Export limit exceeded: 430459 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.

Search

Search Results (430459 CVEs found)

CVE Vendors Products Updated CVSS v3.1
CVE-2026-99668 1 Linux 2 Linux, Linux Kernel 2026-11-20 5.5 Medium
In the Linux kernel, the following vulnerability has been resolved: mm/huge_memory: fix zapping migration entries for device-private THPs A PMD migration entry can refer to a device-private folio. zap_huge_pmd_folio() checks the folio type instead of the entry type, so it treats such a migration entry as a device-private entry. Installing the migration entry already removed the reverse mapping and dropped the mapping reference. Zapping it must not repeat those operations. Concurrent MADV_DONTNEED during migration back to system memory can trigger this. Check the PMD entry type using pmd_is_device_private_entry(). Fix generated by an LLM and sent by Chris Mason in private. [ david: simplify description ]
CVE-2026-99768 1 Linux 2 Linux, Linux Kernel 2026-11-20 6.5 Medium
In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: reinstate IEEE80211_TX_CTL_AMPDU flag in ieee80211_tx_prep_agg() The commit 592234e941f1 ("wifi: mac80211: Fix iTXQ AMPDU fragmentation handling") changed the way handling of the IEEE80211_TX_CTL_AMPDU flag is done in mac80211, so the only place it is set is in ieee80211_tx_dequeue(). This means that any frames that are sent to the driver via drv_tx() will no longer have the flag set. In particular, this affects packets going through ieee80211_tx_pending(). Evan reported that this can result in the ath9k driver failing to account such packets in its block ack window, eventually overrunning the window and stalling TX. Fix this by reinstating the flag in ieee80211_tx_prep_agg() when inside a valid block ack window. This should be harmless for the TXQ path, and will reinstate the previous behaviour for drivers that use the flag as a signal to track the packet in the window.
CVE-2026-99770 1 Linux 2 Linux, Linux Kernel 2026-11-20 5.5 Medium
In the Linux kernel, the following vulnerability has been resolved: drm/vc4: Publish the output fence outside of job_lock job_lock is taken by the V3D interrupt handler, so nesting an IRQ-unsafe lock under it creates an inversion. drm_syncobj_replace_fence() takes drm_syncobj::lock, which other paths acquire with interrupts enabled. For example, a thread interrupted while holding it blocks the handler on job_lock, and the handler can only make progress once the submit path releases job_lock, which it cannot do while waiting for drm_syncobj::lock. This is reported by lockdep: [ 188.139076] ======================================================== [ 188.139086] WARNING: possible irq lock inversion dependency detected [ 188.139096] 7.3.0-rc3-00067-gc4f3feeaf60f #67 Tainted: G C [ 188.139108] -------------------------------------------------------- [ 188.139116] swapper/0/0 just changed the state of lock: [ 188.139125] ffff0000054f8ff8 (&vc4->job_lock){-...}-{3:3}, at: vc4_irq+0xa8/0x28c [vc4] [ 188.139234] but this lock took another, HARDIRQ-unsafe lock in the past: [ 188.139242] (&syncobj->lock){+.+.}-{3:3} [ 188.139256] and interrupts could create inverse lock ordering between them. [ 188.139267] other info that might help us debug this: [ 188.139275] Possible interrupt unsafe locking scenario: [ 188.139284] CPU0 CPU1 [ 188.139291] ---- ---- [ 188.139299] lock(&syncobj->lock); [ 188.139312] local_irq_disable(); [ 188.139320] lock(&vc4->job_lock); [ 188.139335] lock(&syncobj->lock); [ 188.139350] <Interrupt> [ 188.139358] lock(&vc4->job_lock); [ 188.139372] *** DEADLOCK *** Hand the fence over after job_lock is dropped. The job can complete and drop exec->fence in that window, so take a reference first and publish through the local pointer, as exec may already be gone.
