Export limit exceeded: 349262 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 349262 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (349262 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-38360 | 2026-05-08 | 9.8 Critical | ||
| Directory Traversal vulnerability in fohrloop dash-uploader v.0.1.0 through v.0.7.0a2 allows a remote attacker to execute arbitrary code via the dash_uploader/httprequesthandler.py, aseHttpRequestHandler.get_temp_root(), BaseHttpRequestHandler._post() components | ||||
| CVE-2026-42190 | 2026-05-08 | 5.3 Medium | ||
| RedwoodSDK is a server-first React framework. From version 1.0.0-beta.50 to before version 1.2.3, server actions in rwsdk apply HTTP method enforcement but no origin validation. A request originating from a different origin that the browser treats as same-site can invoke a server action with the victim's session cookie attached. This issue has been patched in version 1.2.3. | ||||
| CVE-2026-43302 | 1 Linux | 1 Linux Kernel | 2026-05-08 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/v3d: Set DMA segment size to avoid debug warnings When using V3D rendering with CONFIG_DMA_API_DEBUG enabled, the kernel occasionally reports a segment size mismatch. This is because 'max_seg_size' is not set. The kernel defaults to 64K. setting 'max_seg_size' to the maximum will prevent 'debug_dma_map_sg()' from complaining about the over-mapping of the V3D segment length. DMA-API: v3d 1002000000.v3d: mapping sg segment longer than device claims to support [len=8290304] [max=65536] WARNING: CPU: 0 PID: 493 at kernel/dma/debug.c:1179 debug_dma_map_sg+0x330/0x388 CPU: 0 UID: 0 PID: 493 Comm: Xorg Not tainted 6.12.53-yocto-standard #1 Hardware name: Raspberry Pi 5 Model B Rev 1.0 (DT) pstate: 60400009 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : debug_dma_map_sg+0x330/0x388 lr : debug_dma_map_sg+0x330/0x388 sp : ffff8000829a3ac0 x29: ffff8000829a3ac0 x28: 0000000000000001 x27: ffff8000813fe000 x26: ffffc1ffc0000000 x25: ffff00010fdeb760 x24: 0000000000000000 x23: ffff8000816a9bf0 x22: 0000000000000001 x21: 0000000000000002 x20: 0000000000000002 x19: ffff00010185e810 x18: ffffffffffffffff x17: 69766564206e6168 x16: 74207265676e6f6c x15: 20746e656d676573 x14: 20677320676e6970 x13: 5d34303334393134 x12: 0000000000000000 x11: 00000000000000c0 x10: 00000000000009c0 x9 : ffff8000800e0b7c x8 : ffff00010a315ca0 x7 : ffff8000816a5110 x6 : 0000000000000001 x5 : 000000000000002b x4 : 0000000000000002 x3 : 0000000000000008 x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff00010a315280 Call trace: debug_dma_map_sg+0x330/0x388 __dma_map_sg_attrs+0xc0/0x278 dma_map_sgtable+0x30/0x58 drm_gem_shmem_get_pages_sgt+0xb4/0x140 v3d_bo_create_finish+0x28/0x130 [v3d] v3d_create_bo_ioctl+0x54/0x180 [v3d] drm_ioctl_kernel+0xc8/0x140 drm_ioctl+0x2d4/0x4d8 | ||||
| CVE-2026-43318 | 1 Linux | 1 Linux Kernel | 2026-05-08 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: fix sync handling in amdgpu_dma_buf_move_notify Invalidating a dmabuf will impact other users of the shared BO. In the scenario where process A moves the BO, it needs to inform process B about the move and process B will need to update its page table. The commit fixes a synchronisation bug caused by the use of the ticket: it made amdgpu_vm_handle_moved behave as if updating the page table immediately was correct but in this case it's not. An example is the following scenario, with 2 GPUs and glxgears running on GPU0 and Xorg running on GPU1, on a system where P2P PCI isn't supported: glxgears: export linear buffer from GPU0 and import using GPU1 submit frame rendering to GPU0 submit tiled->linear blit Xorg: copy of linear buffer The sequence of jobs would be: drm_sched_job_run # GPU0, frame rendering drm_sched_job_queue # GPU0, blit drm_sched_job_done # GPU0, frame rendering drm_sched_job_run # GPU0, blit move linear buffer for GPU1 access # amdgpu_dma_buf_move_notify -> update pt # GPU0 It this point the blit job on GPU0 is still running and would likely produce a page fault. | ||||
