Export limit exceeded: 409320 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (409320 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-18165 | 1 Fastify | 2 Fastify\/oauth2, Oauth2 | 2026-09-04 | 4.2 Medium |
| @fastify/oauth2 is an OAuth 2.0 plugin for Fastify. In versions from 7.2.0 up to but not including 8.3.0, the plugin validates the OAuth state, and with PKCE the code verifier, by comparing the callback query parameter against an unprefixed, predictable cookie, with no server-side binding to the browser that began the flow. Any party able to write a cookie for the application's host, such as a sibling subdomain under the same registrable domain, can plant matching state and verifier cookies and complete an attacker-owned OAuth flow inside a victim's browser, silently signing the victim in to the attacker's account (login CSRF). It does not expose the victim's own account, credentials, or tokens. The issue is fixed in @fastify/oauth2 8.3.0, which adds an opt-in hostPrefixedCookies option. Users should upgrade to 8.3.0 and enable it, or bind state to a server-side session. | ||||
| CVE-2026-64307 | 1 Linux | 1 Linux Kernel | 2026-09-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: crypto: ccp - Do not initialize SNP for ioctl(SNP_CONFIG) Sashiko notes: > if SEV initialization fails and KVM is actively running normal VMs, could a > userspace process trigger this code path via /dev/sev ioctls (e.g., > SEV_PDH_GEN) and zero out MSR_VM_HSAVE_PA globally? Would the next VMRUN > execution for an active VM trigger a general protection fault and crash the > host? Refuse to re-try initialization if SNP is not already initialized for SNP_CONFIG. This is technically an ABI break: before if SNP initialization failed it could be transparently retriggered by this ioctl, and if no VMs were running, everything worked fine. Hopefully this is enough of a corner case that nobody will notice, but someone does, there are a few options: * do something like symbol_get() for kvm and refuse to initialize if KVM is loaded * check each cpu's HSAVE_PA for non-zero data before re-initializing * once initialization has failed, continue to refuse to initialize until the ccp module is unloaded | ||||
| CVE-2026-64308 | 1 Linux | 1 Linux Kernel | 2026-09-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: crypto: ccp - Do not initialize SNP for ioctl(SNP_VLEK_LOAD) Sashiko notes: > if SEV initialization fails and KVM is actively running normal VMs, could a > userspace process trigger this code path via /dev/sev ioctls (e.g., > SEV_PDH_GEN) and zero out MSR_VM_HSAVE_PA globally? Would the next VMRUN > execution for an active VM trigger a general protection fault and crash the > host? The SEV firmware docs for SNP_VLEK_LOAD note: > On SNP_SHUTDOWN, the VLEK is deleted. That is, the initialization/shutdown wrapper here is pointless, because the firmware immediately throws away the key anyway. Instead, refuse to do anything if SNP has not been previously initialized. This is an ABI break: before, this was a no-op and almost certainly a mistake by userspace, and now it returns -ENODEV. ABI compatibility could be maintained here by simply returning 0 in the check instead. | ||||
| CVE-2026-64310 | 1 Linux | 1 Linux Kernel | 2026-09-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: crypto: ccp - Do not initialize SNP for SEV ioctls Sashiko notes: > if SEV initialization fails and KVM is actively running normal VMs, could a > userspace process trigger this code path via /dev/sev ioctls (e.g., > SEV_PDH_GEN) and zero out MSR_VM_HSAVE_PA globally? Would the next VMRUN > execution for an active VM trigger a general protection fault and crash the > host? sev_move_to_init_state() is called for ioctls requiring only SEV firmware: SEV_PEK_GEN, SEV_PDH_GEN, SEV_PEK_CSR, SEV_PEK_CERT_IMPORT, and SEV_PDH_CERT_EXPORT. After the firmware command, it does SEV_SHUTDOWN on the SEV firmware. Since these commands do not require SNP to be initialized, skip it by calling __sev_platform_init_locked() which only initializes the SEV firmware. This way SNP is not Initialized at all, and HSAVE_PA is not cleared. The previous code saved any SEV initialization firmware error to init_args.error and then threw it away and hardcoded the return value of INVALID_PLATFORM_STATE regardless of the real firmware error. This patch changes it to surface the underlying error, which is hopefully both more useful and doesn't cause any problems. Note that it is still safe to call __sev_firmware_shutdown() directly: it calls __sev_snp_shutdown_locked(), which skips SNP shutdown if SNP was not initialized. | ||||
