Export limit exceeded: 362038 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 362038 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (362038 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-55488 | 1 Motioneye Project | 1 Motioneye | 2026-06-24 | N/A |
| motionEye (mEye) is an online interface for a piece of software called "motion," which is a video surveillance program with motion detection. Versions prior to 0.44.0 contain an absolute path traversal vulnerability in multiple media file handlers that allows an attacker to read arbitrary files from the filesystem. The affected handlers accept a user-controlled filename parameter and construct filesystem paths using `os.path.join()`. When an absolute path is supplied, Python discards the configured media directory and returns the attacker-supplied path directly. The application then bypasses Tornado's built-in path validation by overriding the relevant safety checks. As a result, an attacker can access files outside of the configured camera media directory, subject to the permissions of the motionEye process. Version 0.44.0 fixes the issue. | ||||
| CVE-2026-12760 | 2026-06-24 | N/A | ||
| A denial-of-service (DoS) vulnerability has been identified in Tapo C200 v3 in the network packet handling logic due to improper handling of IPv4 fragmented packets. An unauthenticated adjacent attacker can send crafted packets to cause excessive resource consumption, leading to instability of the device.Successful exploitation can remotely trigger a temporary denial-of-service condition, causing the camera to become unresponsive and resulting in intermittent loss of video monitoring and recording. | ||||
| CVE-2026-50193 | 1 Fasterxml | 1 Jackson-databind | 2026-06-24 | N/A |
| jackson-databind contains the general-purpose data-binding functionality and tree-model for Jackson Data Processor. From 2.13.0 until 2.14.0, a potential Denial-of-Service exists when attacker sends deeply nested JSON if (and only if) the service reads deeply nested (1000s of levels) JSON as JsonNode (ObjectMapper.readTree()) and writes out same (or modifided) node using JsonNode.toString(). This can consume significant amount of resources with concurrent relatively small requests (1000 nested arrays is 2kB). This vulnerability is fixed in 2.14.0. | ||||
| CVE-2026-48908 | 1 Joomshaper.net | 1 Sp Page Builder Extension For Joomla | 2026-06-24 | N/A |
| A vulnerability in SP Page Builder for Joomla allows unauthenticated users to upload arbitrary files, ultimately resulting in the upload and execution of PHP code. | ||||
| CVE-2026-52988 | 1 Linux | 1 Linux Kernel | 2026-06-24 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_tables: join hook list via splice_list_rcu() in commit phase Publish new hooks in the list into the basechain/flowtable using splice_list_rcu() to ensure netlink dump list traversal via rcu is safe while concurrent ruleset update is going on. | ||||
| CVE-2026-52996 | 1 Linux | 1 Linux Kernel | 2026-06-24 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix durable fd leak on ClientGUID mismatch in durable v2 open ksmbd_lookup_fd_cguid() returns a ksmbd_file with its refcount incremented via ksmbd_fp_get(). parse_durable_handle_context() in the DURABLE_REQ_V2 case properly releases this reference on every path inside the ClientGUID-match branch, either by calling ksmbd_put_durable_fd() or by transferring ownership to dh_info->fp for a successful reconnect. However, when an entry exists in the global file table with the same CreateGuid but a different ClientGUID, the code simply falls through to the new-open path without dropping the reference obtained from ksmbd_lookup_fd_cguid(). Per MS-SMB2 section 3.3.5.9.10 ("Handling the SMB2_CREATE_DURABLE_HANDLE_REQUEST_V2 Create Context"), the server MUST locate an Open whose Open.CreateGuid matches the request's CreateGuid AND whose Open.ClientGuid matches the ClientGuid of the connection that received the request. If no such Open is found, the server MUST continue with the normal open execution phase. A CreateGuid hit with a ClientGUID mismatch is therefore the "Open not found" case: proceeding with a new open is correct, but the reference obtained purely as a side effect of the lookup must not be leaked. Repeated requests that hit this mismatch pin global_ft entries, prevent __ksmbd_close_fd() from ever running for the corresponding files, and defeat the durable scavenger, leading to long-lived resource leaks. Release the reference in the mismatch path and clear dh_info->fp so subsequent logic does not mistake a non-matching lookup result for a reconnect target. | ||||
| CVE-2026-50700 | 1 Frappe | 2 Framework, Frappe Framework | 2026-06-24 | N/A |
