Export limit exceeded: 376479 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (376479 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-68414 | 1 Linux | 1 Linux Kernel | 2026-08-12 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: cfg80211: cancel sched scan results work on unregister cfg80211_sched_scan_results() can queue rdev->sched_scan_res_wk from a driver result notification while a scheduled scan request is present. The work callback recovers the containing cfg80211_registered_device and then locks the wiphy and walks the scheduled-scan request list. wiphy_unregister() already makes the wiphy unreachable and drains rdev work items before cfg80211_dev_free() can release the object, but it does not drain sched_scan_res_wk. A queued or running result work item can therefore cross the unregister/free boundary and access freed rdev state. The buggy scenario involves two paths, with each column showing the order within that path: scheduled-scan result path: unregister/free path: 1. cfg80211_sched_scan_results() 1. interface teardown stops and queues rdev->sched_scan_res_wk. removes the scheduled scan request. 2. cfg80211_wq starts the work 2. wiphy_unregister() drains other item and recovers rdev. rdev work items. 3. The worker locks rdev->wiphy 3. cfg80211_dev_free() destroys and and walks rdev state. frees rdev. Cancel sched_scan_res_wk in wiphy_unregister() alongside the other rdev work items. cancel_work_sync() removes a pending result notification and waits for an already running callback, so cfg80211_dev_free() cannot free rdev while this work item is still active. Validation reproduced this kernel report: BUG: KASAN: use-after-free in cfg80211_sched_scan_results_wk+0x4a6/0x530 Workqueue: cfg80211 cfg80211_sched_scan_results_wk [cfg80211] Read of size 8 Call trace: dump_stack_lvl+0x66/0xa0 print_report+0xce/0x630 cfg80211_sched_scan_results_wk+0x4a6/0x530 srso_alias_return_thunk+0x5/0xfbef5 __virt_addr_valid+0x224/0x430 kasan_report+0xac/0xe0 lockdep_hardirqs_on_prepare+0xea/0x1a0 process_one_work+0x8d0/0x18f0 (kernel/workqueue.c:3212) lock_is_held_type+0x8f/0x100 worker_thread+0x5ad/0xfd0 __kthread_parkme+0xc6/0x200 kthread+0x31e/0x410 trace_hardirqs_on+0x1a/0x170 ret_from_fork+0x576/0x810 __switch_to+0x57e/0xe20 __switch_to_asm+0x33/0x70 ret_from_fork_asm+0x1a/0x30 | ||||
| CVE-2026-68417 | 1 Linux | 1 Linux Kernel | 2026-08-12 | 4.8 Medium |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/siw: publish QP after initialization siw_create_qp() currently calls siw_qp_add() before the queues, CQ pointers, state, completion, and device list entry are ready. A QPN lookup can therefore reach a QP that is still being constructed. Move siw_qp_add() to the end of siw_create_qp(), after QP initialization and before adding the QP to the siw device list. | ||||
| CVE-2026-68421 | 1 Linux | 1 Linux Kernel | 2026-08-12 | 0.0 Low |
| In the Linux kernel, the following vulnerability has been resolved: sched_ext: Don't warn on core-sched forced idle in put_prev_task_scx() put_prev_task_scx() warns when a runnable task drops to a lower sched_class without SCX_OPS_ENQ_LAST, on the assumption that balance_one() would have kept it running. Core scheduling breaks that: a forced-idle SMT sibling reschedules through the core_pick fast path in pick_next_task(), which skips pick_task_scx() and thus balance_one(), so a runnable task can drop to idle with ENQ_LAST unset. Gate the warning on sched_cpu_cookie_match(): a cookie mismatch means core scheduling forced the idle, while a match (or core scheduling off) still catches a genuine missing-ENQ_LAST drop. | ||||
| CVE-2026-63297 | 1 Canonical | 1 Lxd | 2026-08-12 | 9.9 Critical |
| An authorization bypass vulnerability in LXD due to a timing flaw during configuration merging allows an authenticated attacker to bypass target project restrictions during cross-project instance copies. When copying an instance to a target project, LXD performs restriction checks before configuration merging is complete, creating a time-of-check to time-of-use (TOCTOU) condition. An attacker can exploit this flaw to copy instances with disallowed high-privilege configurations into restricted projects, bypassing security controls. | ||||
| CVE-2026-63296 | 1 Canonical | 1 Lxd | 2026-08-12 | 9.9 Critical |
| An authorization bypass vulnerability in LXD allows an authenticated attacker to bypass target project restrictions during instance migration. When migrating an instance to a target project, LXD accepts configuration overrides without validating the new configuration against the target project's enforced restrictions. An attacker can exploit this flaw to move instances with disallowed high-privilege configurations into restricted projects, bypassing security controls. | ||||
