Export limit exceeded: 410810 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (410810 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-98616 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: eth: fbnic: reset num_napi when the napi vectors are freed fbn->num_napi is the count of live napi vectors, each of which owns an IRQ. The PM path had freed them without clearing the count. fbnic_pm_suspend() tears the datapath down via ndo_stop() and frees the IRQs, but leaves netif_running() true so resume knows to re-open. Resume rebuilds the datapath in __fbnic_pm_resume() and fbnic_reset_queues() sets num_napi and __fbnic_open() re-allocates the vectors. When the datapath is torn down but never rebuilt, num_napi is left pointing at freed vectors under 2 different scenarios: - a PCIe error recovery that fails (fbnic_err_slot_reset() -> __fbnic_pm_resume() returns an error -> PCI_ERS_RESULT_DISCONNECT), so .resume never runs; or - an __fbnic_open() that fails partway on resume and unwinds, freeing the vectors after fbnic_reset_queues() has already set num_napi. The netdev is then running with num_napi > 0 but napi[] freed, and the eventual remove/unbind close re-enters fbnic_down() -> fbnic_dbg_down() and dereferences the freed vectors: BUG: kernel NULL pointer dereference, address: 0000000000000210 RIP: fbnic_dbg_down+0x28 Clear num_napi when the vectors are freed: in the suspend teardown (a good resume re-establishes it before __fbnic_open()) and on the resume open failure. A redundant ndo_stop() then walks an empty napi[]. The normal ndo_stop() down/up cycle is untouched and keeps num_napi for the next ndo_open(). | ||||
| CVE-2026-98664 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: iio: imu: adis16400: fix unprotected debugfs reads adis16400_serial_number_fops is open coded and never calls debugfs_file_get(), so debugfs_remove_recursive() does not wait for a read in progress and unbind frees the iio_dev underneath it. Commit ae1d37a9bb4b ("iio: imu: adis16400: use DEFINE_DEBUGFS_ATTRIBUTE instead of DEFINE_SIMPLE_ATTRIBUTE") converted product_id and flash_count to DEFINE_DEBUGFS_ATTRIBUTE, which protects itself, but moved all three files to debugfs_create_file_unsafe(). serial_number prints three registers as "%.4x-%.4x-%.4x" and DEFINE_DEBUGFS_ATTRIBUTE() formats a single u64, so it cannot be converted without changing what the file returns. adis16475 and adis16550 already use debugfs_create_file() for their open coded files. Use it here too. | ||||
| CVE-2026-98685 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: discard post-EOF pagecache when extending a file via clone range cifs_remap_file_range() discarded the pagecache only for the folios overlapping the destination region, so when a clone extends the file the folio straddling the old EOF - which may hold data dirtied past EOF through an mmap - was never dropped and became visible as file content once the file was extended. Start the discard at the smaller of fstart and the old EOF. i_size is still old here, so nothing past the old EOF is flushed to the server. | ||||
| CVE-2026-98783 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/mediatek: Add missing IS_ERR check for ovl_adaptor platform device platform_device_register_data() can fail and return an ERR_PTR, but the return value is used without checking, leading to an invalid pointer being stored in ddp_comp[].dev and passed to component_match_add() and mtk_ddp_comp_init(), which could result in a kernel crash. Add an IS_ERR() check to jump to the error handling path on failure. | ||||
| CVE-2026-92392 | 1 Redhat | 1 Hummingbird | 2026-10-18 | 8.1 High |
| During an upload, curl mishandles HTTP/2 `RST_STREAM` received from the server (with reason `HTTP_1_1_REQUIRED` or `REFUSED_STREAM`) leading to a use after free of a `struct Curl_easy` object. | ||||
| CVE-2026-112030 | 1 Diem-project | 1 Diem | 2026-10-18 | 6.3 Medium |
| A vulnerability was found in diem-project diem up to 5.1.3. This vulnerability affects unknown code of the file dmCorePlugin/lib/data/dmDataLoad.php. Performing a manipulation results in use of default password. The attack is possible to be carried out remotely. The exploit has been made public and could be used. It is suggested to update the configuration settings. The project was informed of the problem early through an issue report but has not responded yet. | ||||
| CVE-2026-98639 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: KVM: riscv: Fix NACL hfence entry update order The SBI v3.0 specification (section 15.1.2) requires a nested HFENCE entry to be populated as follows: 1) find an unused entry with Config.Pending == 0 2) update the Page_Number and Page_Count words 3) update the Config word with Config.Pending set __kvm_riscv_nacl_hfence() writes the Config word first, so the SBI implementation (or NACL hardware) can observe a pending entry with pnum/pcount values left over from the previous use of that entry, resulting in incorrect TLB flush ranges. Write pnum and pcount first and the Config word last. Since the consumer is an external agent on coherent shared memory, use WRITE_ONCE() to stop the compiler from reordering the stores and smp_wmb() to make the parameter words globally visible before the Pending bit is set. | ||||