| CVE-2026-47476 | 2 Linux, Nvidia | 2 Linux Kernel, Triton Inference Server | 2026-09-04 | 7.5 High |
| NVIDIA Triton Inference Server for Linux contains a vulnerability where an attacker can cause uncontrolled resource consumption. A successful exploit of this vulnerability might lead to denial of service. | ||||
| CVE-2026-85513 | 1 Stackstorm | 1 St2 | 2026-09-04 | 6.3 Medium |
| A weakness has been identified in StackStorm st2 up to 3.9.0. This issue affects the function assert_user_is_admin_if_user_query_param_is_provided of the file st2api/st2api/controllers/v1/actionexecutions.py of the component NoOp RBAC backend. This manipulation of the argument User causes improper privilege management. The attack is possible to be carried out remotely. The exploit has been made available to the public and could be used for attacks. Prior advisory CVE-2022-44009 was reported as a follow-up on the same sink, but this issue is distinct: it needs no Jinja RBAC und affects default install with RBAC disabled. The project was informed of the problem early through an issue report but has not responded yet. | ||||
| CVE-2026-80732 | 1 Linux | 1 Linux Kernel | 2026-09-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ata: pata_sl82c105: fix bridge revision use-after-free pci_get_slot() returns a referenced PCI device. Commit 44c10138fd4b ("PCI: Change all drivers to use pci_device->revision") replaced a configuration-space read with direct access to the cached revision field, but left that access after pci_dev_put(). The bridge may therefore be freed before its revision is read. Read the revision before dropping the reference. | ||||
| CVE-2026-80745 | 1 Linux | 1 Linux Kernel | 2026-09-04 | 8.4 High |
| In the Linux kernel, the following vulnerability has been resolved: regulator: fp9931: Fix VPOS/VNEG voltage selector table The VPOSNEG_table[] mapping does not match the FP9931 datasheet. The datasheet defines the VPOS/VNEG voltage mapping as: 00h-04h -> 7.04V (-7.04V) 05h -> 7.26V (-7.26V) 06h -> 7.49V (-7.49V) ... 28h-3Fh -> 15.06V (-15.06V) However, VPOSNEG_table[] has two issues: 1. Selector 0x00~0x04 should all map to 7.04V (5 entries), but the table has 6 entries of 7.04V, causing all subsequent entries to be shifted by one position. 2. Selectors 0x29~0x3F should all clamp to 15.06V (23 entries), but the table has only 41 entries. Any selector value above 0x28 would result in an out-of-bounds table access. Fix both issues by removing the duplicate 7.04V entry and appending the missing 23 clamped 15.06V entries, bringing the table to the correct size of 64 entries (0x00~0x3F). | ||||
| CVE-2026-80735 | 1 Linux | 1 Linux Kernel | 2026-09-04 | 7.3 High |
| In the Linux kernel, the following vulnerability has been resolved: ovpn: ensure socket is owned by ovpn before deref sk_user_data Some subsystems, like BPF SOCKMAP, set sk_user_data without actually setting the encap_type. For this reason, we must make sure that the type is the one ovpn expects before dereferencing sk_user_data. Failing to do so may lead to out-of-bounds reads. | ||||
| CVE-2026-80748 | 1 Linux | 1 Linux Kernel | 2026-09-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: mmc: loongson2: Fix sg iteration in data reorder functions In ls2k0500_mmc_reorder_cmd_data() and ls2k2000_mmc_reorder_cmd_data(), the for_each_sg() macro already iterates over the scatterlist entries, with 'sg' pointing to the current entry. However, the code incorrectly uses '&sg[i]' and 'sg_dma_len(&sg[i])' inside the loop, which treats 'sg' as an array base and indexes it again, leading to access of wrong sg entries (or out-of-bounds if the list is not an array). | ||||
| CVE-2026-80750 | 1 Linux | 1 Linux Kernel | 2026-09-04 | 8.4 High |
| In the Linux kernel, the following vulnerability has been resolved: pmdomain: mediatek: fix remaining %pOF after of_node_put() scpsys_get_bus_protection_legacy() looks up several legacy bus protection regmaps from device-tree nodes. Two error paths put the device node before checking whether the regmap lookup failed, but still pass that node to dev_err_probe() with %pOF on failure. If of_node_put() drops the last reference, the later %pOF formatting can dereference a freed device node. Keep the node reference until after the error message has been emitted in the infracfg and SMI lookup paths. Also drop the SMI node before returning when the SMI phandle is missing. | ||||
| CVE-2024-7837 | 1 Firmanet | 1 Erp | 2026-09-04 | 8.2 High |