CVE-2026-99771 1 Linux 2 Linux, Linux Kernel 2026-11-20 6.5 Medium
In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: reload TDLS header pointer after skb_linearize() ieee80211_process_tdls_channel_switch() sets tf = skb->data before it calls skb_linearize(), and reads tf->action_code afterwards. ieee80211_rx_h_data() queues TDLS channel switch requests and responses to the interface after pulling only offsetof(struct ieee80211_tdls_data, u) bytes, so the skb can still be non-linear when the interface work handles it. Drivers that build paged RX skbs do this for every frame that does not fit into the skb head, e.g. iwlwifi (mvm), which is also the only mac80211 driver that sets NL80211_FEATURE_TDLS_CHANNEL_SWITCH. If the remaining data does not fit into the tailroom, skb_linearize() moves the data to a new head and frees the old one, and the action code is then read from freed memory. Depending on what that memory holds by then, the frame is handled as before or ends in the WARN_ON_ONCE() of the default case. The frame only has to be a data frame with the TDLS ethertype from an authorized peer, e.g. relayed by the AP from another station in the BSS; the read happens before the sender is checked to be a TDLS peer. Load tf after skb_linearize(), as the request and response handlers already do. Found by static analysis tool CodeQL.
CVE-2026-99774 1 Linux 2 Linux, Linux Kernel 2026-11-20 5.5 Medium
In the Linux kernel, the following vulnerability has been resolved: xfrm: espintcp: reorder operations within espintcp_init_sk When enabled on a socket, espintcp sets the socket callbacks to its own before it has finished setting up its context and published it as icsk_ulp_data. Any one of those callbacks that gets called before will dereference a NULL icsk_ulp_data. Fix this by reording the operations, and add memory barriers to ensure callers will have a struct espintcp_ctx available. Add a few WRITE_ONCE/READ_ONCE too while we're there.
CVE-2026-99777 1 Linux 2 Linux, Linux Kernel 2026-11-20 4.4 Medium
In the Linux kernel, the following vulnerability has been resolved: net/9p/usbg: remove bogus context initialization in alloc_requests alloc_requests() initializes usb9pfs->in_req->context to point at the struct f_usb9pfs instance itself. usb9pfs_queue_tx() later overwrites this with the real struct p9_req_t pointer before every transmit, and usb9pfs_tx_complete() clears it back to NULL after each completion, so in_req->context only ever holds a valid p9_req_t once a request has actually been queued. usb9pfs_clear_tx(), however, can run at any time (mount close, gadget disable) independent of whether a request was ever queued. If it runs before the first usb9pfs_transmit(), it reads the leftover sentinel value, type-confuses the struct f_usb9pfs pointer as a struct p9_req_t, and both writes through it (req->t_err = -ECONNRESET) and hands it to p9_client_cb(), which manipulates req->wq and req->refcount at bogus offsets inside f_usb9pfs. This reliably corrupts memory or panics whenever the transport is torn down before any 9p request has been transmitted, e.g. mounting and immediately unmounting, or a cable disconnect racing the very first request. usb9pfs->out_req->context is set the same way but is never read by this transport (usb9pfs_rx_complete() identifies the instance via ep->driver_data instead), so it serves no purpose either. Both endpoints' ->driver_data are already set to usb9pfs in enable_endpoint(), which is what the completion handlers actually use to recover the f_usb9pfs instance. Just drop the leftover ->context assignments; usb_ep_alloc_request()/alloc_ep_req() already return zeroed requests, so in_req->context correctly starts out NULL.
CVE-2026-131024 2 Apple, Google 2 Iphone Os, Chrome 2026-11-20 8.1 High
Incorrect authorization in iOSWeb in Google Chrome on on iOS prior to 158.0.8127.36 allowed a remote attacker leveraging social engineering to bypass web origin policy via a crafted HTML page. (Chromium security severity: Medium)
CVE-2026-132947 1 Jetbrains 1 Teamcity 2026-11-20 6.1 Medium
In JetBrains TeamCity before 2026.2 reflected XSS in Kubernetes cloud profile namespace and deployment choosers was possible
CVE-2026-133007 3 Gimp, Red Hat, Redhat 4 Gimp, Enterprise Linux, Enterprise Linux and 1 more 2026-11-20 5.5 Medium
A flaw was found in GIMP. Opening a crafted XCF with a truncated uncompressed tile can expose uninitialized main-process stack memory through the imported layer's pixel data, which may include process addresses that weaken ASLR.
