Export limit exceeded: 350525 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 350525 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (350525 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-43425 | 1 Linux | 1 Linux Kernel | 2026-05-11 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: usb: image: mdc800: kill download URB on timeout mdc800_device_read() submits download_urb and waits for completion. If the timeout fires and the device has not responded, the function returns without killing the URB, leaving it active. A subsequent read() resubmits the same URB while it is still in-flight, triggering the WARN in usb_submit_urb(): "URB submitted while active" Check the return value of wait_event_timeout() and kill the URB if it indicates timeout, ensuring the URB is complete before its status is inspected or the URB is resubmitted. Similar to - commit 372c93131998 ("USB: yurex: fix control-URB timeout handling") - commit b98d5000c505 ("media: rc: iguanair: handle timeouts") | ||||
| CVE-2026-43356 | 1 Linux | 1 Linux Kernel | 2026-05-11 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: iio: imu: adis: Fix NULL pointer dereference in adis_init The adis_init() function dereferences adis->ops to check if the individual function pointers (write, read, reset) are NULL, but does not first check if adis->ops itself is NULL. Drivers like adis16480, adis16490, adis16545 and others do not set custom ops and rely on adis_init() assigning the defaults. Since struct adis is zero-initialized by devm_iio_device_alloc(), adis->ops is NULL when adis_init() is called, causing a NULL pointer dereference: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 pc : adis_init+0xc0/0x118 Call trace: adis_init+0xc0/0x118 adis16480_probe+0xe0/0x670 Fix this by checking if adis->ops is NULL before dereferencing it, falling through to assign the default ops in that case. | ||||
| CVE-2026-7210 | 1 Python | 1 Cpython | 2026-05-11 | N/A |
| `xml.parsers.expat` and `xml.etree.ElementTree` use insufficient entropy for Expat hash-flooding protection, which allows a crafted XML document to trigger hash flooding.\r\n\r\nFully mitigating this vulnerability requires both updating libexpat to 2.8.0 or later and applying this patch. | ||||
| CVE-2026-43301 | 1 Linux | 1 Linux Kernel | 2026-05-11 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: media: chips-media: wave5: Fix PM runtime usage count underflow Replace pm_runtime_put_sync() with pm_runtime_dont_use_autosuspend() in the remove path to properly pair with pm_runtime_use_autosuspend() from probe. This allows pm_runtime_disable() to handle reference count cleanup correctly regardless of current suspend state. The driver calls pm_runtime_put_sync() unconditionally in remove, but the device may already be suspended due to autosuspend configured in probe. When autosuspend has already suspended the device, the usage count is 0, and pm_runtime_put_sync() decrements it to -1. This causes the following warning on module unload: ------------[ cut here ]------------ WARNING: CPU: 1 PID: 963 at kernel/kthread.c:1430 kthread_destroy_worker+0x84/0x98 ... vdec 30210000.video-codec: Runtime PM usage count underflow! | ||||
| CVE-2026-28907 | 1 Apple | 5 Ios And Ipados, Macos, Tvos and 2 more | 2026-05-11 | N/A |
| The issue was addressed with improved input validation. This issue is fixed in iOS 18.7.9 and iPadOS 18.7.9, iOS 26.5 and iPadOS 26.5, macOS Tahoe 26.5, tvOS 26.5, visionOS 26.5, watchOS 26.5. Processing maliciously crafted web content may prevent Content Security Policy from being enforced. | ||||
| CVE-2026-28826 | 1 Apple | 1 Macos | 2026-05-11 | 4 Medium |
