Export limit exceeded: 371153 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (371153 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2025-71150 | 1 Linux | 1 Linux Kernel | 2026-07-30 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: Fix refcount leak when invalid session is found on session lookup When a session is found but its state is not SMB2_SESSION_VALID, It indicates that no valid session was found, but it is missing to decrement the reference count acquired by the session lookup, which results in a reference count leak. This patch fixes the issue by explicitly calling ksmbd_user_session_put to release the reference to the session. | ||||
| CVE-2025-71146 | 1 Linux | 1 Linux Kernel | 2026-07-30 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_conncount: fix leaked ct in error paths There are some situations where ct might be leaked as error paths are skipping the refcounted check and return immediately. In order to solve it make sure that the check is always called. | ||||
| CVE-2025-71132 | 1 Linux | 1 Linux Kernel | 2026-07-30 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: smc91x: fix broken irq-context in PREEMPT_RT When smc91x.c is built with PREEMPT_RT, the following splat occurs in FVP_RevC: [ 13.055000] smc91x LNRO0003:00 eth0: link up, 10Mbps, half-duplex, lpa 0x0000 [ 13.062137] BUG: workqueue leaked atomic, lock or RCU: kworker/2:1[106] [ 13.062137] preempt=0x00000000 lock=0->0 RCU=0->1 workfn=mld_ifc_work [ 13.062266] C ** replaying previous printk message ** [ 13.062266] CPU: 2 UID: 0 PID: 106 Comm: kworker/2:1 Not tainted 6.18.0-dirty #179 PREEMPT_{RT,(full)} [ 13.062353] Hardware name: , BIOS [ 13.062382] Workqueue: mld mld_ifc_work [ 13.062469] Call trace: [ 13.062494] show_stack+0x24/0x40 (C) [ 13.062602] __dump_stack+0x28/0x48 [ 13.062710] dump_stack_lvl+0x7c/0xb0 [ 13.062818] dump_stack+0x18/0x34 [ 13.062926] process_scheduled_works+0x294/0x450 [ 13.063043] worker_thread+0x260/0x3d8 [ 13.063124] kthread+0x1c4/0x228 [ 13.063235] ret_from_fork+0x10/0x20 This happens because smc_special_trylock() disables IRQs even on PREEMPT_RT, but smc_special_unlock() does not restore IRQs on PREEMPT_RT. The reason is that smc_special_unlock() calls spin_unlock_irqrestore(), and rcu_read_unlock_bh() in __dev_queue_xmit() cannot invoke rcu_read_unlock() through __local_bh_enable_ip() when current->softirq_disable_cnt becomes zero. To address this issue, replace smc_special_trylock() with spin_trylock_irqsave(). | ||||
| CVE-2025-71131 | 1 Linux | 1 Linux Kernel | 2026-07-30 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: crypto: seqiv - Do not use req->iv after crypto_aead_encrypt As soon as crypto_aead_encrypt is called, the underlying request may be freed by an asynchronous completion. Thus dereferencing req->iv after it returns is invalid. Instead of checking req->iv against info, create a new variable unaligned_info and use it for that purpose instead. | ||||
| CVE-2025-71130 | 1 Linux | 1 Linux Kernel | 2026-07-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/i915/gem: Zero-initialize the eb.vma array in i915_gem_do_execbuffer Initialize the eb.vma array with values of 0 when the eb structure is first set up. In particular, this sets the eb->vma[i].vma pointers to NULL, simplifying cleanup and getting rid of the bug described below. During the execution of eb_lookup_vmas(), the eb->vma array is successively filled up with struct eb_vma objects. This process includes calling eb_add_vma(), which might fail; however, even in the event of failure, eb->vma[i].vma is set for the currently processed buffer. If eb_add_vma() fails, eb_lookup_vmas() returns with an error, which prompts a call to