Export limit exceeded: 377122 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 377122 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (377122 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-68154 | 1 Linux | 1 Linux Kernel | 2026-08-13 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: libceph: reject zero bucket types in crush_decode CRUSH bucket type 0 is reserved for devices. The mapper relies on that invariant and uses type 0 to identify leaf devices. If crush_decode() accepts a bucket with type 0, a malformed CRUSH map can make the mapper treat a negative bucket ID as a device and pass it to is_out(), which then indexes the OSD weight array with a negative value. Reject zero bucket types while decoding the CRUSH map so the invalid state never reaches the mapper. | ||||
| CVE-2026-68153 | 1 Linux | 1 Linux Kernel | 2026-08-13 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: libceph: remove debugfs files before client teardown ceph_destroy_client() tears down the monitor client before removing the per-client debugfs files. A concurrent read of the monmap debugfs file can enter monmap_show() after ceph_monc_stop() has freed monc->monmap, triggering a use-after-free. Remove the debugfs files before stopping the OSD and monitor clients. debugfs_remove() drains active handlers and prevents new accesses, so the debugfs callbacks can no longer race the rest of client teardown. | ||||
| CVE-2026-68152 | 1 Linux | 1 Linux Kernel | 2026-08-13 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: amt: fix use-after-free in AMT delayed works When an AMT device is removed, pending delayed works can still access the freed amt_dev structure, which may result in kernel crashes or memory corruption. amt_dev_stop() cancels req_wq and discovery_wq with cancel_delayed_work_sync(), but these works can be scheduled again from event_wq after the cancellation. This allows delayed works to access the freed amt_dev structure after the netdev has been released. The following is a simple race scenario: CPU0 CPU1 amt_dev_stop() cancel_delayed_work_sync() amt_event_work() mod_delayed_work(req_wq) free netdev req_wq accesses freed amt_dev Use disable_delayed_work_sync() in amt_dev_stop() to prevent req_wq and discovery_wq from being queued again and wait for running work items to complete. The delayed works are disabled after initialization in amt_newlink() and enabled only when the device is successfully opened. This keeps the delayed work lifecycle synchronized with the lifetime of the AMT device. | ||||
| CVE-2026-68149 | 1 Linux | 1 Linux Kernel | 2026-08-13 | 8.4 High |
| In the Linux kernel, the following vulnerability has been resolved: fs: preserve ACL_DONT_CACHE state in forget_cached_acl() The ACL_DONT_CACHE state is meant to be a constant state for the inode for filesystems that want to opt out of posix acl caching. Commit facd61053cff1 ("fuse: fixes after adapting to new posix acl api") used this facility to opt out of posix acl caching for fuse inodes with fuse server that does not negotiate FUSE_POSIX_ACL (fc->posix_acl). The commit also takes care to gate the forget_all_cached_acls() call in fuse_set_acl() on fc->posix_acl because there is no need for it, but there are other placed in fuse code which call forget_all_cached_acls() unconditional to fc->posix_acl and those cause the loss of the ACL_DONT_CACHE state. This is not only a functional bug. Properly timed, a get_acl() from this fuse filesystem can return a stale cached value, as was observed in tests, because set_acl() does not invalidate the unintentional acl cache. We could fix this in fuse, but it actually makes no sense for the vfs helper forget_cached_acl() to invalidate the ACL_DONT_CACHE state, so let it not do that to fix fuse and future users of ACL_DONT_CACHE. | ||||
