Export limit exceeded: 362557 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (362557 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-52969 | 1 Linux | 1 Linux Kernel | 2026-06-26 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: KVM: Reject wrapped offset in kvm_reset_dirty_gfn() kvm_reset_dirty_gfn() guards the gfn range with if (!memslot || (offset + __fls(mask)) >= memslot->npages) return; but offset is u64 and the addition is unchecked. The check can be silently bypassed by a u64 wrap. The dirty ring backing those entries is MAP_SHARED at KVM_DIRTY_LOG_PAGE_OFFSET of the vcpu fd, so the VMM can rewrite the slot and offset fields of any entry between when the kernel pushes them and when KVM_RESET_DIRTY_RINGS consumes them. On reset, kvm_dirty_ring_reset() re-reads the values via READ_ONCE() and feeds them straight back into this check; only the flags handshake is treated as the handover, the slot/offset payload is taken on trust. Crafting two entries entry[i].offset = 0xffffffffffffffc1 entry[i+1].offset = 0 makes the coalescing loop in kvm_dirty_ring_reset() compute delta = (s64)(0 - 0xffffffffffffffc1) = 63 which falls in [0, BITS_PER_LONG), so it folds entry[i+1] into the existing mask by setting bit 63. The trailing kvm_reset_dirty_gfn() call then sees offset = 0xffffffffffffffc1 and __fls(mask) = 63; the sum is 0 in u64 and the bounds check passes. That offset propagates into kvm_arch_mmu_enable_log_dirty_pt_masked() unchanged. On the legacy MMU path -- kvm_memslots_have_rmaps() == true, i.e. shadow paging, any VM that has allocated shadow roots, or a write-tracked slot -- it reaches gfn_to_rmap(), which indexes slot->arch.rmap[0][] with a near-U64_MAX gfn. That is an out-of-bounds load of a kvm_rmap_head, followed by a conditional clear of PT_WRITABLE_MASK in whatever the loaded pointer points at. The path is reachable from any process holding /dev/kvm. Range-check offset on its own first, so the addition cannot wrap. memslot->npages is bounded well below U64_MAX, so once offset < npages holds, offset + __fls(mask) (with __fls(mask) < BITS_PER_LONG) stays in range. | ||||
| CVE-2026-53001 | 1 Linux | 1 Linux Kernel | 2026-06-26 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: xtables: restrict several matches to inet family This is a partial revert of: commit ab4f21e6fb1c ("netfilter: xtables: use NFPROTO_UNSPEC in more extensions") to allow ipv4 and ipv6 only. - xt_mac - xt_owner - xt_physdev These extensions are not used by ebtables in userspace. Moreover, xt_realm is only for ipv4, since dst->tclassid is ipv4 specific. | ||||
| CVE-2026-53004 | 1 Linux | 1 Linux Kernel | 2026-06-26 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: sctp: fix OOB write to userspace in sctp_getsockopt_peer_auth_chunks sctp_getsockopt_peer_auth_chunks() checks that the caller's optval buffer is large enough for the peer AUTH chunk list with if (len < num_chunks) return -EINVAL; but then writes num_chunks bytes to p->gauth_chunks, which lives at offset offsetof(struct sctp_authchunks, gauth_chunks) == 8 inside optval. The check is missing the sizeof(struct sctp_authchunks) = 8-byte header. When the caller supplies len == num_chunks (for any num_chunks > 0) the test passes but copy_to_user() writes sizeof(struct sctp_authchunks) = 8 bytes past the declared buffer. The sibling function sctp_getsockopt_local_auth_chunks() at the next line already has the correct check: if (len < sizeof(struct sctp_authchunks) + num_chunks) return -EINVAL; Align the peer variant with its sibling. Reproducer confirms on v7.0-13-generic: an unprivileged userspace caller that opens a loopback SCTP association with AUTH enabled, queries num_chunks with a short optval, then issues the real getsockopt with len == num_chunks and sentinel bytes painted past the buffer observes those sentinel bytes overwritten with the peer's AUTH chunk type. The bytes written are under the peer's control but land in the caller's own userspace; this is not a kernel memory corruption, but it is a kernel-side contract violation that can silently corrupt adjacent userspace data. | ||||
| CVE-2026-53061 | 1 Linux | 1 Linux Kernel | 2026-06-26 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: dm cache: fix dirty mapping checking in passthrough mode switching As mentioned in commit 9b1cc9f251af ("dm cache: share cache-metadata object across inactive and active DM tables"), dm-cache assumed table reload occurs after suspension, while LVM's table preload breaks this assumption. The dirty mapping check for passthrough mode was designed around this assumption and is performed during table creation, causing the check to fail with preload while metadata updates are ongoing. This risks loading dirty mappings into passthrough mode, resulting in data loss. Reproduce steps: 1. Create a writeback cache with zero migration_threshold to produce dirty mappings