eb_release_vmas() to clean up the mess. Since eb_lookup_vmas() might fail during processing any (possibly not first) buffer, eb_release_vmas() checks whether a buffer's vma is NULL to know at what point did the lookup function fail. In eb_lookup_vmas(), eb->vma[i].vma is set to NULL if either the helper function eb_lookup_vma() or eb_validate_vma() fails. eb->vma[i+1].vma is set to NULL in case i915_gem_object_userptr_submit_init() fails; the current one needs to be cleaned up by eb_release_vmas() at this point, so the next one is set. If eb_add_vma() fails, neither the current nor the next vma is set to NULL, which is a source of a NULL deref bug described in the issue linked in the Closes tag. When entering eb_lookup_vmas(), the vma pointers are set to the slab poison value, instead of NULL. This doesn't matter for the actual lookup, since it gets overwritten anyway, however the eb_release_vmas() function only recognizes NULL as the stopping value, hence the pointers are being set to NULL as they go in case of intermediate failure. This patch changes the approach to filling them all with NULL at the start instead, rather than handling that manually during failure. (cherry picked from commit 08889b706d4f0b8d2352b7ca29c2d8df4d0787cd) | ||||
| CVE-2025-71128 | 1 Linux | 1 Linux Kernel | 2026-07-30 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: erspan: Initialize options_len before referencing options. The struct ip_tunnel_info has a flexible array member named options that is protected by a counted_by(options_len) attribute. The compiler will use this information to enforce runtime bounds checking deployed by FORTIFY_SOURCE string helpers. As laid out in the GCC documentation, the counter must be initialized before the first reference to the flexible array member. After scanning through the files that use struct ip_tunnel_info and also refer to options or options_len, it appears the normal case is to use the ip_tunnel_info_opts_set() helper. Said helper would initialize options_len properly before copying data into options, however in the GRE ERSPAN code a partial update is done, preventing the use of the helper function. Before this change the handling of ERSPAN traffic in GRE tunnels would cause a kernel panic when the kernel is compiled with GCC 15+ and having FORTIFY_SOURCE configured: memcpy: detected buffer overflow: 4 byte write of buffer size 0 Call Trace: <IRQ> __fortify_panic+0xd/0xf erspan_rcv.cold+0x68/0x83 ? ip_route_input_slow+0x816/0x9d0 gre_rcv+0x1b2/0x1c0 gre_rcv+0x8e/0x100 ? raw_v4_input+0x2a0/0x2b0 ip_protocol_deliver_rcu+0x1ea/0x210 ip_local_deliver_finish+0x86/0x110 ip_local_deliver+0x65/0x110 ? ip_rcv_finish_core+0xd6/0x360 ip_rcv+0x186/0x1a0 Reported-at: https://launchpad.net/bugs/2129580 | ||||
| CVE-2025-71127 | 1 Linux | 1 Linux Kernel | 2026-07-30 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: Discard Beacon frames to non-broadcast address Beacon frames are required to be sent to the broadcast address, see IEEE Std 802.11-2020, 11.1.3.1 ("The Address 1 field of the Beacon .. frame shall be set to the broadcast address"). A unicast Beacon frame might be used as a targeted attack to get one of the associated STAs to do something (e.g., using CSA to move it to another channel). As such, it is better have strict filtering for this on the received side and discard all Beacon frames that are sent to an unexpected address. This is even more important for cases where beacon protection is used. The current implementation in mac80211 is correctly discarding unicast Beacon frames if the Protected Frame bit in the Frame Control field is set to 0. However, if that bit is set to 1, the logic used for checking for