Export limit exceeded: 90973 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (90973 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-64522 | 1 Linux | 1 Linux Kernel | 2026-08-03 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: Fix eswitch mode block underflow on IPsec acquire SA mlx5e_xfrm_add_state() handles acquire-flow temporary SAs by allocating software state and skipping hardware offload setup. That path jumps to the common success label before taking the eswitch mode block. After tunnel-mode validation was moved earlier, the common success label unconditionally calls mlx5_eswitch_unblock_mode(). For acquire SAs, this decrements esw->offloads.num_block_mode without a matching increment. Return directly after installing the acquire SA offload handle, so only the paths that successfully called mlx5_eswitch_block_mode() call the matching unblock. | ||||
| CVE-2026-64525 | 1 Linux | 1 Linux Kernel | 2026-08-03 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: xfrm: move policy_bydst RCU sync from per-netns .exit to .pre_exit The struct pernet_operations docstring in include/net/net_namespace.h explicitly warns against blocking RCU primitives in .exit handlers: Exit methods using blocking RCU primitives, such as synchronize_rcu(), should be implemented via exit_batch. [...] Please, avoid synchronize_rcu() at all, where it's possible. Note that a combination of pre_exit() and exit() can be used, since a synchronize_rcu() is guaranteed between the calls. xfrm_policy_fini() violates this: it calls synchronize_rcu() before freeing the policy_bydst hash tables (so no RCU reader is mid- traversal at free time), but runs from xfrm_net_ops.exit -- once per namespace -- so a cleanup_net() of N namespaces pays N full RCU grace periods serially. Use the documented pre_exit/exit split. Move the policy flush (and the workqueue drains it depends on) into a new .pre_exit handler; xfrm_policy_fini() then runs in .exit and frees the hash tables after the synchronize_rcu_expedited() that cleanup_net() guarantees between the two phases. Providing O(1) RCU grace periods per batch instead of O(N). Observed on Linux 6.18 with a workload doing unshare(CLONE_NEWNET) at ~13/sec sustained: cleanup_net() and the netns_wq rescuer kthread both stuck in xfrm_policy_fini()'s synchronize_rcu(), >300k struct net accumulated in the cleanup queue, Percpu in /proc/meminfo climbed to 130+ GB on 256-CPU hosts, and memcg OOMs followed. setup_net and __put_net counts were balanced, ruling out a refcount leak. | ||||
| CVE-2026-67322 | 1 Gitpython-developers | 1 Gitpython | 2026-08-03 | 7.5 High |
| GitPython before 3.1.52 is vulnerable to environment-variable exfiltration in Repo.clone_from(). The caller-supplied remote URL is passed through Git.polish_url(), which on non-Cygwin platforms calls os.path.expandvars() on the URL before invoking git clone. An attacker who controls the clone URL can embed $NAME or ${NAME} tokens that are expanded to the values of the hosting process's environment variables (e.g., AWS_SECRET_ACCESS_KEY or GITHUB_TOKEN). The resulting URL, now containing the secret, is transmitted over the network to an attacker-controlled host during the clone attempt, disclosing the secret. | ||||
| CVE-2026-67297 | 1 Freerdp | 1 Freerdp | 2026-08-03 | 7.5 High |
| FreeRDP before 3.29.0 fails to enforce the RESPONSE_SIZE_LIMIT when processing Transfer-Encoding: chunked HTTP responses in http_response_recv_body(). Attackers controlling a malicious RD Gateway endpoint can send oversized chunked response bodies to exhaust client memory resources without triggering the configured size limit. | ||||
| CVE-2026-67301 | 1 Freerdp | 1 Freerdp | 2026-08-03 | 7.5 High |
| FreeRDP before 3.29.0 contains out-of-bounds read vulnerabilities in the async update message proxy for the PolygonSC and PolygonCB primary drawing orders. When AsyncUpdate is enabled (e.g., xfreerdp /async-update), update_message_PolygonSC() and update_message_PolygonCB() allocate a fresh points array but copy point data from the address of the order structure instead of from polygonSC->points / polygonCB->points, resulting in a client-side out-of-bounds read. A malicious or compromised RDP server sending crafted PolygonSC/PolygonCB update orders can trigger memory disclosure or a client crash. | ||||