| Improper Neutralization of Special Elements used in an SQL Command ('SQL Injection') vulnerability in Firmanet Software ERP allows SQL Injection. This issue affects ERP: before 15.0.1. | ||||
| CVE-2026-80751 | 1 Linux | 1 Linux Kernel | 2026-09-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: pmdomain: mediatek: mfg: initialize prev_o in mtk_mfg_attach_dev() mtk_mfg_attach_dev() reads prev_o on the first iteration of its loop, in "if (prev_o && prev_o->freq == o->freq)", before prev_o is assigned at the end of the loop body. On that first iteration, evaluating prev_o reads an indeterminate value. If it is non-NULL, the condition dereferences a stale or invalid pointer, potentially faulting or incorrectly skipping the first OPP. Initialize prev_o to NULL. This matches the intent as well: there is no previous OPP to compare against on the first iteration. Found with Clang's -Wconditional-uninitialized. | ||||
| CVE-2025-11537 | 1 Redhat | 2 Build Keycloak, Build Of Keycloak | 2026-09-04 | 5 Medium |
| A flaw was found in Keycloak. When the logging format is configured to a verbose, user-supplied pattern (such as the pre-defined 'long' pattern), sensitive headers including Authorization and Cookie are disclosed to the logs in cleartext. An attacker with read access to the log files can extract these credentials (e.g., bearer tokens, session cookies) and use them to impersonate users, leading to a full account compromise. | ||||
| CVE-2026-80736 | 1 Linux | 1 Linux Kernel | 2026-09-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: thunderbolt: Fix bandwidth group reservation indexing Valid bandwidth group IDs range from 1 through MAX_GROUPS, while Group ID 0 is reserved. tb_consumed_dp_bandwidth() uses the Group ID directly to index its local group_reserved[] array. The array currently has MAX_GROUPS entries, so its valid indices are 0 through MAX_GROUPS - 1. Group ID MAX_GROUPS therefore accesses one element past the end, and the final group's reserved bandwidth is not included when the array is summed. Give group_reserved[] MAX_GROUPS + 1 entries so direct Group ID indexing covers the reserved ID 0 and valid IDs 1 through MAX_GROUPS. | ||||
| CVE-2026-80741 | 1 Linux | 1 Linux Kernel | 2026-09-04 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/log: Fix out-of-bounds read on empty message length drm_log_draw_kmsg_record() accesses s[len - 1] to strip the trailing newline, but len is unsigned int. If len is 0, the subtraction wraps to UINT_MAX, causing an out-of-bounds read. Add an early return when len is 0. | ||||
| CVE-2026-80749 | 1 Linux | 1 Linux Kernel | 2026-09-04 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/connector/hdmi: Fix out of bounds memory read A helper function was copying a given audio infoframe into the connector's copy but using the size of the destination (a generic target, sized to accept many different data blocks) not the source (a very specific type of data block). Thus, it was copying 60 bytes of data from a 28 byte allocation. Fix that by using the source size instead, together with a build bug on the source size actually being smaller than the destination. I hit this running KUnit tests under KASAN (while debugging something else entirely). In the real world, it seems unlikely to cause an actual problem. It is a read not a write so it can't corrupt any memory. However, it could potentially fall off the end of a page and cause an accvio bug. | ||||
| CVE-2026-80752 | 1 Linux | 1 Linux Kernel | 2026-09-04 | 8.4 High |
| In the Linux kernel, the following vulnerability has been resolved: Input: psxpad-spi - set driver data before use psxpad_spi_suspend() retrieves the controller state with spi_get_drvdata(), but probe never stores it, so suspend dereferences a NULL pointer. Store it during probe. | ||||
| CVE-2026-19582 | 2 Gnu, Redhat | 5 Binutils, Enterprise Linux, Hardened Images and 2 more | 2026-09-04 | N/A |
| Red Hat Product Security has come to the conclusion that this CVE is false due to upstream security policy. | ||||
| CVE-2026-84809 | 1 Tencent | 2 Ai-infra-guard, Aig-skill-scan | 2026-09-04 | 6.5 Medium |
| Tencent AI-Infra-Guard's skill-scan component excludes compiled Python bytecode files from analysis by hardcoding __pycache__ directories and .pyc/.pyo/.pyd extensions into skip lists across multiple scanning surfaces. Attackers can distribute skills with benign Python source files alongside malicious compiled bytecode that executes on import while the scanner reports a safe verdict, enabling code execution when operators install the skill. | ||||