Export limit exceeded: 18029 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (18029 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2025-68226 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: fix incomplete backport in cfids_invalidation_worker() The previous commit bdb596ceb4b7 ("smb: client: fix potential UAF in smb2_close_cached_fid()") was an incomplete backport and missed one kref_put() call in cfids_invalidation_worker() that should have been converted to close_cached_dir(). | ||||
| CVE-2023-53697 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: nvdimm: Fix memleak of pmu attr_groups in unregister_nvdimm_pmu() Memory pointed by 'nd_pmu->pmu.attr_groups' is allocated in function 'register_nvdimm_pmu' and is lost after 'kfree(nd_pmu)' call in function 'unregister_nvdimm_pmu'. | ||||
| CVE-2025-68794 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: iomap: adjust read range correctly for non-block-aligned positions iomap_adjust_read_range() assumes that the position and length passed in are block-aligned. This is not always the case however, as shown in the syzbot generated case for erofs. This causes too many bytes to be skipped for uptodate blocks, which results in returning the incorrect position and length to read in. If all the blocks are uptodate, this underflows length and returns a position beyond the folio. Fix the calculation to also take into account the block offset when calculating how many bytes can be skipped for uptodate blocks. | ||||
| CVE-2023-53838 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: f2fs: synchronize atomic write aborts To fix a race condition between atomic write aborts, I use the inode lock and make COW inode to be re-usable thoroughout the whole atomic file inode lifetime. | ||||
| CVE-2023-54096 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: soundwire: fix enumeration completion The soundwire subsystem uses two completion structures that allow drivers to wait for soundwire device to become enumerated on the bus and initialised by their drivers, respectively. The code implementing the signalling is currently broken as it does not signal all current and future waiters and also uses the wrong reinitialisation function, which can potentially lead to memory corruption if there are still waiters on the queue. Not signalling future waiters specifically breaks sound card probe deferrals as codec drivers can not tell that the soundwire device is already attached when being reprobed. Some codec runtime PM implementations suffer from similar problems as waiting for enumeration during resume can also timeout despite the device already having been enumerated. | ||||
| CVE-2022-50819 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: udmabuf: Set ubuf->sg = NULL if the creation of sg table fails When userspace tries to map the dmabuf and if for some reason (e.g. OOM) the creation of the sg table fails, ubuf->sg needs to be set to NULL. Otherwise, when the userspace subsequently closes the dmabuf fd, we'd try to erroneously free the invalid sg table from release_udmabuf resulting in the following crash reported by syzbot: general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] PREEMPT SMP KASAN KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] CPU: 0 PID: 3609 Comm: syz-executor487 Not tainted 5.19.0-syzkaller-13930-g7ebfc85e2cd7 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 07/22/2022 RIP: 0010:dma_unmap_sgtable include/linux/dma-mapping.h:378 [inline] RIP: 0010:put_sg_table drivers/dma-buf/udmabuf.c:89 [inline] RIP: 0010:release_udmabuf+0xcb/0x4f0 drivers/dma-buf/udmabuf.c:114 Code: 48 89 fa 48 c1 ea 03 80 3c 02 00 0f 85 2b 04 00 00 48 8d 7d 0c 4c 8b 63 30 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 <0f> b6 14 02 48 89 f8 83 e0 07 83 c0 03 38 d0 7c 08 84 d2 0f 85 e2 RSP: 0018:ffffc900037efd30 EFLAGS: 00010246 RAX: dffffc0000000000 RBX: ffffffff8cb67800 RCX: 0000000000000000 RDX: 0000000000000000 RSI: ffffffff84ad27e0 RDI: 0000000000000000 RBP: fffffffffffffff4 R08: 0000000000000005 R09: 0000000000000000 R10: 0000000000000000 R11: 000000000008c07c R12: ffff88801fa05000 R13: ffff888073db07e8 R14: ffff888025c25440 R15: 0000000000000000 FS: 0000555555fc4300(0000) GS:ffff8880b9a00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fc1c0ce06e4 CR3: 00000000715e6000 CR4: 