Export limit exceeded: 410564 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (410564 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-98580 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: nfc: llcp: Fix race condition in accept_queue lifecycle In nfc_llcp_socket_release(), sockets and listener accept queues are walked under the local sockets rwlock and bh_lock_sock(). However, bh_lock_sock() does not synchronise against process-context lock_sock() held by nfc_llcp_accept_dequeue() during accept(). Because socket_release() does not check sock_owned_by_user(), both paths can concurrently unlink and release the same child socket, resulting in use-after-free or a NULL pointer dereference of child->parent in nfc_llcp_accept_unlink(). Fix this synchronisation race by having nfc_llcp_socket_release() use process-context lock_sock() instead of bh_lock_sock(): 1. Pop sockets from the local sockets list under the write lock using nfc_llcp_sock_list_pop() so lock_sock() can be acquired without holding the rwlock. 2. Because lock_sock() can sleep, defer the final release of the nfc_llcp_local structure to a workqueue (release_work). This avoids a sleeping-in-atomic bug when the last local reference is dropped from softirq context. Additionally, hold a single device reference on local from registration until final destruction. 3. In nfc_llcp_local_get(), use kref_get_unless_zero() to prevent resurrecting a local object whose teardown has been scheduled. 4. In llcp_sock_accept(), verify that the listener socket state is still LLCP_LISTEN after waking from schedule_timeout() to prevent hangs if the listener is closed concurrently. 5. When unlinking unaccepted child sockets during listener release, unlink them from local->sockets, call sock_orphan(), and drop their initial sk_alloc creation reference via sock_put(). 6. Make nfc_llcp_accept_unlink() idempotent by guarding parent access with a NULL check. | ||||
| CVE-2026-98583 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: nfc: nfcmrvl: validate helper command length before pull The firmware download receive path removes the NCI data header and reads the helper command before validating the remaining packet length. A short frame can therefore reach the data access before the malformed packet is rejected. Validate the complete helper command length before stripping the NCI data header. | ||||
| CVE-2026-98585 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: eth: fbnic: Avoid rounding zero ring sizes roundup_pow_of_two() is undefined for zero. ethtool permits a zero ring size to reach the driver, where the minimum-size check should reject it. Leave zero unchanged while rounding nonzero ring sizes. The minimum-size check then rejects zero deterministically without changing the established behavior for other values. | ||||
| CVE-2026-98589 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Reject pkt arguments in mutating subprogs The verifier tracks changes in how PTR_TO_PACKET registers' bounds are modified across subprog boundaries. PTR_TO_PACKET registers are actually passed as PTR_TO_MEM, which is assumed valid for the entire call. This is not the case with packet memory, where a pskb_* call may invalidate its memory region. Reject BPF code that passes PTR_TO_PACKET pointers to subprogs that may mutate a packet. We cannot pass the pointer as a true PTR_TO_PACKET because we would also need to somehow pass the PTR_TO_PACKET_META or PTR_TO_PACKET_END to the subprog. Since we cannot avoid representing the pointer in the subprog as PTR_TO_MEM, only permit it if the subprog is guaranteed not to mutate the packet. | ||||
| CVE-2026-98591 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Fix bounds check for skb-backed dynptrs The skb_pointer_if_linear() function checks whether a memory region of length len starting at offset off into the skb is in the linear area, and returns a pointer to the region if so. The check currently subtracts between skb_headlen and offset of the check, and since skb_headlen is unsigned the subtraction can underflow. This causes the bounds check to spuriously pass and generate an arbitrary pointer of the form *(skb->data + off). The only user of this helper is currently skb-backed BPF dynptr code. Returning the wrong pointer leads to the dynptr erroneously being backed with invalid memory. Ensure the subtraction cannot underflow, and fail the check if it would. Use u64 arithmetic to also prevent overflow when calculating (skb_headlen(skb) - off) since off is unsigned. | ||||
| CVE-2026-98592 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net: spacemit: clear TX descriptor on fragment mapping failure emac_tx_mem_map() writes TX_DESC_0_OWN into the ring descriptor for every slot beyond old_head as soon as that slot's memset()'d local copy is committed with "*tx_desc_addr = tx_desc", i.e. before the buffers for that slot have necessarily all been mapped successfully. If emac_tx_map_frag() then fails on a later fragment, the err_free_skb path calls emac_free_tx_buf() to unmap and drop the skb, but leaves the already-written descriptor memory untouched, and tx_ring->head is never advanced past old_head (the "tx_ring->head = head" store is skipped by the goto). So a slot between old_head and the rolled-back head can be left with TX_DESC_0_OWN set and buffer_addr_{1,2} pointing at DMA mappings that emac_free_tx_buf() just tore down, while software considers that slot free again. The next successful emac_tx_mem_map() call only rebuilds old_head itself; if the DMA engine auto-advances into the following descriptor once it finishes old_head's packet, it will fetch that stale, already-unmapped address. emac_tx_clean_desc() already treats emac_free_tx_buf() and clearing the descriptor as a pair when reclaiming completed descriptors; do the same in the mapping failure path. | ||||