| A Stored Cross-Site Scripting (XSS) vulnerability exists in Frappe Framework version 17.0.0-dev due to improper neutralization of user-controlled input in the frappe.get_avatar function. | ||||
| CVE-2026-50708 | 1 Frappe | 2 Framework, Frappe Framework | 2026-06-24 | N/A |
| A Stored Cross-Site Scripting (XSS) vulnerability exists in Frappe Framework version 17.0.0-dev due to improper neutralization of user-controlled input in the MultiSelectDialog component. | ||||
| CVE-2026-52950 | 1 Linux | 1 Linux Kernel | 2026-06-24 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/xe/dma-buf: fix UAF with retry loop Retry doesn't work here, since bo will be freed on error, leading to UAF. However, now that we do the alloc & init before the attach, we can now combine this as one unit and have the init do the alloc for us. This should make the retry safe. Reported by Sashiko. v2: Fix up the error unwind (CI) (cherry picked from commit 479669418253e0f27f8cf5db01a731352ea592e7) | ||||
| CVE-2026-52953 | 1 Linux | 1 Linux Kernel | 2026-06-24 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: iommu/vt-d: Fix oops due to out of scope access Below oops triggers when kill QEMU process: Oops: general protection fault, probably for non-canonical address 0x7fffffff844eaaa7: 0000 [#1] SMP NOPTI Call Trace: <TASK> do_raw_spin_lock+0xaa/0xc0 _raw_spin_lock_irqsave+0x21/0x40 domain_remove_dev_pasid+0x52/0x160 intel_nested_set_dev_pasid+0x1b9/0x1e0 __iommu_set_group_pasid+0x56/0x120 pci_dev_reset_iommu_done+0xe3/0x180 pcie_flr+0x65/0x160 __pci_reset_function_locked+0x5b/0x120 vfio_pci_core_close_device+0x63/0xe0 [vfio_pci_core] vfio_df_close+0x4f/0xa0 vfio_df_unbind_iommufd+0x2d/0x60 vfio_device_fops_release+0x3e/0x40 __fput+0xe5/0x2c0 task_work_run+0x58/0xa0 do_exit+0x2c8/0x600 do_group_exit+0x2f/0xa0 get_signal+0x863/0x8c0 arch_do_signal_or_restart+0x24/0x100 exit_to_user_mode_loop+0x87/0x380 do_syscall_64+0x2ff/0x11e0 entry_SYSCALL_64_after_hwframe+0x76/0x7e The global static blocked domain is a dummy domain without corresponding dmar_domain structure, accessing beyond iommu_domain structure triggers oops easily. Fix it by return early in domain_remove_dev_pasid() like identity domain. | ||||
| CVE-2026-52965 | 1 Linux | 1 Linux Kernel | 2026-06-24 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/ttm: Fix ttm_bo_swapout() infinite LRU walk on swapout failure When ttm_tt_swapout() fails, the current code calls ttm_resource_add_bulk_move() followed by ttm_resource_move_to_lru_tail() to restore the resource's bulk_move membership. However, ttm_resource_move_to_lru_tail() places the resource at the tail of the LRU list which, relative to the walk cursor's hitch node (placed immediately after the resource when it was yielded), puts the resource *in front of the* the hitch. The next list_for_each_entry_continue() from the hitch finds the same resource again, causing an infinite loop. Fix by deferring del_bulk_move to the success path only. On the success path, TTM_TT_FLAG_SWAPPED has just been set by ttm_tt_swapout() but the resource is still tracked in the bulk_move range, so ttm_resource_del_bulk_move()'s !ttm_resource_unevictable() guard would incorrectly skip the removal. Introduce ttm_resource_del_bulk_move_unevictable() which bypasses that guard. | ||||
| CVE-2026-52966 | 1 Linux | 1 Linux Kernel | 2026-06-24 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm: Replace old pointer to new idr Commit 5e28b7b94408 introduced a logical error by failing to replace the newly generated IDR pointer to old id's pointer at the correct location within the "change handle" logic; this resulted in the issue reported by syzbot [1]. Specifically, the new IDR object pointer is intended to replace the original id's pointer during the normal execution flow. Additionally, an unnecessary conditional check for the ret exit path has been removed. [1] !RB_EMPTY_ROOT(&prime_fpriv->dmabufs) WARNING: drivers/gpu/drm/drm_prime.c:224 at drm_prime_destroy_file_private+0x48/0x60 drivers/gpu/drm/drm_prime.c:224, CPU#0: syz.0.17/5833 Call Trace: drm_file_free.part.0+0x7e6/0xcc0 drivers/gpu/drm/drm_file.c:269 drm_file_free drivers/gpu/drm/drm_file.c:237 [inline] drm_close_helper.isra.0+0x186/0x200 drivers/gpu/drm/drm_file.c:290 drm_release+0x1ab/0x360 drivers/gpu/drm/drm_file.c:438 | ||||
| CVE-2026-48703 | 2026-06-24 | 7.8 High | ||
| Warp is an agentic development environment. From 0.2025.04.09.08.11.stable_00 until 0.2026.05.06.15.42.stable_01, Warp contains a command execution policy bypass in Agent code search tools. The affected Grep and FileGlob actions are authorized as read/search operations, but their implementations build shell command strings from Agent-controlled inputs (search text, paths, glob patterns) and execute them in the active terminal session. This vulnerability is fixed in 0.2026.05.06.15.42.stable_01. | ||||