| CVE-2026-68148 | 1 Linux | 1 Linux Kernel | 2026-08-13 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: fscrypt: Add missing superblock check in find_or_insert_direct_key() The legacy 'fscrypt_direct_keys' table caches master keys that are used by v1 encryption policies that have FSCRYPT_POLICY_FLAG_DIRECT_KEY. It's just a global table for all filesystems (since the keys can be provided by the legacy process-subscribed keyrings mechanism, which makes it difficult to reuse super_block::s_master_keys). The entries in it ('struct fscrypt_direct_key') do contain a super_block pointer, though, for passing to fscrypt_destroy_inline_crypt_key() when the last inode that references the key is evicted. However, when finding the fscrypt_direct_key for an inode, we weren't actually comparing the super_block pointer. As a result, inodes with different super_blocks could point to the same fscrypt_direct_key. That could extend the lifetime of a fscrypt_direct_key beyond the super_block it points to, causing a use-after-free later. Fix this by creating distinct fscrypt_direct_key structs for distinct super_block structs. Note that this problem doesn't exist in the v2 policy equivalent ("per-mode keys"), since the data structures there are per super_block. | ||||
| CVE-2026-68145 | 1 Linux | 1 Linux Kernel | 2026-08-13 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: iomap: fix out-of-bounds bitmap_set() with zero-length range ifs_set_range_dirty() and ifs_set_range_uptodate() compute last_blk as (off + len - 1) >> i_blkbits. When off is 0 and len is 0, the unsigned subtraction underflows to SIZE_MAX, producing a huge last_blk and nr_blks value that causes bitmap_set() to write far beyond the ifs->state allocation. Regarding ifs_set_range_uptodate(), it is temporarily safe because len cannot be passed in as 0. However, for ifs_set_range_dirty() this is reachable from __iomap_write_end(): when copy_folio_from_iter_atomic() returns 0 (e.g. user buffer fault) and the folio is already uptodate, the guard at the top of __iomap_write_end() does not trigger because !folio_test_uptodate() is false, and iomap_set_range_dirty() is called with copied == 0. Add a !len guard to both functions before the computation, so that a zero-length range is a no-op. | ||||
| CVE-2026-68144 | 1 Linux | 1 Linux Kernel | 2026-08-13 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: phonet: pep: fix use-after-free in pep_get_sb() pep_get_sb() doesn't consider that pskb_may_pull() might have relocated the skb data, and continue to access the older pointer, causing UAF. Reproduced under KASAN: BUG: KASAN: slab-use-after-free in pep_get_sb+0x234/0x3b0 Read of size 1 at addr ff11000105510f50 by task repro/157 pep_get_sb+0x234/0x3b0 pipe_handler_do_rcv+0x5f7/0xa10 pep_do_rcv+0x203/0x410 __sk_receive_skb+0x471/0x4a0 phonet_rcv+0x5b3/0x6c0 __netif_receive_skb+0xcc/0x1d0 Refetch the header with skb_header_pointer() after pskb_may_pull(), so the possibly stale pointer is no longer dereferenced. There are better ways to solve this, but, this is the less instrusive one. | ||||
| CVE-2026-68143 | 1 Linux | 1 Linux Kernel | 2026-08-13 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net: slip: serialize receive against buffer reallocation sl_realloc_bufs() replaces rbuff and updates buffsize while holding sl->lock. slip_receive_buf() reads those fields and writes through rbuff without holding the lock. An MTU change can therefore race with receive processing. An MTU shrink can expose the new smaller rbuff with the old larger bound, causing an out-of-bounds write. A receive callback which already loaded the old rbuff can instead continue writing after that buffer has been freed. Serialize receive processing with sl_realloc_bufs() by holding sl->lock while consuming each receive batch. | ||||
| CVE-2026-68142 | 1 Linux | 1 Linux Kernel | 2026-08-13 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: geneve: require CAP_NET_ADMIN in the device netns for changelink A tunnel changelink() operates on at most two netns, dev_net(dev) and the sticky underlay netns geneve->net. They differ once the device is created in or moved to a netns other than the one the request runs in. The rtnl changelink path checks CAP_NET_ADMIN only against dev_net(dev), so a caller privileged there but not in geneve->net can rewrite a geneve device whose underlay lives in geneve->net. geneve_changelink() applies the new configuration against geneve->net: geneve_link_config() and the geneve_quiesce()/geneve_unquiesce() pair reopen the underlay sockets in that netns (geneve_sock_add() uses geneve->net), so the same reasoning as the tunnel changelink series applies here. Gate geneve_changelink() with rtnl_dev_link_net_capable(), at the top of the op before any attribute is parsed, matching ipgre_changelink() and the rest of the "require CAP_NET_ADMIN in the device netns for changelink" series. Found by 0sec automated security-research tooling (https://0sec.ai). | ||||