| CVE-2026-98593 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: s390/debug: Fix NULL pointer dereference in debug_info_copy() When debug_register_static() fails, it clears areas, active_pages and active_entries but leaves the area bounds unchanged. Copying such an area, either by opening its view file or via debug_dump(), makes debug_info_copy() dereference the NULL pointers. Skip the copy loop when the source has no areas. | ||||
| CVE-2026-85375 | 1 Microsoft | 28 Windows 10 1607, Windows 10 1809, Windows 10 21h2 and 25 more | 2026-10-18 | 7.8 High |
| Use after free in Windows Universal Plug and Play (UPnP) Device Host allows an authorized attacker to elevate privileges locally. | ||||
| CVE-2026-85829 | 1 Microsoft | 28 Windows 10 1607, Windows 10 1809, Windows 10 21h2 and 25 more | 2026-10-18 | 7.8 High |
| Double free in Windows Wired AutoConfig Service allows an authorized attacker to elevate privileges locally. | ||||
| CVE-2026-98488 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net: atl1e: fix soft lockup on out-of-range hw_next_to_clean read Same issue as atl1c (see the first commit in this series, "net: atl1c: fix soft lockup on out-of-range tpd_cons read"): the hardware can report an out-of-range hw_next_to_clean (seen as 0xffff) while the PCIe link/MAC is resetting. An out-of-range value can never be reached and the loop below would spin forever. Treat it as "nothing new to clean" instead. | ||||
| CVE-2026-98490 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net: openvswitch: conntrack: fix helper UAF due to extensions realloc While calling the helpers, a raw pointer to the extensions area is wired into expectations list: -> nf_ct_helper() -> helper->help() -> nf_ct_expect_related_report() -> nf_ct_expect_insert() -> hlist_add_head_rcu(&exp->lnode, &master_help->expectations) In case the connection is not confirmed yet, more extensions can be added afterwards with *_ext_add() calls reallocating the extension space and leaving the now invalid pointer in the expectations list that is later accessed while removing the expectation. Make sure that helpers are called at the end after all the other extensions are already added. Note that the helper rejection now leaves the mark and labels set, but that's not different from how the NAT was handled before or how the mark and the labels were handled on confirmation failure. And there are no atomicity guarantees provided by the API anyway. | ||||
| CVE-2026-98492 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net: macb: fix dma_alloc_coherent() leak on macb_alloc() error paths Fix 3 leaks in macb_alloc() error paths: - Tx buffer allocated but crossing a 4G boundary: Tx leaked. - Rx buffer allocation fails: Tx leaked. - Rx buffer allocated but crossing a 4G boundary: Tx & Rx leaked. This is because our error handling calls macb_free(bp) which in turn frees the buffers stored in bp->queues[0], but nothing has been stored in there. Fix by storing allocated buffers into bp->queues[0] ASAP. | ||||
| CVE-2026-98494 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net: atl1: fix soft lockup on out-of-range cmb_tpd_next_to_clean read Same issue as atl1c (see the first commit in this series, "net: atl1c: fix soft lockup on out-of-range tpd_cons read"): the hardware can report an out-of-range cmb_tpd_next_to_clean (seen as 0xffff) while the PCIe link/MAC is resetting. An out-of-range value can never be reached and the loop below would spin forever. Treat it as "nothing new to clean" instead. | ||||
| CVE-2026-98495 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net: arp: terminate device name before lookup The ARP ioctl copies a user-provided struct arpreq into a stack object. Its arp_dev field may contain IFNAMSIZ bytes without a NUL terminator. Such input is passed to dev_get_by_name_rcu() or __dev_get_by_name(), where strcmp() can read past the end of the stack object when a matching alternative interface name exists. Terminate the field before the lookup to prevent the out-of-bounds read. | ||||
| CVE-2026-98496 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net: airoha: npu: cancel wdt_work after releasing the WDT IRQ airoha_npu_remove() calls cancel_work_sync() on each core's wdt_work, but the watchdog IRQ that queues it is requested with devm_request_irq() and is freed only after .remove() returns. airoha_npu_wdt_handler() can therefore schedule_work() again once the cancel has returned. struct airoha_npu, which contains the work, is devm_kzalloc()'d and is freed in that same unwind, so the late work dereferences freed memory. Register the work with devm_work_autocancel() before devm_request_irq() and drop .remove(). Devres runs in reverse order, so the IRQ is freed before cancel_work_sync(), including when probe fails. A cancel left in .remove() cannot get that order. Initializing the work first also stops a pending watchdog interrupt from queuing an uninitialized work item. Probe currently calls INIT_WORK() only after devm_request_irq(). This issue was identified during our ongoing static-analysis research while reviewing kernel code. | ||||