| CVE-2026-43323 | 1 Linux | 1 Linux Kernel | 2026-05-08 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: sched/fair: Fix zero_vruntime tracking fix John reported that stress-ng-yield could make his machine unhappy and managed to bisect it to commit b3d99f43c72b ("sched/fair: Fix zero_vruntime tracking"). The combination of yield and that commit was specific enough to hypothesize the following scenario: Suppose we have 2 runnable tasks, both doing yield. Then one will be eligible and one will not be, because the average position must be in between these two entities. Therefore, the runnable task will be eligible, and be promoted a full slice (all the tasks do is yield after all). This causes it to jump over the other task and now the other task is eligible and current is no longer. So we schedule. Since we are runnable, there is no {de,en}queue. All we have is the __{en,de}queue_entity() from {put_prev,set_next}_task(). But per the fingered commit, those two no longer move zero_vruntime. All that moves zero_vruntime are tick and full {de,en}queue. This means, that if the two tasks playing leapfrog can reach the critical speed to reach the overflow point inside one tick's worth of time, we're up a creek. Additionally, when multiple cgroups are involved, there is no guarantee the tick will in fact hit every cgroup in a timely manner. Statistically speaking it will, but that same statistics does not rule out the possibility of one cgroup not getting a tick for a significant amount of time -- however unlikely. Therefore, just like with the yield() case, force an update at the end of every slice. This ensures the update is never more than a single slice behind and the whole thing is within 2 lag bounds as per the comment on entity_key(). | ||||
| CVE-2026-43325 | 1 Linux | 1 Linux Kernel | 2026-05-08 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: wifi: iwlwifi: mvm: don't send a 6E related command when not supported MCC_ALLOWED_AP_TYPE_CMD is related to 6E support. Do not send it if the device doesn't support 6E. Apparently, the firmware is mistakenly advertising support for this command even on AX201 which does not support 6E and then the firmware crashes. | ||||
| CVE-2026-43329 | 1 Linux | 1 Linux Kernel | 2026-05-08 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: flowtable: strictly check for maximum number of actions The maximum number of flowtable hardware offload actions in IPv6 is: * ethernet mangling (4 payload actions, 2 for each ethernet address) * SNAT (4 payload actions) * DNAT (4 payload actions) * Double VLAN (4 vlan actions, 2 for popping vlan, and 2 for pushing) for QinQ. * Redirect (1 action) Which makes 17, while the maximum is 16. But act_ct supports for tunnels actions too. Note that payload action operates at 32-bit word level, so mangling an IPv6 address takes 4 payload actions. Update flow_action_entry_next() calls to check for the maximum number of supported actions. While at it, rise the maximum number of actions per flow from 16 to 24 so this works fine with IPv6 setups. | ||||
| CVE-2026-43334 | 1 Linux | 1 Linux Kernel | 2026-05-08 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: SMP: force responder MITM requirements before building the pairing response smp_cmd_pairing_req() currently builds the pairing response from the initiator auth_req before enforcing the local BT_SECURITY_HIGH requirement. If the initiator omits SMP_AUTH_MITM, the response can also omit it even though the local side still requires MITM. tk_request() then sees an auth value without SMP_AUTH_MITM and may select JUST_CFM, making method selection inconsistent with the pairing policy the responder already enforces. When the local side requires HIGH security, first verify that MITM can be achieved from the IO capabilities and then force SMP_AUTH_MITM in the response in both rsp.auth_req and auth. This keeps the responder auth bits and later method selection aligned. | ||||
| CVE-2026-43342 | 1 Linux | 1 Linux Kernel | 2026-05-08 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: usb: gadget: f_rndis: Protect RNDIS options with mutex The class/subclass/protocol options are suspectible to race conditions as they can be accessed concurrently through configfs. Use existing mutex to protect these options. This issue was identified during code inspection. | ||||
| CVE-2026-43353 | 1 Linux | 1 Linux Kernel | 2026-05-08 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: i3c: mipi-i3c-hci: Fix race in DMA ring dequeue The HCI DMA dequeue path (hci_dma_dequeue_xfer()) may be invoked for multiple transfers that timeout around the same time. However, the function is not serialized and can race with itself. When a timeout occurs, hci_dma_dequeue_xfer() stops the ring, processes incomplete transfers, and then restarts the ring. If another timeout triggers a parallel call into the same function, the two instances may interfere with each other - stopping or restarting the ring at unexpected times. Add a mutex so that hci_dma_dequeue_xfer() is serialized with respect to itself. | ||||
