asan_report_load8_noabort virtio_debug_device_exit+0x36/0x4d unregister_virtio_device+0x48/0x75 virtio_uml_remove platform_remove device_release_driver_internal unbind_store Freed by task 1: kfree virtio_uml_release_dev device_release kobject_put put_device device_unregister With this applied, the report is gone and unbind is clean. | ||||
| CVE-2026-98005 | 1 Linux | 1 Linux Kernel | 2026-09-26 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: erofs: delimit inode_share cache key components Previously, inode_share keys were encoded as follows: fingerprint || domain_id It would be better to have a separator between the fingerprint and domain ID so that the fingerprint won't be parsed as part of a domain ID. Change the key encoding as follows: domain_id || '\0' || fingerprint Since domain_id is a NUL-terminated string, this makes the in-memory key indices unambiguous. | ||||
| CVE-2026-98009 | 1 Linux | 1 Linux Kernel | 2026-09-26 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net/sched: ets: clamp quantum in parse and fallback paths ets_qdisc_change() falls back to psched_mtu() with no floor for bands without an explicit quantum. With a crafted size table qdisc_pkt_len reaches ~2 GiB, so a zero psched_mtu on a headerless device makes the deficit-refill loop spin under the qdisc lock. Move the floor into ets_quantum_parse() so explicitly configured quanta are also clamped to [256, 1<<20], not just the fallback path. Conditions to recreate the bug: CONFIG_NET_SCH_ETS=y. Requires CAP_NET_ADMIN (namespace-local via unshare -Urn suffices). tc qdisc add dev dummy0 root ets bands 3 strict 2 quanta 1 1 | ||||
| CVE-2026-93806 | 1 Linux | 1 Linux Kernel | 2026-09-26 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: cfg80211: validate assoc response length before status and IE access cfg80211_rx_assoc_resp() initialises the status and response-IE fields of cfg80211_connect_resp_params from the management frame before proving that the frame is long enough for those offsets. S1G and regular association responses also have different IE offsets, but the S1G path only patched resp_ie after the unsafe initialiser had already run. Defer resp_ie, resp_ie_len, and status to after the link-iteration loop. Use a bool to remember whether the frame is S1G, then validate the appropriate minimum length and set all three fields in a single if/else block. Funnel short-frame and SME-reject cleanup through a shared free_bss label for the abandon paths. | ||||
| CVE-2026-93810 | 1 Linux | 1 Linux Kernel | 2026-09-26 | 7 High |
| In the Linux kernel, the following vulnerability has been resolved: cachefiles: Fix double fput Fix a double fput() in error handling in cachefiles_create_tmpfile(). | ||||
| CVE-2026-98064 | 1 Linux | 1 Linux Kernel | 2026-09-26 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Fix NULL-ptr-deref when showing a void BTF type btf_modifier_show() resolves the modifier and then calls btf_type_ops(t)->show() unconditionally. For the void type (type_id 0, BTF_KIND_UNKN) kind_ops[] has no entry, so ->show is NULL. A "const void" (a modifier resolving to void) cannot be a map key or value - map_check_btf() rejects it because void has no size - so the map dump path does not reach it. But bpf_snprintf_btf() takes a type_id straight from the BPF program, and passing such a "const void" from the vmlinux BTF NULL-derefs: KASAN: null-ptr-deref in range [0x0000000000000028-0x000000000000002f] RIP: 0010:btf_modifier_show (kernel/bpf/btf.c:2914) Call Trace: <TASK> btf_type_show (kernel/bpf/btf.c:8251) btf_type_snprintf_show (kernel/bpf/btf.c:8321) bpf_snprintf_btf (kernel/trace/bpf_trace.c:1047) bpf_prog_test_run_raw_tp (net/bpf/test_run.c:829) __sys_bpf (kernel/bpf/syscall.c:4804) do_syscall_64 (arch/x86/entry/syscall_64.c:94) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:121) </TASK> Fall back to btf_df_show() when the resolved type has no show op; it emits the "<unsupported kind:N>" placeholder already used for kinds like FWD and FUNC. bpf_snprintf_btf() then returns the length as usual. | ||||