| A logic issue was addressed with improved restrictions. This issue is fixed in macOS Sequoia 15.7.5, macOS Sonoma 14.8.5, macOS Tahoe 26.4. A malicious app may be able to break out of its sandbox. | ||||
| CVE-2023-42346 | 1 Alkacon | 1 Opencms | 2026-05-11 | 7.5 High |
| Alkacon OpenCms before 16 allows XXE when the <!DOCTYPE> refers to an external host. | ||||
| CVE-2025-14512 | 2 Gnome, Redhat | 4 Glib, Enterprise Linux, Hummingbird and 1 more | 2026-05-11 | 6.5 Medium |
| A flaw was found in glib. This vulnerability allows a heap buffer overflow and denial-of-service (DoS) via an integer overflow in GLib's GIO (GLib Input/Output) escape_byte_string() function when processing malicious file or remote filesystem attribute values. | ||||
| CVE-2025-14087 | 2 Gnome, Redhat | 3 Glib, Enterprise Linux, Hummingbird | 2026-05-11 | 5.6 Medium |
| A flaw was found in GLib (Gnome Lib). This vulnerability allows a remote attacker to cause heap corruption, leading to a denial of service or potential code execution via a buffer-underflow in the GVariant parser when processing maliciously crafted input strings. | ||||
| CVE-2025-40024 | 1 Linux | 1 Linux Kernel | 2026-05-11 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: vhost: Take a reference on the task in struct vhost_task. vhost_task_create() creates a task and keeps a reference to its task_struct. That task may exit early via a signal and its task_struct will be released. A pending vhost_task_wake() will then attempt to wake the task and access a task_struct which is no longer there. Acquire a reference on the task_struct while creating the thread and release the reference while the struct vhost_task itself is removed. If the task exits early due to a signal, then the vhost_task_wake() will still access a valid task_struct. The wake is safe and will be skipped in this case. | ||||
| CVE-2025-40023 | 1 Linux | 1 Linux Kernel | 2026-05-11 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/xe/vf: Don't expose sysfs attributes not applicable for VFs VFs can't read BMG_PCIE_CAP(0x138340) register nor access PCODE (already guarded by the info.skip_pcode flag) so we shouldn't expose attributes that require any of them to avoid errors like: [] xe 0000:03:00.1: [drm] Tile0: GT0: VF is trying to read an \ inaccessible register 0x138340+0x0 [] RIP: 0010:xe_gt_sriov_vf_read32+0x6c2/0x9a0 [xe] [] Call Trace: [] xe_mmio_read32+0x110/0x280 [xe] [] auto_link_downgrade_capable_show+0x2e/0x70 [xe] [] dev_attr_show+0x1a/0x70 [] sysfs_kf_seq_show+0xaa/0x120 [] kernfs_seq_show+0x41/0x60 (cherry picked from commit a2d6223d224f333f705ed8495bf8bebfbc585c35) | ||||
| CVE-2025-40021 | 1 Linux | 1 Linux Kernel | 2026-05-11 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: tracing: dynevent: Add a missing lockdown check on dynevent Since dynamic_events interface on tracefs is compatible with kprobe_events and uprobe_events, it should also check the lockdown status and reject if it is set. | ||||
| CVE-2025-40020 | 1 Linux | 1 Linux Kernel | 2026-05-11 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: can: peak_usb: fix shift-out-of-bounds issue Explicitly uses a 64-bit constant when the number of bits used for its shifting is 32 (which is the case for PC CAN FD interfaces supported by this driver). [mkl: update subject, apply manually] | ||||