| CVE-2026-63295 | 1 Canonical | 1 Lxd | 2026-08-12 | 4.3 Medium |
| An authorization bypass vulnerability in LXD allows an authenticated attacker to bypass project-level container isolation restrictions. When a project is configured with restrictions on container privileges (such as enforcing restricted.containers.privilege=isolated), LXD fails to enforce the requirement if an instance configuration omits the security.idmap.isolated key. An attacker can exploit this flaw by creating or updating an instance without explicitly setting security.idmap.isolated, bypassing the target project's security constraints. | ||||
| CVE-2026-73412 | 1 Ericcornelissen | 1 Shescape | 2026-08-12 | N/A |
| Shescape is a simple shell escape library for JavaScript. Prior to 2.1.14 and 3.0.1, this impacts users of Shescape on Unix systems that explicitly configure shell to Zsh, or true when the default shell is Zsh, using the escape and escapeAll. The Zsh options EXTENDED_GLOB and MAGIC_EQUAL_SUBST exacerbate the problem. In certain case, an attacker can leverage home directory expansion and extended glob syntax to obtain lists of files and directories on the system. Depending on what the command does, this may be used to leak more information. This issue is fixed in versions 2.1.14 and 3.0.1. | ||||
| CVE-2026-13433 | 1 Ibm | 1 I Access Client Solutions | 2026-08-12 | 8.3 High |
| IBM i Access Client Solutions 1.1.2.0 through 1.1.9.13 (ACS) is vulnerable to downloading unverified product code when configured to update from an IBM i. A bad actor could use this vulnerablity to run compromised code on the ACS user's workstation. | ||||
| CVE-2026-7007 | 1 Zephyrproject | 1 Zephyr | 2026-08-12 | 4.6 Medium |
| The Zephyr ext2 file system validates the on-disk superblock in ext2_verify_disk_superblock() (subsys/fs/ext2/ext2_impl.c) before completing a mount. The validator checked the magic number, block size, revision and feature flags, but did not verify that the on-disk fields s_blocks_per_group and s_inodes_per_group are non-zero. Both fields are read directly from the image and are later used as divisors during mount-time initialization. During mount, get_ngroups() divides and modulos s_blocks_count by s_blocks_per_group (reached via ext2_fetch_block_group() from ext2_init_fs()), and get_itable_entry() divides (ino - 1) by s_inodes_per_group when fetching the root inode (both in subsys/fs/ext2/ext2_diskops.c). A superblock with either field set to zero therefore causes an integer division by zero during the mount sequence. An attacker who can present a crafted ext2 image to a device that mounts ext2 — removable media such as an SD card or a USB mass-storage device — can trigger this. On ARMv7-M / ARMv8-M-mainline Cortex-M targets, divide-by-zero trapping is enabled (SCB_CCR_DIV_0_TRP), so the division raises a UsageFault that Zephyr treats as a fatal error, producing a denial of service. The impact is limited to availability; the malformed value is consumed only as a divisor. The fix rejects a zero s_blocks_per_group or s_inodes_per_group in the superblock validator, returning -EINVAL so the mount fails before any block-group or inode I/O occurs. | ||||
| CVE-2026-13105 | 1 Ibm | 1 I Access Client Solutions | 2026-08-12 | 8.8 High |
| IBM i Access Client Solutions 1.1.2.0 through 1.1.9.13 is vulnerable to zip slip path traversal exploit when importing a configuration. | ||||
| CVE-2026-16695 | 1 Ibm | 1 I Access Client Solutions | 2026-08-12 | 7.8 High |
| IBM i Access Client Solutions 1.1.2.0 through 1.1.9.13 could allow a local attacker to execute arbitrary code due to improper neutralization of special elements used in an OS command. | ||||
| CVE-2026-19004 | 2026-08-12 | 8.1 High | ||
| An application using the MongoDB BI Connector ODBC Driver may experience a memory-safety issue when processing output parameters from a stored procedure. Triggering this issue requires connecting to an untrusted or impersonated database server that returns crafted metadata. This may result in process termination, disclosure of process memory, or, under certain conditions, arbitrary code execution. | ||||
| CVE-2026-13171 | 2 Eventin, Wordpress | 2 Eventin, Wordpress | 2026-08-12 | 8.2 High |