| CVE-2026-98075 | 1 Linux | 1 Linux Kernel | 2026-09-26 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: bpf: reject BPF_PSEUDO_FUNC reference to the main program fixups.c:jit_subprogs() rewrites BPF_PSEUDO_FUNC loads to contain real function addresses. This function is invoked from bpf_jit_subprogs() only when env->subprog_cnt > 1. Meaning that for any program like below: int main(void *ctx) { void *ptr = main; ... bpf_timer_set_callback(..., ptr); ... } The 'ptr' won't be ever converted to contain an address. In combination with e.g. bpf_timer_set_callback() this would lead to a function call at a bogus address. Instead of complicating the implementation, just assume that no useful program needs main to be a sync or async callback and reject BPF_PSEUDO_FUNC loads for the main subprogram. | ||||
| CVE-2026-93206 | 1 Linux | 1 Linux Kernel | 2026-09-26 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: PCI/proc: Use file_ns_capable() when checking config space read access proc_bus_pci_read() decides how much of the config space is readable based on capable(CAP_SYS_ADMIN), which checks the credentials of the task calling read(), not the credentials of the process that opened the file. The sysfs equivalent, pci_read_config(), has checked the credentials of the opening process since commit de139a339395 ("pci: check caps from sysfs file open to read device dependent config space"), so a privileged process can open the config space file and pass the file descriptor to an unprivileged process (for example, a process running a KVM guest with an assigned device), which can then read the entire config space. The check was subsequently routed through the LSM framework in commit 47970b1b2aa6 ("pci: use security_capable() when checking capablities during config space read") and converted to the dedicated helper in commit ab0fa82b2df9 ("pci-sysfs: use proper file capability helper function"). Thus, the two interfaces check the same capability against different credentials. Checking the credentials of the task calling read() makes the outcome depend on who reads rather than who opened, so the restriction is bypassed whenever a more privileged process reads through the descriptor. Checking the credentials recorded in file->f_cred settles the decision at open() time and ties it to the file, where it cannot change with the caller. Use file_ns_capable() to check CAP_SYS_ADMIN against the credentials in effect when the file was opened, bringing the procfs interface in line with the sysfs behaviour. As a result, a file descriptor opened by a privileged process and passed to an unprivileged one now allows the entire config space to be read through procfs, matching sysfs. | ||||
| CVE-2026-93225 | 1 Linux | 1 Linux Kernel | 2026-09-26 | 7.4 High |
| In the Linux kernel, the following vulnerability has been resolved: phy: fsl-imx8mq-usb: fix typec switch leak on probe error path If probe fails after imx95_usb_phy_get_tca() succeeds, the typec switch leaks because the only cleanup path was in .remove(), which never runs on probe failure. Use devm_add_action_or_reset() so the switch is cleaned up on both probe failure and driver removal. The imx95_usb_phy_put_tca() is no longer needed, it will be removed in .remove() too. | ||||
| CVE-2026-97450 | 1 Linux | 1 Linux Kernel | 2026-09-26 | 8.4 High |
| In the Linux kernel, the following vulnerability has been resolved: ACPICA: validate handler object type in two places ACPICA: validate handler object type in acpi_ev_has_default_handler() and acpi_ev_find_region_handler(). | ||||
| CVE-2026-97580 | 1 Linux | 1 Linux Kernel | 2026-09-26 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: media: rkvdec: bound HEVC tile loops and PPS id to the array capacity compute_tiles_uniform() and compute_tiles_non_uniform() loop over num_tile_columns_minus1 + 1 / num_tile_rows_minus1 + 1 entries, and assemble_hw_pps() writes one COLUMN_WIDTH / ROW_HEIGHT register per tile and indexes priv_tbl->param_set[] by pic_parameter_set_id, all taken from the untrusted PPS. Use the bounded v4l2_hevc_pps_num_tile_columns() / v4l2_hevc_pps_num_tile_rows() helpers for the tile loops, and bail out of assemble_hw_pps() before indexing priv_tbl->param_set[] with an out-of-range pic_parameter_set_id, so the writes stay within the hardware tables. | ||||