Export limit exceeded: 430194 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (430194 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-126759 | 1 H3c | 1 Icg2000 Unified Communication Gateway | 2026-11-20 | 5.3 Medium |
| A flaw has been found in H3C ICG2000 Unified Communication Gateway 2023. This issue affects some unknown processing of the file /wnm/check.j of the component Web Management Module. Executing a manipulation can lead to missing authentication. The attack may be performed from remote. The exploit has been published and may be used. Upgrading to version R9141PXX is capable of addressing this issue. It is recommended to upgrade the affected component. The vendor confirms: "We have confirmed this issue is a known issue and has been fixed in R9141PXX versions." | ||||
| CVE-2026-99777 | 1 Linux | 1 Linux Kernel | 2026-11-20 | 4.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net/9p/usbg: remove bogus context initialization in alloc_requests alloc_requests() initializes usb9pfs->in_req->context to point at the struct f_usb9pfs instance itself. usb9pfs_queue_tx() later overwrites this with the real struct p9_req_t pointer before every transmit, and usb9pfs_tx_complete() clears it back to NULL after each completion, so in_req->context only ever holds a valid p9_req_t once a request has actually been queued. usb9pfs_clear_tx(), however, can run at any time (mount close, gadget disable) independent of whether a request was ever queued. If it runs before the first usb9pfs_transmit(), it reads the leftover sentinel value, type-confuses the struct f_usb9pfs pointer as a struct p9_req_t, and both writes through it (req->t_err = -ECONNRESET) and hands it to p9_client_cb(), which manipulates req->wq and req->refcount at bogus offsets inside f_usb9pfs. This reliably corrupts memory or panics whenever the transport is torn down before any 9p request has been transmitted, e.g. mounting and immediately unmounting, or a cable disconnect racing the very first request. usb9pfs->out_req->context is set the same way but is never read by this transport (usb9pfs_rx_complete() identifies the instance via ep->driver_data instead), so it serves no purpose either. Both endpoints' ->driver_data are already set to usb9pfs in enable_endpoint(), which is what the completion handlers actually use to recover the f_usb9pfs instance. Just drop the leftover ->context assignments; usb_ep_alloc_request()/alloc_ep_req() already return zeroed requests, so in_req->context correctly starts out NULL. | ||||
| CVE-2026-99770 | 1 Linux | 1 Linux Kernel | 2026-11-20 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/vc4: Publish the output fence outside of job_lock job_lock is taken by the V3D interrupt handler, so nesting an IRQ-unsafe lock under it creates an inversion. drm_syncobj_replace_fence() takes drm_syncobj::lock, which other paths acquire with interrupts enabled. For example, a thread interrupted while holding it blocks the handler on job_lock, and the handler can only make progress once the submit path releases job_lock, which it cannot do while waiting for drm_syncobj::lock. This is reported by lockdep: [ 188.139076] ======================================================== [ 188.139086] WARNING: possible irq lock inversion dependency detected [ 188.139096] 7.3.0-rc3-00067-gc4f3feeaf60f #67 Tainted: G C [ 188.139108] -------------------------------------------------------- [ 188.139116] swapper/0/0 just changed the state of lock: [ 188.139125] ffff0000054f8ff8 (&vc4->job_lock){-...}-{3:3}, at: vc4_irq+0xa8/0x28c [vc4] [ 188.139234] but this lock took another, HARDIRQ-unsafe lock in the past: [ 188.139242] (&syncobj->lock){+.+.}-{3:3} [ 188.139256] and interrupts could create inverse lock ordering between them. [ 188.139267] other info that might help us debug this: [ 188.139275] Possible interrupt unsafe locking scenario: [ 188.139284] CPU0 CPU1 [ 188.139291] ---- ---- [ 188.139299] lock(&syncobj->lock); [ 188.139312] local_irq_disable(); [ 188.139320] lock(&vc4->job_lock); [ 188.139335] lock(&syncobj->lock); [ 188.139350] <Interrupt> [ 188.139358] lock(&vc4->job_lock); [ 188.139372] *** DEADLOCK *** Hand the fence over after job_lock is dropped. The job can complete and drop exec->fence in that window, so take a reference first and publish through the local pointer, as exec may already be gone. | ||||