00000000003506f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> dma_buf_release+0x157/0x2d0 drivers/dma-buf/dma-buf.c:78 __dentry_kill+0x42b/0x640 fs/dcache.c:612 dentry_kill fs/dcache.c:733 [inline] dput+0x806/0xdb0 fs/dcache.c:913 __fput+0x39c/0x9d0 fs/file_table.c:333 task_work_run+0xdd/0x1a0 kernel/task_work.c:177 ptrace_notify+0x114/0x140 kernel/signal.c:2353 ptrace_report_syscall include/linux/ptrace.h:420 [inline] ptrace_report_syscall_exit include/linux/ptrace.h:482 [inline] syscall_exit_work kernel/entry/common.c:249 [inline] syscall_exit_to_user_mode_prepare+0x129/0x280 kernel/entry/common.c:276 __syscall_exit_to_user_mode_work kernel/entry/common.c:281 [inline] syscall_exit_to_user_mode+0x9/0x50 kernel/entry/common.c:294 do_syscall_64+0x42/0xb0 arch/x86/entry/common.c:86 entry_SYSCALL_64_after_hwframe+0x63/0xcd RIP: 0033:0x7fc1c0c35b6b Code: 0f 05 48 3d 00 f0 ff ff 77 45 c3 0f 1f 40 00 48 83 ec 18 89 7c 24 0c e8 63 fc ff ff 8b 7c 24 0c 41 89 c0 b8 03 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 35 44 89 c7 89 44 24 0c e8 a1 fc ff ff 8b 44 RSP: 002b:00007ffd78a06090 EFLAGS: 00000293 ORIG_RAX: 0000000000000003 RAX: 0000000000000000 RBX: 0000000000000007 RCX: 00007fc1c0c35b6b RDX: 0000000020000280 RSI: 0000000040086200 RDI: 0000000000000006 RBP: 0000000000000007 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000293 R12: 000000000000000c R13: 0000000000000003 R14: 00007fc1c0cfe4a0 R15: 00007ffd78a06140 </TASK> Modules linked in: ---[ end trace 0000000000000000 ]--- RIP: 0010:dma_unmap_sgtable include/linux/dma-mapping.h:378 [inline] RIP: 0010:put_sg_table drivers/dma-buf/udmabuf.c:89 [inline] RIP: 0010:release_udmabuf+0xcb/0x4f0 drivers/dma-buf/udmabuf.c:114 | ||||
| CVE-2022-50816 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: ipv6: ensure sane device mtu in tunnels Another syzbot report [1] with no reproducer hints at a bug in ip6_gre tunnel (dev:ip6gretap0) Since ipv6 mcast code makes sure to read dev->mtu once and applies a sanity check on it (see commit b9b312a7a451 "ipv6: mcast: better catch silly mtu values"), a remaining possibility is that a layer is able to set dev->mtu to an underflowed value (high order bit set). This could happen indeed in ip6gre_tnl_link_config_route(), ip6_tnl_link_config() and ipip6_tunnel_bind_dev() Make sure to sanitize mtu value in a local variable before it is written once on dev->mtu, as lockless readers could catch wrong temporary value. [1] skbuff: skb_over_panic: text:ffff80000b7a2f38 len:40 put:40 head:ffff000149dcf200 data:ffff000149dcf2b0 tail:0xd8 end:0xc0 dev:ip6gretap0 ------------[ cut here ]------------ kernel BUG at net/core/skbuff.c:120 Internal error: Oops - BUG: 00000000f2000800 [#1] PREEMPT SMP Modules linked in: CPU: 1 PID: 10241 Comm: kworker/1:1 Not tainted 6.0.0-rc7-syzkaller-18095-gbbed346d5a96 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/30/2022 Workqueue: mld mld_ifc_work pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : skb_panic+0x4c/0x50 net/core/skbuff.c:116 lr : skb_panic+0x4c/0x50 net/core/skbuff.c:116 sp : ffff800020dd3b60 x29: ffff800020dd3b70 x28: 0000000000000000 x27: ffff00010df2a800 x26: 00000000000000c0 x25: 00000000000000b0 x24: ffff000149dcf200 x23: 00000000000000c0 x22: 00000000000000d8 x21: ffff80000b7a2f38 x20: ffff00014c2f7800 x19: 0000000000000028 x18: 00000000000001a9 x17: 0000000000000000 x16: ffff80000db49158 x15: ffff000113bf1a80 x14: 0000000000000000 x13: 00000000ffffffff x12: ffff000113bf1a80 x11: ff808000081c0d5c x10: 0000000000000000 x9 : 73f125dc5c63ba00 x8 : 73f125dc5c63ba00 x7 : ffff800008161d1c x6 : 0000000000000000 x5 : 0000000000000080 x4 : 0000000000000001 x3 : 0000000000000000 x2 : ffff0001fefddcd0 x1 : 0000000100000000 x0 : 0000000000000089 Call trace: skb_panic+0x4c/0x50 net/core/skbuff.c:116 skb_over_panic net/core/skbuff.c:125 [inline] skb_put+0xd4/0xdc net/core/skbuff.c:2049 ip6_mc_hdr net/ipv6/mcast.c:1714 [inline] mld_newpack+0x14c/0x270 net/ipv6/mcast.c:1765 add_grhead net/ipv6/mcast.c:1851 [inline] add_grec+0xa20/0xae0 net/ipv6/mcast.c:1989 mld_send_cr+0x438/0x5a8 net/ipv6/mcast.c:2115 mld_ifc_work+0x38/0x290 net/ipv6/mcast.c:2653 process_one_work+0x2d8/0x504 kernel/workqueue.c:2289 worker_thread+0x340/0x610 kernel/workqueue.c:2436 kthread+0x12c/0x158 kernel/kthread.c:376 ret_from_fork+0x10/0x20 arch/arm64/kernel/entry.S:860 Code: 91011400 aa0803e1 a90027ea 94373093 (d4210000) | ||||