configured BIGTK(s) does not actually work. If the driver does not have logic for dropping unicast Beacon frames with Protected Frame bit 1, these frames would be accepted in mac80211 processing as valid Beacon frames even though they are not protected. This would allow beacon protection to be bypassed. While the logic for checking beacon protection could be extended to cover this corner case, a more generic check for discard all Beacon frames based on A1=unicast address covers this without needing additional changes. Address all these issues by dropping received Beacon frames if they are sent to a non-broadcast address. | ||||
| CVE-2025-71126 | 1 Linux | 1 Linux Kernel | 2026-07-30 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: mptcp: avoid deadlock on fallback while reinjecting Jakub reported an MPTCP deadlock at fallback time: WARNING: possible recursive locking detected 6.18.0-rc7-virtme #1 Not tainted -------------------------------------------- mptcp_connect/20858 is trying to acquire lock: ff1100001da18b60 (&msk->fallback_lock){+.-.}-{3:3}, at: __mptcp_try_fallback+0xd8/0x280 but task is already holding lock: ff1100001da18b60 (&msk->fallback_lock){+.-.}-{3:3}, at: __mptcp_retrans+0x352/0xaa0 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&msk->fallback_lock); lock(&msk->fallback_lock); *** DEADLOCK *** May be due to missing lock nesting notation 3 locks held by mptcp_connect/20858: #0: ff1100001da18290 (sk_lock-AF_INET){+.+.}-{0:0}, at: mptcp_sendmsg+0x114/0x1bc0 #1: ff1100001db40fd0 (k-sk_lock-AF_INET#2){+.+.}-{0:0}, at: __mptcp_retrans+0x2cb/0xaa0 #2: ff1100001da18b60 (&msk->fallback_lock){+.-.}-{3:3}, at: __mptcp_retrans+0x352/0xaa0 stack backtrace: CPU: 0 UID: 0 PID: 20858 Comm: mptcp_connect Not tainted 6.18.0-rc7-virtme #1 PREEMPT(full) Hardware name: Bochs, BIOS Bochs 01/01/2011 Call Trace: <TASK> dump_stack_lvl+0x6f/0xa0 print_deadlock_bug.cold+0xc0/0xcd validate_chain+0x2ff/0x5f0 __lock_acquire+0x34c/0x740 lock_acquire.part.0+0xbc/0x260 _raw_spin_lock_bh+0x38/0x50 __mptcp_try_fallback+0xd8/0x280 mptcp_sendmsg_frag+0x16c2/0x3050 __mptcp_retrans+0x421/0xaa0 mptcp_release_cb+0x5aa/0xa70 release_sock+0xab/0x1d0 mptcp_sendmsg+0xd5b/0x1bc0 sock_write_iter+0x281/0x4d0 new_sync_write+0x3c5/0x6f0 vfs_write+0x65e/0xbb0 ksys_write+0x17e/0x200 do_syscall_64+0xbb/0xfd0 entry_SYSCALL_64_after_hwframe+0x4b/0x53 RIP: 0033:0x7fa5627cbc5e Code: 4d 89 d8 e8 14 bd 00 00 4c 8b 5d f8 41 8b 93 08 03 00 00 59 5e 48 83 f8 fc 74 11 c9 c3 0f 1f 80 00 00 00 00 48 8b 45 10 0f 05 <c9> c3 83 e2 39 83 fa 08 75 e7 e8 13 ff ff ff 0f 1f 00 f3 0f 1e fa RSP: 002b:00007fff1fe14700 EFLAGS: 00000202 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 0000000000000005 RCX: 00007fa5627cbc5e RDX: 0000000000001f9c RSI: 00007fff1fe16984 RDI: 0000000000000005 RBP: 00007fff1fe14710 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000202 R12: 00007fff1fe16920 R13: 0000000000002000 R14: 0000000000001f9c R15: 0000000000001f9c The packet scheduler could attempt a reinjection after receiving an MP_FAIL and before the infinite map has been transmitted, causing a deadlock since MPTCP needs to do the reinjection atomically from WRT fallback. Address the issue explicitly avoiding the reinjection in the critical scenario. Note that this is the only fallback critical section that could potentially send packets and hit the double-lock. | ||||
| CVE-2025-71120 | 1 Linux | 1 Linux Kernel | 2026-07-30 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: SUNRPC: svcauth_gss: avoid NULL deref on zero length gss_token in gss_read_proxy_verf A zero length gss_token results in pages == 0 and in_token->pages[0] is NULL. The code unconditionally evaluates page_address(in_token->pages[0]) for the initial memcpy, which can dereference NULL even when the copy length is 0. Guard the first memcpy so it only runs when length > 0. | ||||