CVE-2026-99337 1 Linux 2 Linux, Linux Kernel 2026-11-20 6.5 Medium
In the Linux kernel, the following vulnerability has been resolved: KVM: TDX: Enable Bus Lock VM exit Enable Bus Lock VM exit functionality for TDX guests. Bus Lock VM exit is an existing feature supported by KVM. Userspace can enable Bus Lock VM exit through KVM_BUS_LOCK_DETECTION_EXIT when it's reported as supported. However, KVM reports the support of this CAP just based on the hardware capability but doesn't differentiate between VMX and TDX. This leads to the issue that userspace can enable this cap for TDX guests without getting an error, but the feature is not actually enabled because KVM doesn't call the TDX module API to program the relevant TD VMCS fields. Enable Bus Lock VM exit for TDX guests by programming the BUS_LOCK_DETECTION control in the TD VMCS and by adding the exit handler. Note, there is no enumeration bit for this feature by TDX module because all TDX modules support it and allow to set the TD VMCS as long as the hardware supports the feature.
CVE-2026-99338 1 Linux 2 Linux, Linux Kernel 2026-11-20 6.5 Medium
In the Linux kernel, the following vulnerability has been resolved: KVM: TDX: Enable Notify VM exit Enable Notify VM exit functionality for TDX guests. Notify VM exit is an existing feature supported by KVM. Userspace can enable Notify VM exit through KVM_CAP_X86_NOTIFY_VMEXIT when it's reported as supported. However, KVM reports the support of this CAP just based on the hardware capability but doesn't differentiate between VMX and TDX. This leads to the issue that userspace can enable this cap for TDX guests without getting an error, but the feature is not actually enabled because KVM doesn't call the TDX module API to program the relevant TD VMCS fields. Enable Notify VM exit for TDX guests by: - Invoking TDX module API calls to set NOTIFY_VM_EXITING and Notify Window in TD VMCS. It's done in tdx_vcpu_init() where other TD VMCS bits are set. Since TDX vCPU cannot be reset, it only needs to be configured once when initializing the TDX vCPU. - Adding corresponding exit handler for TDX Notify VM Exit. Notify VM exit can happen when executing the IRET instruction. If the IRET unblocks the NMI blocking state, bit 12 of the exit qualification is set. In this case, the VMM needs to restore the "blocked by NMI" state when it decides to re-enter the guest. For TDX, KVM cannot manage the GUEST_INTERRUPTIBILITY_INFO and it's TDX module's responsibility to handle it. Extract the common part without NMI blocking handling into a helper in common.h so that it can be shared between VMX and TDX. Note, KVM uses "pre-production" terminology for the feature formally called Notify VM-Exit. All public versions of the SDM refer to the feature as Instruction Timeout. This will be remedied in the near future, for now, use KVM's terminology for consistency. Note, #2, there is no enumeration bit for Notify VM exit by TDX module because all TDX modules support it, and allow to set the corresponding TD VMCS fields as long as the hardware supports the feature.
CVE-2026-99339 1 Linux 2 Linux, Linux Kernel 2026-11-20 3.3 Low
In the Linux kernel, the following vulnerability has been resolved: KVM: x86: Zero reserved synic flags when delivering message to avoid stack leak Ensure all reserved flags are zeroed when setting the msg_pending flag as part of SynIC message delivery, as setting only msg_pending can leak seven bits of kernel stack data to the guest. E.g. gcc typically uses a bitwise-OR to set the msg_pending flag, without initializing the on-stack variable. Precisely zero the flags, e.g. as opposed to zeroing the entire structure, to make it somewhat more obvious that the flags *need* to be zeroed. E.g. it would be quite easy to misread the initial read of guest memory and think that zeroing the entire structure is completely superfluous.
CVE-2026-99340 1 Linux 2 Linux, Linux Kernel 2026-11-20 6.5 Medium
In the Linux kernel, the following vulnerability has been resolved: KVM: x86: Take SRCU in kvm_zap_gfn_range() kvm_zap_gfn_range() walks memslots and rmaps and may drop mmu_lock to reschedule. Callers that do not already hold kvm->srcu (or slots_lock) can race with memslot deletion: synchronize_srcu_expedited() does not wait, kvm_free_memslot() frees the old slot and its rmap, and the zap resumes on freed memory. The VFIO noncoherent-DMA path hits this by zapping the entire GPA space without SRCU. KASAN reported: BUG: KASAN: vmalloc-out-of-bounds in slot_rmap_walk_next+0x82/0x1c0 Read of size 8 at addr ffffc900005c1008 Call Trace: slot_rmap_walk_next+0x82/0x1c0 __kvm_rmap_zap_gfn_range+0x17a/0x280 kvm_zap_gfn_range+0x2a6/0x6a0 kvm_vfio_set_attr+0x576/0x770 kvm_device_ioctl+0x1ff/0x3b0 Take SRCU inside kvm_zap_gfn_range() so every caller is covered. Nesting with an existing kvm->srcu critical section is fine; the helper uses a local index. Drop the now-redundant SRCU pair from __kvm_set_or_clear_apicv_inhibit().
