Export limit exceeded: 430455 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.

Search

Search Results (430455 CVEs found)

CVE Vendors Products Updated CVSS v3.1
CVE-2026-77316 1 Flytohub 1 Flyto-core 2026-11-20 7.1 High
Flyto2 Core is an execution kernel for automation and AI-agent workflows. Prior to 2.26.8, validate_url_ssrf() in src/core/utils.py validates one DNS answer and then returns the hostname, while guarded_aiohttp_request(), enforce_outbound_url(), and validate_url_with_env_config() allow the outbound connection to perform an independent second lookup. A caller with control of the hostname's DNS can make validation see a public address and make the connection see an internal address, bypassing the guard across its outbound consumers and exposing readable internal or metadata-service responses. The attack requires low or zero DNS TTL behavior and a successful timing-dependent answer change; static multiple-address answers are checked and do not provide the same bypass. This issue is fixed in version 2.26.8.
CVE-2026-133435 2 Red Hat, Redhat 5 Red Hat Build Of Keycloak 26.4, Build Keycloak, Build Of Keycloak and 2 more 2026-11-20 3.7 Low
A flaw was found in Keycloak. When configured with a database that uses case-insensitive collation, Keycloak resolves realm URLs regardless of letter casing. A remote attacker can exploit this behavior by sending requests with alternate letter casing to bypass upstream reverse proxy access controls that rely on case-sensitive path matching. This issue can expose restricted authentication endpoints intended only for internal access, though Keycloak's internal authentication mechanisms remain intact.
CVE-2026-99606 1 Linux 2 Linux, Linux Kernel 2026-11-20 5.5 Medium
In the Linux kernel, the following vulnerability has been resolved: net/smc: don't spin in smc_rx_recvmsg() while a pipe holds spliced data While bytes spliced off the RMB are still in a pipe, recvmsg() waits for the pipe to release them before it copies the data behind them. The path to that wait skips the timeout and signal checks, and smc_rx_wait() returns at once on RCV_SHUTDOWN. With a signal pending, after SHUT_RD, or once the peer closes or shuts down writing, recvmsg() spins on a CPU until the pipe is drained, and SIGKILL cannot stop it. MSG_DONTWAIT and an expired SO_RCVTIMEO wait there too instead of returning -EAGAIN. Check the timeout and signals before that wait, and end it when the pipe releases the data or the connection is killed, not on RCV_SHUTDOWN. A zero-length read returns 0 without waiting for the pipe; a non-blocking one returns -EAGAIN while poll() still reports the socket readable (splice() can still take those bytes). The wait sets SOCKWQ_ASYNC_WAITDATA like smc_rx_wait(), so a byte arriving behind the pipe raises no SIGIO on a reader already asleep for it, and a full barrier orders its wait queue entry before its read of splice_pending, so no wake is lost.
CVE-2026-99608 1 Linux 2 Linux, Linux Kernel 2026-11-20 N/A
In the Linux kernel, the following vulnerability has been resolved: ALSA: usx2y: Guard the playback copy usx2y_urb_play_prepare() sums the packet lengths of a whole URB, copies that many frames with a single wrap, and sizes each playback packet from the capture packet's actual_length. Three things are unchecked: that the URB fits in the ring buffer, that a packet fits in the playback endpoint's maxpacksize, from which tmpbuf is allocated, and that actual_length is a whole number of frames. The ISO descriptors take the raw actual_length while transfer_buffer_length and the copies take count * stride, so a packet that is not a multiple of the stride makes the descriptors add up to more than the buffer, by up to stride - 1 bytes per packet. Return -EPIPE, as the existing packet-size check does, when the URB is larger than the buffer or a packet is larger than maxpacksize, and size each descriptor from whole frames, so the descriptors add up to transfer_buffer_length and each stays within maxpacksize. The buffer case is prevented by the previous patch and this is the guard for it; the other two depend only on the device. The first case is reachable on the unpatched driver with ordinary packets: on 7.3-rc7, a USB/IP device presenting the US-122 interface layout and sending 48-frame packets, with a 100-frame playback buffer (two 50-frame periods, inside the stock constraints), KASAN reports: BUG: KASAN: out-of-bounds in i_usx2y_urb_complete+0x79b/0x1ac0 Read of size 18446744073709551280 at addr ffff88800e6b02e0 by task vhci_rx/80 With both patches, the same device and a 200-frame playback buffer is refused at hw_params with EINVAL, and a 400-frame buffer plays for 30 s with the position advancing inside the buffer, no KASAN report and neither guard message. The maxpacksize check is not exercised: the emulated device reports the same wMaxPacketSize on both endpoints. The descriptor case is visible with capture packets of 195 bytes at stride 4 (48 frames and 3 bytes): without this change the four descriptors add up to 780 bytes for 768 bytes of data, and USB/IP's completion check refuses the URB ("total length of iso packets 780 not equal to actual length of buffer 768", -EPROTO), after which the driver stops the streams. With this patch every descriptor is 192 bytes, the descriptors add up to the data in every URB for 30 s, the position advances inside the buffer and KASAN reports nothing. The 48-frame playback run above is unchanged.