| CVE-2025-71116 | 1 Linux | 1 Linux Kernel | 2026-07-30 | 9.1 Critical |
| In the Linux kernel, the following vulnerability has been resolved: libceph: make decode_pool() more resilient against corrupted osdmaps If the osdmap is (maliciously) corrupted such that the encoded length of ceph_pg_pool envelope is less than what is expected for a particular encoding version, out-of-bounds reads may ensue because the only bounds check that is there is based on that length value. This patch adds explicit bounds checks for each field that is decoded or skipped. | ||||
| CVE-2025-71112 | 1 Linux | 1 Linux Kernel | 2026-07-30 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net: hns3: add VLAN id validation before using Currently, the VLAN id may be used without validation when receive a VLAN configuration mailbox from VF. The length of vlan_del_fail_bmap is BITS_TO_LONGS(VLAN_N_VID). It may cause out-of-bounds memory access once the VLAN id is bigger than or equal to VLAN_N_VID. Therefore, VLAN id needs to be checked to ensure it is within the range of VLAN_N_VID. | ||||
| CVE-2025-71109 | 1 Linux | 1 Linux Kernel | 2026-07-30 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: MIPS: ftrace: Fix memory corruption when kernel is located beyond 32 bits Since commit e424054000878 ("MIPS: Tracing: Reduce the overhead of dynamic Function Tracer"), the macro UASM_i_LA_mostly has been used, and this macro can generate more than 2 instructions. At the same time, the code in ftrace assumes that no more than 2 instructions can be generated, which is why it stores them in an int[2] array. However, as previously noted, the macro UASM_i_LA_mostly (and now UASM_i_LA) causes a buffer overflow when _mcount is beyond 32 bits. This leads to corruption of the variables located in the __read_mostly section. This corruption was observed because the variable __cpu_primary_thread_mask was corrupted, causing a hang very early during boot. This fix prevents the corruption by avoiding the generation of instructions if they could exceed 2 instructions in length. Fortunately, insn_la_mcount is only used if the instrumented code is located outside the kernel code section, so dynamic ftrace can still be used, albeit in a more limited scope. This is still preferable to corrupting memory and/or crashing the kernel. | ||||
| CVE-2025-71100 | 1 Linux | 1 Linux Kernel | 2026-07-30 | 7.6 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: rtlwifi: 8192cu: fix tid out of range in rtl92cu_tx_fill_desc() TID getting from ieee80211_get_tid() might be out of range of array size of sta_entry->tids[], so check TID is less than MAX_TID_COUNT. Othwerwise, UBSAN warn: UBSAN: array-index-out-of-bounds in drivers/net/wireless/realtek/rtlwifi/rtl8192cu/trx.c:514:30 index 10 is out of range for type 'rtl_tid_data [9]' | ||||
| CVE-2025-71095 | 1 Linux | 1 Linux Kernel | 2026-07-30 | 9.1 Critical |
| In the Linux kernel, the following vulnerability has been resolved: net: stmmac: fix the crash issue for zero copy XDP_TX action There is a crash issue when running zero copy XDP_TX action, the crash log is shown below. [ 216.122464] Unable to handle kernel paging request at virtual address fffeffff80000000 [ 216.187524] Internal error: Oops: 0000000096000144 [#1] SMP [ 216.301694] Call trace: [ 216.304130] dcache_clean_poc+0x20/0x38 (P) [ 216.308308] __dma_sync_single_for_device+0x1bc/0x1e0 [ 216.313351] stmmac_xdp_xmit_xdpf+0x354/0x400 [ 216.317701] __stmmac_xdp_run_prog+0x164/0x368 [ 216.322139] stmmac_napi_poll_rxtx+0xba8/0xf00 [ 216.326576] __napi_poll+0x40/0x218 [ 216.408054] Kernel panic - not syncing: Oops: Fatal exception in interrupt For XDP_TX action, the xdp_buff is converted to xdp_frame by xdp_convert_buff_to_frame(). The memory type of the resulting xdp_frame depends on the memory type of the xdp_buff. For page pool based xdp_buff it produces xdp_frame with memory type MEM_TYPE_PAGE_POOL. For zero copy XSK pool based xdp_buff it produces xdp_frame with memory type MEM_TYPE_PAGE_ORDER0. However, stmmac_xdp_xmit_back() does not check the memory type and always uses the page pool type, this leads to invalid mappings and causes the crash. Therefore, check the xdp_buff memory type in stmmac_xdp_xmit_back() to fix this issue. | ||||
| CVE-2025-71093 | 1 Linux | 1 Linux Kernel | 2026-07-30 | 9.1 Critical |
| In the Linux kernel, the following vulnerability has been resolved: e1000: fix OOB in e1000_tbi_should_accept() In e1000_tbi_should_accept() we read the last byte of the frame via 'data[length - 1]' to evaluate the TBI workaround. If the descriptor- reported length is zero or larger than the actual RX buffer size, this read goes out of bounds and can hit unrelated slab objects. The issue is observed from the NAPI receive path (e1000_clean_rx_irq): ================================================================== BUG: KASAN: slab-out-of-bounds in e1000_tbi_should_accept+0x610/0x790 Read of size 1 at addr ffff888014114e54 by task sshd/363 CPU: 0 PID: 363 Comm: sshd Not tainted 5.18.0-rc1 #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu.org 04/01/2014 Call Trace: <IRQ> dump_stack_lvl+0x5a/0x74 print_address_description+0x7b/0x440 print_report+0x101/0x200 kasan_report+0xc1/0xf0 e1000_tbi_should_accept+0x610/0x790 e1000_clean_rx_irq+0xa8c/0x1110 e1000_clean+0xde2/0x3c10 __napi_poll+0x98/0x380 net_rx_action+0x491/0xa20 __do_softirq+0x2c9/0x61d do_softirq+0xd1/0x120 </IRQ> <TASK> __local_bh_enable_ip+0xfe/0x130 ip_finish_output2+0x7d5/0xb00 __ip_queue_xmit+0xe24/0x1ab0 __tcp_transmit_skb+0x1bcb/0x3340 tcp_write_xmit+0x175d/0x6bd0 __tcp_push_pending_frames+0x7b/0x280 tcp_sendmsg_locked+0x2e4f/0x32d0 tcp_sendmsg+0x24/0x40 sock_write_iter+0x322/0x430 vfs_write+0x56c/0xa60 ksys_write+0xd1/0x190 do_syscall_64+0x43/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7f511b476b10 Code: 73 01 c3 48 8b 0d 88 d3 2b 00 f7 d8 64 89 01 48 83 c8 ff c3 66 0f 1f 44 00 00 83 3d f9 2b 2c 00 00 75 10 b8 01 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 31 c3 48 83 ec 08 e8 8e 9b 01 00 48 89 04 24 RSP: 002b:00007ffc9211d4e8 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 0000000000004024 RCX: 00007f511b476b10 RDX: 0000000000004024 RSI: 0000559a9385962c RDI: 0000000000000003 RBP: 0000559a9383a400 R08: fffffffffffffff0 R09: 0000000000004f00 R10: 0000000000000070 R11: 0000000000000246 R12: 0000000000000000 R13: 00007ffc9211d57f R14: 0000559a9347bde7 R15: 0000000000000003 </TASK> Allocated by task 1: __kasan_krealloc+0x131/0x1c0 krealloc+0x90/0xc0 add_sysfs_param+0xcb/0x8a0 kernel_add_sysfs_param+0x81/0xd4 param_sysfs_builtin+0x138/0x1a6 param_sysfs_init+0x57/0x5b do_one_initcall+0x104/0x250 do_initcall_level+0x102/0x132 do_initcalls+0x46/0x74 kernel_init_freeable+0x28f/0x393 kernel_init+0x14/0x1a0 ret_from_fork+0x22/0x30 The buggy address belongs to the object at ffff888014114000 which belongs to the cache kmalloc-2k of size 2048 The buggy address is located 1620 bytes to the right of 2048-byte region [ffff888014114000, ffff888014114800] The buggy address belongs to the physical page: page:ffffea0000504400 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x14110 head:ffffea0000504400 order:3 compound_mapcount:0 compound_pincount:0 flags: 