CVE-2026-99341 1 Linux 2 Linux, Linux Kernel 2026-11-20 4.7 Medium
In the Linux kernel, the following vulnerability has been resolved: KVM: x86: Request event processing for exception VM-Exits Request event processing whenever kvm_queue_exception_vmexit() queues an exception VM-Exit. Most callers reach the helper through kvm_multiple_exception(), which already sets KVM_REQ_EVENT, but nested asynchronous page faults call it directly. Without another event request, vcpu_enter_guest() skips kvm_check_and_inject_events() and re-enters L2. A subsequent VM-Exit can clear the pending exception while reconstructing vectoring state, losing the synthetic #PF VM-Exit. The APF reason remains PAGE_NOT_PRESENT and a later regular #PF can consume the stale value. Setting KVM_REQ_EVENT in the common helper ensures that L1 receives the queued VM-Exit before KVM re-enters L2.
CVE-2026-99342 1 Linux 2 Linux, Linux Kernel 2026-11-20 6.5 Medium
In the Linux kernel, the following vulnerability has been resolved: KVM: x86/xen: Enforce 4-byte alignment of vcpu_info registration Xen's map_guest_area() enforces that vcpu_info is aligned to sizeof(xen_ulong_t). KVM has no such check, allowing a guest to register vcpu_info at an arbitrary byte alignment. Enforce unconditional 4-byte alignment regardless of the current shinfo mode. This is sufficient because subsequent commits ensure that all locked atomic operations on vcpu_info fields use at most 32-bit accesses. Return -ENXIO on failure, matching Xen's map_guest_area() behaviour for unaligned requests. Originally observed in review of an unrelated patch: https://lore.kernel.org/all/20260604193554.1BA311F00893@smtp.kernel.org/
CVE-2026-99343 1 Linux 2 Linux, Linux Kernel 2026-11-20 4.7 Medium
In the Linux kernel, the following vulnerability has been resolved: KVM: x86/mmu: Bug the VM if KVM attempts to walk more levels than the MMU has Extend the "EFER.LMA && !CR4.PAE" check, which exists largely to guard against KVM configuring a paging32 MMU with more than 2 levels of paging, with a very explicit check for exactly that: that KVM isn't trying to walk more levels of paging than the MMU template provides. I.e. harden KVM against all bugs that would cause KVM to generates accesses beyond the bounds of guest_walker's arrays, regardless of how KVM ended up with the misconfigured MMU. Note, don't use w->cpu_role.base.level directly as the paging64 template only provides two levels of page tables for PAE paging on 32-bit hosts, and handles the third level by manually emulating the PDPTR access.
CVE-2026-99344 1 Linux 2 Linux, Linux Kernel 2026-11-20 6.5 Medium
In the Linux kernel, the following vulnerability has been resolved: KVM: nSVM: Ignore EFER.LMA if EFER.LME=0 when preparing L2 state Force EFER.LMA=0 if EFER.LME=0 when preparing L2 state for VMRUN, i.e. mimic real hardware's behavior of ignoring EFER.LMA if EFER.LME=0. VMRUN unfortunately allows the nonsensical combination, i.e. doesn't fail, but KVM itself has an invariant EFER.LMA can be set et if and only if EFER.LME is set. Breaking that invariant can lead to a variety of issue, particularly in MMU code that keys off EFER.LMA when determining whether to emulate/virtualization 4/5-level paging versus PAE paging.
CVE-2026-99345 1 Linux 2 Linux, Linux Kernel 2026-11-20 6.5 Medium
In the Linux kernel, the following vulnerability has been resolved: KVM: nSVM: Reject KVM_SET_NESTED_STATE if L1 has EFER.LMA=1 && EFER.LME=0 Reject KVM_SET_NESTED_STATE if the incoming L1 host state has what is effectively an impossible EFER combination of LMA=1 but LME=0, i.e. if the state says long mode is active but not enabled. Unlike VMX, SVM doesn't have an explicit consistent check for the illegal combination; presumably hardware simply ignores EFER.LMA if EFER.LME=0. Unfortunately, KVM doesn't ignore EFER.LMA in this case and consumes the illegal state when constructing the shadow MMU for L2. E.g. if userspace also clears CR4.PAE, then kvm_calc_cpu_role() will compute a role with 4 or 5 levels of paging, but shadow_mmu_init_context() will wire up the MMU to use the paging32 template, which maxes out its levels at 2. Note, the "real badness" is effectively the same as what happened with the nVMX bug fixed by commit 112e66017bff ("KVM: nVMX: add missing consistency checks for CR0 and CR4"). Unfortunately, the sanity check added by commit 72e2fb24a0b0 ("KVM: x86/mmu: Bug the VM if a vCPU ends up in long mode without PAE enabled") doesn't work for this case, since L2 state is active at the time of the page fault, but it's L1 that has the bad state.