CVE-2026-99615 1 Linux 2 Linux, Linux Kernel 2026-11-20 N/A
In the Linux kernel, the following vulnerability has been resolved: l2tp: only return sessions of the given tunnel in l2tp_session_get() Commit 5f77c18ea556 ("l2tp: use IDR for all session lookups") made pppol2tp_connect() and the netlink session commands find sessions with l2tp_session_get(), passing the socket of the tunnel they name. L2TPv3 session IDs are unique per network namespace, except that sessions carried over UDP are only unique per UDP socket, the socket of their tunnel. However, l2tp_v3_session_get() only checks the socket when another session has the same session ID. Otherwise it returns the session, whichever tunnel it belongs to. As of now, a session command that names the wrong tunnel acts on a session of another tunnel, and a PPPoL2TP socket for a second L2TPv3 tunnel fails with EEXIST, because it finds session 0 of the first tunnel. The issue can be reproduced with: ip l2tp add tunnel tunnel_id 3 peer_tunnel_id 3 encap udp \ local 127.0.0.1 remote 127.0.0.1 udp_sport 5003 udp_dport 6003 ip l2tp add tunnel tunnel_id 4 peer_tunnel_id 4 encap udp \ local 127.0.0.1 remote 127.0.0.1 udp_sport 5004 udp_dport 6004 ip l2tp add session tunnel_id 3 session_id 7 peer_session_id 7 ip l2tp del session tunnel_id 4 session_id 7 ip l2tp show session Before that commit, the delete fails with "No such device", and session 7 of tunnel 3 is still listed. After that commit, the delete succeeds, and session 7 of tunnel 3 is gone. This patch will make l2tp_session_get() return NULL when the L2TPv3 session it finds does not belong to the given socket. The receive path calls l2tp_v3_session_get() directly and is not changed.