0x100000000010200(slab|head|node=0|zone=1) raw: 0100000000010200 0000000000000000 dead000000000001 ffff888013442000 raw: 0000000000000000 0000000000080008 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected ================================================================== This happens because the TBI check unconditionally dereferences the last byte without validating the reported length first: u8 last_byte = *(data + length - 1); Fix by rejecting the frame early if the length is zero, or if it exceeds adapter->rx_buffer_len. This preserves the TBI workaround semantics for valid frames and prevents touching memory beyond the RX buffer. | ||||
| CVE-2025-71090 | 1 Linux | 1 Linux Kernel | 2026-07-30 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: nfsd: fix nfsd_file reference leak in nfsd4_add_rdaccess_to_wrdeleg() nfsd4_add_rdaccess_to_wrdeleg() unconditionally overwrites fp->fi_fds[O_RDONLY] with a newly acquired nfsd_file. However, if the client already has a SHARE_ACCESS_READ open from a previous OPEN operation, this action overwrites the existing pointer without releasing its reference, orphaning the previous reference. Additionally, the function originally stored the same nfsd_file pointer in both fp->fi_fds[O_RDONLY] and fp->fi_rdeleg_file with only a single reference. When put_deleg_file() runs, it clears fi_rdeleg_file and calls nfs4_file_put_access() to release the file. However, nfs4_file_put_access() only releases fi_fds[O_RDONLY] when the fi_access[O_RDONLY] counter drops to zero. If another READ open exists on the file, the counter remains elevated and the nfsd_file reference from the delegation is never released. This potentially causes open conflicts on that file. Then, on server shutdown, these leaks cause __nfsd_file_cache_purge() to encounter files with an elevated reference count that cannot be cleaned up, ultimately triggering a BUG() in kmem_cache_destroy() because there are still nfsd_file objects allocated in that cache. | ||||
| CVE-2025-71085 | 1 Linux | 1 Linux Kernel | 2026-07-30 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: ipv6: BUG() in pskb_expand_head() as part of calipso_skbuff_setattr() There exists a kernel oops caused by a BUG_ON(nhead < 0) at net/core/skbuff.c:2232 in pskb_expand_head(). This bug is triggered as part of the calipso_skbuff_setattr() routine when skb_cow() is passed headroom > INT_MAX (i.e. (int)(skb_headroom(skb) + len_delta) < 0). The root cause of the bug is due to an implicit integer cast in __skb_cow(). The check (headroom > skb_headroom(skb)) is meant to ensure that delta = headroom - skb_headroom(skb) is never negative, otherwise we will trigger a BUG_ON in pskb_expand_head(). However, if headroom > INT_MAX and delta <= -NET_SKB_PAD, the check passes, delta becomes negative, and pskb_expand_head() is passed a negative value for nhead. Fix the trigger condition in calipso_skbuff_setattr(). Avoid passing "negative" headroom sizes to skb_cow() within calipso_skbuff_setattr() by only using skb_cow() to grow headroom. PoC: Using `netlabelctl` tool: netlabelctl map del default netlabelctl calipso add pass doi:7 netlabelctl map add default address:0::1/128 protocol:calipso,7 Then run the following PoC: int fd = socket(AF_INET6, SOCK_DGRAM, IPPROTO_UDP); // setup msghdr int cmsg_size = 2; int cmsg_len = 0x60; struct msghdr msg; struct sockaddr_in6 dest_addr; struct cmsghdr * cmsg = (struct cmsghdr *) calloc(1, sizeof(struct cmsghdr) + cmsg_len); msg.msg_name = &dest_addr; msg.msg_namelen = sizeof(dest_addr); msg.msg_iov = NULL; msg.msg_iovlen = 0; msg.msg_control = cmsg; msg.msg_controllen = cmsg_len; msg.msg_flags = 0; // setup sockaddr dest_addr.sin6_family = AF_INET6; dest_addr.sin6_port = htons(31337); dest_addr.sin6_flowinfo = htonl(31337); dest_addr.sin6_addr = in6addr_loopback; dest_addr.sin6_scope_id = 31337; // setup cmsghdr cmsg->cmsg_len = cmsg_len; cmsg->cmsg_level = IPPROTO_IPV6; cmsg->cmsg_type = IPV6_HOPOPTS; char * hop_hdr = (char *)cmsg + sizeof(struct cmsghdr); hop_hdr[1] = 0x9; //set hop size - (0x9 + 1) * 8 = 80 sendmsg(fd, &msg, 0); | ||||