| The Eventin WordPress plugin before 4.1.20 does not perform an authorization check on its waiting-list registration handler, allowing unauthenticated users to create WordPress user accounts for arbitrary email addresses and inject order records. | ||||
| CVE-2026-73286 | 1 Rustfs | 1 Rustfs | 2026-08-12 | 8.1 High |
| RustFS is a distributed object storage system built in Rust. Prior to 1.0.0-beta.12, RustFS get_condition_values folds attacker-controlled request headers from HeaderMap into server-derived userid, username, principaltype, groups, versionid, signatureversion, jwt:, and ldap: condition keys, allowing authenticated callers to satisfy identity-based policy conditions. This issue is fixed in version 1.0.0-beta.12. | ||||
| CVE-2026-65017 | 1 Apache | 1 Airflow | 2026-08-12 | N/A |
| Apache Airflow's Config API did not mask team-scoped sensitive configuration values in multi-team deployments. When an administrator has enabled multi-team mode and exposed the Config API, an authenticated Viewer holding only configuration-read access — with no prior access to the secret — could read a team-scoped Celery broker URL, including its embedded credentials, in cleartext, while the equivalent global option was correctly masked. The secrets masker matched only base section and option names and did not normalize team-prefixed sections before the sensitivity check (CWE-200). This is a distinct masker bypass from CVE-2026-48828 and CVE-2026-48892: deployments that upgraded to apache-airflow 3.3.0 to address those issues remain affected by this team-scoped variant. Users are advised to upgrade to apache-airflow 3.3.1 or later, which normalizes team-scoped sections before masking. | ||||
| CVE-2026-73240 | 1 Apache | 1 Allura | 2026-08-12 | N/A |
| Specifically crafted inputs may lead to git argument injection in Apache Allura. This issue affects Apache Allura: before 1.19.1. Users are recommended to upgrade to version 1.19.1, which fixes the issue. | ||||
| CVE-2026-18888 | 2026-08-12 | 6.5 Medium | ||
| The MongoDB BI Connector ODBC Driver converts floating point column values into text without checking that the result fits within the destination buffer. When an application reads a sufficiently large floating point value as text, the driver may write beyond the end of that buffer and corrupt adjacent memory. A user who can store data in a collection read through the BI Connector could use this to crash the application performing the read. | ||||
| CVE-2026-19001 | 2026-08-12 | 9.8 Critical | ||
| The MongoDB BI Connector ODBC Driver may write outside the bounds of a fixed-size buffer when an application supplies an unusually long catalog, schema, or object name to a metadata retrieval function. This may result in memory corruption within the calling application's process, leading to abnormal termination and, under certain conditions, the potential for arbitrary code execution. | ||||
| CVE-2026-19002 | 2026-08-12 | 8.1 High | ||
| A missing bounds check when parsing stored procedure parameter metadata in the MongoDB BI Connector ODBC Driver can result in an out-of-bounds write in the client application process. Triggering this issue requires control over the server the driver connects to, or the ability to respond in its place, in order to return malformed metadata. The resulting memory corruption may cause the client application to terminate abnormally or, under certain conditions, execute unintended code. | ||||
| CVE-2026-73419 | 2026-08-12 | 6.8 Medium | ||
| NextAuth.js provides authentication for Next.js. Prior to@auth/core 0.41.3 and next-auth 4.24.15 and 5.0.0-beta.32, Auth.js stores the OAuth/OIDC anti-CSRF checks state, nonce, and the PKCE verifier in global cookies that are not bound to the provider that created them. On callback, a check value minted during a sign-in started with one provider can satisfy the callback for a different provider because the stored cookie is not verified against the callback provider's identity, including the provider ID, issuer, client ID, or redirect URI. In a multi-provider application that permits account linking while logged in, when one provider's authorization request is observable and a target provider callback can be satisfied without a PKCE verifier, an attacker can lure a victim into starting a legitimate same-origin flow and link the attacker's target-provider account to the victim's Auth.js user. The linked provider grants the attacker persistent sign-in to the victim's account, while cross-site request forgery alone is insufficient. This issue is fixed in @auth/core 0.41.3 and next-auth 4.24.15 and 5.0.0-beta.32. | ||||