CVE-2026-99666 1 Linux 2 Linux, Linux Kernel 2026-11-20 N/A
In the Linux kernel, the following vulnerability has been resolved: mm/khugepaged: fix PMD table lock leak in try_collapse_pte_mapped_thp() For a private mapping with userfaultfd, try_collapse_pte_mapped_thp() takes the PMD table lock before it maps the page table for the second time. If that (pte_offset_map_rw_nolock) fails, because the page table vanished in the meantime due to concurrent page table reclaim, it leaves through the abort label, where the PMD table lock is unlocked if it differs from PTE table lock. In case the PMD table lock and the PTE table lock match, which is the case without CONFIG_SPLIT_PTE_PTLOCKS after pte_offset_map_rw_nolock() failed, we miss to unlock the PMD table. To fix it, forget the PTE table lock when we unmap+unlock the PTE table. Fix generated by an LLM and sent by Josef Bacik in private. [ david: move the ptl = NULL handling; rewrite description, drop wrong comments ]
CVE-2026-99671 1 Linux 2 Linux, Linux Kernel 2026-11-20 N/A
In the Linux kernel, the following vulnerability has been resolved: can: raw, isotp: copy socket options outside of lock_sock() The CAN_RAW and CAN_ISOTP specific socket options are copied from and to user space while holding lock_sock(). A copy that faults or stalls, e.g. on a userfaultfd or FUSE backed mapping, holds lock_sock() for its whole duration. raw_notify() and isotp_notify() take lock_sock() of a socket that is bound to the vanishing device while holding RTNL. As the CAN_RAW options can also be changed on a bound socket, a stalled copy can block RTNL on an unregistration or namespace change of the bound device. Before "can: protect the receive lists with a per-device lock", raw_setsockopt() even held RTNL itself during the copy. CAN_ISOTP only copies its options for unbound sockets, which isotp_notify() skips without taking lock_sock(). Keep the user space copies out of the locked sections: Check the option name and length and copy the option values, including the CAN_RAW_FILTER filters, to kernel memory before lock_sock(). raw_setsockopt_locked() and isotp_setsockopt_locked() get the copied values directly and drop their now redundant length checks and copies. As a side effect, a failing copy can not leave partially overwritten options behind anymore. In raw_getsockopt() duplicate the filters under lock_sock() and copy them to user space after release_sock(). As the option name and length are now checked before lock_sock(), the order of the checks in isotp_setsockopt() and accordingly the order of the returned error values changes. This is in line with POSIX, which does not define an order in which multiple error conditions are detected and reported. The generic SOL_SOCKET options in sk_setsockopt() are not affected by this patch.
CVE-2026-79655 2 Red Hat, Redhat 9 Enterprise Linux, Enterprise Linux, Enterprise Linux Eus and 6 more 2026-11-20 7.8 High
A flaw was found in sos clean, a utility within the sos package. This vulnerability allows a local attacker to perform arbitrary file creation or overwrite. By crafting a malicious tar archive, an attacker can exploit a path traversal issue during tar extraction, where symlink and hardlink targets are not properly validated. This enables the attacker to write files to arbitrary locations on the system with the privileges of the sos clean process, which often runs as root.
CVE-2026-124769 1 Xone 1 Xonemanager 2026-11-20 N/A
Authorization omission in the 'users' POST operation at '/xmanagercore/api/services/' in XOneManager 3.8.3.0. The API checks project membership but fails to validate the role required to manage users. An authenticated user can view the list of users in the project, including their internal IDs, first names, and last names.
CVE-2026-131751 2026-11-20 5.3 Medium
Missing Authorization vulnerability in Magepeople inc. WpEvently mage-eventpress allows Exploiting Incorrectly Configured Access Control Security Levels.This issue affects WpEvently: from n/a through 5.7.13.
CVE-2026-131766 2026-11-20 5.3 Medium
Missing Authorization vulnerability in LeapWorx Premium Addons for Elementor premium-addons-for-elementor allows Exploiting Incorrectly Configured Access Control Security Levels.This issue affects Premium Addons for Elementor: from n/a through 4.11.119.
CVE-2026-122676 2 Publishpress, Wordpress-extensions 2 Publishpress Authors, Publishpress Authors 2026-11-20 8.5 High
Improper Neutralization of Special Elements used in an SQL Command ('SQL Injection') vulnerability in PublishPress PublishPress Authors publishpress-authors allows Blind SQL Injection.This issue affects PublishPress Authors: from n/a through 4.18.0.
CVE-2026-133521 2 Barassistant, Karlomikus 2 Bar Assistant, Bar-assistant 2026-11-20 5.4 Medium
Bar Assistant 3.0.0 before 6.11.0 contains an authorization bypass vulnerability in BarController::join that allows authenticated users to join bars without a valid invite code. Attackers can send POST requests to /api/bars/join omitting invite_code, matching invite-disabled bars with NULL codes, to read cocktails, ingredients, members, settings and search tokens.