| CVE-2025-63913 | 1 Luojia65 | 1 Opensbi | 2026-08-03 | 7.5 High |
| An issue was discovered in OpenSBI 1.3 allowing attackers to cause a denial of service via crafted request to the SBI function #2 or the 'Find and configure a matching counter' function of SBI PMU extension. | ||||
| CVE-2026-41453 | 1 Krayin | 1 Laravel-crm | 2026-08-03 | 8.8 High |
| Krayin CRM before 2.2.4 contains a blind SQL injection vulnerability in the leads DataGrid that allows authenticated users with leads access to inject arbitrary SQL into a HAVING clause by manipulating the rotten_lead[in] query parameter, which is concatenated without parameterized binding directly into a havingRaw() call in LeadDataGrid.php. Attackers can exploit this flaw using time-based and boolean-based blind injection techniques to extract the entire database contents, including user credential hashes, CRM records, and application configuration data. | ||||
| CVE-2026-67304 | 1 Freerdp | 1 Freerdp | 2026-08-03 | 7.5 High |
| FreeRDP before 3.29.0 contains a null pointer dereference vulnerability in smartcard device control request cleanup when reader-state decoding fails. Attackers can send malformed smartcard IRP requests with non-zero cReaders and truncated reader-state data to crash the process via null pointer access in free_reader_states functions. | ||||
| CVE-2026-67314 | 1 Axios | 1 Axios | 2026-08-03 | 8.9 High |
| axios versions >=1.15.2 and <1.18.0 contain prototype-pollution read-side gadgets in Basic auth subfield handling (lib/adapters/http.js and lib/helpers/resolveConfig.js). When an application is already affected by a separate prototype-pollution primitive and makes an axios request with an own auth object that omits the username and/or password properties, axios reads the inherited Object.prototype.username and Object.prototype.password values and uses them to construct an outbound 'Authorization: Basic ...' header. axios itself does not pollute prototypes. The practical impact is outbound request tampering: an attacker who controls the polluted prototype values can inject attacker-chosen Basic auth credentials or replace an existing Authorization header. Credential disclosure is only possible under additional application-specific conditions. | ||||
| CVE-2026-64536 | 1 Linux | 1 Linux Kernel | 2026-08-03 | 8.1 High |
| In the Linux kernel, the following vulnerability has been resolved: staging: rtl8723bs: fix OOB reads in is_ap_in_tkip() IE loop The loop in is_ap_in_tkip() iterates over IEs without verifying that enough bytes remain before dereferencing the IE header or its payload: - pIE->element_id and pIE->length are read without checking that i + sizeof(*pIE) <= ie_length, so a truncated IE at the end of the buffer causes an OOB read. - For WLAN_EID_VENDOR_SPECIFIC the code compares pIE->data + 12, which requires pIE->length >= 16. For WLAN_EID_RSN it compares pIE->data + 8, requiring pIE->length >= 12. Neither requirement is checked. Add the missing IE header and payload bounds checks and guard each data access with an explicit pIE->length minimum, matching the pattern established in update_beacon_info(). | ||||
| CVE-2026-67610 | 1 Openemr | 1 Openemr | 2026-08-03 | 8.1 High |
| OpenEMR through 8.2.0 contains an improper authentication vulnerability in the OAuth2 dynamic client registration endpoint that allows unauthenticated attackers to register a malicious client with system-level FHIR scopes by supplying a self-generated RSA keypair via the jwks field. Once an administrator approves the registered client, attackers can use the client_credentials grant with a self-signed JWT assertion to obtain access tokens granting read access to all FHIR resources across all patients in the system. | ||||
| CVE-2026-67331 | 1 Better-auth | 1 Scim | 2026-08-03 | 8.3 High |