| CVE-2026-99769 | 1 Linux | 1 Linux Kernel | 2026-11-20 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/vc4: Drop the BO reservations outside of job_lock vc4_queue_submit() calls drm_exec_fini() with job_lock held and interrupts disabled. Besides unlocking the reservations, drm_exec_fini() frees the object array with kvfree(), which asks for preemptible task context or a non-NMI interrupt, and may reach might_sleep() through vfree(). Considering that an array that exceeds a page can take the vmalloc fallback, call drm_exec_fini() once job_lock is dropped. The reservations are then held across the job kick, which is harmless as nothing in the completion path takes a BO reservation. Note that vc4_attach_fences() has to stay inside the critical section, as it walks exec, which the job done worker is free to release as soon as job_lock is dropped. | ||||
| CVE-2026-99760 | 1 Linux | 1 Linux Kernel | 2026-11-20 | 4.3 Medium |
| In the Linux kernel, the following vulnerability has been resolved: batman-adv: tt: ignore ROAM flag of received ADD changes A received TT change (OGM diff or full table response) with the ROAM flag but without DEL is handled by batadv_tt_global_add() like a ROAMING_ADV: * a newly created global entry gets BATADV_TT_CLIENT_ROAM and is therefore excluded from the global CRC. The sender has it in its local CRC and the receiver has to request the full table again * batadv_tt_global_purge_local() removes the local entry of the receiver. The receiver's own client is considered as roamed to the sender and frames for it are rerouted The ROAM flag only has a meaning together with DEL. Drop it on reception to keep it from populating the global table with a temporary ROAMING entry which is not part of the CRC - and therefore causing a CRC mismatch. | ||||
| CVE-2026-99745 | 1 Linux | 1 Linux Kernel | 2026-11-20 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: x86/bugs: Select the BHI mitigation based on the attack vector properly The BHI mitigation selection is inconsistent with the documentation (attack_vector_controls.rst), which lists BHI under both the user->kernel and guest->host attack vectors. bhi_select_mitigation() only enables it when CPU_MITIGATE_GUEST_HOST is set; otherwise it selects BHI_MITIGATION_OFF, even if CPU_MITIGATE_USER_KERNEL is set. As a result, a kernel compiled with KVM disabled gets BHI automatically disabled, since CPU_MITIGATE_GUEST_HOST defaults to off without KVM. This is a bug, given that CPU_MITIGATE_USER_KERNEL still needs it: on affected Intel CPUs these kernels lose BHI_DIS_S or the BHB clearing loop by default. Booting with mitigations=auto,no_guest_host has the same effect. Select BHI_MITIGATION_ON whenever user->kernel is mitigated, and keep BHI_MITIGATION_VMEXIT_ONLY for the guest->host-only case. [ bp: Clarify commit title. ] | ||||
| CVE-2026-99742 | 1 Linux | 1 Linux Kernel | 2026-11-20 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mm/mempolicy: charge shared policy nodes Any local user can bypass memory.max with mbind() on a tmpfs file, and allocate unbounded kernel memory. mbind() sets a NUMA memory policy for a range of a mapping. If the mapping is of a shmem and friends, the kernel also stores the policy on the inode, in a tree with one entry per range of the file. Each mbind() on a single page of a mapping can add one shared policy node (struct sp_node) and one struct mempolicy to that tree. They outlive the mapping and stay around until the inode is destroyed. The tree is not bounded by the file size, so the file can be empty. Memory that user space can allocate must be charged to a memory cgroup. A slab cache does that for all of its objects if it is created with SLAB_ACCOUNT. numa_policy_init() creates the slab caches for both structs without SLAB_ACCOUNT, so they are not charged to any cgroup. Reproduced with mbind() on single pages of an empty tmpfs file, from a cgroup with memory.max=8M: the global OOM killer killed tasks owned by root, and the machine panicked. Fix this by creating both caches with SLAB_ACCOUNT. This change implies that mbind() can now fail when running into memcg limits. Further, the policy_cache also serves task and VMA policies, so they are similarly accounted now. Note that per-file limits are not really helpful, as the user could simply use many files; having limits per user is tricky as well. Fix generated by an LLM and submitted by Chris Mason in private. [ david: smaller description tweaks ] | ||||
