Export limit exceeded: 430090 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 430090 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 430090 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (430090 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-99774 | 1 Linux | 1 Linux Kernel | 2026-11-20 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: xfrm: espintcp: reorder operations within espintcp_init_sk When enabled on a socket, espintcp sets the socket callbacks to its own before it has finished setting up its context and published it as icsk_ulp_data. Any one of those callbacks that gets called before will dereference a NULL icsk_ulp_data. Fix this by reording the operations, and add memory barriers to ensure callers will have a struct espintcp_ctx available. Add a few WRITE_ONCE/READ_ONCE too while we're there. | ||||
| CVE-2026-99771 | 1 Linux | 1 Linux Kernel | 2026-11-20 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: reload TDLS header pointer after skb_linearize() ieee80211_process_tdls_channel_switch() sets tf = skb->data before it calls skb_linearize(), and reads tf->action_code afterwards. ieee80211_rx_h_data() queues TDLS channel switch requests and responses to the interface after pulling only offsetof(struct ieee80211_tdls_data, u) bytes, so the skb can still be non-linear when the interface work handles it. Drivers that build paged RX skbs do this for every frame that does not fit into the skb head, e.g. iwlwifi (mvm), which is also the only mac80211 driver that sets NL80211_FEATURE_TDLS_CHANNEL_SWITCH. If the remaining data does not fit into the tailroom, skb_linearize() moves the data to a new head and frees the old one, and the action code is then read from freed memory. Depending on what that memory holds by then, the frame is handled as before or ends in the WARN_ON_ONCE() of the default case. The frame only has to be a data frame with the TDLS ethertype from an authorized peer, e.g. relayed by the AP from another station in the BSS; the read happens before the sender is checked to be a TDLS peer. Load tf after skb_linearize(), as the request and response handlers already do. Found by static analysis tool CodeQL. | ||||
| CVE-2026-99768 | 1 Linux | 1 Linux Kernel | 2026-11-20 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: reinstate IEEE80211_TX_CTL_AMPDU flag in ieee80211_tx_prep_agg() The commit 592234e941f1 ("wifi: mac80211: Fix iTXQ AMPDU fragmentation handling") changed the way handling of the IEEE80211_TX_CTL_AMPDU flag is done in mac80211, so the only place it is set is in ieee80211_tx_dequeue(). This means that any frames that are sent to the driver via drv_tx() will no longer have the flag set. In particular, this affects packets going through ieee80211_tx_pending(). Evan reported that this can result in the ath9k driver failing to account such packets in its block ack window, eventually overrunning the window and stalling TX. Fix this by reinstating the flag in ieee80211_tx_prep_agg() when inside a valid block ack window. This should be harmless for the TXQ path, and will reinstate the previous behaviour for drivers that use the flag as a signal to track the packet in the window. | ||||
| CVE-2026-99764 | 1 Linux | 1 Linux Kernel | 2026-11-20 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: 9p/xen: validate the response size from the backend p9_xen_response() takes the length of an incoming response from the ring -- the first field of the 9p header, which the Xen transport reuses as its framing header -- and uses it to advance the consumer index, but never checks that it is at least the header size or no larger than the number of bytes the backend has actually produced. A malicious or buggy backend can post a response whose size is smaller than the header (for example 0). The consumer index then never advances, so the response work re-reads the same ring contents instead of making progress. In testing this raced with the teardown that the malformed reply triggers and dereferenced a freed p9_client: 9pfs 9pfs-0: Wrong req tag=ffff BUG: kernel NULL pointer dereference, address: 0000000000000060 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: Oops: 0000 [#1] SMP NOPTI CPU: 0 UID: 0 PID: 11 Comm: kworker/0:1 Not tainted 7.2.0-rc5 #6 PREEMPT(lazy) Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.17.0-0-gb52ca86e094d-prebuilt.qemu.org 04/01/2014 Workqueue: events p9_xen_response RIP: 0010:idr_find+0x4/0x10 RSP: 0018:ffffbf5d80063de8 EFLAGS: 00010202 RAX: 0000000000000001 RBX: ffffa229c21195a0 RCX: ffffa229c2400000 RDX: ffffa229c11c2200 RSI: 000000000000ffff RDI: 0000000000000050 RBP: 000000000000ffff