Export limit exceeded: 395373 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (395373 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-90242 | 1 Linux | 1 Linux Kernel | 2026-09-17 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: iommu/vt-d: Fix iopf_refcount leak on RID domain replacement intel_iommu_attach_device() enables IOPF for the new domain but never disables it for the old one. device_block_translation(), called at the start of the function, tears down translation but does not touch any IOPF state; blocking_domain_attach_dev() has to call iopf_for_domain_remove() explicitly before invoking it for exactly this reason. identity_domain_attach_dev() has the same problem. Its comment claims that no PRI handling is needed because the device has been put in the blocking state, but the blocking state and the IOPF reference count are independent of each other. As a result, replacing a domain that has an iopf_handler with another domain at RID level leaks a reference in info->iopf_refcount. The count never drops back to zero, so iopf_queue_remove_device() is never called and iommu_disable_pci_pri() triggers its WARN_ON(info->iopf_refcount) when the device is released. The PASID paths already handle this correctly by way of iopf_for_domain_replace(); convert the two RID paths to do the same. Using the replace helper rather than a bare remove keeps the enable before the disable, so the reference count does not transiently reach zero and evict the device from the IOPF queue. | ||||
| CVE-2026-90238 | 1 Linux | 1 Linux Kernel | 2026-09-17 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: media: amd: isp4: fix self-deadlock in isp4sd_pwron_and_init() error path isp4sd_pwron_and_init() holds ops_mutex via guard(mutex) and, on any init failure, jumps to err_deinit and calls isp4sd_pwroff_and_deinit(). That helper takes the same ops_mutex, re-acquiring a non-recursive mutex already held by the current thread, so any init failure deadlocks. Unwind the error path in stages instead, releasing only what each failure point acquired. This also avoids the issues that an unconditional teardown would hit at the earlier failures, such as a runtime-PM underflow from pm_runtime_resume_and_get() and MMIO access while the device is unpowered. | ||||
| CVE-2026-90233 | 1 Linux | 1 Linux Kernel | 2026-09-17 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: nvme-pci: release descriptor pools on probe failure The per-NUMA-node descriptor DMA pools are created lazily from nvme_init_hctx_common() once the admin tag set is allocated, but they are only destroyed in nvme_remove() via nvme_release_descriptor_pools(). Any probe failure after the admin tag set has been allocated unwinds through the out_disable label and nvme_pci_free_ctrl(), neither of which releases the pools, leaking the dma_pool objects. Release the descriptor pools in the out_disable error path. It must not be added to nvme_pci_free_ctrl(), as that would double-free against nvme_remove() on the normal teardown path. | ||||
| CVE-2026-90232 | 1 Linux | 1 Linux Kernel | 2026-09-17 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: amt: Don't support cross-netns setup. When a lower device is unregistered, amt_device_event() tries to unregister its upper AMT device, but it has two problems. 1. amt_lookup_upper_dev() looks up an upper device in the lower device's netns only 2. amt_device_event() unregisters a single upper device only If AMT device is created on a lower device in another netns, removing the lower device triggers the splat below and gets stuck until all upper devices are removed. [0] The cross-netns setup seems unintentional considering 1. and the following points: * amt_link_setup() sets dev->netns_immutable to true * skb_scrub_packet() is not called in the fast path * iproute2 binary fails to find cross-netns lower device via link-netns: # ip -n ns1 link add amt0 link-netns ns2 type amt dev veth1 Cannot find device "veth1" Instead of supporting it properly and preparing for per-netns netdev unreg, let's forbid cross-netns setup. Note that the problem 2. needs a separate fix. [0]: WARNING: net/core/dev.c:12518 at unregister_netdevice_many_notify+0x1cce/0x2250, CPU#48: ip/2031 Modules linked in: CPU: 48 UID: 0 PID: 2031 Comm: ip Not tainted 7.2.0-rc5+ #27 PREEMPT(full) Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.17.0-debian-1.17.0-1 