| CVE-2026-98657 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: iio: proximity: pulsedlight: fix iio_device left registered on PM setup failure pm_runtime_set_active() failing in probe() jumps to error_unreg_buffer, which only calls iio_triggered_buffer_cleanup() -- it does not undo the iio_device_register() that already succeeded a few lines above. probe() then returns the error, the devm-managed indio_dev is freed, but the iio core still has it registered: the sysfs/chardev nodes stay live and point at freed memory. Add an error_unreg_dev label that unregisters the iio device before falling through to the existing buffer cleanup, mirroring the teardown order already used in lidar_remove(). | ||||
| CVE-2026-98661 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: iio: light: rohm-bu27034: Fix infinite delay on error When reading an integration-time fails, the code will use error code to compute the sleep time. Fix this by using the smallest integration time as a default if reading fails. | ||||
| CVE-2026-98678 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: iio: adc: ad4030: fix invalid oversampling_ratio validation In ad4030_set_avg_frame_len(), the logarithm is calculated before input validation. Passing zero or negative values leads to an undefined result from ilog2(). Validate that the input is strictly positive prior to computing its logarithm. | ||||
| CVE-2026-98679 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: iio: accel: kxcjk-1013: reject duplicate event disable The IIO core does not filter duplicate writes to the event enable attribute. kxcjk1013_write_event_config() already ignores repeated enable requests, but a repeated disable request still calls kxcjk1013_set_power_state(data, false), dropping a runtime PM reference that was not acquired for this request. This can underflow the runtime PM usage count and trigger a "Runtime PM usage count underflow" warning. Return early when the requested state already matches ev_enable_state. | ||||
| CVE-2026-98700 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: set info->band for 802.3 encap offload frames Unlike the 802.11 TX paths, ieee80211_8023_xmit() does not set info->band from the channel context on non-MLD interfaces. It stays at 0, so ieee80211_get_tx_rates() uses the wrong band for these frames. Set it the same way as ieee80211_build_hdr(): drop the frame if there is no channel context, and leave the band at 0 on MLD interfaces. | ||||
| CVE-2026-98719 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: KVM: SEV: Nullify "have run CPUs" mask pointer when freeing it Nullify have_run_cpus when freeing the mask, particularly in the error path of __sev_guest_init(), so that KVM doesn't have to subtly use sev->active to track whether or not the mask has been freed. As pointed out by Sashiko, blindly freeing the mask in sev_vm_destroy() results in a double-free if the mask is freed if __sev_guest_init() fails. Throw the logic in a helper as nullifying the pointer is frustratingly difficult and weird due to have_run_cpus being a single-entry array when CPUMASK_OFFSTACK=n. Deliberately don't use CPUMASK_VAR_NULL, as it's not directly assignable when the cpumask is on-stack, e.g. requires using a local variable and a memcpy(), which is beyond ridiculous. Furthermore, while clearing the on-stack bitmask is an unnecessary and arguably unwanted side effect, KVM absolutely relies on '0' being the "null" value given that the struct is zero-allocated. Opportunistically add an alloc() helper to pair with free(); there are just enough call sites to make doing so worthwhile. | ||||
| CVE-2026-98723 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: nvmet: copy the hostid into the ctrl before creating PR pc_refs Commit 6202783184bf ("nvmet: Improve nvmet_alloc_ctrl() interface and implementation") added a second uuid_copy() of args->hostid near the end of nvmet_alloc_ctrl(), and commit 7b658153f1b8 ("nvmet: Remove duplicate uuid_copy") removed the original copy that sat before nvmet_ctrl_init_pr() instead of the new one. Since then nvmet_ctrl_init_pr() snapshots ctrl->hostid into the per-controller per-namespace reservation refs while the uuid_copy() from the connect data runs later, after the controller is published. The ctrl is allocated with kzalloc(), so every pc_ref created on this path stores the nil UUID. pc_ref->hostid has a single consumer: nvmet_pr_set_ctrl_to_abort() matches it against the preempted registrant's hostid to kill and drain the victim's in-flight I/O for Preempt and Abort. The match can never hit with the nil UUID, so whenever a namespace with reservations enabled exists before a host connects, which includes every reconnect, Preempt and Abort silently degrades into a plain Preempt: the preempting host sees success while the victim's in-flight I/O is still in the air. Copy the hostid where the rest of the connect data is consumed, before the controller is published and before nvmet_ctrl_init_pr() takes its snapshot. | ||||