R08: 3fffffffffffdfff R09: ffffffffffffffff R10: 3fffffffffffdfff R11: ffffffff87a60e80 R12: 0000000000000050 R13: 0000000000000000 R14: 000000000000ffff R15: 0000000000100000 FS: 0000000000000000(0000) GS:ffffa22a7661c000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000060 CR3: 000000003ac34002 CR4: 0000000000770ef0 PKRU: 55555554 Call Trace: <TASK> p9_tag_lookup+0x2b/0x90 p9_xen_response+0x17c/0x2e0 process_one_work+0x16a/0x3a0 worker_thread+0x172/0x2e0 kthread+0xdd/0x110 ret_from_fork+0x18b/0x240 ret_from_fork_asm+0x1a/0x30 </TASK> Modules linked in: CR2: 0000000000000060 ---[ end trace 0000000000000000 ]--- Reject a response whose size is outside [sizeof(header), queued] before using it, matching the validation the backend already applies to incoming requests. | ||||
| CVE-2026-99763 | 1 Linux | 1 Linux Kernel | 2026-11-20 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: 9p: don't decrement a server-owned zero nlink A 9P2000.L server can report nlink=0 for a regular file that still exists. On a cache=loose or cache=fscache mount, lookup stores that value with set_nlink(). A later successful unlink calls v9fs_dec_count(), which still calls drop_nlink() for a non-directory. drop_nlink() warns, and the unsigned link count wraps to 4294967295. fstat() on a descriptor opened before the unlink shows 0 before and 4294967295 after. The warning on the unpatched kernel, trimmed: WARNING: fs/inode.c:408 at drop_nlink+0xac/0xd0, CPU#1: trigger/188 CPU: 1 UID: 0 PID: 188 Comm: trigger Tainted: G N 7.3.0-rc4-00537-ga3ff15db6820 #1 PREEMPT(lazy) RIP: 0010:drop_nlink+0xac/0xd0 Call Trace: <TASK> v9fs_remove+0x529/0x750 vfs_unlink+0x2f0/0xbd0 filename_unlinkat+0x340/0x6c0 __x64_sys_unlink+0x46/0x70 do_syscall_64+0xe8/0x4f0 entry_SYSCALL_64_after_hwframe+0x77/0x7f </TASK> ---[ end trace 0000000000000000 ]--- Directories whose cached nlink is at most 2 already skip this decrement, because the exported filesystem may not maintain nlink (commit ac89b2ef9b559). cache=none skips it as well (commit 574aa0b479947). cache=mmap does not take this path: it sets neither CACHE_META nor CACHE_LOOSE. A regular file on cache=loose or cache=fscache still does. Its count came from GETATTR and may already be zero, so skip the decrement when i_nlink is already 0. Verified on 7.3-rc4-00537-ga3ff15db6820 with only this change. A server that advertises nlink=0 and accepts the unlink no longer warns, and the open descriptor stays at nlink 0. An honest server on the same mount still goes from 1 to 0. A rejected unlink leaves the count unchanged. cache=none is unchanged. With panic_on_warn the unpatched kernel panics on the warning; the patched kernel does not. | ||||
| CVE-2026-99762 | 1 Linux | 1 Linux Kernel | 2026-11-20 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: batman-adv: mcast: validate tracker padding before forwarding A multicast tracker with an even number of destinations needs two padding bytes after its destination list. batadv_mcast_forw_packet() currently only checks that the count field and the addresses fit in the tracker TVLV. If an unpadded even tracker is compacted to an odd number of destinations, batadv_mcast_forw_shrink_update_headers() includes those missing padding bytes in the amount to remove. The subsequent memmove can then write two bytes past the old packet tail. With no tailroom, this corrupts skb_shared_info. Include the required padding in the existing tracker length check. This rejects the malformed tracker before either received or locally generated packets can reach the compactor. | ||||
| CVE-2026-99761 | 1 Linux | 1 Linux Kernel | 2026-11-20 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: batman-adv: stop originator purge worker before freeing TT batadv_mesh_free() releases the translation tables via batadv_tt_free() before batadv_originator_free() stops orig_work. The purge worker can therefore still run while the TT is torn down. When an originator times out, batadv_purge_orig_ref() calls batadv_tt_global_del_orig(), which loads tt.global_hash and walks all buckets while taking their locks: CPU0 CPU1 batadv_tt_free() batadv_purge_orig() batadv_tt_global_del_orig() hash = ...tt.global_hash; batadv_tt_global_table_free() batadv_hash_destroy(hash); spin_lock_bh(&hash->list_locks[i]); Disable orig_work at the beginning of batadv_mesh_free(), directly after the mesh was marked as deactivating. The second disable_delayed_work_sync() in batadv_originator_free() is harmless because it is free'd anyway. | ||||