| CVE-2026-43366 | 1 Linux | 1 Linux Kernel | 2026-05-08 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: io_uring/kbuf: check if target buffer list is still legacy on recycle There's a gap between when the buffer was grabbed and when it potentially gets recycled, where if the list is empty, someone could've upgraded it to a ring provided type. This can happen if the request is forced via io-wq. The legacy recycling is missing checking if the buffer_list still exists, and if it's of the correct type. Add those checks. | ||||
| CVE-2026-42180 | 2026-05-08 | 6.3 Medium | ||
| Lemmy is a link aggregator and forum for the fediverse. Prior to version 0.19.18, Lemmy allows an authenticated low-privileged user to create a link post through POST /api/v3/post. When a post is created in a public community, the backend asynchronously sends a Webmention to the attacker-controlled link target. The submitted URL is checked for syntax and scheme, but the audited code path does not reject loopback, private, or link-local destinations before the Webmention request is issued. This lets a normal user trigger server-side HTTP requests toward internal services. This issue has been patched in version 0.19.18. | ||||
| CVE-2026-42181 | 2026-05-08 | 6.5 Medium | ||
| Lemmy is a link aggregator and forum for the fediverse. Prior to version 0.19.18, Lemmy fetches metadata for user-supplied post URLs and, under the default StoreLinkPreviews image mode, downloads the preview image through local pict-rs. While the top-level page URL is checked against internal IP ranges, the extracted og:image URL is not subject to the same restriction. As a result, an authenticated low-privileged user can submit an attacker-controlled public page whose Open Graph image points to an internal image endpoint. Lemmy will fetch that internal image server-side and store a local thumbnail that can then be served back to users. This issue has been patched in version 0.19.18. | ||||
| CVE-2026-42185 | 2026-05-08 | 5.5 Medium | ||
| People is an application to handle users and teams, and distribute permissions across La Suite. Prior to version 1.25.0, a user holding the Administrator role on a mail domain could send a crafted invitation request to promote any existing user (including users with no current domain access) to the Owner role. The exploit requires a single authenticated HTTP request and grants full domain ownership immediately, without any acceptance step from the target. This issue has been patched in version 1.25.0. | ||||
| CVE-2026-42208 | 2 Berriai, Litellm | 2 Litellm, Litellm | 2026-05-08 | 9.8 Critical |
| LiteLLM is a proxy server (AI Gateway) to call LLM APIs in OpenAI (or native) format. From version 1.81.16 to before version 1.83.7, a database query used during proxy API key checks mixed the caller-supplied key value into the query text instead of passing it as a separate parameter. An unauthenticated attacker could send a specially crafted Authorization header to any LLM API route (for example POST /chat/completions) and reach this query through the proxy's error-handling path. An attacker could read data from the proxy's database and may be able to modify it, leading to unauthorised access to the proxy and the credentials it manages. This issue has been patched in version 1.83.7. | ||||
| CVE-2026-42176 | 2026-05-08 | 6.7 Medium | ||
| Scoold is a Q&A and a knowledge sharing platform for teams. Prior to version 1.67.0, Scoold allows the admins configuration value to be modified through /api/config/set/admins with a forged Bearer token that is accepted as an admin API token. Once that setting is changed, the target email address is written to the application configuration file. The change does not become active immediately in the current process, because the ADMINS set is loaded once at startup. After a Scoold restart, though, the selected user is recognized as an administrator and gains access to the admin panel. This issue gives an attacker a reliable persistence path: write their own email into scoold.admins, wait for a restart or trigger one operationally, and the account comes back as admin. This issue has been patched in version 1.67.0. | ||||