CVE-2026-99346 1 Linux 2 Linux, Linux Kernel 2026-11-20 7.5 High
In the Linux kernel, the following vulnerability has been resolved: KVM: SVM: Trigger new ASID allocation in both VMCBs on pCPU switch When the pCPU where the VMCB was most recently used is switched, reset the ASID generation in both VMCBs, triggering new ASID allocation for the immediate VMRUN as well as the next VMRUN on the other VMCB. The ASID is shared between vmcb01 and vmcb02, and gets flushed on every nested transition. However, since pCPU tracking is done per VMCB, it is possible for one VMCB to allocate a new ASID when migrated to a new pCPU, and then the other VMCB reuses that ASID on the old pCPU. This can result in the same ASID being used by multiple vCPUs on the old pCPU. Example scenario: - vCPU runs on pCPU A, vmcb01 is active, asid=1. - vCPU migrates to pCPU B, vmcb01 pCPU changes, new asid=2. - Another vCPU runs on pCPU A and allocates asid=2 as well. - vCPU migrates back to pCPU A, and then switches to vmcb02 before it runs again with vmcb01. - No pCPU switch is detected for vmcb02, so VMRUN is done with asid=2. - Two vCPUs end up using asid=2 on the same pCPU. Keep the VMCB dirtying to the active VMCB only. Clean bits are tracked by a pCPU for each VMCB, so do not unnecessarily dirty a VMCB if its pCPU does not change. Additionally, initialize the tracked pCPU for vmcb02 to -1 on nested enablement as hardening, so that a new ASID allocation is always triggered when nested is disabled and re-enabled. No performance regression was noticed when overcommitting L1 vCPUs in L0 (to force rescheduling), pinning L1 <-> L2 vCPUs, and running CPUID in a tight loop bouncing between 2 vCPUs in L2. An alternative (and perhaps more proper) fix would be tracking the ASID per-VMCB instead (e.g. [1]). However, that's a more involved change, and it would result in having different ASIDs for L1 and L2 without actually properly maintaining them. It would probably work because all TLB flushes target the current VMCB, and the other VMCB is always flushed on nested transitions, but the code ends up in an arguably more fragile state. Punt a proper clean fix to an incoming (and overdue) overhaul of SVM's ASID usage [2]. [1] https://lore.kernel.org/lkml/20250205182402.2147495-2-yosry.ahmed@linux.dev [2] https://lore.kernel.org/kvm/20260728003557.1136583-1-yosry@kernel.org
CVE-2026-99347 1 Linux 2 Linux, Linux Kernel 2026-11-20 6.1 Medium
In the Linux kernel, the following vulnerability has been resolved: ALSA: x86: hdmi: fix chmap array missing terminator entry had_build_channel_allocation_map() allocates a single struct snd_pcm_chmap_elem via kzalloc() and stores it as intelhaddata->chmap->chmap. struct snd_pcm_chmap.chmap is expected to be a zero-terminated array (see snd_pcm_std_chmaps[]), but had_register_chmap_ctls() never overrides the TLV callback installed by snd_pcm_add_chmap_ctls(), so the generic pcm_chmap_ctl_tlv() from ALSA core is left in place. pcm_chmap_ctl_tlv() is reachable by any local user via SNDRV_CTL_IOCTL_TLV_READ on the "Playback Channel Map" control and walks the array with "for (map = info->chmap; map->channels; map++)". Since the driver's single element is never terminated, this walks past the allocation. The same pointer is also freed on hot-unplug and rebuilt on hot-plug under intelhaddata->mutex, while the TLV callback runs under card->controls_rwsem without that mutex, so the walk can also race a concurrent free of the array. Fix this by allocating a second, zeroed element so the array is properly terminated, and by dropping the inherited TLV callback entirely at registration time, since the driver never implements one of its own.