| CVE-2026-99759 | 1 Linux | 1 Linux Kernel | 2026-11-20 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: batman-adv: tt: don't drop local events queued during TVLV update batadv_tt_tvlv_container_update() read the number of local changes without holding changes_list_lock. batadv_tt_local_event() is not serialized by the commit_lock and can queue new events before the changes_list is flushed: CPU0 CPU1 batadv_tt_tvlv_container_update() num = ...local_changes; batadv_tt_local_event() list_add_tail(...); ...local_changes++; spin_lock_bh(&...changes_list_lock); /* only num events copied but all freed */ The additional events were freed without ever being sent. Other nodes will only notice this via a CRC mismatch and must request the full table. The number of changes and the changes_list must therefore be taken atomically. Events queued afterwards then stay in the tt.changes_list for the next TT round. The changes can no longer be kept for the next round when the TVLV buffer allocation fails. But they would be sent with a skipped TTVN anyway, so the other nodes have to request the full table in this case either way. The last changeset is only dropped in this case when the TTVN was incremented. Without new changes, it still describes the current TTVN. Previously, the unconsumed changes caused a retry of the TVLV container update in the next commit round. Since the changes are now consumed, the next round would only take the path without changes and wait for BATADV_TT_OGM_APPEND_MAX rounds before updating the container again. Until then, the outdated container with the previous TTVN would still be announced. The ogm_append_cnt is therefore reset on failure to retry the update in the next OGM interval. This doesn't make the CRC consistent with the announced changeset. The local table modifications are still not serialized with the commit and batadv_tt_local_transition_new() can still make a client part of the CRC for which the event is only part of the next TT round. Such an inconsistency is detected by the CRC check of the other nodes and solved via a full table request. | ||||
| CVE-2026-99757 | 1 Linux | 1 Linux Kernel | 2026-11-20 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: sysfs: restore NOFS context on early return in btrfs_sysfs_add_block_group_type() btrfs_sysfs_add_block_group_type() sets up a NOFS context with memalloc_nofs_save() because kobject_add() performs GFP_KERNEL allocations deep in its call chain, and the function may be called while holding a transaction handle or a lock required for a transaction commit, where reclaim could deadlock. Every other return path of this function calls memalloc_nofs_restore() except the early return taken when another thread has already created the kobject for the same raid index (this can happen when restriping). Taking that path leaves PF_MEMALLOC_NOFS set on the calling task, so all subsequent memory allocations performed by that task remain restricted to the NOFS scope, which may lead to unexpected allocation failures or deadlocks later on. Restore the NOFS context before returning from that path. | ||||
| CVE-2026-99749 | 1 Linux | 1 Linux Kernel | 2026-11-20 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: enforce the read-only share flag when creating a stream When a share is read-only, smb2_open() rejects opens that would create or truncate a file. Creating a named stream on an existing file with streams_xattr sets neither O_CREAT nor O_TRUNC, so it passes this check, and smb2_set_stream_name_xattr() then creates the stream. On a Time Machine share, opening a missing AFP_AfpInfo stream also writes one. A user who can write a file at the filesystem level can therefore add streams to it through a read-only share. Do not create a stream or synthesize AFP_AfpInfo when the share is not writable. Existing streams still open normally, and a missing stream opened with FILE_OPEN still returns STATUS_OBJECT_NAME_NOT_FOUND. | ||||
| CVE-2026-99748 | 1 Linux | 1 Linux Kernel | 2026-11-20 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: revert fsids on durable reconnect and replay failure On a durable handle reconnect or a request replay, smb2_open() switches to the SMB user's fsids before calling ksmbd_vfs_getattr(). If that call fails, the code jumps to err_out2 and skips ksmbd_revert_fsids() at err_out1. The user's credentials then stay installed on the shared ksmbd worker. Later work on that worker, including other users' requests, runs with the first user's fsuid, fsgid and supplementary groups. ksmbd_free_work_struct() also warns, because work->saved_cred is still set. Jump to err_out1 instead. No path is held at this point, so skipping the path_put() at err_out is correct. | ||||