| CVE-2025-71080 | 1 Linux | 1 Linux Kernel | 2026-07-30 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: ipv6: fix a BUG in rt6_get_pcpu_route() under PREEMPT_RT On PREEMPT_RT kernels, after rt6_get_pcpu_route() returns NULL, the current task can be preempted. Another task running on the same CPU may then execute rt6_make_pcpu_route() and successfully install a pcpu_rt entry. When the first task resumes execution, its cmpxchg() in rt6_make_pcpu_route() will fail because rt6i_pcpu is no longer NULL, triggering the BUG_ON(prev). It's easy to reproduce it by adding mdelay() after rt6_get_pcpu_route(). Using preempt_disable/enable is not appropriate here because ip6_rt_pcpu_alloc() may sleep. Fix this by handling the cmpxchg() failure gracefully on PREEMPT_RT: free our allocation and return the existing pcpu_rt installed by another task. The BUG_ON is replaced by WARN_ON_ONCE for non-PREEMPT_RT kernels where such races should not occur. | ||||
| CVE-2025-71074 | 1 Linux | 1 Linux Kernel | 2026-07-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: functionfs: fix the open/removal races ffs_epfile_open() can race with removal, ending up with file->private_data pointing to freed object. There is a total count of opened files on functionfs (both ep0 and dynamic ones) and when it hits zero, dynamic files get removed. Unfortunately, that removal can happen while another thread is in ffs_epfile_open(), but has not incremented the count yet. In that case open will succeed, leaving us with UAF on any subsequent read() or write(). The root cause is that ffs->opened is misused; atomic_dec_and_test() vs. atomic_add_return() is not a good idea, when object remains visible all along. To untangle that * serialize openers on ffs->mutex (both for ep0 and for dynamic files) * have dynamic ones use atomic_inc_not_zero() and fail if we had zero ->opened; in that case the file we are opening is doomed. * have the inodes of dynamic files marked on removal (from the callback of simple_recursive_removal()) - clear ->i_private there. * have open of dynamic ones verify they hadn't been already removed, along with checking that state is FFS_ACTIVE. | ||||
| CVE-2025-71072 | 1 Linux | 1 Linux Kernel | 2026-07-30 | 8.2 High |
| In the Linux kernel, the following vulnerability has been resolved: shmem: fix recovery on rename failures maple_tree insertions can fail if we are seriously short on memory; simple_offset_rename() does not recover well if it runs into that. The same goes for simple_offset_rename_exchange(). Moreover, shmem_whiteout() expects that if it succeeds, the caller will progress to d_move(), i.e. that shmem_rename2() won't fail past the successful call of shmem_whiteout(). Not hard to fix, fortunately - mtree_store() can't fail if the index we are trying to store into is already present in the tree as a singleton. For simple_offset_rename_exchange() that's enough - we just need to be careful about the order of operations. For simple_offset_rename() solution is to preinsert the target into the tree for new_dir; the rest can be done without any potentially failing operations. That preinsertion has to be done in shmem_rename2() rather than in simple_offset_rename() itself - otherwise we'd need to deal with the possibility of failure after successful shmem_whiteout(). | ||||