| CVE-2026-43398 | 1 Linux | 1 Linux Kernel | 2026-05-08 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: add upper bound check on user inputs in wait ioctl Huge input values in amdgpu_userq_wait_ioctl can lead to a OOM and could be exploited. So check these input value against AMDGPU_USERQ_MAX_HANDLES which is big enough value for genuine use cases and could potentially avoid OOM. v2: squash in Srini's fix (cherry picked from commit fcec012c664247531aed3e662f4280ff804d1476) | ||||
| CVE-2026-43436 | 1 Linux | 1 Linux Kernel | 2026-05-08 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: usb-audio: Check endpoint numbers at parsing Scarlett2 mixer interfaces The Scarlett2 mixer quirk in USB-audio driver may hit a NULL dereference when a malformed USB descriptor is passed, since it assumes the presence of an endpoint in the parsed interface in scarlett2_find_fc_interface(), as reported by fuzzer. For avoiding the NULL dereference, just add the sanity check of bNumEndpoints and skip the invalid interface. | ||||
| CVE-2026-43464 | 1 Linux | 1 Linux Kernel | 2026-05-08 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: RX, Fix XDP multi-buf frag counting for legacy RQ XDP multi-buf programs can modify the layout of the XDP buffer when the program calls bpf_xdp_pull_data() or bpf_xdp_adjust_tail(). The referenced commit in the fixes tag corrected the assumption in the mlx5 driver that the XDP buffer layout doesn't change during a program execution. However, this fix introduced another issue: the dropped fragments still need to be counted on the driver side to avoid page fragment reference counting issues. Such issue can be observed with the test_xdp_native_adjst_tail_shrnk_data selftest when using a payload of 3600 and shrinking by 256 bytes (an upcoming selftest patch): the last fragment gets released by the XDP code but doesn't get tracked by the driver. This results in a negative pp_ref_count during page release and the following splat: WARNING: include/net/page_pool/helpers.h:297 at mlx5e_page_release_fragmented.isra.0+0x4a/0x50 [mlx5_core], CPU#12: ip/3137 Modules linked in: [...] CPU: 12 UID: 0 PID: 3137 Comm: ip Not tainted 6.19.0-rc3+ #12 NONE Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014 RIP: 0010:mlx5e_page_release_fragmented.isra.0+0x4a/0x50 [mlx5_core] [...] Call Trace: <TASK> mlx5e_dealloc_rx_wqe+0xcb/0x1a0 [mlx5_core] mlx5e_free_rx_descs+0x7f/0x110 [mlx5_core] mlx5e_close_rq+0x50/0x60 [mlx5_core] mlx5e_close_queues+0x36/0x2c0 [mlx5_core] mlx5e_close_channel+0x1c/0x50 [mlx5_core] mlx5e_close_channels+0x45/0x80 [mlx5_core] mlx5e_safe_switch_params+0x1a5/0x230 [mlx5_core] mlx5e_change_mtu+0xf3/0x2f0 [mlx5_core] netif_set_mtu_ext+0xf1/0x230 do_setlink.isra.0+0x219/0x1180 rtnl_newlink+0x79f/0xb60 rtnetlink_rcv_msg+0x213/0x3a0 netlink_rcv_skb+0x48/0xf0 netlink_unicast+0x24a/0x350 netlink_sendmsg+0x1ee/0x410 __sock_sendmsg+0x38/0x60 ____sys_sendmsg+0x232/0x280 ___sys_sendmsg+0x78/0xb0 __sys_sendmsg+0x5f/0xb0 [...] do_syscall_64+0x57/0xc50 This patch fixes the issue by doing page frag counting on all the original XDP buffer fragments for all relevant XDP actions (XDP_TX , XDP_REDIRECT and XDP_PASS). This is basically reverting to the original counting before the commit in the fixes tag. As frag_page is still pointing to the original tail, the nr_frags parameter to xdp_update_skb_frags_info() needs to be calculated in a different way to reflect the new nr_frags. | ||||
| CVE-2026-43401 | 1 Linux | 1 Linux Kernel | 2026-05-08 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: cpufreq: intel_pstate: Fix NULL pointer dereference in update_cpu_qos_request() The update_cpu_qos_request() function attempts to initialize the 'freq' variable by dereferencing 'cpudata' before verifying if the 'policy' is valid. This issue occurs on systems booted with the "nosmt" parameter, where all_cpu_data[cpu] is NULL for the SMT sibling threads. As a result, any call to update_qos_requests() will result in a NULL pointer dereference as the code will attempt to access pstate.turbo_freq using the NULL cpudata pointer. Also, pstate.turbo_freq may be updated by intel_pstate_get_hwp_cap() after initializing the 'freq' variable, so it is better to defer the 'freq' until intel_pstate_get_hwp_cap() has been called. Fix this by deferring the 'freq' assignment until after the policy and driver_data have been validated. [ rjw: Added one paragraph to the changelog ] | ||||