| CVE-2026-99741 | 1 Linux | 1 Linux Kernel | 2026-11-20 | 3.3 Low |
| In the Linux kernel, the following vulnerability has been resolved: tmpfs: keep the quota soft limits of an unused id When the last reference to a dquot goes away, shmem_release_dquot() stores its limits in the rb tree of the mount, unless shmem_is_empty_dquot() says that there is nothing worth storing. That function looks at the usage and at the two hard limits only. So if the administrator sets nothing but soft limits for an id that owns no file yet, the entry is thrown away as soon as the dquot that Q_SETQUOTA used is released, and the id never gets to see a limit. To fix it, compare the soft limits as well: an entry can be empty only if both soft limits are zero as well, which is exactly what shmem_acquire_dquot() sets for a new entry. Fix generated by an LLM and sent by Josef Bacik in private. [ david: slightly adjusted description ] | ||||
| CVE-2026-99733 | 1 Linux | 1 Linux Kernel | 2026-11-20 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mm/truncate: look again if a folio left the mapping invalidate_inode_pages2_range() skips a folio which no longer belongs to the mapping by the time it has got the folio lock, on the assumption that somebody else has removed it from the page cache. But the folio may have been replaced, and then there is a new folio with the same data at that index. For most cases, like folio migration, that is impossible. However, collapse_file() only checks the refcount of the old folios, under the i_pages lock, and relies on their folio locks from there on. That works for users which repeat the lookup when they find folio->mapping changed. The following scenario is, however, possible: CPU0 pwrite(O_DIRECT) CPU1 collapse_file() kiocb_invalidate_pages() read the folio (old data), lock it refcount check the write completes copy to new_folio kiocb_invalidate_post_direct_write() find_get_entries() -> old folio xas_store(new_folio) folio->mapping = NULL folio_unlock(folio) folio_lock() folio->mapping != mapping -> continue In that scenario, the collapsed folio with the data from before the write stays in the page cache after the write has returned. This used to be impossible, as khugepaged only collapsed files that nobody had open for writing. Restart the lookup at that index, like shmem_undo_range() does. The same problem seems to exist in truncate_inode_pages_range() as well when truncate_inode_folio() fails, so handle it there as well, but slightly differently: simply check once more through find_get_entries(). | ||||
| CVE-2026-99722 | 1 Linux | 1 Linux Kernel | 2026-11-20 | 6.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: vringh: bound top-level re-entry into indirect tables In __vringh_iov(), the F_INDIRECT branch descends into the indirect table and continues before the descriptor accounting runs. A top-level indirect descriptor is therefore never charged to count. If such a descriptor sets NEXT to point back at itself, returning from the indirect table resumes at the same top-level descriptor, which is again not counted, so the walk never makes forward progress. Because count stays flat and indirect_count is reset to 0 on every return to the top-level table, neither bound in the loop check trips. A guest can spin the vringh worker at 100% CPU inside __vringh_iov(), an uninterruptible host DoS. Move the descriptor accounting above the indirect switch so that a top-level indirect descriptor is charged one top-level traversal step before the walk descends into its table, bringing this re-entry under the existing vrh->vring.num bound. Each top-level descriptor is still charged at most one step and indirect_count still bounds a single table, so legitimate chains (including the multiple-indirect case in tools/virtio/vringh_test.c) stay within vring.num, while a cyclic indirect descriptor is now rejected with -ELOOP. | ||||
| CVE-2026-99681 | 1 Linux | 1 Linux Kernel | 2026-11-20 | 4.1 Medium |
