Export limit exceeded: 428199 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.

Export limit exceeded: 428199 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.

Search

Search Results (428199 CVEs found)

CVE Vendors Products Updated CVSS v3.1
CVE-2026-126616 1 Progressive Robot 1 Hmailserver 2026-11-17 5.3 Medium
The auto-ban of Progressive Robot hMailServer 6.2.0 through 6.3.3, with a MySQL or MariaDB database, can be kept from banning an address after repeated failed logons, which allows a remote unauthenticated attacker to go on guessing account passwords from a single address without being banned. The server makes its MySQL tables in MySQL's utf8 character set, which holds no character outside the Basic Multilingual Plane, sends its statements as UTF-8 over a utf8mb4 connection and leaves the database's default strict mode in place. From 6.2.0 it decodes the user name of a SASL PLAIN logon as UTF-8, so the name can hold such a character. When the failed logons counted from one address reach MaxInvalidLogonAttempts (3 by default), the server clears that address's count, saves an IP range named "Auto-ban: " followed by the user name of the logon that reached the limit, and drops the connection. If such a character is in the part of the user name that the range's name keeps (the name is cut to 100 characters), the database refuses the range: no range is saved, the address is not refused, and, its count having already been cleared, it is given the next full set of attempts. An attacker can in this way spend all but the last attempt of each set on password guesses, and make the last under such a name. On Windows, POP3 AUTH PLAIN reaches it on a server as installed, and IMAP AUTHENTICATE PLAIN where IMAP SASL authentication is turned on (off by default); on Windows and on Linux (from 6.3.0), SMTP AUTH PLAIN reaches it where plain-text authentication is allowed (off by default), and ManageSieve and CardDAV where they are turned on (off by default). Each failed save is reported in the server's error log. A database whose strict mode has been turned off stores the character as a question mark and makes the first such ban, but refuses every later ban named after the same user name, or after one holding other such characters in their place, as a duplicate while the first stands, since the server cannot look up a name holding such a character there.
CVE-2026-126615 1 Progressive Robot 1 Hmailserver 2026-11-17 5.3 Medium
The sign-in of Progressive Robot hMailServer 6.2.22-pre2 through 6.3.7 takes for an account names that are not its address but under which the database's own comparison finds it, while the per-name lockout and the compromised-account hold are kept by the name as the client gave it. This allows a remote unauthenticated attacker to go on guessing an account's password beyond the lockout's threshold, and anyone who has the password of an account held for review to sign in to it. The per-name lockout (from 6.2.22-pre2; AccountLockoutThreshold in hMailServer.ini, 0, off, by default) locks a name after repeated failed sign-ins. The hold (from 6.3.4, where the compromised-account detection is set to enforce, which is not the default) refuses an account judged to have been taken over. Both are asked, before the password, of the name the client gave: trimmed, in lower case and with a domain alias or the default domain applied. The account whose password the sign-in then checks is whichever one the database finds under that name. The databases find an account under spellings that this key counts apart. MySQL and MariaDB find it under one with accented letters in place of plain ones, and MariaDB 11.8, in a database made before 6.3.4, also under one with full-width letters, with a single letter in place of a pair of plain ones, or with characters its comparison ignores in any number. SQL Server and SQL Server Compact find it under one with full-width letters or with characters their comparison ignores in any number, and SQL Server also under one with a single letter in place of a pair of plain ones, with a character of Latin-1 in place of a digit and, for an address holding letters of Latin-1 outside ASCII, under those letters in the other case, and, under an accent-insensitive collation, with accented letters. PostgreSQL finds it under one holding a letter whose lower case under the database's locale is a plain letter, and, for an address holding letters outside ASCII, under those letters in the other case; on the build for musl (from 6.3.6) the server's own lower case folds nearly all of these too. On every database, a domain alias saved with white space at the end of its name gives such a spelling too, and on every database but PostgreSQL so does an account's bare local part where the default domain was saved with spaces at its end and no other white space (neither is the default). Each such spelling has a lockout threshold of its own, so the lockout limits the guesses at an account only to its threshold times the number of the account's spellings. That is far beyond any threshold for most addresses on MySQL and MariaDB, and without limit on SQL Server, on SQL Server Compact, the database the Windows installer uses by default, and before 6.3.4 on MariaDB 11.8. A locked name is got round under another spelling. A held account is signed in to under another spelling with its password over IMAP, POP3 and SMTP AUTH, and, where they are turned on (off by default), over ManageSieve, the REST API and the webmail. IMAP LOGIN, offered as installed, carries such spellings on MySQL, MariaDB and SQL Server Compact, and, on SQL Server and PostgreSQL, for some addresses; the sign-ins that carry a name as UTF-8 carry them for the others on SQL Server, and on PostgreSQL for those holding one of the plain letters another letter lowers to or a letter outside ASCII with another case. The same lookup mapped to accounts the names given by an OAuth 2.0 token, a client certificate, a Kerberos ticket and an OpenID Connect or SAML identity provider, where those are set up (none is by default), so that a name an issuer gave to one party could sign in to another's account; OAuth 2.0 tokens were mapped so from 6.2.0, before the per-name lockout existed. A name holding a NUL character, carried from 6.3.0 on Linux and 6.3.3 on Windows, failed the statement on MySQL, MariaDB and PostgreSQL.