| CVE-2025-40012 | 1 Linux | 1 Linux Kernel | 2026-05-11 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net/smc: fix warning in smc_rx_splice() when calling get_page() smc_lo_register_dmb() allocates DMB buffers with kzalloc(), which are later passed to get_page() in smc_rx_splice(). Since kmalloc memory is not page-backed, this triggers WARN_ON_ONCE() in get_page() and prevents holding a refcount on the buffer. This can lead to use-after-free if the memory is released before splice_to_pipe() completes. Use folio_alloc() instead, ensuring DMBs are page-backed and safe for get_page(). WARNING: CPU: 18 PID: 12152 at ./include/linux/mm.h:1330 smc_rx_splice+0xaf8/0xe20 [smc] CPU: 18 UID: 0 PID: 12152 Comm: smcapp Kdump: loaded Not tainted 6.17.0-rc3-11705-g9cf4672ecfee #10 NONE Hardware name: IBM 3931 A01 704 (z/VM 7.4.0) Krnl PSW : 0704e00180000000 000793161032696c (smc_rx_splice+0xafc/0xe20 [smc]) R:0 T:1 IO:1 EX:1 Key:0 M:1 W:0 P:0 AS:3 CC:2 PM:0 RI:0 EA:3 Krnl GPRS: 0000000000000000 001cee80007d3001 00077400000000f8 0000000000000005 0000000000000001 001cee80007d3006 0007740000001000 001c000000000000 000000009b0c99e0 0000000000001000 001c0000000000f8 001c000000000000 000003ffcc6f7c88 0007740003e98000 0007931600000005 000792969b2ff7b8 Krnl Code: 0007931610326960: af000000 mc 0,0 0007931610326964: a7f4ff43 brc 15,00079316103267ea #0007931610326968: af000000 mc 0,0 >000793161032696c: a7f4ff3f brc 15,00079316103267ea 0007931610326970: e320f1000004 lg %r2,256(%r15) 0007931610326976: c0e53fd1b5f5 brasl %r14,000793168fd5d560 000793161032697c: a7f4fbb5 brc 15,00079316103260e6 0007931610326980: b904002b lgr %r2,%r11 Call Trace: smc_rx_splice+0xafc/0xe20 [smc] smc_rx_splice+0x756/0xe20 [smc]) smc_rx_recvmsg+0xa74/0xe00 [smc] smc_splice_read+0x1ce/0x3b0 [smc] sock_splice_read+0xa2/0xf0 do_splice_read+0x198/0x240 splice_file_to_pipe+0x7e/0x110 do_splice+0x59e/0xde0 __do_splice+0x11a/0x2d0 __s390x_sys_splice+0x140/0x1f0 __do_syscall+0x122/0x280 system_call+0x6e/0x90 Last Breaking-Event-Address: smc_rx_splice+0x960/0xe20 [smc] ---[ end trace 0000000000000000 ]--- | ||||
| CVE-2025-40011 | 1 Linux | 1 Linux Kernel | 2026-05-11 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/gma500: Fix null dereference in hdmi teardown pci_set_drvdata sets the value of pdev->driver_data to NULL, after which the driver_data obtained from the same dev is dereferenced in oaktrail_hdmi_i2c_exit, and the i2c_dev is extracted from it. To prevent this, swap these calls. Found by Linux Verification Center (linuxtesting.org) with Svacer. | ||||
| CVE-2025-40010 | 1 Linux | 1 Linux Kernel | 2026-05-11 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: afs: Fix potential null pointer dereference in afs_put_server afs_put_server() accessed server->debug_id before the NULL check, which could lead to a null pointer dereference. Move the debug_id assignment, ensuring we never dereference a NULL server pointer. | ||||
| CVE-2025-40009 | 1 Linux | 1 Linux Kernel | 2026-05-11 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: fs/proc/task_mmu: check p->vec_buf for NULL When the PAGEMAP_SCAN ioctl is invoked with vec_len = 0 reaches pagemap_scan_backout_range(), kernel panics with null-ptr-deref: [ 44.936808] Oops: general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN NOPTI [ 44.937797] KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] [ 44.938391] CPU: 1 UID: 0 PID: 2480 Comm: reproducer Not tainted 6.17.0-rc6 #22 PREEMPT(none) [ 44.939062] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014 [ 44.939935] RIP: 0010:pagemap_scan_thp_entry.isra.0+0x741/0xa80 <snip registers, unreliable trace> [ 44.946828] Call Trace: [ 44.947030] <TASK> [ 44.949219] pagemap_scan_pmd_entry+0xec/0xfa0 [ 44.952593] walk_pmd_range.isra.0+0x302/0x910 [ 44.954069] walk_pud_range.isra.0+0x419/0x790 [ 44.954427] walk_p4d_range+0x41e/0x620 [ 44.954743] walk_pgd_range+0x31e/0x630 [ 44.955057] __walk_page_range+0x160/0x670 [ 44.956883] walk_page_range_mm+0x408/0x980 [ 44.958677] walk_page_range+0x66/0x90 [ 44.958984] do_pagemap_scan+0x28d/0x9c0 [ 44.961833] do_pagemap_cmd+0x59/0x80 [ 44.962484] __x64_sys_ioctl+0x18d/0x210 [ 44.962804] do_syscall_64+0x5b/0x290 [ 44.963111] entry_SYSCALL_64_after_hwframe+0x76/0x7e vec_len = 0 in pagemap_scan_init_bounce_buffer() means no buffers are allocated and p->vec_buf remains set to NULL. This breaks an assumption made later in pagemap_scan_backout_range(), that page_region is always allocated for p->vec_buf_index. Fix it by explicitly checking p->vec_buf for NULL before dereferencing. Other sites that might run into same deref-issue are already (directly or transitively) protected by checking p->vec_buf. Note: From PAGEMAP_SCAN man page, it seems vec_len = 0 is valid when no output is requested and it's only the side effects caller is interested in, hence it passes check in pagemap_scan_get_args(). This issue was found by syzkaller. | ||||
| CVE-2025-40008 | 1 Linux | 1 Linux Kernel | 2026-05-11 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: kmsan: fix out-of-bounds access to shadow memory Running sha224_kunit on a KMSAN-enabled kernel results in a crash in kmsan_internal_set_shadow_origin(): BUG: unable to handle page fault for address: ffffbc3840291000 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 1810067 P4D 1810067 PUD 192d067 PMD 3c17067 PTE 0 Oops: 0000 [#1] SMP NOPTI CPU: 0 UID: 0 PID: 81 Comm: kunit_try_catch Tainted: G N 6.17.0-rc3 #10 PREEMPT(voluntary) Tainted: [N]=TEST Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.17.0-0-gb52ca86e094d-prebuilt.qemu.org 04/01/2014 RIP: 0010:kmsan_internal_set_shadow_origin+0x91/0x100 [...] Call Trace: <TASK> __msan_memset+0xee/0x1a0 sha224_final+0x9e/0x350 test_hash_buffer_overruns+0x46f/0x5f0 ? kmsan_get_shadow_origin_ptr+0x46/0xa0 ? __pfx_test_hash_buffer_overruns+0x10/0x10 kunit_try_run_case+0x198/0xa00 This occurs when memset() is called on a buffer that is not 4-byte aligned and extends to the end of a guard page, i.e. the next page is unmapped. The bug is that the loop at the end of kmsan_internal_set_shadow_origin() accesses the wrong shadow memory bytes when the address is not 4-byte aligned. Since each 4 bytes are associated with an origin, it rounds the address and size so that it can access all the origins that contain the buffer. However, when it checks the corresponding shadow bytes for a particular origin, it incorrectly uses the original unrounded shadow address. This results in reads from shadow memory beyond the end of the buffer's shadow memory, which crashes when that memory is not mapped. To fix this, correctly align the shadow address before accessing the 4 shadow bytes corresponding to each origin. | ||||
| CVE-2025-40007 | 1 Linux | 1 Linux Kernel | 2026-05-11 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: netfs: fix reference leak Commit 20d72b00ca81 ("netfs: Fix the request's work item to not require a ref") modified netfs_alloc_request() to initialize the reference counter to 2 instead of 1. The rationale was that the requet's "work" would release the second reference after completion (via netfs_{read,write}_collection_worker()). That works most of the time if all goes well. However, it leaks this additional reference if the request is released before the I/O operation has been submitted: the error code path only decrements the reference counter once and the work item will never be queued because there will never be a completion. This has caused outages of our whole server cluster today because tasks were blocked in netfs_wait_for_outstanding_io(), leading to deadlocks in Ceph (another bug that I will address