| In the Linux kernel, the following vulnerability has been resolved: blk-mq: fix out-of-bounds read in blk_mq_free_rqs A KASAN slab-out-of-bounds read can occur in blk_mq_free_rqs() when there is a mismatch between the number of hardware queues allocated for the IO scheduler (et->nr_hw_queues) and the number of hardware queues in the block tag set (set->nr_hw_queues). This mismatch can happen if blk_mq_update_nr_hw_queues() fails halfway through (e.g., due to memory pressure during blk_mq_prealloc_tag_set_tags()). In this error path, the elevator is restored with a larger number of hardware queues than the block tag set actually has. When the elevator is later freed, blk_mq_free_sched_tags() iterates up to the new et->nr_hw_queues and calls blk_mq_free_rqs(). In blk_mq_free_rqs(), it attempts to access set->tags[hctx_idx] to get the driver tags. Because set->nr_hw_queues was not updated due to the earlier failure, set->tags still has the old (smaller) size, leading to an out-of-bounds read. BUG: KASAN: slab-out-of-bounds in blk_mq_free_rqs+0xde/0x680 Read of size 8 at addr ffff88818d67fc28 by task syz-executor117/5839 Call Trace: blk_mq_free_rqs+0xde/0x680 blk_mq_free_map_and_rqs+0x40/0xf0 blk_mq_free_sched_tags blk_mq_free_sched_res+0xeb/0x280 elevator_change_done+0x1d2/0x5c0 elevator_change+0x34f/0x480 elv_iosched_store+0x504/0x630 queue_attr_store+0x207/0x2b0 To fix this, explicitly check if hctx_idx < set->nr_hw_queues before accessing set->tags[hctx_idx]. If hctx_idx >= set->nr_hw_queues, the hardware queue doesn't exist in the tag set, meaning there are no driver tags to clear mappings from. In this case, safely set drv_tags to NULL. The subsequent call to blk_mq_clear_rq_mapping() already handles a NULL drv_tags pointer and will safely return. | ||||
| CVE-2026-99662 | 1 Linux | 1 Linux Kernel | 2026-11-20 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: mm/gup: fix out-of-bounds write for nr_pages == 0 in GUP-fast With nr_pages == 0, GUP-fast still enters its page table walk and can write past the caller's page array. The old end <= start check caught empty ranges, but was replaced with an overflow check. Users such as OrangeFS can pass a zero page count derived from a userspace-supplied length. So let's return zero for nr_pages == 0 before starting the walk, just like GUP-slow. Fix generated by an LLM and sent by Chris Mason in private. [ david: simplify description ] | ||||
| CVE-2026-99661 | 1 Linux | 1 Linux Kernel | 2026-11-20 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: mm/gup: check for overflow when converting nr_pages to bytes in GUP-fast The overflow check in gup_fast_fallback() only covers the addition to start. The preceding nr_pages << PAGE_SHIFT can already have truncated the length on 32bit. Users such as RapidIO's rio_dma_transfer() can derive such page counts from a 64-bit userspace length. Let's just check_shl_overflow() to reject any such overflow with -EOVERFLOW early. | ||||
| CVE-2025-62841 | 3 Qnap, Qnap Systems, Qnap Systems Inc. | 3 Hybrid Backup Sync, Hbs 3 Hybrid Backup Sync, Hbs 3 Hybrid Backup Sync | 2026-11-20 | N/A |
| An use of hard-coded cryptographic key vulnerability has been reported to affect Hybrid Backup Sync. If exploited, the vulnerability could allow remote attackers to compromise the security of the system. We have already fixed the vulnerability in the following version: Hybrid Backup Sync 26.4.0.521 and later Hybrid Backup Sync 26.4.1.563 and later | ||||
| CVE-2025-62839 | 3 Qnap, Qnap Systems, Qnap Systems Inc. | 3 Hybrid Backup Sync, Hbs 3 Hybrid Backup Sync, Hbs 3 Hybrid Backup Sync | 2026-11-20 | N/A |
| An use of hard-coded cryptographic key vulnerability has been reported to affect Hybrid Backup Sync. If exploited, the vulnerability could allow remote attackers to compromise the security of the system. We have already fixed the vulnerability in the following version: Hybrid Backup Sync 26.4.0.521 and later Hybrid Backup Sync 26.4.1.563 and later | ||||
| CVE-2026-133491 | 1 Konstanty | 1 Libmodplug | 2026-11-20 | 6.3 Medium |
| A flaw has been found in Konstanty libmodplug up to 0.8.9.1. The affected element is the function abc_add_drum of the file src/load_abc.cpp of the component ABC File Handler. Executing a manipulation can lead to out-of-bounds read. The attack may be performed from remote. Upgrading to version 0.8.9.2 is sufficient to fix this issue. This patch is called 540f0b8ec3d7979e17a8d6a55e31b8a7b734d463. It is recommended to upgrade the affected component. | ||||