CVE-2026-126614 1 Progressive Robot 1 Hmailserver 2026-11-17 5.3 Medium
The web services listener of Progressive Robot hMailServer 6.3.3 through 6.3.7 does not apply the server's IP ranges to the connections it accepts, which allows a remote unauthenticated attacker to go on guessing account passwords at the listener's sign-ins after the auto-ban has banned the attacker's address. The listener is off by default (WebServicesHttpPort and WebServicesHttpsPort 0). From 6.3.3 its CardDAV, and from 6.3.4 its CalDAV and its Outlook Autodiscover answer to a request that carries credentials, sign an account in with HTTP Basic over HTTPS. A failed sign-in there counts towards the auto-ban as a failed logon on any other protocol does: when the failures counted from one address reach MaxInvalidLogonAttempts (3 within 30 minutes by default), the server writes an IP range that refuses the address for AutoBanMinutes (60 by default), and the SMTP, POP3, IMAP and ManageSieve listeners refuse it. The web services listener asked no IP range when it accepted a connection (in 6.3.3 nothing, from 6.3.4 the country policy alone), so it went on serving such an address, whether its ban had been earned there or on another protocol, and also an address that an administrator's IP range allowing nothing holds. Each failed sign-in there closed only its own connection, and the next connection was accepted, during the ban and after it. The firewall rule and command the auto-ban can drive (AutoBanFirewall and AutoBanCommand, off by default) are told only the SMTP, POP3 and IMAP ports, so that the firewall rule and the packaged hook did not close the listener's ports, and the fail2ban jail packaged for Linux (off by default) lists only the mail and ManageSieve ports. The only limit left on the guesses at one account there was the per-name lockout (AccountLockoutThreshold in hMailServer.ini, 0, off, by default), which has a separate defect fixed in the same release. The flaw is reached on the listener's HTTPS port: behind a TLS-terminating proxy the listener sees the proxy's address for every client, and a ban never named the client there.
CVE-2026-126613 1 Progressive Robot 1 Hmailserver 2026-11-17 7.5 High
Allocation of resources without limits in the JSON reader of Progressive Robot hMailServer 6.3.2 through 6.3.7 allows a remote attacker to exhaust the server's memory and hold its threads, making mail delivery, the REST API and the webmail unavailable. The reader built a tree of values far larger than the text it read, copying each value into every level above it, and set no bound on the number of values, so a single JSON document of many small values, within the 16 MB the server reads, raised the service's memory by about 2 GB and held one thread for seconds to minutes. From 6.3.4 a remote unauthenticated attacker reaches the reader by mailing such a document as a TLS-RPT report, up to 16 MB once decompressed, to a hosted domain's report mailbox, where an administrator has set one; it is read on a mail delivery thread (ten by default), and those threads deliver all mail, local and outbound. From 6.3.4 it is also reached without an account through the reply to a password-protected message, with the message's link alone, where the REST API is on (it is off by default) and a public base URL for such links is set; and by any account, from 6.3.2 through the webmail's send and draft routes and from 6.3.4 through its other routes granted 16 MB and the send API; the webmail's send, draft and settings routes parsed the body again for each member read. The REST API serves every request on four worker threads, in the process that also serves SMTP, IMAP and POP3, so a few such documents at once make it unavailable and can exhaust the machine's memory and end the whole service. This is a separate defect from CVE-2026-107574, the reader's handling of duplicate member names, fixed in 6.3.6.