| CVE-2026-68141 | 1 Linux | 1 Linux Kernel | 2026-08-13 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: net/af_iucv: fix NULL deref in afiucv_hs_callback_syn() afiucv_hs_callback_syn() allocates the child socket with GFP_ATOMIC. If the allocation fails, nsk is NULL. The connection-refused path is entered when the listen state check fails, the accept backlog is full, or nsk is NULL. The code unconditionally calls iucv_sock_kill(nsk) in that path. iucv_sock_kill() does not accept a NULL socket pointer and immediately dereferences sk via sock_flag(sk, SOCK_ZAPPED). When nsk is NULL, calling iucv_sock_kill(nsk) results in a NULL pointer dereference. Only call iucv_sock_kill() when a child socket was successfully allocated. | ||||
| CVE-2026-68140 | 1 Linux | 1 Linux Kernel | 2026-08-13 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net/iucv: fix use-after-free of a severed iucv_path af_iucv queues not-yet-received message notifications on iucv->message_q, each holding a raw pointer to the connection's iucv_path. When the peer severs the connection, iucv_sever_path() frees that path with iucv_path_free() but leaves the notifications queued. A later recvmsg() drains message_q via iucv_process_message_q() and hands the stale path to message_receive() -- a use-after-free of the freed iucv_path. Drop the queued notifications when the path is severed; once the path is gone they can no longer be received. This also frees the notifications leaked when a socket is closed with messages still queued. | ||||
| CVE-2026-68137 | 1 Linux | 1 Linux Kernel | 2026-08-13 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: net/x25: fix use-after-free in x25_kill_by_neigh() x25_kill_by_neigh() walks the global X.25 socket list looking for sockets attached to a terminating neighbour. x25_list_lock protects list membership while the lookup is in progress, but it does not pin a socket's lifetime after the lock is dropped. The function currently drops x25_list_lock before calling lock_sock(s). A concurrent close can run x25_release(), remove the same socket from x25_list, and drop the last socket reference in that window. The neighbour teardown path can then lock or inspect a freed struct sock/struct x25_sock. Take sock_hold(s) while x25_list_lock still proves that the list entry is live, then drop the temporary reference after the socket has been locked, rechecked, and released. Recheck x25_sk(s)->neighbour after lock_sock(), because another path may have disconnected the socket before this path acquired the socket lock. Restart the list walk after each disconnect because the list lock was dropped and the previous iterator state may no longer be valid. A QEMU/KASAN run against origin/master reproduced a slab-use-after-free in x25_kill_by_neigh(). | ||||
| CVE-2026-68136 | 1 Linux | 1 Linux Kernel | 2026-08-13 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: net: gro: fix double aggregation of flush-marked skbs Commit 0ab03f353d36 ("net-gro: Fix GRO flush when receiving a GSO packet.") added a flush check to skb_gro_receive(), but skb_gro_receive_list() lacks the same validation. As a result, packets marked with NAPI_GRO_CB(skb)->flush may still be re-aggregated. This allows already-GRO'd packets with existing frag_list to be re-aggregated into a new GRO session, corrupting the frag_list chain structure. When skb_segment() attempts to unpack these malformed packets, it encounters invalid state and triggers a kernel panic. Scenario (Tethering/Device forwarding): 1. Driver: Generated aggregated packet P1 via LRO with frag_list 2. Dev A: Receives aggregated fraglist packet and flush flag set 3. Dev A: Re-enters GRO, skb_gro_receive_list() is called 4. Missing flush check allows re-aggregation despite