| CVE-2026-75542 | 1 Hexpm | 1 Hexpm | 2026-11-20 | N/A |
| Incorrect Authorization vulnerability in the OAuth token endpoint in hexpm hexpm allows an API key holding the repositories permission to read another organization's private packages. When an API key is exchanged for a token through the OAuth client_credentials grant, validate_scopes_against_key/2 in lib/hexpm_web/controllers/api/oauth_controller.ex admits a requested scope whenever the key carries the repositories permission and the scope string begins with repository:. The organization name is never resolved against the principal, and expand_repositories_scope/3 only rewrites the literal repositories scope, so an explicit repository:<name> passes through untouched. Both CDN edges authorize repository access from the token claim without querying the database, so the minted token is read access to that organization's private packages until it expires. This issue affects hex.pm: from 2025-10-18 before 2026-08-24; hexpm/hexpm: from 71829cb6f6559bcceb1ef4e43a2fb8cdd3af654b before bf0fb9d208f0acfabf7a2f7467c8231659e322a8. | ||||
| CVE-2026-75554 | 1 Hexpm | 1 Hexpm | 2026-11-20 | N/A |
| Insufficient Session Expiration vulnerability in the OAuth token refresh grant in hexpm hexpm allows a user removed from an organization to keep reading its private packages. expand_repositories_scope/3 in lib/hexpm/permissions.ex only rewrites the literal repositories scope, so an explicitly granted repository:<org> or docs:<org> scope passes through it untouched. The refresh grant re-derives a new token from the stored granted_scopes, which holds that expanded form, so every refresh reproduces the organization scope without revisiting membership. Because both CDN edges authorize repository access from the token claim without querying the database, an account removed from an organization retains read access for as long as it keeps refreshing, bounded by the 30 day refresh token lifetime rather than the 30 minute access token lifetime. This issue affects hex.pm: from 2025-10-10 before 2026-08-24; hexpm/hexpm: from 650faa03af511e74c1b3b49ec12d35666b6984c4 before 50cffd206490c49c92d7b63c8505949682abedb0. | ||||
| CVE-2026-23940 | 2 Hex, Hexpm | 2 Hexpm, Hexpm | 2026-11-20 | 6.5 Medium |
| Uncontrolled Resource Consumption vulnerability in hexpm hexpm/hexpm allows Excessive Allocation. Publishing an oversized package can cause Hex.pm to run out of memory while extracting the uploaded package tarball. This can terminate the affected application instance and result in a denial of service for package publishing and potentially other package-processing functionality. This issue affects hex.pm: before 2026-03-10; hexpm/hexpm: from 82911daf5f8fb2ab44f298e3ba22b90bc1ae3746 before 495f01607d3eae4aed7ad09b2f54f31ec7a7df01. | ||||
| CVE-2026-86533 | 1 Team-alembic | 2 Ash Authentication, Ash Authentication Phoenix | 2026-11-20 | N/A |
| Insufficient Session Expiration vulnerability in team-alembic AshAuthentication and AshAuthentication Phoenix allows a revoked session to remain fully authenticated. A resource configured with session_identifier :jti and require_token_presence_for_authentication? disabled stores its session value as <jti>:<subject>. The jti is there so that signing out can revoke that one session. Neither reader consults it: AshAuthentication.Plug.Helpers.authenticate_resource_from_session/4 and AshAuthentication.Phoenix.LiveSession.on_mount/4 both split the value with split_identifier/2, discard the jti and pass the bare subject to AshAuthentication.subject_to_user/3, which reloads the record. The token-presence branch of each function does check its token, calling AshAuthentication.TokenResource.Actions.get_token/3 with the jti and the purpose user. Because the revocation record is never read, neither its revoked state nor its expiry constrains the session, so a session captured before sign-out keeps working. This issue affects ash_authentication: from 4.9.1 before 4.15.0 and from 5.0.0-rc.0 before 5.0.0-rc.14; ash_authentication_phoenix: from 2.10.0 before 2.17.4 and from 3.0.0-rc.0 before 3.0.0-rc.11. | ||||