Export limit exceeded: 395825 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 395825 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (395825 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-92501 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ext4: drain in-flight DIO before buffered write fallback generic/746 started failing intermittently on ext3 (no-extent inodes). The test triggers 'Page cache invalidation failure on direct I/O' warnings and subsequent fsync returns -EIO. Adding a 50ms delay between ext4_buffered_write_iter() and filemap_write_and_wait_range() in ext4_dio_write_iter() makes the race almost always reproducible. On no-extent inodes, DIO writes to holes cannot use unwritten extents, so ext4_iomap_alloc() leaves m_flags=0 and ext4_map_blocks() returns 0. The iomap layer then returns -ENOTBLK, causing fallback to buffered I/O. The fallback path in ext4_dio_write_iter() calls ext4_buffered_write_iter() which dirties pages, then does flush and invalidate. However, there's an unprotected window between ext4_buffered_write_iter() returning (with inode lock released) and the subsequent flush+invalidate. Concurrent async DIO completions from other threads can run kiocb_invalidate_post_direct_write() during this window. If pages have been re-dirtied, post-invalidation finds dirty pages and triggers the warning, setting -EIO in the error sequence. Consider a file with two 4k extents: [hole][written]. Thread A does DIO to the written extent, while thread B does DIO spanning both: kworker A (4k DIO, allocated block) kworker B (8k DIO, fallback) ----------------------------------- ---------------------------- inode_lock_shared() inode_lock_shared() iomap_dio_rw(): iomap_dio_rw(): kiocb_invalidate_pages -> clean iomap_begin -> -ENOTBLK submit_bio (async) dio->size = 0 inode_unlock_shared() inode_unlock_shared() [bio pending in block layer] /* fallback: lock released */ ext4_buffered_write_iter() inode_lock(exclusive) generic_perform_write() -> dirty pages [0, 8k] inode_unlock(exclusive) /* pages dirty, no lock */ [bio completes] filemap_write_and_wait_range() iomap_dio_complete() -> flush dirty pages kiocb_invalidate_post_direct_write() invalidate_mapping_pages() invalidate_inode_pages2_range() -> finds dirty page! -> dio_warn_stale_pagecache() -> errseq_set(-EIO) This issue can be triggered through normal I/O paths, not just intentionally overlapping DIO writes from userspace. For example, generic/746 uses a loop device where multiple kworkers issue concurrent I/O to the backing file. Additionally, when block_size < folio_size, non-overlapping DIO writes that share a large folio can also trigger the race. Add inode_dio_wait() in ext4_buffered_write_iter() before ext4_write_checks() to drain all in-flight DIO. This ensures that all DIO clears existing pages before submitting IO (via kiocb_invalidate_pages()), all BIO waits for all DIO to complete (via inode_dio_wait()), and ext4_write_checks() observes the inode size after all completed DIO so that ext4_block_zero_eof() does not race with in-flight DIO, thus eliminating the race. | ||||
| CVE-2026-92516 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Fix offset warn check for bpf_res_spin_lock Sashiko pointed out correctly that the case statement for BPF_RES_SPIN_LOCK incorrectly checks offset for BPF_SPIN_LOCK. Fix it by checking res_spin_lock_off instead. | ||||
| CVE-2026-92520 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Zero queue and stack outputs on lock failure Queue and stack pop/peek helpers accept an uninitialized output buffer because the verifier expects the helper to initialize it. The empty-map error path clears the buffer, but a failed lock acquisition returns -EBUSY without writing it. Clear the output before returning -EBUSY so BPF programs cannot observe uninitialized stack contents after a failed helper call. | ||||
| CVE-2026-93044 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Disallow interpreter fallback for arena-related insns Since the interpreter does not support the arena-related insns, interpreter fallback should not be allowed for these insns in core.c::__bpf_prog_select_runtime(). Currently, when the interpreter executes the arena ST/LDX/STX insns, it would hit the BUG_ON() in ___bpf_prog_run() at run time. [ 2.579196] BPF interpreter: unknown opcode a2 (imm: 0x0) [ 2.579998] ------------[ cut here ]------------ [ 2.580652] kernel BUG at kernel/bpf/core.c:2349! [ 2.581314] Oops: invalid opcode: 0000 [#1] SMP PTI Set jit_required as true when arena map is used in the prog to disallow interpreter fallback for arena-related insns. | ||||