04/01/2014 RIP: 0010:unregister_netdevice_many_notify (net/core/dev.c:12518) Code: 89 ef e8 d5 52 ae fe e9 d0 f4 ff ff 48 8d 3d f9 3b 9c 02 48 c7 c6 c0 0b 63 84 ba ab 1f 00 00 67 48 0f b9 3a e9 65 ff ff ff 90 <0f> 0b 90 eb 81 48 8d 3d f6 3b 9c 02 48 c7 c6 c0 0b 63 84 ba e2 1f RSP: 0018:ffffc90004abf160 EFLAGS: 00010212 RAX: ffff888104d38260 RBX: ffff88800b0911b8 RCX: dffffc0000000000 RDX: 0000000000000000 RSI: 0000000000000008 RDI: ffffffff85b9f880 RBP: ffffc90004abf2d0 R08: ffffffff85b9f887 R09: 1ffffffff0b73f10 R10: dffffc0000000000 R11: fffffbfff0b73f11 R12: ffff88800b091d08 R13: ffff88800b091178 R14: dffffc0000000000 R15: ffff88800b091000 FS: 00007f555b86c600(0000) GS:ffff8881942a0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000562107d489c0 CR3: 0000000109a40002 CR4: 0000000000372ef0 Call Trace: <TASK> rtnl_dellink (net/core/rtnetlink.c:3632 net/core/rtnetlink.c:3674) rtnetlink_rcv_msg (net/core/rtnetlink.c:7112) netlink_rcv_skb (net/netlink/af_netlink.c:2556) netlink_unicast (net/netlink/af_netlink.c:1319) netlink_sendmsg (net/netlink/af_netlink.c:1900) ____sys_sendmsg (net/socket.c:775) __sys_sendmsg (net/socket.c:2738) do_syscall_64 (arch/x86/entry/syscall_64.c:63) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:121) ... unregister_netdevice: waiting for veth0 to become free. Usage count = 7 ref_tracker: netdev@ffff88800d7496d8 has 3/3 users at __netdev_adjacent_dev_insert (./include/linux/netdevice.h:4525 ./include/linux/netdevice.h:4554 net/core/dev.c:8791) __netdev_upper_dev_link (net/core/dev.c:8879 net/core/dev.c:8963) netdev_upper_dev_link (net/core/dev.c:9009) amt_newlink (drivers/net/amt.c:3321) | ||||
| CVE-2026-90226 | 1 Linux | 1 Linux Kernel | 2026-09-17 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: nfc: llcp: avoid userspace overflow on invalid optlen nfc_llcp_getsockopt() casts optval to (u32 __user *) for put_user(), so the kernel always stores 4 bytes regardless of the caller-supplied optlen. The existing min_t(u32, len, sizeof(u32)) only clamps the length reported back to userspace; it does not constrain the store. A call with optlen < 4 therefore writes past the user buffer, violating the getsockopt(2) contract for all five supported optnames. Reject any call with optlen < sizeof(u32) up front. 'len' is int, so a plain size comparison would promote a negative optlen to size_t and slip past the check; an explicit 'len < 0' test is added first to catch negative values before the size compare. | ||||
| CVE-2026-90224 | 1 Linux | 1 Linux Kernel | 2026-09-17 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: nfc: nci: fix double completion race in nci_data_exchange_complete nci_close_device() and nci_rx_work can both call nci_data_exchange_complete() concurrently. After commit 4527025d440ce8 ("nfc: nci: fix circular locking dependency in nci_close_device") moved flush_workqueue(ndev->rx_wq) after mutex_unlock(&ndev->req_lock), rx_work is no longer serialized with the explicit completion call in the close path. Both callers read the non-NULL callback pointer and invoke rawsock_data_exchange_complete(), which calls sock_put() -- but only one sock_hold() was taken, so the second sock_put() underflows the refcount and frees the socket while it is still in use. Replace the bare clear_bit(NCI_DATA_EXCHANGE) with test_and_clear_bit() so that only the first caller proceeds to invoke the callback. | ||||
| CVE-2026-90222 | 1 Linux | 1 Linux Kernel | 2026-09-17 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: nfc: pn533: hold a reference to the request skb during send_frame __pn533_send_async() publishes the command and then calls dev->phy_ops->send_frame(). Once dev->cmd is set, an incoming frame can be matched to this command: the I2C threaded IRQ runs pn533_recv_frame(), which queues cmd_complete_work, and pn533_send_async_complete() frees cmd->req with consume_skb(). On the I2C transport, pn533_i2c_send_frame() still dereferences the same skb after i2c_master_send() returns, so a completion that races the send can free the skb while the transport is still using it. The request skb is owned by the command object and may be freed by command completion at any time after dev->cmd is published, so the transport send path must not assume it stays alive. Hold a temporary reference to the request skb across the send_frame() call so the transport always sees a live skb even if completion races the send. Add a pn533_send_cmd_frame() helper and use it from all three send paths. | ||||