| CVE-2022-50809 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: xhci: dbc: Fix memory leak in xhci_alloc_dbc() If DbC is already in use, then the allocated memory for the xhci_dbc struct doesn't get freed before returning NULL, which leads to a memleak. | ||||
| CVE-2022-50619 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: Fix memory leak in kfd_mem_dmamap_userptr() If the number of pages from the userptr BO differs from the SG BO then the allocated memory for the SG table doesn't get freed before returning -EINVAL, which may lead to a memory leak in some error paths. Fix this by checking the number of pages before allocating memory for the SG table. | ||||
| CVE-2023-53702 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: s390/crypto: use vector instructions only if available for ChaCha20 Commit 349d03ffd5f6 ("crypto: s390 - add crypto library interface for ChaCha20") added a library interface to the s390 specific ChaCha20 implementation. However no check was added to verify if the required facilities are installed before branching into the assembler code. If compiled into the kernel, this will lead to the following crash, if vector instructions are not available: data exception: 0007 ilc:3 [#1] SMP Modules linked in: CPU: 0 PID: 1 Comm: swapper/0 Not tainted 6.3.0-rc7+ #11 Hardware name: IBM 3931 A01 704 (KVM/Linux) Krnl PSW : 0704e00180000000 000000001857277a (chacha20_vx+0x32/0x818) R:0 T:1 IO:1 EX:1 Key:0 M:1 W:0 P:0 AS:3 CC:2 PM:0 RI:0 EA:3 Krnl GPRS: 0000037f0000000a ffffffffffffff60 000000008184b000 0000000019f5c8e6 0000000000000109 0000037fffb13c58 0000037fffb13c78 0000000019bb1780 0000037fffb13c58 0000000019f5c8e6 000000008184b000 0000000000000109 00000000802d8000 0000000000000109 0000000018571ebc 0000037fffb13718 Krnl Code: 000000001857276a: c07000b1f80b larl %r7,0000000019bb1780 0000000018572770: a708000a lhi %r0,10 #0000000018572774: e78950000c36 vlm %v24,%v25,0(%r5),0 >000000001857277a: e7a060000806 vl %v26,0(%r6),0 0000000018572780: e7bf70004c36 vlm %v27,%v31,0(%r7),4 0000000018572786: e70b00000456 vlr %v0,%v27 000000001857278c: e71800000456 vlr %v1,%v24 0000000018572792: e74b00000456 vlr %v4,%v27 Call Trace: [<000000001857277a>] chacha20_vx+0x32/0x818 Last Breaking-Event-Address: [<0000000018571eb6>] chacha20_crypt_s390.constprop.0+0x6e/0xd8 ---[ end trace 0000000000000000 ]--- Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b Fix this by adding a missing MACHINE_HAS_VX check. [agordeev@linux.ibm.com: remove duplicates in commit message] | ||||
| CVE-2025-40232 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: rv: Fully convert enabled_monitors to use list_head as iterator The callbacks in enabled_monitors_seq_ops are inconsistent. Some treat the iterator as struct rv_monitor *, while others treat the iterator as struct list_head *. This causes a wrong type cast and crashes the system as reported by Nathan. Convert everything to use struct list_head * as iterator. This also makes enabled_monitors consistent with available_monitors. | ||||
| CVE-2023-54254 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/ttm: Don't leak a resource on eviction error On eviction errors other than -EMULTIHOP we were leaking a resource. Fix. v2: - Avoid yet another goto (Andi Shyti) | ||||
| CVE-2025-40278 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: sched: act_ife: initialize struct tc_ife to fix KMSAN kernel-infoleak Fix a KMSAN kernel-infoleak detected by the syzbot . [net?] KMSAN: kernel-infoleak in __skb_datagram_iter In tcf_ife_dump(), the variable 'opt' was partially initialized using a designatied initializer. While the padding bytes are reamined uninitialized. nla_put() copies the entire structure into a netlink message, these uninitialized bytes leaked to userspace. Initialize the structure with memset before assigning its fields to ensure all members and padding are cleared prior to beign copied. This change silences the KMSAN report and prevents potential information leaks from the kernel memory. This fix has been tested and validated by syzbot. This patch closes the bug reported at the following syzkaller link and ensures no infoleak. | ||||