| better-auth SCIM versions from 1.5.0 before 1.7.0-beta.4 fail to bind non-organization SCIM providers to their creator by default, allowing authenticated users to manage other users' providers. Attackers can regenerate SCIM bearer tokens, invalidate legitimate tokens, and authenticate to SCIM API routes with the attacker-controlled token. | ||||
| CVE-2026-16285 | 2026-08-03 | 7.5 High | ||
| The Product Attachment for WooCommerce WordPress plugin before 2.3.3 does not perform any authorization check before streaming media library files, allowing unauthenticated users to download any attachment — including private or unlinked uploads — by enumerating its numeric ID. | ||||
| CVE-2026-67296 | 1 Freerdp | 1 Freerdp | 2026-08-03 | 7.5 High |
| FreeRDP before 3.29.0 contains a denial of service vulnerability in the RDPEI server channel handler that fails to validate maximum PDU body length before stream allocation. A malicious RDP client can send a header-only RDPEI message with a large declared body length to force excessive memory allocation on the server. | ||||
| CVE-2026-16261 | 2026-08-03 | 7.5 High | ||
| The login-social WordPress plugin through 1.0.4 does not validate password-reset requests against a reset key or the requester's identity, and it issues authentication sessions from unverified third-party sign-in data, allowing unauthenticated attackers to reset any user's password or log in as any existing account, including administrators, and take over the site. | ||||
| CVE-2026-15241 | 2026-08-03 | 7.5 High | ||
| The AI ChatBot for WooCommerce WordPress plugin before 4.8.4 does not perform any authorization or nonce check on one of its AJAX actions, allowing unauthenticated users to abuse the site owner's stored third-party API key to send requests billed to the owner's account and, when an optional feature is enabled, to retrieve indexed knowledge-base content. | ||||
| CVE-2026-15206 | 2026-08-03 | 7.5 High | ||
| The SMS Alert WordPress plugin before 3.9.8 does not bind its "mobile verified" session flag to the phone number that was actually verified: after an attacker verifies an OTP sent to their own phone, the signup/login handler reads a fresh, attacker-supplied phone number to select the account and logs them in. An unauthenticated attacker can therefore log in as any user, including an administrator, who has a billing phone on file. | ||||
| CVE-2026-15151 | 2026-08-03 | 7.5 High | ||
| The Five Star Restaurant Reservations WordPress plugin before 2.7.23 does not perform a capability check on one of its AJAX actions, allowing users with the lowest booking-management role (which by default cannot access the Five Star Restaurant Reservations WordPress plugin before 2.7.23's settings) to reset the site's configured booking notification rules. | ||||
| CVE-2026-15988 | 2 Tigroumeow, Wordpress | 2 Ai Engine – The Chatbot And Ai Framework For Wordpress, Wordpress | 2026-08-03 | 8.8 High |
| The AI Engine – The Chatbot, AI Framework & MCP for WordPress plugin for WordPress is vulnerable to Cross-Site Request Forgery in all versions up to, and including, 3.6.5 This is due to missing or incorrect nonce validation on the reauth_for_authorize function. This makes it possible for unauthenticated attackers to create new administrator accounts with attacker-supplied credentials via a CSRF-based REST authentication bypass, granted they can trick a site administrator into performing an action such as clicking on a link. This bypass can be combined with WordPress's ?_method=POST method-override support to convert a top-navigation GET request into an authenticated POST to the REST users endpoint, requiring no existing account on the attacker's part. | ||||
| CVE-2026-53505 | 1 Thumbor | 1 Thumbor | 2026-08-03 | 7.5 High |
| Thumbor is an open-source photo thumbnail service by globo.com. Prior to 7.8.0, Thumbor's filters:proportion(<value>) filter does not enforce an upper bound on <value> and runs in the post-transform phase. An attacker can trigger extremely large resizes (CPU/memory exhaustion) and cause denial of service. This issue is fixed in 7.8.0. | ||||