CVE-2026-126612 1 Progressive Robot 1 Hmailserver 2026-11-17 7.8 High
Improper link resolution in the Windows installer of Progressive Robot hMailServer 6.0.0 through 6.3.7 allows a local authenticated user to run code as the mail server's service account or as an administrator when the path to the program folder passes through a junction, a symbolic link or a mount point that the user controls or that every user may change, such as a junction made at the root of a drive, which takes the root's permissions, or through a folder that every user may rename. Setup installed the programs through any such link without first checking who controls it, or whether a folder above the program folder may be renamed, and the service is registered to run the programs by that path, so the programs are installed where a link another account controls leads, or that account can later make the path lead to a folder it controls; the service, which runs as LocalSystem or as its virtual account, and the programs administrators run from Bin are then started from there. 6.3.7's fix for CVE-2026-107571 does not cover this: its hardening of the program folder, Bin and ControlPanel does not change a folder reached through a link that the administrators do not alone control, and setup does not refuse such a path: it installs through the link and at most reports afterwards that the folders could not be hardened. The default installation under Program Files is not affected.
CVE-2026-126610 1 Progressive Robot 1 Hmailserver 2026-11-17 7.4 High
Progressive Robot hMailServer 6.3.4 through 6.3.7, with a MySQL or MariaDB database and TlsMode=verify-full, does not hand the database client the CA file that TlsCaFile names when the file's name contains a character outside ASCII on Linux, or above U+00FF on Windows, which allows an attacker who can intercept the connection to the database server to read and modify the traffic between hMailServer and its database, by presenting, with MariaDB Connector/C 3.4.2 to 3.4.10 as the client, a certificate from any authority, its own included, for any name, and otherwise a certificate for the database server's name issued by any certificate authority in the system's trust store. The server converted the name for the client with the C runtime's conversion in the C locale, which gives an empty string for such a name, and then set no CA file at all, without an error, while certificate verification stayed on, so the client - MariaDB Connector/C, bundled on Windows and the distribution's on Linux - verified the certificate of a database server over the network against the system's trust store instead of the configured CA; Connector/C 3.4.2 to 3.4.10 (bundled on Windows in 6.3.4 to 6.3.6) went further and, with no CA file, took a certificate within its dates whose issuer it could not find, for any name, with neither its chain nor its name checked and no password proof, when the server offered first a sign-in method that hashes the password, which an attacker in the middle chooses (MariaDB's CONC-853, fixed in Connector/C 3.4.11), and Connector/C 3.4 accepted from a MariaDB 11.4 or later server a certificate the store did not vouch for when that server proved it held the account's password; on a connection it treats as local (127.0.0.1, ::1, a Unix socket, a named pipe, and localhost on Windows), Connector/C 3.4.1 and later checked neither the certificate's issuer nor its name, so that a local attacker able to stand in for the database server could present any certificate within its dates of its own making. The settings line of hmailserver --check-database still named the configured file, and the application log said the certificate had been checked. With MariaDB Connector/C 3.4.1 to 3.4.9 as the client - bundled on Windows in 6.3.4 to 6.3.6, and the client of Linux distributions that have not patched it - the missing CA file also met the precondition of CVE-2026-107819, so that a certificate issued for any other name by a trusted authority was enough to obtain the database password. On Linux the file was found only when the server ran on glibc under a locale whose character set holds the name's characters (a UTF-8 locale, or a legacy 8-bit one the system has, in whose bytes the file is then named); with no locale, LC_ALL=C or a locale the system lacks, and on Alpine (musl), the connection failed instead. The configuration is not the default: TlsMode defaults to prefer, which checks no certificate.
CVE-2026-126458 2 Open-emr, Openemr 2 Openemr, Openemr 2026-11-17 8.8 High
OpenEMR before 8.5.0 contains a missing authorization vulnerability in authorizations_full.php that allows any authenticated staff user to authorize arbitrary patients' clinical records. Attackers can send a mode=authorize request with an attacker-chosen pid and their own CSRF token to set authorized=1 on billing, forms, pnotes, and transactions records, bypassing provider review.
CVE-2026-126454 2 Open-emr, Openemr 2 Openemr, Openemr 2026-11-17 8.1 High
OpenEMR before 8.5.0 lacks rate limiting or lockout on TOTP submission, allowing attackers with a valid password to brute-force the 6-digit MFA code. Attackers can script repeated POST requests to main_screen.php or the OAuth2 authorization flow with re-submitted hidden credentials to bypass two-factor authentication.
CVE-2026-126450 2 Open-emr, Openemr 2 Openemr, Openemr 2026-11-17 5 Medium
OpenEMR before 8.5.0 contains a stored cross-site scripting vulnerability that allows authenticated users to inject scripts by placing payloads in the patient External ID field. The payload executes when other users open the patient's prescriptions via View Printable Version (HTML), running script in their browser sessions.