| CVE-2026-48731 | 2026-06-24 | 7.8 High | ||
| Warp is an agentic development environment. From 0.2024.02.20.08.01.stable_01 until 0.2026.05.06.15.42.stable_01, Warp contains a command injection issue in the Linux external editor launcher. Warp expanded freedesktop .desktop Exec templates for affected editor integrations and executed the expanded command through a shell. A user who opens an attacker-controlled local file path through an affected external editor or system-default editor route can cause shell syntax embedded in that path to execute as the local user. This vulnerability is fixed in 0.2026.05.06.15.42.stable_01. | ||||
| CVE-2026-11807 | 1 Redhat | 1 Ansible Automation Platform | 2026-06-24 | 9.6 Critical |
| A missing authorization vulnerability was found in the Event-Driven Ansible (EDA) websocket API. The /api/eda/ws/ansible-rulebook endpoint does not verify user permissions when processing Worker messages. Any authenticated user can send a forged message with an arbitrary activation_id to receive plaintext credentials associated with that activation, including OAuth tokens, vault passwords, and SSH keys. | ||||
| CVE-2026-9073 | 1 Redhat | 1 Satellite | 2026-06-24 | 6.2 Medium |
| A flaw was found in foreman-mcp-server. This component utilizes two distinct logging mechanisms that can expose sensitive session and authentication data. One mechanism logs session identifiers, which are treated as authentication credentials, at an informational level. The other, when debug logging is enabled, incompletely sanitizes HTTP request headers, leading to the cleartext logging of sensitive information such as authorization tokens and API keys. This vulnerability can result in a confidentiality breach, as sensitive authentication data is persisted in plain text within container logs, increasing the risk if logs are forwarded to a centralized platform. | ||||
| CVE-2026-12986 | 1 Payara | 1 Payara Server | 2026-06-24 | N/A |
| A critical vulnerability in Admin GUI in Payara Server Full 4.x, 5.x, 6.x, 7.x, 7.2026.x, 6.2025.x, 6.2024.x on All platforms that allows the attacker to leak the admin gfresttoken to an attacker-controlled host that can result in a full unauthenticated takeover of Payara admin domain. A Server-Side Request Forgery (SSRF) vulnerability in the DownloadServlet of the Admin GUI in Payara Server allows a remote attacker to exfiltrate the administrator's REST session token (gfresttoken) to an attacker-controlled host via a crafted request URL. Combined with the absence of CSRF protection on DownloadServlet, an unauthenticated attacker can trick a logged-in administrator into triggering the token leak, then replay the stolen token to gain full administrative access to the Payara domain, leading to arbitrary code execution via WAR deployment. The vulnerability exists in the DownloadServlet and associated ContentSource implementations (LogViewerContentSource, LogFilesContentSource, LBConfigContentSource, ClientStubsContentSource) within the admingui:console-common module. | ||||
| CVE-2026-10753 | 2 Google, Wordpress | 2 Site Kit By Google, Wordpress | 2026-06-24 | 2.7 Low |
| The Site Kit by Google WordPress plugin before 1.176.0 does not properly restrict a REST API write endpoint to administrators, allowing lower-privileged users who have been granted dashboard sharing access (such as Editors) to modify a site-wide Site Kit by Google WordPress plugin before 1.176.0 setting that should only be modifiable by administrators. | ||||
| CVE-2026-9710 | 2 Cornerstone Project, Wordpress | 2 Cornerstone, Wordpress | 2026-06-24 | 7.7 High |
| The Cornerstone WordPress plugin before 7.8.8 does not enforce capability checks on one of its CSS-preview request handlers, and exposes the nonce needed to call it to every logged-in user on any wp-admin page, allowing any authenticated user to evaluate dynamic content tokens against arbitrary users and disclose their sensitive metadata including raw password hashes. This affects the premium co Cornerstone page builder distributed bundled with the X , not the unrelated free `cornerstone` Cornerstone WordPress plugin before 7.8.8 (v0.8.x) on the .org repository. | ||||
| CVE-2026-57281 | 1 Jenkins Project | 1 Jenkins Script Security Plugin | 2026-06-24 | 7.5 High |
| Jenkins Script Security Plugin 1402.v94c9ce464861 and earlier does not reject Groovy AST transformation annotations carrying an extensions member, allowing attackers able to run sandboxed Groovy scripts to execute code outside the sandbox if a suitable script is present on the classpath of the component that evaluates the script. | ||||