soon in another patch). This was caused by a netfs_pgpriv2_begin_copy_to_cache() call which failed in fscache_begin_write_operation(). The leaked netfs_io_request was never completed, leaving `netfs_inode.io_count` with a positive value forever. All of this is super-fragile code. Finding out which code paths will lead to an eventual completion and which do not is hard to see: - Some functions like netfs_create_write_req() allocate a request, but will never submit any I/O. - netfs_unbuffered_read_iter_locked() calls netfs_unbuffered_read() and then netfs_put_request(); however, netfs_unbuffered_read() can also fail early before submitting the I/O request, therefore another netfs_put_request() call must be added there. A rule of thumb is that functions that return a `netfs_io_request` do not submit I/O, and all of their callers must be checked. For my taste, the whole netfs code needs an overhaul to make reference counting easier to understand and less fragile & obscure. But to fix this bug here and now and produce a patch that is adequate for a stable backport, I tried a minimal approach that quickly frees the request object upon early failure. I decided against adding a second netfs_put_request() each time because that would cause code duplication which obscures the code further. Instead, I added the function netfs_put_failed_request() which frees such a failed request synchronously under the assumption that the reference count is exactly 2 (as initially set by netfs_alloc_request() and never touched), verified by a WARN_ON_ONCE(). It then deinitializes the request object (without going through the "cleanup_work" indirection) and frees the allocation (with RCU protection to protect against concurrent access by netfs_requests_seq_start()). All code paths that fail early have been changed to call netfs_put_failed_request() instead of netfs_put_request(). Additionally, I have added a netfs_put_request() call to netfs_unbuffered_read() as explained above because the netfs_put_failed_request() approach does not work there. | ||||
| CVE-2025-40006 | 1 Linux | 1 Linux Kernel | 2026-05-11 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: mm/hugetlb: fix folio is still mapped when deleted Migration may be raced with fallocating hole. remove_inode_single_folio will unmap the folio if the folio is still mapped. However, it's called without folio lock. If the folio is migrated and the mapped pte has been converted to migration entry, folio_mapped() returns false, and won't unmap it. Due to extra refcount held by remove_inode_single_folio, migration fails, restores migration entry to normal pte, and the folio is mapped again. As a result, we triggered BUG in filemap_unaccount_folio. The log is as follows: BUG: Bad page cache in process hugetlb pfn:156c00 page: refcount:515 mapcount:0 mapping:0000000099fef6e1 index:0x0 pfn:0x156c00 head: order:9 mapcount:1 entire_mapcount:1 nr_pages_mapped:0 pincount:0 aops:hugetlbfs_aops ino:dcc dentry name(?):"my_hugepage_file" flags: 0x17ffffc00000c1(locked|waiters|head|node=0|zone=2|lastcpupid=0x1fffff) page_type: f4(hugetlb) page dumped because: still mapped when deleted CPU: 1 UID: 0 PID: 395 Comm: hugetlb Not tainted 6.17.0-rc5-00044-g7aac71907bde-dirty #484 NONE Hardware name: QEMU Ubuntu 24.04 PC (i440FX + PIIX, 1996), BIOS 0.0.0 02/06/2015 Call Trace: <TASK> dump_stack_lvl+0x4f/0x70 filemap_unaccount_folio+0xc4/0x1c0 __filemap_remove_folio+0x38/0x1c0 filemap_remove_folio+0x41/0xd0 remove_inode_hugepages+0x142/0x250 hugetlbfs_fallocate+0x471/0x5a0 vfs_fallocate+0x149/0x380 Hold folio lock before checking if the folio is mapped to avold race with migration. | ||||