CVE-2026-126446 2 Open-emr, Openemr 2 Openemr, Openemr 2026-11-17 4.3 Medium
OpenEMR before 8.5.0 contains a missing authorization vulnerability that allows any authenticated core user to retrieve destroyed-drug records because destroyed_drugs_report.php lacks the admin/drugs or inventory/reporting ACL check. Attackers can submit the report refresh form with a chosen date range to obtain drug names, NDC, lots, quantities, destruction methods, witnesses, and notes.
CVE-2026-126442 2 Open-emr, Openemr 2 Openemr, Openemr 2026-11-17 8.1 High
OpenEMR before 8.5.0 contains a missing authorization vulnerability in create_portallogin.php that allows low-privilege authenticated users to replace patient portal credentials without ACL checks. Attackers can select a victim patient in session and post replacement credentials to take over portal accounts, read PHI, and lock patients out.
CVE-2026-126434 2 Open-emr, Openemr 2 Openemr, Openemr 2026-11-17 8.1 High
OpenEMR before 8.5.0 contains a missing authorization vulnerability in interface/forms/procedure_order/common.php that allows authenticated accounts lacking patients/lab permission to read and modify other patients' procedure orders. Attackers can request a global order id to disclose clinical history, or select the target patient in their session and submit bn_save to falsify diagnoses, instructions, and order status.
CVE-2026-126430 2 Open-emr, Openemr 2 Openemr, Openemr 2026-11-17 8.1 High
OpenEMR before 8.5.0 contains an sql injection vulnerability that allows any authenticated core user to inject SQL by supplying crafted patient_data field names to the CCR revandapprove controller. Attackers can embed scalar subqueries in the UPDATE patient_data SET clause to read staff password hashes and portal reset values, alter arbitrary patient demographics, and take over patient-portal accounts.
CVE-2026-126426 2 Open-emr, Openemr 2 Openemr, Openemr 2026-11-17 4.3 Medium
OpenEMR 5.0.2 before 8.5.0 contains a missing authentication vulnerability in mfa_registrations.php and mfa_u2f.php that allows session hijackers to delete MFA factors or register U2F keys without password re-entry. Attackers holding a victim's authenticated session can remove all second factors or add their own U2F key, bypassing MFA at later logins with the password.
CVE-2026-126418 2 Open-emr, Openemr 2 Openemr, Openemr 2026-11-17 6.3 Medium
OpenEMR before 8.5.0 contains a stored cross-site scripting vulnerability in interface/billing/sl_eob_invoice.php, which escapes billing codes for HTML attributes but not for JavaScript strings in an inline onkeyup handler. Clinicians with encounter coding access can save crafted billing codes through diagnosis.php that execute script when a Back Office user enters a payment, exposing patient and financial data or performing actions as that user.
CVE-2026-126406 1 Bytecodealliance 1 Wasmtime 2026-11-17 3.7 Low
The wasmtime-wasi-http p2 implementation in Wasmtime before 36.0.20, 37.0.0 before 48.0.8, 49.0.0 before 49.0.5, and 50.0.0 before 50.0.1 can send conflicting content-length headers, or ones not matching the body, in outgoing requests. A guest that reuses a received response's headers resource to send a bodyless request can enable request smuggling against non-compliant servers, potentially bypassing embedder destination access controls.
CVE-2026-126331 1 Devolutions 2 Devolutions Server, Server 2026-11-17 2.7 Low
Insertion of sensitive information into sent data in the user list endpoint in Devolutions Server 2026.3.13.0 and earlier allows an authenticated user with delegated user-viewing permissions to obtain users' API key secret hashes via the user list API response.
CVE-2026-126328 1 Devolutions 2 Devolutions Server, Server 2026-11-17 2.7 Low
Insertion of sensitive information into sent data in the user endpoints in Devolutions Server 2026.3.13.0 and earlier allows an authenticated user with delegated user-viewing permissions to obtain users' MFA shared secrets via the user API responses.
CVE-2026-126327 1 Devolutions 2 Devolutions Server, Server 2026-11-17 6.5 Medium
Improper access control in the connection history in Devolutions Server 2026.3.13.0 allows an authenticated user without the permission to view passwords to obtain historical entry passwords via the connection history API.
CVE-2026-126326 1 Devolutions 2 Devolutions Server, Server 2026-11-17 6.5 Medium
Improper access control in the administrative role assignment endpoint in Devolutions Server 2026.3.13.0 and earlier allows an authenticated user with only vault assignment management rights to escalate privileges and read vault entry passwords via a crafted role assignment request.