dmsetup create cmeta --table "0 8192 linear /dev/sdc 0" dmsetup create cdata --table "0 131072 linear /dev/sdc 8192" dmsetup create corig --table "0 262144 linear /dev/sdc 262144" dd if=/dev/zero of=/dev/mapper/cmeta bs=4k count=1 oflag=direct dmsetup create cache --table "0 262144 cache /dev/mapper/cmeta \ /dev/mapper/cdata /dev/mapper/corig 128 2 metadata2 writeback smq \ 2 migration_threshold 0" 2. Preload a table in passthrough mode dmsetup reload cache --table "0 262144 cache /dev/mapper/cmeta \ /dev/mapper/cdata /dev/mapper/corig 128 2 metadata2 passthrough smq 0" 3. Write to the first cache block to make it dirty fio --filename=/dev/mapper/cache --name=populate --rw=write --bs=4k \ --direct=1 --size=64k 4. Resume the inactive table. Now it's possible to load the dirty block into passthrough mode. dmsetup resume cache Fix by moving the checks to the preresume phase to support table preloading. Also remove the unused function dm_cache_metadata_all_clean. | ||||
| CVE-2026-48995 | 1 Pnpm | 1 Pnpm | 2026-06-26 | 7.5 High |
| pnpm is a package manager. Prior to 10.33.4 and 11.0.7, a malicious codeload.github.com server can serve whatever tarball it wants and pnpm will install it regardless of the lockfile. The lockfile does not store the hash of the dependencies from https://codeload.github.com. This means that if this server was compromised or a person's machine configuration was compromised, pnpm would download and install these dependencies. This vulnerability is fixed in 10.33.4 and 11.0.7. | ||||
| CVE-2026-11820 | 1 Redhat | 2 Community.general, Enterprise Linux | 2026-06-25 | 6.5 Medium |
| A flaw was found in the community.general Ansible collection's nexmo module. The module constructs HTTP requests to the Vonage/Nexmo SMS API by encoding API credentials (api_key and api_secret) into URL query parameters and sending them via GET requests. This causes credentials to be exposed in web server access logs, proxy logs, HTTP Referer headers, and network monitoring tools, despite the Ansible argument specification marking these parameters as no_log. An attacker with access to any of these logging or monitoring points can obtain the full API credentials and gain unauthorized access to the victim's Vonage/Nexmo account. | ||||
| CVE-2025-2586 | 1 Redhat | 1 Openshift Lightspeed | 2026-06-25 | 7.5 High |
| A flaw was found in the OpenShift Lightspeed Service, which is vulnerable to unauthenticated API request flooding. Repeated queries to non-existent endpoints inflate metrics storage and processing, consuming excessive resources. This issue can lead to monitoring system degradation, increased disk usage, and potential service unavailability. Since the issue does not require authentication, an external attacker can exhaust CPU, RAM, and disk space, impacting both application and cluster stability. | ||||
| CVE-2026-53218 | 1 Linux | 1 Linux Kernel | 2026-06-25 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: nft_exthdr: fix register tracking for F_PRESENT flag nft_exthdr_init() passes user-controlled priv->len to nft_parse_register_store(), which marks that many bytes in the register bitmap as initialized. However, when NFT_EXTHDR_F_PRESENT is set, the eval paths write only 1 byte (nft_reg_store8) or 4 bytes (*dest = 0 on TCP/DCCP error path). When len > 4, registers beyond the first are never written, retaining uninitialized stack data from nft_regs. Bail out if userspace requests too much data when F_PRESENT is set. | ||||
| CVE-2026-53269 | 1 Linux | 1 Linux Kernel | 2026-06-25 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: synproxy: add mutex to guard hook reference counting As the synproxy infrastructure register netfilter hooks on-demand when a user adds the first iptables target or nftables expression, if done concurrently they can race each other. Introduce a mutex to serialize the refcount control blocks access from both frontends. While a per namespace mutex might be more efficient, it is not needed for target/expression like SYNPROXY. | ||||
| CVE-2025-64309 | 1 Brightpick Ai | 1 Mission Control | 2026-06-25 | 7.4 High |
| The affected product discloses device telemetry, configuration, and sensitive information via WebSocket traffic to unauthenticated users when they connect to a specific URL. The unauthenticated URL can be discovered through basic network scanning techniques. | ||||
| CVE-2025-64307 | 1 Brightpick Ai | 1 Internal Logic Control | 2026-06-25 | 6.5 Medium |
| The Brightpick Internal Logic Control web interface is accessible without requiring user authentication. An unauthorized user could exploit this interface to manipulate robot control functions, including initiating or halting runners, assigning jobs, clearing stations, and deploying storage totes. | ||||
| CVE-2025-64308 | 1 Brightpick Ai | 1 Mission Control | 2026-06-25 | 6.5 Medium |