| CVE-2026-90221 | 1 Linux | 1 Linux Kernel | 2026-09-17 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: nfc: nci: fix use of uninitialized memory in CORE_INIT_RSP parsing nci_core_init_rsp_packet_v1() and nci_core_init_rsp_packet_v2() parse the CORE_INIT_RSP packet without validating that the skb contains enough data. A malformed response (e.g. injected via virtual_ncidev) can declare a large num_supported_rf_interfaces while providing insufficient data, causing reads of uninitialized slab memory. This is later used in nci_init_complete_req(), triggering a KMSAN uninit-value warning. Add skb length checks before accessing packet fields: - Validate the skb has at least 1 byte for the status field. - Validate the skb can hold the fixed-size header before parsing. - In v2, bounds-check each variable-length rf_interface entry and its extension parameters within the parsing loop. - In v1, verify the skb is large enough for both the variable-length rf_interfaces array and the trailing rsp_2 structure. | ||||
| CVE-2026-90220 | 1 Linux | 1 Linux Kernel | 2026-09-17 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: seq: Don't leak the extension cell pointer in the bounce payload The bounce_error_event() embeds the failed event in the bounce payload by pointing data.ext.ptr at it. When that event is a queued variable-length event, its own data.ext.ptr holds the address of its first extension cell, put there by snd_seq_event_dup(). The payload goes out verbatim through snd_seq_expand_var_event(), so the address reaches userspace. That is the same address commit 705dd6dcbc0e ("ALSA: seq: Clear variable event pointer on read") removed from the event header. The read path still clears it there, just above the call that expands the payload. Embed a sanitised copy instead, treated exactly as snd_seq_read() treats the header. A stack copy is enough because delivery is synchronous and snd_seq_event_dup() copies before returning. An unprivileged client reaches this by setting SNDRV_SEQ_FILTER_BOUNCE, queueing a variable-length event to a port that does not exist and reading the bounce back. Eight bytes on 64-bit, from its own pool. | ||||
| CVE-2026-90218 | 1 Linux | 1 Linux Kernel | 2026-09-17 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/cma: Fix WARNING in res_to_rt syzbot reported a WARN_ON(!res->dev) in res_to_rt() triggered via addr_handler() during asynchronous address resolution: " WARNING: drivers/infiniband/core/restrack.c:138 at res_to_rt+0x1c4/0x230 CPU#1: kworker/u8:4/59 Modules linked in: CPU: 1 UID: 0 PID: 59 Comm: kworker/u8:4 Not tainted syzkaller #0 PREEMPT(full) Hardware name: Google Compute Engine, BIOS Google 07/24/2026 Workqueue: ib_addr process_one_req RIP: 0010:res_to_rt+0x1c4/0x230 drivers/infiniband/core/restrack.c:138 RSP: 0018:ffffc9000201f850 EFLAGS: 00010293 RAX: ffffffff88d00ce5 RBX: ffff88807f0fd4f8 RCX: ffff88801e6e0000 RDX: 0000000000000000 RSI: ffffffff8fd996f0 RDI: 0000000000000003 RBP: 0000000000000000 R08: ffff88801e6e0000 R09: 000000000000000a R10: 0000000000000009 R11: 0000000000000000 R12: dffffc0000000000 R13: 1ffff1100fe1fa9f R14: 0000000000000000 R15: 0000000000000003 FS: 0000000000000000(0000) GS:ffff888125012000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00001d559c3d2000 CR3: 0000000077c4c000 CR4: 00000000003526f0 Call Trace: <TASK> rdma_restrack_add+0x5a/0x8a0 drivers/infiniband/core/restrack.c:236 addr_handler+0x41a/0x5a0 drivers/infiniband/core/cma.c:3534 process_one_req+0x2eb/0x540 drivers/infiniband/core/addr.c:624 process_one_work kernel/workqueue.c:3375 [inline] process_scheduled_works+0xc4e/0x1630 kernel/workqueue.c:3458 worker_thread+0xa47/0xfb0 kernel/workqueue.c:3539 kthread+0x388/0x470 kernel/kthread.c:436 ret_from_fork+0x514/0xb70 arch/x86/kernel/process.c:158 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:245 </TASK> " In addr_handler(), cma_acquire_dev_by_src_ip() is called to populate id_priv->cma_dev and bind the associated ib_device to id_priv->id.device. If cma_acquire_dev_by_src_ip() returns an error (non-zero status), the ID remains unassociated with any RDMA device. Previously, rdma_restrack_add(&id_priv->res) was invoked unconditionally even when cma_acquire_dev_by_src_ip() failed, passing a resource with a NULL dev pointer and triggering the WARN_ON assertion in res_to_rt(). Fix this by only adding the resource to restrack when acquiring the device succeeds. | ||||