CVE-2026-133519 1 Ffmpeg 1 Ffmpeg 2026-11-20 5.5 Medium
FFmpeg 7.0 through 9.0.2 contains an out-of-bounds read vulnerability in dvdvideo_menu_next_ps_block() in libavformat/dvdvideodec.c when demuxing DVD menu domains. Attackers can craft a DVD image whose last cell sector and NAV next-VOBU pointer bypass the end-of-cell check, overreading pgc->cell_playback and crashing the process.
CVE-2026-133228 2 Red Hat, Redhat 5 Red Hat Build Of Keycloak 26.4, Build Keycloak, Build Of Keycloak and 2 more 2026-11-20 6.8 Medium
A flaw was found in Keycloak. When a client application enforces step-up authentication or multi-factor authentication (MFA) via a minimum authentication level, Keycloak fails to apply this requirement to login sessions initiated through the credential reset endpoint. An attacker who possesses a user's initial credentials (such as a password) can navigate from the reset interface back to the standard login form and authenticate without completing the required second factor. This flaw allows an attacker to obtain valid access tokens and gain unauthorized access to protected services without satisfying mandatory security controls.
CVE-2026-133536 2 Red Hat, Redhat 5 Red Hat Build Of Keycloak 26.4, Build Keycloak, Build Of Keycloak and 2 more 2026-11-20 4.3 Medium
A flaw was found in Keycloak. The OpenID Connect (OIDC) logout endpoint continues to honor post-logout redirect rules for disabled clients rather than rejecting the requests. If a disabled client retains permissive redirect configurations, a remote attacker can exploit this issue by supplying an arbitrary redirection target in a logout request, leading to an open redirect that can be used in phishing attacks.
CVE-2026-133537 2 Red Hat, Redhat 5 Red Hat Build Of Keycloak 26.4, Build Keycloak, Build Of Keycloak and 2 more 2026-11-20 6.8 Medium
A flaw was found in Keycloak. When evaluating access permissions, Keycloak Authorization Services improperly matches resource paths containing wildcard file extensions by evaluating only the file extension suffix and ignoring configured path prefixes. An authenticated remote attacker could exploit this vulnerability by requesting a restricted resource that shares a file extension with a more permissive resource, leading to an authorization bypass and unintended access to protected data.
CVE-2026-133553 2 Red Hat, Redhat 6 Enterprise Linux, Enterprise Linux, Hardened Images and 3 more 2026-11-20 7.8 High
A flaw was found in crun. When copying files onto a tmpfs mounted with tmpcopyup, crun opens the destination a second time by name. A container that shares a writable volume with the container being created can change that path between the two lookups, so crun copies image files onto host files, including files under /proc/sys.
CVE-2026-133487 1 Nodejs 1 Undici 2026-11-20 6.3 Medium
A security flaw has been discovered in nodejs undici up to 7.24.0. This affects the function Object.assign of the file balanced-pool.js of the component BalancedPool. The manipulation results in improperly controlled modification of object prototype attributes. The attack may be launched remotely. The exploit has been released to the public and may be used for attacks. Upgrading to version 7.24.1 is able to mitigate this issue. The patch is identified as 0d7ec33ff37563d3e7c98d11d7bca736f330d156. You should upgrade the affected component.
CVE-2026-99566 1 Linux 2 Linux, Linux Kernel 2026-11-20 N/A
In the Linux kernel, the following vulnerability has been resolved: assoc_array: keep gc's cleanup out of the live tree on allocation failure assoc_array_gc() builds a copy of the tree. Where the copy reaches a shortcut, it allocates the copy of the shortcut with kmalloc_flex(), fills it with memcpy(), links it into the new tree, and only then allocates the copy of the node after it. The memcpy() leaves the new shortcut's next_node pointing at the old tree's node, so if that second allocation fails, the cleanup, assoc_array_destroy_subtree() on the new tree, follows the new shortcut into the old tree, and the BUG_ON() on the old node's back pointer fires. Allocate the node first, and the shortcut once the node exists, freeing the node again if the shortcut cannot be allocated. A copied shortcut is then only linked into the new tree when the copy of its node is there to follow it. Nothing else changes: with no allocation failing, the trees gc builds are the same as before. Found by a userspace test that makes each allocation of each operation fail in turn.