| CVE-2026-93051 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: misc: ad525x_dpot: use driver core groups for sysfs files ad_dpot_probe() creates per-RDAC sysfs files manually and then optionally creates the command sysfs group. This leaves probe responsible for rolling back partial sysfs state and makes remove responsible for matching every file that probe created. Move the device attributes into driver core dev_groups for the I2C and SPI drivers and use an is_visible() callback to expose only the attributes supported by the probed device. With this shape, the driver core creates the sysfs files only after probe succeeds and removes them before the remove callback frees the driver data. | ||||
| CVE-2026-93061 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: gpu: host1x: Avoid stack over-read in debug output helpers host1x_debug_output() and host1x_debug_cont() used vsnprintf(), which returns the length the formatted string would have reached with an unbounded buffer. That return value was passed straight to o->fn as the number of bytes to emit. This could cause a read past end of the output buffer if a call to host1x_debug_* produced a string longer than 256 bytes. This only affected the debugfs files as the printk debug sink ignores the number of bytes. In practice, this is very unlikely to occur. Fix by switching to vscnprintf(), which returns the number of bytes actually written. | ||||
| CVE-2026-93065 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: wifi: iwlwifi: fix counter type in iwl_fwrt_dump_error_logs The loop counter 'count' was declared as u8 while num_pc is u32. If firmware advertises more than 255 PC entries the counter wraps back to zero and the loop never terminates potentially causing an infinite loop or reading past the allocated pc_data array. Change the declaration to u32 to match num_pc. | ||||
| CVE-2026-93067 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/bridge: tc358767: clamp the reported AUX read size to the request tc_aux_transfer() clamps an AUX read to the payload limit: size_t size = min_t(size_t, DP_AUX_MAX_PAYLOAD_BYTES - 1, msg->size); After the transfer it replaces size with the byte count the controller reports in AUX_BYTES: if (size) size = FIELD_GET(AUX_BYTES, auxstatus); AUX_BYTES is GENMASK(15, 8), so it can be up to 255. Nothing clamps it back to the request. tc_aux_read_data() reads that many bytes into the 16-byte auxrdata stack buffer, then copies them into the caller buffer. A reported count of 255 makes the read run to 256 bytes and overruns both. The controller should never report more than it was asked to transfer, so this is defense in depth rather than a live hole. The reported count is only lightly trusted, and the check is cheap. Clamp it back to the request, the same way ti-sn65dsi86 does in commit aca58eac52b8 ("drm/bridge: ti-sn65dsi86: Never store more than msg->size bytes in AUX xfer"). | ||||
| CVE-2026-93078 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: cxl/features: Reject Set Features output buffer smaller than the header cxlctl_set_feature() sizes its output buffer from the user's fwctl_rpc.out_len but never checks it is large enough to hold even the fwctl_rpc_cxl_out header. With out_len == 0 , kvzalloc() returns ZERO_SIZE_PTR, which passes the !rpc_out check, the subsequent rpc_out->size = 0 then writes through the poison pointer. Reject requests whose output buffer can't hold the response header, before allocating. The Set Feature reply carries no payload, so the header is all that is required. | ||||
| CVE-2026-93138 | 1 Linux | 1 Linux Kernel | 2026-09-19 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Fix vmlinux BTF prep race in bpf_get_btf_vmlinux bpf_get_btf_vmlinux() lazily parses the vmlinux BTF under the bpf_verifier_lock, but publishes the result through a plain store and re-checks it through a plain lockless load. Nothing orders the stores initializing the struct btf inside btf_parse_vmlinux() against the store publishing the pointer: On a weakly ordered arch, a concurrent first-time caller taking the lockless fast path could in principle observe the pointer before the parsed contents are visible. The mutex_unlock() does not help such a reader given it only synchronizes with a later acquisition of the same lock. Thus, publish the pointer with smp_store_release() and read it on the fast path with smp_load_acquire(). Acquire semantics are needed rather than a dependency-ordered READ_ONCE(): btf_parse_vmlinux() also populates globals outside the returned object (e.g. bpf_ctx_convert.t). An address dependency would only order accesses performed through the pointer and not cover other globals. | ||||