flush flag 5. Frag_list chain becomes corrupted (loops or dangling refs) 6. Dev B: TX path calls skb_segment(), crashes on corrupted frag_list Root cause in skb_segment(): The check at line ~4891: if (hsize <= 0 && i >= nfrags && skb_headlen(list_skb) && (skb_headlen(list_skb) == len || sg)) { When frag_list is corrupted by double aggregation, when list_skb is a NULL pointer from skb->next, skb_headlen(list_skb) dereference NULL/corrupted pointers occurs. Call Trace: skb_headlen(NULL skb) skb_segment tcp_gso_segment tcp4_gso_segment inet_gso_segment skb_mac_gso_segment __skb_gso_segment skb_gso_segment validate_xmit_skb validate_xmit_skb_list sch_direct_xmit qdisc_restart __qdisc_run qdisc_run net_tx_action Fix: Add NAPI_GRO_CB(skb)->flush validation to the early-return check in skb_gro_receive_list(), matching the defensive programming pattern of skb_gro_receive(). | ||||
| CVE-2026-68134 | 1 Linux | 1 Linux Kernel | 2026-08-13 | 7.3 High |
| In the Linux kernel, the following vulnerability has been resolved: ptp: ptp_s390: Add missing facility check Only register the physical clock when facility 28 is installed and PTFF QAF returns that PTFF QPT is available. | ||||
| CVE-2026-68128 | 1 Linux | 1 Linux Kernel | 2026-08-13 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ice: reject out-of-range ptype in ice_parser_profile_init set_bit(rslt->ptype, prof->ptypes) operates on a DECLARE_BITMAP of ICE_FLOW_PTYPE_MAX (1024) bits. Nothing prevents a malicious VF from providing ptype >= 1024 through VIRTCHNL, resulting in a write past the end of the bitmap and a kernel page fault. Reproduced with a custom kernel module injecting a crafted VIRTCHNL_OP_ADD_RSS_CFG on E810-C QSFP (8086:1592), FW 4.91 0x800214af 1.3909.0, ICE COMMS DDP 1.3.53.0, kernel 7.1.0-rc1. crash_parser: ice_parser_profile_init @ ffffffffc0d61b60 crash_parser: setting ptype=0xffff (max valid=1023) crash_parser: calling ice_parser_profile_init -- expect OOB crash! BUG: kernel NULL pointer dereference, address: 0000000000000000 Oops: Oops: 0002 [#1] SMP NOPTI CPU: 56 UID: 0 PID: 165011 Comm: insmod Kdump: loaded Tainted: G S U OE 7.1.0-rc1 #1 Hardware name: Intel Corporation S2600BPB/S2600BPB RIP: 0010:ice_parser_profile_init+0x2d/0x1d0 [ice] Call Trace: <TASK> ? __pfx_ice_parser_profile_init+0x10/0x10 [ice] crash_init+0x127/0xff0 [crash_parser] do_one_initcall+0x45/0x310 do_init_module+0x64/0x270 init_module_from_file+0xcc/0xf0 idempotent_init_module+0x17b/0x280 __x64_sys_finit_module+0x6e/0xe0 Bail out early with -EINVAL when ptype is out of range. | ||||
| CVE-2026-68127 | 1 Linux | 1 Linux Kernel | 2026-08-13 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: ila: reload IPv6 header after pskb_may_pull in checksum adjust ila_csum_adjust_transport() caches ip6h = ipv6_hdr(skb) before calling pskb_may_pull(). On a non-linear skb whose transport header sits in a page fragment, pskb_may_pull() can call __pskb_pull_tail() / pskb_expand_head() and free the old skb head, leaving ip6h dangling; the following get_csum_diff(ip6h, p) then reads freed memory. ila_update_ipv6_locator() uses ip6h (and the iaddr derived from it) again after the csum-adjust call and additionally writes the new locator through that pointer. Impact: a remote IPv6 packet routed through a configured ILA csum-adjust-transport route or receive-side mapping triggers a slab-use-after-free in ila_update_ipv6_locator() (KASAN). The route or mapping requires CAP_NET_ADMIN to configure, but trigger packets are unauthenticated once it exists. Reload ip6h after each pskb_may_pull() in ila_csum_adjust_transport() before the csum-diff read. In ila_update_ipv6_locator() only the ILA_CSUM_ADJUST_TRANSPORT case pulls the skb, so reload ip6h and iaddr in that case alone before the destination-address write; the neutral-map modes never pull and keep their cached pointers. | ||||