| CVE-2026-98726 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: nvme-multipath: fix underflow in ANA log bounds checks The number of ANA groups advertised through Identify Controller sizes the ANA log buffer. The ANA log header and group descriptors independently supply the number of groups and namespace IDs to parse. Both bounds checks subtract an untrusted object size from ana_log_size before comparing the current offset. If the object is larger than the buffer, the size_t subtraction underflows and lets the parser read beyond ana_log_buf. Check the current offset before the first subtraction and compare each object size with the remaining buffer instead. This rejects inconsistent ANA data before dereferencing a truncated group descriptor or walking an oversized namespace ID array. | ||||
| CVE-2026-98727 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: nvme-multipath: set BLK_FEAT_ZONED only after the zone info is known The namespace head is marked zoned at allocation time based only on the command set identifier. If the zone info query reports a zero zone size, the path namespace is registered without zoned limits while the head still advertises the zoned capability with a zone size of zero, and reporting zones or writing to the head then shifts by ilog2(0). Drop the zoned feature from the head allocation and let the head limits refresh stack it in from the path namespace instead. | ||||
| CVE-2026-98766 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: usb: gadget: aspeed-vhub: cancel wake work on device removal wake_work is armed from the gadget .wakeup callback to resume suspended downstream ports, and it is never cancelled in ast_vhub_remove(), so a work item queued before or during removal can run after devm has freed vhub and its ports, a use-after-free. Cancelling the work alone is not sufficient: usb_gadget_wakeup() takes no lock and the unbind path never clears wakeup_en, so a remote-wakeup request in flight on another CPU can re-arm the work after the cancel and before vhub is freed. ast_vhub_del_dev() already clears d->registered under vhub->lock before unregistering the gadget. Refuse the wakeup in ast_vhub_udc_wakeup() once d->registered is clear: the check and the schedule_work() are then atomic against the unbind, so a wakeup that passed before the flag was cleared is drained by the cancel_work_sync() after the del_dev loop, and one that arrives later returns without arming. Also move INIT_WORK() to the top of ast_vhub_probe(), since the probe error path reuses ast_vhub_remove() and would otherwise cancel a never-initialized work item. This issue was found by an in-house static analysis tool. | ||||
| CVE-2026-98779 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: fix ACP MFD device leak on init failure acp_hw_init() registers ACP child devices with mfd_add_devices() before attaching them to the ACP power domain and initializing the hardware. If attaching a child to the power domain fails, or if the ACP reset or clock enable operation times out, the failure path frees only the source cell, resource, and platform-data allocations. The child platform devices already registered by mfd_add_devices() remain registered and are never released. Remove the children from the power domain and unregister the MFD devices on failures that occur after mfd_add_devices() succeeds. Keep mfd_add_devices() failures on the existing cleanup path since the MFD core already rolls back partially registered children itself. The issue was identified by a static analysis tool I developed and confirmed by manual review. (cherry picked from commit 63da68d6a2279ec945581c990c5a59a5ae8b5560) | ||||
| CVE-2026-98790 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: perf: Fix race between perf_event_exit_task() and perf_pending_task() A race condition exists between perf_event_exit_task() and perf_pending_task() during begin_new_exec(). During begin_new_exec(), perf_event_exit_task() may be called, and the PF_EXITING flag is not set on task. So perf_sigtrap() continues to execute and triggers WARN_ON_ONCE(event->ctx->task != current). Since both task exit and exec paths can call perf_event_exit_task() which sets ctx->task to TASK_TOMBSTONE, fix this by explicitly checking if event->ctx->task equals TASK_TOMBSTONE and dropping the redundant PF_EXITING check. | ||||
| CVE-2026-97824 | 1 Microsoft | 28 Windows 10 1607, Windows 10 1809, Windows 10 21h2 and 25 more | 2026-10-18 | 6.5 Medium |
| Out-of-bounds read in DNS Server allows an authorized attacker to disclose information over a network. | ||||