| The Brightpick Mission Control web application exposes hardcoded credentials in its client-side JavaScript bundle to Brightpick AI's documentation portal. | ||||
| CVE-2026-55180 | 1 Pnpm | 1 Pnpm | 2026-06-25 | 6.5 Medium |
| pnpm is a package manager. Prior to 10.34.2 and 11.5.3, pnpm and pacquet expanded ${ENV_VAR} placeholders from repository-controlled .npmrc and pnpm-workspace.yaml into registry request destinations and registry credentials. A malicious repository could cause dependency resolution to send victim environment secrets to an attacker-selected registry before lifecycle scripts run. This vulnerability is fixed in 10.34.2 and 11.5.3. | ||||
| CVE-2026-55487 | 1 Pnpm | 1 Pnpm | 2026-06-25 | 7.5 High |
| pnpm is a package manager. Prior to 10.34.2 and 11.5.3, the generic peer-suffix normalizer also stripped parenthesized text from git, URL, tarball, file, and other opaque locators. Approval for one source string could therefore authorize a different attacker-controlled source whose locator normalized to the same value. This vulnerability is fixed in 10.34.2 and 11.5.3. | ||||
| CVE-2026-55699 | 1 Pnpm | 1 Pnpm | 2026-06-25 | 6.5 Medium |
| pnpm is a package manager. Prior to 10.34.2 and 11.5.3, Manifest bin object keys such as "", ".", and ".." passed pnpm's bin-name guard. When a malicious package was installed globally, later global remove, update, or add-replacement flows could re-derive those names from the installed manifest and pass path.join(globalBinDir, binName) to removeBin. For "." this targets the global bin directory; for ".." this targets its parent. This vulnerability is fixed in 10.34.2 and 11.5.3. | ||||
| CVE-2026-55700 | 1 Pnpm | 1 Pnpm | 2026-06-25 | 7.1 High |
| pnpm is a package manager. From 11.3.0 until 11.5.3, `pnpm stage download` derived a local filename from registry-controlled package name and version fields. A crafted manifest could escape the selected download directory and overwrite another reachable file. The merged fix validates both fields, derives one safe filename, and verifies the final destination before writing. This vulnerability is fixed in 11.5.3. | ||||
| CVE-2026-50015 | 1 Pnpm | 1 Pnpm | 2026-06-25 | 7.3 High |
| pnpm is a package manager. Prior to 10.34.0 and 11.4.0, pnpm's patch application pipeline (@pnpm/patch-package) performs no path validation on file paths extracted from .patch files. An attacker who contributes a malicious patch file via a pull request can write attacker-controlled content to or delete arbitrary files on the filesystem during pnpm install, as the user running the install. The diff --git header paths containing ../../ sequences traverse out of the package directory, and the traversal is difficult to catch in code review because patch file diff headers are opaque to most reviewers. This vulnerability is fixed in 10.34.0 and 11.4.0. | ||||
| CVE-2026-12569 | 1 Ptc | 2 Flexplm, Windchill Pdmlink | 2026-06-25 | N/A |
| A critical remote code execution (RCE) vulnerability has been reported in PTC Windchill PDMlink and PTC FlexPLM. The vulnerability may be exploited through the deserialization of untrusted data. * This advisory also applies to all CPS versions * The identified vulnerability also impacts Windchill and FlexPLM releases prior to 11.0 M030 | ||||
| CVE-2026-49851 | 1 Lepture | 1 Mistune | 2026-06-25 | 7.5 High |
| Mistune is a Python Markdown parser with renderers and plugins. Prior to 3.3.0, Mistune is vulnerable to a CPU exhaustion DoS due to superlinear (approximately O(n²)) behavior in parse_link_text. When parsing Markdown containing many consecutive [ characters, parse_link_text repeatedly scans the input using a regex search inside a loop. Each iteration re-scans a large portion of the remaining string, resulting in quadratic-time behavior. An attacker-controlled Markdown input can therefore trigger excessive CPU usage with a very small payload. This vulnerability is fixed in 3.3.0. | ||||
| CVE-2026-53196 | 1 Linux | 1 Linux Kernel | 2026-06-25 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: USB: serial: io_ti: fix heap overflow in get_manuf_info() get_manuf_info() reads le16_to_cpu(rom_desc->Size) bytes from the device I2C EEPROM into a buffer allocated with kmalloc_obj(), which is sizeof(struct edge_ti_manuf_descriptor) = 10 bytes. The Size field comes from the device and is only validated (in check_i2c_image()) to make sure the descriptor fits within TI_MAX_I2C_SIZE (16384 bytes), not against the destination buffer size. A malicious USB device can therefore set Size to any value up to 16377, causing a heap overflow of up to 16367 bytes when plugged into a host running this driver. valid_csum() is called after read_rom() and also iterates buffer[0..Size-1], compounding the out-of-bounds access. Fix by rejecting descriptors with unexpected length before calling read_rom(). [ johan: amend commit message; also check for short descriptors ] | ||||