| CVE-2026-90216 | 1 Linux | 1 Linux Kernel | 2026-09-17 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ubi: Fix rollback for explicit UBI device numbers ubi_init_attach() rolls back module initialization failures by scanning ubi_devices[0..i-1], where i is the mtd= parameter index. That assumes the parameter index matches the UBI device number. That assumption is not true when mtd= specifies an explicit ubi_num. A successfully attached device can be stored at a higher ubi_devices[] slot, and a later failure can miss it during rollback. Scan the full ubi_devices[] array and detach by the actual array index, matching the way UBI devices are stored. | ||||
| CVE-2026-90215 | 1 Linux | 1 Linux Kernel | 2026-09-17 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: mtd: ubi: Release device reference on busy detach ubi_detach_mtd_dev() obtains a device reference through ubi_get_device() before checking whether the UBI device is busy. The busy return path drops ubi->ref_count but leaves the device reference held, so the device object cannot be released after a later detach. Drop the device reference before returning -EBUSY. | ||||
| CVE-2026-90214 | 1 Linux | 1 Linux Kernel | 2026-09-17 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ASoC: xilinx: formatter_pcm: fix stream_data leak on open error In xlnx_formatter_pcm_open(), stream_data is allocated and adata->play_stream or adata->capture_stream is assigned early. If a later step, such as snd_pcm_hw_constraint_step() or snd_pcm_hw_constraint_integer(), fails, the function returns the error immediately. ALSA does not call the close callback when open fails, so stream_data is leaked and the stream pointer is left dangling, pointing to a substream that ALSA frees. A later interrupt would then call snd_pcm_period_elapsed() on the freed substream. Free stream_data and clear the stream pointer on the error paths. | ||||
| CVE-2026-9314 | 2026-09-17 | N/A | ||
| This CVE ID has been rejected or withdrawn by its CVE Numbering Authority. | ||||
| CVE-2026-90211 | 1 Linux | 1 Linux Kernel | 2026-09-17 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: bpf, s390: Clear fetch destination on faulting arena atomic Same missing register clear as on riscv64. A RMW atomic on an arena pointer is converted to BPF_PROBE_ATOMIC and gets an exception table entry, but bpf_jit_probe_atomic_pre() only fills in the arena base and the probe offset, leaving probe->reg at the -1 that bpf_jit_probe_init() set, which bpf_jit_probe_post() writes into the entry and ex_handler_bpf() then reads back as "there is nothing to clear". That is right for a plain BPF_{ADD,AND,OR,XOR}, which only writes memory, but an RMW carrying BPF_FETCH also reads the old value into a register: src_reg for BPF_{ADD,AND,OR,XOR} | BPF_FETCH and BPF_XCHG, and r0 for BPF_CMPXCHG. So on a fault over an unmapped arena page the program resumes at the landing pad with whatever that register held before the atomic instead of the 0 that every other BPF_PROBE_* access delivers. Fill probe->reg in from bpf_atomic_load_reg(). Unlike x86-64 and arm64, s390x does not report arena violations from its exception handler, so there is no access direction to correct here, only the missing register clear. | ||||
| CVE-2026-90209 | 1 Linux | 1 Linux Kernel | 2026-09-17 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: s390/debug: Fix deadlock during unregister Unregistering an s390dbf debug area while one of the associated debugfs files is being written to can cause a deadlock: $ echo >.../vmur/level $ rmmod vmur =================================================== debugfs write debugfs_file_get() debug_unregister() mutex_lock(debug_mutex) debugfs_remove() wait for debugfs_file_put() debug_file_ops.write() debug_input() mutex_lock(debug_mutex) ==> DEADLOCK Fix this by splitting debug_unregister() into an s390dbf and debugfs part, and running only the s390dbf part with debug_mutex locked. | ||||