| CVE-2026-98498 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net/mlx5: Fix rev_entry reference leak in mlx5_tc_ct_shared_counter_get() When the reverse entry is found but its counter is already being released, refcount_inc_not_zero() fails and the reference taken by mlx5_tc_ct_entry_get() is never dropped before falling through to create_counter. Drop it so the reverse entry is not kept alive forever by a shared counter lookup that did not use it. | ||||
| CVE-2026-98540 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: fprobe: Terminate the fgraph_data list when the reservation is not filled fprobe_fgraph_entry() reserves shadow stack space for every fprobe with an exit handler, but only fills it for those whose entry handler returns 0. fgraph_reserve_data() does not clear the area, so fprobe_return() parses the unused tail as headers left over from an earlier call, and an exit handler can run twice or despite its entry handler asking to skip it. Write a zero word after the last entry to terminate the walk. A zeroed slot does not decode to a NULL fprobe on the arches that encode the header into one unsigned long, since arch_decode_fprobe_header_fp() ORs in FPROBE_HEADER_MSB_PATTERN, so make read_fprobe_header() return NULL for a zeroed slot. | ||||
| CVE-2026-98541 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: fou: reject omitted FOU_ATTR_IPPROTO on FOU_ENCAP_DIRECT Commit 7a9bc9e3f423 ("fou: Don't allow 0 for FOU_ATTR_IPPROTO.") added NLA_POLICY_MIN(NLA_U8, 1) to fou_nl_policy[FOU_ATTR_IPPROTO], which rejects an explicitly supplied FOU_ATTR_IPPROTO == 0 attribute with -ERANGE. However, FOU_ATTR_IPPROTO is an optional netlink attribute. When a user sends FOU_CMD_ADD with FOU_ATTR_TYPE set to FOU_ENCAP_DIRECT and omits FOU_ATTR_IPPROTO entirely, nla_policy validation succeeds and parse_nl_config() leaves cfg->protocol as 0 (from memset(cfg, 0, sizeof(*cfg))). fou_create() then creates a FOU_ENCAP_DIRECT socket with fou->protocol == 0. In fou_udp_recv(), returning -fou->protocol to udp_queue_rcv_one_skb() triggers IP protocol resubmission when fou->protocol > 0, whereas returning 0 tells the UDP tunnel layer that the skb was consumed without freeing it. When fou->protocol == 0, every packet received on the socket returns 0 from fou_udp_recv() and leaks the sk_buff. Reject FOU_ENCAP_DIRECT when !cfg->protocol in fou_create() so that creating a direct encapsulation port without FOU_ATTR_IPPROTO fails with -EINVAL while leaving FOU_CMD_DEL and FOU_CMD_GET (which share parse_nl_config()) unaffected. Tested in QEMU against Linux 7.3.0-rc3 by sending a FOU_CMD_ADD Generic Netlink request with FOU_ATTR_PORT = 5555 and FOU_ATTR_TYPE = FOU_ENCAP_DIRECT while omitting FOU_ATTR_IPPROTO. On the unfixed kernel, FOU_CMD_ADD succeeds (err = 0), FOU_CMD_GET reports fou->type = 1 and fou->protocol = 0, and sending 4000 UDP packets to 127.0.0.1:5555 leaks all 4000 sk_buffs (SUnreclaim in /proc/meminfo grows from 41456 kB to 59008 kB, +17552 kB); with this patch applied, FOU_CMD_ADD is rejected with -EINVAL (-22). | ||||
| CVE-2026-98544 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: bna: prevent IOC timer rearm during teardown bna: prevent IOC timer rearm during teardown bnad_pci_remove() and the probe disable_ioceth path call timer_delete_sync() for ioc_timer, sem_timer and hb_timer, but not for iocpf_timer. bnad_iocpf_timeout() then takes bnad->bna_lock after free_netdev() has freed the struct bnad. Deleting iocpf_timer last does not fix this. sem_timer and iocpf_timer rearm each other: bnad_iocpf_sem_timeout() can arm iocpf_timer, and bnad_iocpf_timeout() arms sem_timer from bfa_ioc_hw_sem_get() when the semaphore is busy. timer_delete_sync() only waits out its own callback. bnad_ioceth_disable() can time out and leave that callback live. Shut all four IOC timers down with timer_shutdown_sync() on both paths, so a later mod_timer() is ignored. This issue was identified during our ongoing static-analysis research while reviewing kernel code. | ||||
| CVE-2026-98545 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ata: libata-scsi: bound the ATA passthru sense descriptor writes When an ATA PASS-THROUGH command to an ATAPI device fails, the sense buffer holds the device's REQUEST SENSE reply, and ata_scsi_set_passthru_sense_fields() trusts its additional length byte, sb[7], when adding the ATA Status Return descriptor. A faulty or malicious device can use that to make the kernel read and write past the 96-byte buffer in three ways: - scsi_sense_desc_find() is passed sb[7] + 8 as the buffer length, so its clamp against sb[7] does nothing and the walk runs off the end. - A type-9 descriptor found near the end is filled in unchecked. - A new descriptor at sb[8 + len] needs len + 22 bytes, not len + 14, so len 75..82 writes up to 8 bytes past the end. Reproduced with KASAN under qemu, with the emulated ATAPI REQUEST SENSE reply patched: BUG: KASAN: slab-out-of-bounds in scsi_sense_desc_find+0x1a5/0x210 BUG: KASAN: slab-out-of-bounds in ata_scsi_qc_complete+0x1a15/0x1a50 Both are gone with this patch, and a valid descriptor is still filled in. | ||||