| CVE-2026-99747 | 1 Linux | 1 Linux Kernel | 2026-11-20 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix NULL pointer dereference in session_user_name() and session_account_type() session_user_name() and session_account_type() dereference session->user without checking for NULL. A session can be published and exposed via the procfs session interface before authentication completes, during which session->user is NULL: show_proc_session() -> session_user_name(sess) -> user_guest(session->user) -> NULL->flags -> oops Guard both functions by treating a NULL session->user as an explicit not-yet-authenticated state rather than dereferencing it. | ||||
| CVE-2026-99746 | 1 Linux | 1 Linux Kernel | 2026-11-20 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ASoC: SOF: Intel: hda-sdw-bpt: Stop active DMA before closing BPT streams When sdw_enable_stream() fails in intel_ace2x_bpt_send_async() after hda_sdw_bpt_send_async() has already started the TX and RX DMA streams, intel_ace2x_bpt_close_stream() invokes hda_sdw_bpt_close() directly without calling hda_sdw_bpt_wait(). As a result, hda_sdw_bpt_dma_deprepare() tears down the DMA buffers and BDL while the DMA hardware is still running. Disable any running TX or RX BPT DMA stream at the start of hda_sdw_bpt_close() before unmapping channels and depreparing DMA resources. | ||||
| CVE-2026-99739 | 1 Linux | 1 Linux Kernel | 2026-11-20 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: mm/shmem: fix truncate hang in large swap entry Truncating a tmpfs file or memfd to a page-aligned size inside a large swap entry can loop indefinitely in shmem_undo_range(). The task holds the inode lock and cannot be killed. A large swap entry represents a whole swapped-out folio. For example, truncate a file whose pages 0-7 share one swap entry to four pages: [ 0 1 2 3 | 4 5 6 7 ] keep | discard ^ new EOF, start = 4 i_size has already been updated when boundary handling asks shmem_get_partial_folio() for page 4. Since it is swapped out, the helper calls shmem_get_folio() with SGP_READ. That rejects page 4 with -EINVAL because its starting offset equals i_size. Nothing is read back. The final scan cannot free the entry without losing pages 0-3. It skips it, restarts from start = 4, and finds it again indefinitely. An unaligned truncate avoids this particular failure because the requested page starts below i_size. Folios already in the page-cache cannot trigger it as the direct lookup will return them beyond EOF. Fix it by letting shmem_get_partial_folio() call shmem_swapin_folio() directly for swap entries. This bypasses the read path's i_size check, allowing the existing boundary handling to zero and split the folio. If swap-in returns a smaller folio, it also splits the swap entry so the final scan can free the entries beyond EOF. Retry the lookup if the entry changes during swap-in. Handling swap-in allocation failures remains broken and is unchanged by this commit. Even when shmem_swapin_folio() correctly returns -ENOMEM instead of -EEXIST, shmem_get_partial_folio() returns NULL and shmem_undo_range() skips boundary handling. If the large swap entry remains intact, truncation can still loop in the final scan, while hole punching can return without zeroing the boundary. This may read an entire large folio back from swap while holding i_rwsem, only to discard part of it. Avoiding that I/O would require splitting both the swap entry and any large folio still in the swap cache. That, however, is much bigger work. | ||||
| CVE-2026-99736 | 1 Linux | 1 Linux Kernel | 2026-11-20 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: mm/shmem: fix accounting of swapin-error markers A failed swap read replaces the swap entry with a swapin-error marker in the page-cache and subtracts its pages from "alloced" and "swapped"; however, it leaves their block charge in place. Removing the marker during truncate then subtracts from "swapped" again. This can underflow the counters or make swapped reach zero while other pages remain swapped out, causing swapoff to loop without finding them. When installing the marker, subtract only from "swapped" and let shmem_recalc_inode() reduce "alloced" and release the block charge. Make shmem_free_swap() report successful removal separately from the number of swap pages freed, so removing a swapin-error marker does not subtract from "swapped" again. It's a bit confusing, but replacing a swapped out page by a swapin-error marker in shmem_set_folio_swapin_error() behaves as follows: Initially: alloced=1, swapped=1, nrpages=0 Calling shmem_recalc_inode(inode, 0, -1) -> swapped = 0 -> freed = 1 - 0 - 0 = 1 -> alloced -= freed -> alloced=0, swapped=0, block charge released | ||||