| CVE-2026-93194 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/rockchip: dw_dp: Release core resources Core resources such as the DisplayPort AUX channel get initialized and registered during dw_dp_bind(), but are never unregistered, which may lead to memory leaks and/or use-after-free: [ 224.661371] BUG: KASAN: slab-use-after-free in device_is_dependent+0xe0/0x2b0 [ 224.662015] Read of size 8 at addr ffff00011aee8550 by task modprobe/658 [ 224.662612] [ 224.662752] CPU: 7 UID: 0 PID: 658 Comm: modprobe Not tainted 7.0.0-rc2-next-20260305 #14 PREEMPT [ 224.662759] Hardware name: Radxa ROCK 5B (DT) [ 224.662762] Call trace: [ 224.662764] show_stack+0x20/0x38 (C) [ 224.662772] dump_stack_lvl+0x6c/0x98 [ 224.662777] print_report+0x160/0x4b8 [ 224.662783] kasan_report+0xb4/0xe0 [ 224.662790] __asan_report_load8_noabort+0x20/0x30 [ 224.662796] device_is_dependent+0xe0/0x2b0 [ 224.662802] device_is_dependent+0x108/0x2b0 [ 224.662808] device_link_add+0x1f8/0x10b0 [ 224.662813] devm_of_phy_get_by_index+0x120/0x200 [ 224.662819] dw_dp_bind+0x34c/0xb10 [dw_dp] [ 224.662830] dw_dp_rockchip_bind+0x194/0x250 [rockchipdrm] [ 224.662864] component_bind_all+0x3a8/0x720 [ 224.662869] rockchip_drm_bind+0x120/0x390 [rockchipdrm] [ 224.662899] try_to_bring_up_aggregate_device+0x76c/0x838 [ 224.662904] component_master_add_with_match+0x1f4/0x230 [ 224.662909] rockchip_drm_platform_probe+0x420/0x538 [rockchipdrm] [ 224.662939] platform_probe+0xe8/0x168 [ 224.662945] really_probe+0x340/0x828 [ 224.662950] __driver_probe_device+0x2e0/0x350 [ 224.662954] driver_probe_device+0x80/0x140 [ 224.662959] __driver_attach+0x398/0x460 [ 224.662964] bus_for_each_dev+0xe0/0x198 [ 224.662968] driver_attach+0x50/0x68 [ 224.662972] bus_add_driver+0x2a0/0x4c0 [ 224.662977] driver_register+0x294/0x360 [ 224.662982] __platform_driver_register+0x7c/0x98 [ 224.662987] rockchip_drm_init+0xc4/0xff8 [rockchipdrm] Since a previous commit exported dw_dp_unbind() function in DW DP core library to take care of the necessary cleanup, use this in the component's unbind() callback, as well as in its bind() error path. | ||||
| CVE-2026-61700 | 1 Mariadb | 1 Connector-j | 2026-09-19 | 3.7 Low |
| MariaDB Connector/J is used to connect applications developed in Java to MariaDB and MySQL databases. Prior to 2.7.14, 3.3.5, 3.4.3, and 3.5.9, ClientMessage.readPacket processes a server-initiated LOCAL INFILE protocol packet 0xfb without enforcing allowLocalInfile=false. When an application sends a LOAD DATA LOCAL INFILE COM_QUERY, a rogue or man-in-the-middle server can echo the same filename and cause the connector to transmit that file despite the disabled option. The server cannot redirect the request to an arbitrary path and can receive only the exact file already selected by the application, so exploitation requires an application that actively loads sensitive data over an untrusted connection. This issue is fixed in versions 2.7.14, 3.3.5, 3.4.3, and 3.5.9. | ||||
| CVE-2026-92619 | 2 Wordpress, Wpdevelop | 2 Wordpress, Booking Calendar | 2026-09-19 | 7.2 High |
| The Booking Calendar plugin for WordPress is vulnerable to Privilege Escalation in all versions up to, and including, 11.8.2 via the `wpbc_ajax_option_save` AJAX action. The vulnerability exists because the `handle_ajax_save()` function applies per-option safeguards only to names explicitly registered via `register_option_policy()`, causing `get_option_policy()` to return an empty policy — bypassing all can_save, force_mode, and allowed_keys checks — for any unregistered option name, including core WordPress options, while an attacker-controlled `data_name` parameter passes through `sanitize_key()` and is written directly to `update_option()` without restriction. This makes it possible for authenticated attackers with Editor-level access and above to escalate their privileges to Administrator by writing core WordPress options such as `default_role=administrator` and `users_can_register=1`, then self-registering a new Administrator account. The nonce check does not meaningfully restrict this attack, as both the nonce value and nonce action are attacker-supplied POST parameters, and a valid nonce is trivially obtainable via `admin-ajax.php?action=rest-nonce`. | ||||
| CVE-2026-5090 | 1 Toddr | 1 Template::plugin::html | 2026-09-19 | 6.1 Medium |
| Template::Plugin::HTML versions before 3.103 for Perl allows HTML and JavaScript to be injected. The html_filter function did not escape single quotes. HTML attributes inside of single quotes could be have code injected. For example, the variable "var" in <a id='ref' title='[% var | html %]'> would not be properly escaped. An attacker could insert some limited HTML and JavaScript, for example, var = " ' onclick='while (true) { alert(1) }'" Note that arbitrary HTML and JavaScript would be difficult to inject, because angle brackets, ampersands and double-quotes would still be escaped. | ||||