| CVE-2026-68121 | 1 Linux | 1 Linux Kernel | 2026-08-13 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: pppoe: reload header pointer after dev_hard_header() pppoe_sendmsg() saves a pointer to the PPPoE header before calling dev_hard_header(). Device header callbacks are allowed to reallocate the skb head, invalidating pointers into it. This can happen when a send is blocked in copy_from_user() while the first non-Ethernet port is added to an empty team device. The team's delegated GRE header callback then expands the skb head. PPPoE subsequently writes six bytes through the stale pointer into the freed head. Reload the PPPoE header through the skb's network-header offset after device header creation. pskb_expand_head() updates that offset when it relocates the head. | ||||
| CVE-2026-68120 | 1 Linux | 1 Linux Kernel | 2026-08-13 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: rtase: Workaround for TX hang caused by hardware packet parsing The hardware performs packet parsing before packet transmission. Parsing incomplete IPv4, IPv6, TCP, or UDP headers may trigger a TX hang because the hardware parser expects additional protocol header data that is not present in the packet. The hardware performs additional PTP parsing on UDP packets identified by destination ports 319/320 at the expected UDP destination port offset. If such a packet has transport data smaller than RTASE_MIN_PAD_LEN, the hardware parser expects additional packet data and may trigger a TX hang. To avoid these hardware issues, the driver applies the following workarounds. Drop malformed packets that may trigger this hardware issue before transmission. For IPv4 non-initial fragments, the hardware does not check the fragment offset before parsing the expected transport header location. As a result, these packets are still subject to transport header parsing even though they do not contain a transport header. If the transport data is shorter than the minimum transport header required by the hardware parser, pad the transport data to the minimum transport header length required by the hardware parser. Packets that also match the hardware PTP parsing conditions continue to follow the corresponding workaround. For IPv6 fragmented packets, neither of the above hardware issues occurs because the hardware only continues packet parsing when the IPv6 Base Header Next Header field directly indicates UDP. Packets carrying a Fragment Header do not continue through the subsequent packet parsing stages. For packets identified for hardware PTP parsing, pad the transport data so it reaches RTASE_MIN_PAD_LEN before transmission. | ||||
| CVE-2026-68119 | 1 Linux | 1 Linux Kernel | 2026-08-13 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: tcp: initialize standalone TCP-AO response padding tcp_v4_send_ack() and tcp_v6_send_response() construct standalone TCP responses with TCP-AO options. The option length carries the actual MAC length, but the TCP header length includes the option rounded up to a four-byte boundary. tcp_ao_hash_hdr() writes the MAC only. Thus, when the MAC length is not four-byte aligned, the one to three bytes after the MAC are left uninitialized and may be transmitted. For the normal TCP-AO hashing mode, those bytes also have to be initialized before computing the MAC. Initialize only the alignment padding in the TCP-AO branches, before hashing the header. Use TCPOPT_NOP, as in the normal TCP-AO output path. This avoids adding work to non-AO TCP responses while preserving a valid authenticated header. | ||||
| CVE-2026-68118 | 1 Linux | 1 Linux Kernel | 2026-08-13 | 8.2 High |
| In the Linux kernel, the following vulnerability has been resolved: tcp: challenge ACK for non-exact RST in SYN-RECEIVED The SYN-RECEIVED request-socket path in tcp_check_req() accepts an in-window RST without requiring SEG.SEQ to exactly match RCV.NXT. A non-exact RST therefore removes the request instead of eliciting a challenge ACK. RFC 9293 section 3.10.7.4 applies the RFC 5961 reset check in SYN-RECEIVED: an exact RST resets the connection, while a non-exact in-window RST must trigger a challenge ACK and be dropped. Apply that check before the ACK-field validation, following the RFC sequence-number, RST, then ACK processing order. Factor the per-netns challenge ACK quota out of tcp_send_challenge_ack() so request sockets can share it. Use the request socket's send_ack() callback and its own out-of-window ACK timestamp to send and rate-limit the response. | ||||