| CVE-2026-99734 | 1 Linux | 1 Linux Kernel | 2026-11-20 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: mm/shmem: make shmem_file() check the file's inode shmem_file() only checks if file->f_mapping is a shmem mapping. This mapping can belong to another file, however, as with a Coda file backed by a tmpfs container after mmap(). So it does not guarantee that the file inode is an actual shmem inode. Seal handling and memfd preservation use this check before accessing shmem inode state, so they can access an inode of the wrong type. Let's make shmem_file() check the inode's file operations instead, to identify shmem inodes reliably. This will identify regular shmem inodes, including memfds and ordinary tmpfs files, independently of wrapper file operations. Use shmem_mapping() in collapse_file() instead to not change the behavior of collapse_file(): it operates on the page cache and uses mapping->host for shmem inode operations. Focusing on the file does not seem relevant. | ||||
| CVE-2026-99732 | 1 Linux | 1 Linux Kernel | 2026-11-20 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: mm/filemap: read mapping->a_ops->free_folio under i_lock memory_failure() -> ... -> filemap_remove_folio() can read mapping->a_ops after the inode has been freed. Once the folio is deleted from the pagecache it no longer pins the mapping, so after i_lock is dropped e.g., a concurrent final iput() can evict and free the inode before filemap_free_folio() looks up mapping->a_ops->free_folio. Most callers hold a reference on the inode, but not all. Documentation/filesystems/vfs.rst explicitly states that ->free_folio() must not assume the original address_space mapping still exists. Fix it by loading ->free_folio while i_lock is still held, similar to what folio_unmap_invalidate() does. Inline filemap_free_folio() into its remaining caller such that delete_from_page_cache_batch() also just loads the callback before dropping the i_lock. The bug was found by code inspection and has not been reproduced. Fix generated by an LLM and sent by Josef Bacik in private. [ david: get rid of filemap_free_folio() entirely; improve patch description ] | ||||
| CVE-2026-99727 | 1 Linux | 1 Linux Kernel | 2026-11-20 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: mm/huge_memory: properly handle refcounted PUD mappings on fork copy_huge_pud() copies device-DAX entries without taking a folio reference or updating mapcounts and the child's RSS. For example, MADV_GUARD_INSTALL sets VM_MAYBE_GUARD on a device-DAX VMA, forcing copy_page_range() to traverse the whole VMA on fork. Any remaining huge PUDs are then copied without accounting for the new mappings. Unmapping them in the child decrements accounting that was never added. Use vm_normal_page_pud() to identify refcounted mappings. Take a folio reference and add the child's PUD rmap and RSS accounting before installing the copied entry. Pass src and dst VMAs consistently instead of src and dst MM. Move the TODO. | ||||
| CVE-2026-99725 | 1 Linux | 1 Linux Kernel | 2026-11-20 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: cipso: fix optlen corruption in cipso_v4_delopt() cipso_v4_delopt() recomputes the option length by walking the option buffer after the CIPSO option has been moved out. The walk then reads the stale bytes at the tail of the buffer as option data, and a crafted setsockopt(IP_OPTIONS) buffer can make it treat one of them as an option length, increasing opt->opt.optlen beyond the valid option data. The corrupted length stays on the socket and is later used as the copy length by getsockopt(IP_OPTIONS) and by the udp/raw/ping sendmsg paths, where it exceeds the size of the buffers they copy into. Compute the new length from the intact options before the move and subtract the CIPSO length, and fill the padding with IPOPT_END. | ||||
| CVE-2026-99724 | 1 Linux | 1 Linux Kernel | 2026-11-20 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ntfs: don't allow compression on volumes with clusters larger than 4K On a volume made with "mkntfs -c 8192", a user can set FILE_ATTR_COMPRESSED on an empty file through system.ntfs_attrib. Writing to the file and reading it back after dropping the page cache then crashes: BUG: KASAN: slab-out-of-bounds in ntfs_read_compressed_block+0xa2c/0x2040 Read of size 8192 at addr ffff88804355a000 by task dd/106 The read path only handles clusters up to 4K. It copies each cluster out of a single page, and a compression block of 16 8K clusters does not fit in the 64K ntfs_compression_buffer. Loading an inode already rejects compressed data on such volumes. Reject the flag change the same way. | ||||