| CVE-2025-40296 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: platform/x86: int3472: Fix double free of GPIO device during unregister regulator_unregister() already frees the associated GPIO device. On ThinkPad X9 (Lunar Lake), this causes a double free issue that leads to random failures when other drivers (typically Intel THC) attempt to allocate interrupts. The root cause is that the reference count of the pinctrl_intel_platform module unexpectedly drops to zero when this driver defers its probe. This behavior can also be reproduced by unloading the module directly. Fix the issue by removing the redundant release of the GPIO device during regulator unregistration. | ||||
| CVE-2023-54020 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: dmaengine: sf-pdma: pdma_desc memory leak fix Commit b2cc5c465c2c ("dmaengine: sf-pdma: Add multithread support for a DMA channel") changed sf_pdma_prep_dma_memcpy() to unconditionally allocate a new sf_pdma_desc each time it is called. The driver previously recycled descs, by checking the in_use flag, only allocating additional descs if the existing one was in use. This logic was removed in commit b2cc5c465c2c ("dmaengine: sf-pdma: Add multithread support for a DMA channel"), but sf_pdma_free_desc() was not changed to handle the new behaviour. As a result, each time sf_pdma_prep_dma_memcpy() is called, the previous descriptor is leaked, over time leading to memory starvation: unreferenced object 0xffffffe008447300 (size 192): comm "irq/39-mchp_dsc", pid 343, jiffies 4294906910 (age 981.200s) hex dump (first 32 bytes): 00 00 00 ff 00 00 00 00 b8 c1 00 00 00 00 00 00 ................ 00 00 70 08 10 00 00 00 00 00 00 c0 00 00 00 00 ..p............. backtrace: [<00000000064a04f4>] kmemleak_alloc+0x1e/0x28 [<00000000018927a7>] kmem_cache_alloc+0x11e/0x178 [<000000002aea8d16>] sf_pdma_prep_dma_memcpy+0x40/0x112 Add the missing kfree() to sf_pdma_free_desc(), and remove the redundant in_use flag. | ||||
| CVE-2025-40302 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: media: videobuf2: forbid remove_bufs when legacy fileio is active vb2_ioctl_remove_bufs() call manipulates queue internal buffer list, potentially overwriting some pointers used by the legacy fileio access mode. Forbid that ioctl when fileio is active to protect internal queue state between subsequent read/write calls. | ||||
| CVE-2023-53759 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: HID: hidraw: fix data race on device refcount The hidraw_open() function increments the hidraw device reference counter. The counter has no dedicated synchronization mechanism, resulting in a potential data race when concurrently opening a device. The race is a regression introduced by commit 8590222e4b02 ("HID: hidraw: Replace hidraw device table mutex with a rwsem"). While minors_rwsem is intended to protect the hidraw_table itself, by instead acquiring the lock for writing, the reference counter is also protected. This is symmetrical to hidraw_release(). | ||||
| CVE-2023-54083 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: phy: tegra: xusb: Clear the driver reference in usb-phy dev For the dual-role port, it will assign the phy dev to usb-phy dev and use the port dev driver as the dev driver of usb-phy. When we try to destroy the port dev, it will destroy its dev driver as well. But we did not remove the reference from usb-phy dev. This might cause the use-after-free issue in KASAN. | ||||
| CVE-2025-40169 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Reject negative offsets for ALU ops When verifying BPF programs, the check_alu_op() function validates instructions with ALU operations. The 'offset' field in these instructions is a signed 16-bit integer. The existing check 'insn->off > 1' was intended to ensure the offset is either 0, or 1 for BPF_MOD/BPF_DIV. However, because 'insn->off' is signed, this check incorrectly accepts all negative values (e.g., -1). This commit tightens the validation by changing the condition to '(insn->off != 0 && insn->off != 1)'. This ensures that any value other than the explicitly permitted 0 and 1 is rejected, hardening the verifier against malformed BPF programs. | ||||
| CVE-2025-40293 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: iommufd: Don't overflow during division for dirty tracking If pgshift is 63 then BITS_PER_TYPE(*bitmap->bitmap) * pgsize will overflow to 0 and this triggers divide by 0. In this case the index should just be 0, so reorganize things to divide by shift and avoid hitting any overflows. | ||||