| CVE-2026-90207 | 1 Linux | 1 Linux Kernel | 2026-09-17 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: seq: midi: Serialize input teardown with event_input snd_midi_input_event() must not be running while a rawmidi substream is closing, since this can lead to the trigger state becoming out-of-step through this sequence in snd_rawmidi_input_trigger(): snd_rawmidi_input_trigger(up=0) snd_midi_input_event() -> snd_rawmidi_kernel_read() -> snd_rawmidi_input_trigger(up=1) -> cancel_work_sync() which ends with the underlying device being active unexpectedly. When this is called from close_substream(), further input can re-trigger the input event leaving it running after rawmidi_release_priv() has set rfile->rmidi to NULL which leads to: Unable to handle kernel NULL pointer dereference at virtual address 00000000000000b0 Call trace: snd_midi_input_event+0x3c/0x134 [snd_seq_midi] (P) snd_rawmidi_input_event_work+0x1c/0x2c process_one_work+0x150/0x3a4 worker_thread+0x190/0x318 Apply a similar approach to commit ef7607ab1c8ad ("ALSA: seq: midi: Serialize output teardown with event_input") which fixed the same issue in the output direction, but updated to use RCU following Takashi Iwai's proposed follow-on patch [1]. With this change in place, midisynth_unsubscribe() clears the input file so snd_midi_input_event() will not re-trigger the stream and will be quiesced by the cancel_work_sync() in snd_rawmidi_input_trigger(). [1] https://lore.kernel.org/linux-sound/20260813144224.753399-1-tiwai@suse.de/ | ||||
| CVE-2026-90203 | 1 Linux | 1 Linux Kernel | 2026-09-17 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: Squashfs: check block offset is not negative If a negative offset is read off disk (for example the offset into the decompressed fragment block), this will cause squashfs_copy_data() to perform an out of bounds access. Fix by checking if offset is negative, and returning 0. This matches existing behaviour where an offset beyond the block returns 0 bytes copied. To trigger this out of bounds access requires a crafted Squashfs filesystem and CAP_SYS_ADMIN to mount it. Unprivileged users will not be able to mount such a filesystem, but once mounted, an unprivileged user can trigger the out of bounds access by reading the crafted file with the negative offset. | ||||
| CVE-2026-90202 | 1 Linux | 1 Linux Kernel | 2026-09-17 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: scsi: mpt3sas: Avoid freeing unallocated PCIe SGL buffers _base_release_memory_pools() unconditionally frees every ioc->pcie_sg_lookup[] entry, including ones the setup loop never allocated after a partial failure, causing a "bad dma" warning on debug kernels or a NULL pointer dereference otherwise. | ||||
| CVE-2026-90201 | 1 Linux | 1 Linux Kernel | 2026-09-17 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net: page_pool: fix UAF in __page_pool_release_netmem_dma on xa_cmpxchg race This bug was discovered while testing the hns3 driver under channel reconfiguration (`ethtool -L` / `ethtool -G`) with iperf3 traffic on arm64. The race is intermittently triggered when page_pool_destroy() runs page_pool_scrub() concurrently with page return via page_pool_put_netmem() on a different CPU. A WARN in page_pool_clear_pp_info() surfaced the dangling DMA index bits left by the cmpxchg loser, which led to the investigation. page_pool_scrub() iterates pool->dma_mapped via xa_for_each() with no page ref held. __page_pool_release_netmem_dma() currently reads and writes netmem fields (dma_addr, DMA index bits in pp_magic) after xa_cmpxchg() returns. The unref path calls put_page() unconditionally regardless of the cmpxchg outcome; when it loses the cmpxchg, it still frees the page before the scrub winner finishes these netmem accesses, so scrub touches a freed page -- a Use-After-Free. Fix this by splitting the DMA release into two functions: 1. __page_pool_unmap_netmem_dma() caches dma_addr before xa_cmpxchg(), does the cmpxchg to remove the DMA mapping, and calls dma_unmap on the cached address. It never touches netmem fields after the cmpxchg, making it safe for the scrub path which holds no page ref. 2. __page_pool_release_netmem_dma() wraps the above and additionally clears dma_addr and DMA index bits in netmem fields. This is safe only when the caller holds a page ref, so it is used by the return path (page_pool_return_netmem). The scrub path calls __page_pool_unmap_netmem_dma() directly; the return path calls __page_pool_release_netmem_dma(). | ||||