| CVE-2026-84048 | 1 Joomgalleryfriends.net | 1 Joomgallery Extension For Joomla | 2026-09-19 | N/A |
| Joomla Extension - joomgalleryfriends.net - Unauthenticated arbitrary file upload via the TUS endpoint in JoomGallery < 4.4.2 - The TUS endpoint allows arbitrary file uploads, however neither file name nor file extension are under attacker control. Code execution requires non-standard server configuration. | ||||
| CVE-2026-93986 | 1 Rclone | 1 Rclone | 2026-09-19 | 3.1 Low |
| rclone before 1.75.1 fails to confine names from server and third-party listing responses to the listed directory, allowing path traversal sequences in object names. Attackers can craft special names containing forward slashes and parent directory references to potentially write outside the destination root, though downstream protections in the local backend currently block actual file escape. | ||||
| CVE-2026-93984 | 1 Openpanel | 1 Openpanel | 2026-09-19 | 5.3 Medium |
| OpenPanel tracking API through commit bad75bddc74d12d36cfb843f4531d3b830a8d994 fails to verify client secret cryptographic hash before authorizing revenue events and bot filtering. Attackers with only a public client ID can supply arbitrary dummy secrets to inject forged revenue metrics and bypass bot detection filters. | ||||
| CVE-2026-93981 | 1 Hono | 1 Hono | 2026-09-19 | 4.7 Medium |
| hono before 4.13.7 fails to HTML-escape plain strings rendered by hono/jsx as a child or fallback of Suspense, as a string child of ErrorBoundary alongside an asynchronous sibling, as the single child of a Context.Provider, or as the root value passed to renderToString() or renderToReadableStream() from hono/jsx/dom/server. These paths stringify their input and treat the result as already-escaped markup, so an attacker who controls such a string during server-side rendering can inject arbitrary HTML and execute script under the application's origin. | ||||
| CVE-2026-92622 | 2 Wordpress, Wpchill | 2 Wordpress, Strong Testimonials | 2026-09-19 | 6.4 Medium |
| The Strong Testimonials plugin for WordPress is vulnerable to Stored Cross-Site Scripting via 'lightbox_class' Shortcode Attribute in all versions up to, and including, 3.3.8 due to insufficient input sanitization and output escaping. This makes it possible for authenticated attackers, with contributor-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. Exploitation requires that the targeted testimonial view has at least one published testimonial with a featured image and the lightbox wrapper enabled, as the vulnerable code path is only reached when a thumbnail is rendered. | ||||
| CVE-2026-89881 | 1 Linux | 2 Kernel, Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: media: rtl2832_sdr: use vb2_video_unregister_device() on remove to fix DMA leak rtl2832_sdr_remove() runs on USB disconnect and clears dev->udev to NULL before any pending streaming teardown has run. When user space later closes its file descriptor, vb2 calls rtl2832_sdr_stop_streaming() which in turn calls rtl2832_sdr_free_stream_bufs(). That helper releases each coherent buffer with: usb_free_coherent(dev->udev, dev->buf_size, dev->buf_list[dev->buf_num], dev->dma_addr[dev->buf_num]); usb_free_coherent() returns immediately when its dev argument is NULL, so every DMA stream buffer that was live at disconnect is silently leaked. The URBs allocated in rtl2832_sdr_alloc_urbs() outlive the device for the same reason. The rtl2832_sdr driver uses vb2_fop_release() in its file_operations, so replace video_unregister_device(&dev->vdev) with vb2_video_unregister_device(&dev->vdev) and move it before clearing dev->udev. vb2_video_unregister_device() releases the vb2 queue, which synchronously runs rtl2832_sdr_stop_streaming() if streaming is active, so URBs and coherent DMA stream buffers are freed while dev->udev is still valid. vb2_video_unregister_device() locks vdev->queue->lock (vb_queue_lock) internally, and stop_streaming() locks v4l2_lock, so the previous outer mutex_lock(&dev->vb_queue_lock) / mutex_lock(&dev->v4l2_lock) pair around the unregister sequence would self-deadlock and has been removed. A short v4l2_lock critical section around dev->udev = NULL remains so any ioctl path that still holds the file descriptor sees coherent state. Issue identified by automated review of the INV-003 series at https://sashiko.dev/ | ||||